Database Info

Syncing Prolbems Please Helpp!!!

ok so I have a cingular 8125 which i CID unlocked and SIM unlocked. I have the T-mobil 2.26 as a ROM base and was running black dimond 1.0 touch ROM with no syncing prolbems. This past weekend my phone froze and i wasnt able to reset it, so i re flashed my base rom. I then tried to Flash the new dimond 2.0 touch rom and it flashed fine, but when i went to sync it up all it did was say it was syncing. I let it run over night and it was in the same state (saying it was syncing) that i left it in. I tried flashing another custom rom but ended up with the same result. I tried deleting active sync 4.5 and re-installing, and even tried a beta version of 4.5 but nothing has worked. PLease any help would be much appreciated. Thanks in advanced.

could be outlook...outlook sometimes acts finicky...
recommendation would be to save your pim information...it's usually in some sort of personal folder, and then reinstall outlook. Move your pim information back and resync.

I had this same problem, but i fixed it.
I had this same problem using Diamond 1.1, so i thought it was the rom, but....Then, I used Octavoi, and I had the same problem, so i figured it was Windows Vista's Device Center (replaces ActiveSync), but... Then I found out that it stilled synced fine on my XP laptop (ActivSync 4.5), so.... i woke up one night and suddenly decided to remove my USB hub that my phone was connected through, and then I directly connected my phone to my computer (which actually gives it a direct undivided power source, it seems). After this, it synced in 4 minutes, and i finally got all my contacts back. Could this possibly be your case as well? That's all i can offer.

nope im this isnt my prolbem. and i cant find that folder that you were talking about on out look either. i tried flashing a bunch of diff roms but all it does is say its syncing and then my comp sends nothing? any more ideas would be greatly appreciated. thanks

martystoked said:
nope im this isnt my prolbem. and i cant find that folder that you were talking about on out look either. i tried flashing a bunch of diff roms but all it does is say its syncing and then my comp sends nothing? any more ideas would be greatly appreciated. thanks
Click to expand...
Click to collapse
Hi,
try to disconnect firewall or antivirus programs.

tried it. i acutally just tried syncing on another computer and it works. any thoughts on why it wont work for my comp, when it did before?? or how to transfer my contacts from one comp to another so i can at least get them on my phone??? thanks guys

martystoked said:
tried it. i acutally just tried syncing on another computer and it works. any thoughts on why it wont work for my comp, when it did before?? or how to transfer my contacts from one comp to another so i can at least get them on my phone??? thanks guys
Click to expand...
Click to collapse
Use PIMBackup, it saves and restores that information and more (which you can choose from)... i think it's free, it came with my ROM (Octavaoi 4.5), so u might search for it.

i would uninstall some stuff with your phone unplugged and reboot it then reconnect it and make sure that the usb cord or jack is working

Betcha I had it worse...
I'm a total newb to this stuff. I'm totally blown away by the level you folks are discussing thing at.
I just replaced my Audiovox 6600 with a Cingular 8125 w/WM6. I had to upgrade to Activesync 4.5 and it was going exactly what you describe.
I SPENT OVER 8 HOURS ON THE PHONE WITH THE MICROSOFT "HELP" if you can call it that.
The rapimgr.exe file was getting caught in a loop and hogging all the CPU. The answer was in:
Settings --> Connections --> USB to PC -->: Uncheck the "Enable advanced network funcionality" box
BTW - after the marathon "help" session, I was the one that figured it out.

gwydionjhr said:
I'm a total newb to this stuff. I'm totally blown away by the level you folks are discussing thing at.
I just replaced my Audiovox 6600 with a Cingular 8125 w/WM6. I had to upgrade to Activesync 4.5 and it was going exactly what you describe.
I SPENT OVER 8 HOURS ON THE PHONE WITH THE MICROSOFT "HELP" if you can call it that.
The rapimgr.exe file was getting caught in a loop and hogging all the CPU. The answer was in:
Settings --> Connections --> USB to PC -->: Uncheck the "Enable advanced network funcionality" box
BTW - after the marathon "help" session, I was the one that figured it out.
Click to expand...
Click to collapse
Ok...props to you. First post and it's to help someone else with a well described solution. I hope this solves the person's problem and I'll have to remember to suggest this to folks having activesync issues... so much for "advanced network functionality" huh?

thanks alot... tried to fix this for 2 days. big props to you..

[Q] HTC Mozart From Telstra stuck in a Demo mode??

Hi,
I've receieved a HTC Mozart as an evaluation device from Telstra for my company, but when I boot it up it does not seem to go through the normal setup process.
It boots and when it is pre-populated with some data such as contacts, text messages, emails, calander entries, etc. I have hard reset the device and it comes back to the same place after it goes through the loading process, at no stage am i prompted to enter my windows live ID or anything like that and there is already an example account present.
Is this some sort of demonstration mode the phone is set in???
Thanks,
Ryan

i would suggest contacting telstra? maybe they sent you a demo model by mistake? though to be honest if this was that case that would be one of the most funniest things they could do to a customer. it was just halloween? didn't you give them a treat?

The Gate Keeper said:
didn't you give them a treat?
Click to expand...
Click to collapse
We all know Sol took all the treats with him when he left LOL

Everytime i unlock the phone it get a text message that tells me welcome to windows phone 7 and the screen saver is a demo that says 'touch to begin' and I am unable to use my windows live login as there is an account called [email protected] that cannot be deleted and cannot be changed.

Try flashing the std ruu package from the mozart forum? Might have a demo rom on it.

Are you able to hard reset it?
If not then contact Telstra and they should replace it.

How do I install the generic RUU on the mozart? I have been a blackberry user previously.

Mate, dont bother, take it back to telstra.

otech said:
Mate, dont bother, take it back to telstra.
Click to expand...
Click to collapse
rybriggs said:
How do I install the generic RUU on the mozart? I have been a blackberry user previously.
Click to expand...
Click to collapse
rybriggs said:
Everytime i unlock the phone it get a text message that tells me welcome to windows phone 7 and the screen saver is a demo that says 'touch to begin' and I am unable to use my windows live login as there is an account called [email protected] that cannot be deleted and cannot be changed.
Click to expand...
Click to collapse
It Would seem not all people actually read the questions in these forums very well - having acquired one of these STORE DEMO ROM Mozarts as well I know exactly what you are saying - Mate - Check my post Under the Telstra ROM in the ROM section of Mozart Development Forum. Should be around post 3.
This is how I reflashed/unlocked from store demo mode and now have a fully functioning HTC Mozart.
Should help you out.

I believe i purchased a store demo HTC Surround, as it does exactly what you describe your mozart doing. I hope soon there will be a way to flash the rom because my battery dies from all the bogus updates and the screensaver or splash screen. any help would be greatly appreciated.

Yes, anyone here please plz plz plz help us out with this annoying thing ever. ....
GREAT GREATLY Appreciate ... it makes me piss off !!!

It's amazing how many of these demo phones make it out in the real world.

ngphucok said:
Yes, anyone here please plz plz plz help us out with this annoying thing ever. ....
GREAT GREATLY Appreciate ... it makes me piss off !!!
Click to expand...
Click to collapse
just flash a new rom http://forum.xda-developers.com/showthread.php?t=807801
Amsim said:
Through work aquired a Mozart with Telstra Demo(Store) Rom. Very furstrating as it wouldnt hold settings and kept playing that damn video.....
Downloaded this rom (following the links from here and trying a few download mirrors until I found one that worked)
Turned off Phone
Held Volume Down Key while Pressing Power Button (This turns the phone on and launched Bootloader)
Connected to PC Waited about 5 minutes while Windows auto detected the drivers and installed what it needed
Right Mouse clicked on the downloaded Rom and selected "Run as Administrator"
Followed the prompts.
****NOTE**** When it got to 10% the phone rebooted - LET IT!!!!! DO NOT TOUCH IT DO NOT DISCONNECT IT - Just wait -The computer will redetect and about 10 Min later VIOLA - All sorted nice and clean WP7 HTC Mozart (with a with Telstra One Hub - which aint that bad) - Whacked the 3 Sim card in - Downloaded Connection Setup Wizard from market place and a few minutes later was sending and receiving MMS etc
Thanks for the ROM
Click to expand...
Click to collapse

Same thing here, i got an optimus 7 (LG) though and there are no roms around so i can flash it. bummer...

[Q] bluetooth discovery

i transfer a fair few files over bluetooth to the sensation but i noticed i have to make my device discoverable every time (by checking the make discoverable option) i was wondering is there a way for this to be constantly on? ie. when i turn my bluetooth toggle on, the phone will always be ready to be discovered?
cheers

Where are you sending them from? A pc? Set the ftp settings in the bluetooth settings on the phone. Also, there should've been an option to always allow when you sent the 1st file.
ツ

The_Biz said:
Where are you sending them from? A pc? Set the ftp settings in the bluetooth settings on the phone.
ツ
Click to expand...
Click to collapse
yes a pc... windows 7 x64... i have ZERO problems transferring files and these work perfectly.. as for the ftp i can turn it on or turn it off.. never had any contact with this so not sure what you mean?
The_Biz said:
Also, there should've been an option to always allow when you sent the 1st file.
ツ
Click to expand...
Click to collapse
as for this... thats what i thought (like an auto connect) it seems to need to discover the device each time before the file Q pops up on the device to be accepted, etc...
what would be great would be a way to send the file... not have the device need to connect or be accepted each time but my OP is my main annoyance lol

Go to the devices option on the pc, find the phone, right click, delete it. The go to the devices on the sensation and click the pc, unpair it. Also, go to the advanced setting in bt and select the ftp option. Now, on the pc - look for new devices and make sure the phone is discoverable. Let the pc find the phone. When they find each other, w7 should have you put a code in the phone, do it to and on 1st transfer, Inc Oh should be prompted on the phone the. Always allows.
Hope that helps.
ツ

Download Bluetooth discovery widget?

The_Biz said:
Go to the devices option on the pc, find the phone, right click, delete it. The go to the devices on the sensation and click the pc, unpair it. Also, go to the advanced setting in bt and select the ftp option. Now, on the pc - look for new devices and make sure the phone is discoverable. Let the pc find the phone. When they find each other, w7 should have you put a code in the phone, do it to and on 1st transfer, Inc Oh should be prompted on the phone the. Always allows.
Hope that helps.
ツ
Click to expand...
Click to collapse
that definitely seemed to fix the problem files transfer straight away.. i noticed not into a separate bluetooth folder but that would seem to be due to the ftp setting but that is not a problem and makes them easier to find anyway... great thanks for the help.. thanks button hit!

joshndroid said:
that definitely seemed to fix the problem files transfer straight away.. i noticed not into a separate bluetooth folder but that would seem to be due to the ftp setting but that is not a problem and makes them easier to find anyway... great thanks for the help.. thanks button hit!
Click to expand...
Click to collapse
Glad it worked. Thanks for the thanks.

Android 4.1.1 Jellybean on the Nextbook Premium 8se

ATTENTION / WARNING / ACHTUNG!!!!!!!
Efun (distributor of what we know as the "Nextbook Premium 8SE") in fact sells two different tablets marketed under the same name. This rooting method will ONLY work with a Nextbook Premium 8SE running a Rockchip processor.
**Am very sorry if this has already been posted, searched and did not find anything.**
Soon after purchasing my Nextbook Premium 8 se I learned that many Roms, apks, etc. that I couldn't find via Google (in English, anyhow) are easily found in Italian.
Which brings me to what I found today
androidworldDOTit/forum/mediacom-smartpad-810c-381/%5Brom%5D%5Bics-4-1-1%5D%5Bxteam-4-0-jellybean%5D%5Bmediacom-810c%5D-67171/
Run that through Google Translate if like me you don't speak a word of Italian.
All right, time to sit down and write a guide to doing this. First things first: I didn't do any of this work! People like Devmonkey, Sunnyboy167, deeno33, and FinlessBob, (over at Freaktab) and Xteam at Android World Italy are the ones who've put in the legwork and hours to make this stuff possible. I'm just gathering their work in to one place.
Before you begin: Back up all your things if you want to keep them!
Also, remove your micro sd card from the Nextbook. I darn near fried mine because I didn't.
Next: You know the drill. You're a big boy, (or girl, or whatever. I'm not here to judge) I, nor anyone else is responsible if anything bad happens to your device, to you, your happiness, or your hard earned money or your time. YOU are choosing to root your device and install Jellybean on to it and YOU assume all responsibility. Cool? Also, this will probably void your warranty. But let's face it, if you're here, you probably don't care too much about your warranty anyway. Let's get rocking.
STEP 1: Make sure you have the device drivers installed for your Nextbook on your computer. I'm using a Windows 7 64 bit desktop. I imagine that other Windows desktops pre Win 8 will be similar. If you're using Linux, I believe that drivers aren't necessary. But hey, if you've installed Ubuntu, Arch Bang, Puppy, etc, you've probably got this figured out anyway.
Turn off your Nextbook Tablet Connect the micro usb cord to it, then hold in the volume up and down keys while plugging it in to your computer.
"NOTE: On your screen you should see a bubble pop up in the lower-right corner saying "Installing drivers". Most likely it will say it can't find the drivers. This is normal. Continue following the steps to install the missing drivers.
Step 2: Open the Device manager by typing mmc devmgmt.msc into your "Run" box on XP or search box in start menu on Windows 7 and hitting enter (you can also find Device Manager in your Control Panel options in Windows 7).
Step 3: With your N8 still in an off state and plugged in via USB you should see a yellow exclamation symbol somewhere next to "Unknown Device" in the list of devices in the Device Manager. Right click on it and select "Update driver software".
Step 4: Now it will prompt you to choose how you want to search for it. Select "Browse my computer for driver software" and it will bring up a window for you to navigate manually to the driver location which is in the "drivers" sub-folder in the NEXTBOOK8ROOT folder. Select which ever system you have (32bit or 64bit) and then hit "OK". You might go thru one or two prompts before it actually installs. Just "OK" everything and you should be fine." ~Sunnyboy167
Ok, now that the device drivers are installed you'll want to download the file linked from here: zippyshareDOTcom/v/60864398/fileDOThtml
Sorry, I have less than 10 posts, so you'll need to convert the dots to, you know, dots. I get why the site does that.
Scan that thing for any nasties, and then unzip it wherever you'd like. (I used my desktop) Open it and click on the folder "Mediacom 810c" Inside you'll find a file named "Rk29update.exe." Open it. You'll see a box like this:
See attached picture
That is what it will look like if your tablet is not hooked up to your computer. So if it isn't (which it should be, since I never told you to disconnect it) reconnect it now.
Click the box that says "loader," then click "Formatta!!" Which, as you might have guessed is Italian for "Format." No going back now, kid.
Let the thing run its course, it'll take a couple of minutes. Once it's done, click the box that says "Aggiorna!!" This will install Jellybean on to your Nextbook. Be patient, as this will take a few minutes. You'll hear your computer make the "device disconnected" sound, and you'll be all set. You can unplug your Nextbook from your computer now.
First boot up of the device on Jellybean was a touch slow for me, but don't panic. Once you've gotten through set up the Rom runs incredibly smooth and fast. The first screen you'll see will be the welcome (benvenuto) screen. You can select English (or your preferred language) from the drop down menu. From this point on it should be smooth sailing. Google Now works like a charm, Project Butter seems to really make a difference on this tablet, camera works, notifications work, everything seems good. There are minor bugs here and there, but nothing Earth shattering.
One last thing: for a $99 budget "craplet" from Big Lots, you could do a lot worse than this tablet. I've found it pretty sturdy, highly customizable, and generally responsive and fun to use. I also own a Nexus 7, and while this clearly can't touch it spec wise, it's definitely a fun second device to keep around.

ok, so far so good. The Rom is very responsive, Google Now is working well. Only thing to note, which I should have known: Take out your micro sd card first! I ended up corrupting mine when I flashed the Rom. (And guess where I had everything backed up too? = fail)
But again, other than that, this Rom is awesome

Request for Bug List
Thanks for posting about this Italian Rom for the Nextbook 8. I am thinking about installing it. Can you provide a list of bugs that you've noticed?
Thanks again!
Shaun

shaunmt said:
Thanks for posting about this Italian Rom for the Nextbook 8. I am thinking about installing it. Can you provide a list of bugs that you've noticed?
Thanks again!
Shaun
Click to expand...
Click to collapse
of course!
As mentioned in the install guide, take out any MicroSD card, as you might damage it. That said, however, upon another reading of the original Italian install guide, apparently the "data system corrupted" bug that I took for being my MSD card being screwed up is in fact a known bug that is actually affecting internal memory, but only temporarily. The solution is to simply format it on device, and everything will work fine. The option to format is given as a push notification immediately upon getting through the sign in process, and nothing in actuality appears to be damaged, but until I did the format I could not access anything on my MSD card.
The big recurring one I've noticed may or may not be unique to this Rom, as my device had it before on a gingerbread Rom; namely, the battery charge level never seems to change. It always seems to be at 100% right up until it drops dead, no warning. Actually, that's not entirely accurate, because if it runs out, and I charge it and unplug while the charge shows a number less than 100% the battery icon will continue to show "charging" until 100% (even though unplugged) and then stay there.
When waking the tablet up it takes a couple of seconds to reconnect to wifi. Any notifications coming in will slow it down for up to a couple of minutes. I've noticed that if I try and use it during this time I occasionally "overload" the device, and end up with it rebooting. My best advice: wake it, give it a second to go from "no internet connection" to having found wifi, unlock the screen, and then wait about 1 minute before doing any heavy use until any notifications pop up; once you do that you're good to go.
If I think of or notice anything else hopefully I'll remember to edit this post.

2 Problems I found
Conect11 said:
of course!
As mentioned in the install guide, take out any MicroSD card, as you might damage it. That said, however, upon another reading of the original Italian install guide, apparently the "data system corrupted" bug that I took for being my MSD card being screwed up is in fact a known bug that is actually affecting internal memory, but only temporarily. The solution is to simply format it on device, and everything will work fine. The option to format is given as a push notification immediately upon getting through the sign in process, and nothing in actuality appears to be damaged, but until I did the format I could not access anything on my MSD card.
The big recurring one I've noticed may or may not be unique to this Rom, as my device had it before on a gingerbread Rom; namely, the battery charge level never seems to change. It always seems to be at 100% right up until it drops dead, no warning. Actually, that's not entirely accurate, because if it runs out, and I charge it and unplug while the charge shows a number less than 100% the battery icon will continue to show "charging" until 100% (even though unplugged) and then stay there.
When waking the tablet up it takes a couple of seconds to reconnect to wifi. Any notifications coming in will slow it down for up to a couple of minutes. I've noticed that if I try and use it during this time I occasionally "overload" the device, and end up with it rebooting. My best advice: wake it, give it a second to go from "no internet connection" to having found wifi, unlock the screen, and then wait about 1 minute before doing any heavy use until any notifications pop up; once you do that you're good to go.
If I think of or notice anything else hopefully I'll remember to edit this post.
Click to expand...
Click to collapse
After I leave it charging, it goes into the sleep of death I guess? I don't know if this is because I had some apps downloading in the background. Also, my auto rotate doesn't work. I don't know if there's a fix for it, but so far, I havent found any
but besides those 2 things, the rom works great!

I'm having a hell of a time getting drivers for Windows 7 installed. Can someone point me in the direction to the drivers and possibly driver install instructions? .
I have tried with and without USB debugging turned on. In device manager I see M3-chip with USB debugging on. The only thing I can figure is I have the wrong drivers.
I have a Nextbook Premium 8 SE.
TIA

need new drivers
ardy said:
I'm having a hell of a time getting drivers for Windows 7 installed. Can someone point me in the direction to the drivers and possibly driver install instructions? .
I have tried with and without USB debugging turned on. In device manager I see M3-chip with USB debugging on. The only thing I can figure is I have the wrong drivers.
I have a Nextbook Premium 8 SE.
TIA
Click to expand...
Click to collapse
Im having the same problem need help here guys i just got mine yesterday it looks like the newer ones has different software in them or are updated.in drivers it only shows m3-chip and will not in stall on window 7 or xp.

Link is broken
Conect11 said:
ok, so far so good. The Rom is very responsive, Google Now is working well. Only thing to note, which I should have known: Take out your micro sd card first! I ended up corrupting mine when I flashed the Rom. (And guess where I had everything backed up too? = fail)
But again, other than that, this Rom is awesome
Click to expand...
Click to collapse
Hi Connect11 great job and thanks for collecting the information for us, can you please provide a new link because the current link is broken, I want to test on my Nextbook 8SE.

arnelpabustan said:
Hi Connect11 great job and thanks for collecting the information for us, can you please provide a new link because the current link is broken, I want to test on my Nextbook 8SE.
Click to expand...
Click to collapse
Good job gettin stuff together...i been trying to make it easier for folks to understand all this in the official nextbook 8se root thread. Info is so jumbled and most people dont read through the thread far enough to make sense of what they've just downloaded...lolz. anyways good work and heres a link to another great JB rom for this tab....big props to OMA for his work on this. I been runnin it for a 2 months now and i love it!! http://forum.xda-developers.com/showthread.php?t=1903745 This one can be tricky with the kernel and the system image so please follow directions carefully if you decide to try this rom...i had issues with bricks (my fault of course) but nothing the rk flasher tool cant fix. And of course backup, backup, backup, nuff said:laugh:
---------- Post added at 07:55 PM ---------- Previous post was at 07:53 PM ----------
A bit off topic but im curious as to what recovery other nextbook 8se owners are using?? Any input would be greatly appreciated.

How to root my Xperia u st25i?? Pls help me
Sent from my ST25i using xda app-developers app

Help!
"STEP 1: Make sure you have the device drivers installed for your Nextbook on your computer.[/B] I'm using a Windows 7 64 bit desktop. I imagine that other Windows desktops pre Win 8 will be similar. If you're using Linux, I believe that drivers aren't necessary. But hey, if you've installed Ubuntu, Arch Bang, Puppy, etc, you've probably got this figured out anyway."
I'm stuck on this step! How do I find and install the drivers for the Nextbook 8? I went to the Device Manager already, I found my "Unknown Device", and I picked "browse my computer for driver software", but every time I pick the file to update it from, it says "windows could not find driver software for your device". Please help me!

thank you for the rom I'll give it a try

Nextbook Premium 7
Do they have jelly bean on Nextbook Premium 7.

cant turn on
hey, i turned my tablet off, and now it wont turn on :crying: I dont know if I'm doing something wrong, but it just wont power on... any help would be great!

deanfranks21 said:
hey, i turned my tablet off, and now it wont turn on :crying: I dont know if I'm doing something wrong, but it just wont power on... any help would be great!
Click to expand...
Click to collapse
Same thing happened to me, you'll just have to wait a day or two for the battery to completely die, then hold the power, and as soon as the screen comes on, plug it in, hope this helps! :good:

so far so good, g-sensor wouldnt work with both included kernels so i flashed the kernel from Finless Bob's ICS Rom for NEXT8P12 and it's working again except i cant use the OC settings that kernel from this ROM has.
Only issues:
Wifi is a bit inconsistent
Apps can't download to system memory, there has to be an sd card present
G-Sensor isnt working (have to use kernel from Finless Bob's Next8P12 ROM)
Nothing else yet
is there anyway i could use the g-sensor driver from the other kernel while still using the kernel from this rom, if that makes sense.
Thanx.

going great untill
cant find subfoldr NXTBOOK8ROOT in my computer aso the zippyshare file in the link doesnt work pleaase help
---------- Post added at 04:18 PM ---------- Previous post was at 04:13 PM ----------
deanfranks21 said:
hey, i turned my tablet off, and now it wont turn on :crying: I dont know if I'm doing something wrong, but it just wont power on... any help would be great!
Click to expand...
Click to collapse
there shul be a reset button in the back of the device if not you can boot it into recovery mode by holding the power key and voulme down key AT THE SAME TIME then u can wipe everythng and reboot your device:good:

midnite48161 said:
Im having the same problem need help here guys i just got mine yesterday it looks like the newer ones has different software in them or are updated.in drivers it only shows m3-chip and will not in stall on window 7 or xp.
Click to expand...
Click to collapse
Same here
Sent from my Next8P12 using XDA Premium HD app

swordjamie said:
Same here
Sent from my Next8P12 using XDA Premium HD app
Click to expand...
Click to collapse
Same for me as well... and it's really annoying me... I can't root it... so until someone finds a fix... I guess we're going to have to wait, also every time I go the whole driver thing, it says it can't find the drivers too. I don't really care to root it... but... I just wanted to try it.

Conect11 said:
ATTENTION / WARNING / ACHTUNG!!!!!!!
Efun (distributor of what we know as the "Nextbook Premium 8SE") in fact sells two different tablets marketed under the same name. This rooting method will ONLY work with a Nextbook Premium 8SE running a Rockchip processor.
**Am very sorry if this has already been posted, searched and did not find anything.**
Soon after purchasing my Nextbook Premium 8 se I learned that many Roms, apks, etc. that I couldn't find via Google (in English, anyhow) are easily found in Italian.
Which brings me to what I found today
androidworldDOTit/forum/mediacom-smartpad-810c-381/%5Brom%5D%5Bics-4-1-1%5D%5Bxteam-4-0-jellybean%5D%5Bmediacom-810c%5D-67171/
Run that through Google Translate if like me you don't speak a word of Italian.
All right, time to sit down and write a guide to doing this. First things first: I didn't do any of this work! People like Devmonkey, Sunnyboy167, deeno33, and FinlessBob, (over at Freaktab) and Xteam at Android World Italy are the ones who've put in the legwork and hours to make this stuff possible. I'm just gathering their work in to one place.
Before you begin: Back up all your things if you want to keep them!
Also, remove your micro sd card from the Nextbook. I darn near fried mine because I didn't.
Next: You know the drill. You're a big boy, (or girl, or whatever. I'm not here to judge) I, nor anyone else is responsible if anything bad happens to your device, to you, your happiness, or your hard earned money or your time. YOU are choosing to root your device and install Jellybean on to it and YOU assume all responsibility. Cool? Also, this will probably void your warranty. But let's face it, if you're here, you probably don't care too much about your warranty anyway. Let's get rocking.
STEP 1: Make sure you have the device drivers installed for your Nextbook on your computer. I'm using a Windows 7 64 bit desktop. I imagine that other Windows desktops pre Win 8 will be similar. If you're using Linux, I believe that drivers aren't necessary. But hey, if you've installed Ubuntu, Arch Bang, Puppy, etc, you've probably got this figured out anyway.
Turn off your Nextbook Tablet Connect the micro usb cord to it, then hold in the volume up and down keys while plugging it in to your computer.
"NOTE: On your screen you should see a bubble pop up in the lower-right corner saying "Installing drivers". Most likely it will say it can't find the drivers. This is normal. Continue following the steps to install the missing drivers.
Step 2: Open the Device manager by typing mmc devmgmt.msc into your "Run" box on XP or search box in start menu on Windows 7 and hitting enter (you can also find Device Manager in your Control Panel options in Windows 7).
Step 3: With your N8 still in an off state and plugged in via USB you should see a yellow exclamation symbol somewhere next to "Unknown Device" in the list of devices in the Device Manager. Right click on it and select "Update driver software".
Step 4: Now it will prompt you to choose how you want to search for it. Select "Browse my computer for driver software" and it will bring up a window for you to navigate manually to the driver location which is in the "drivers" sub-folder in the NEXTBOOK8ROOT folder. Select which ever system you have (32bit or 64bit) and then hit "OK". You might go thru one or two prompts before it actually installs. Just "OK" everything and you should be fine." ~Sunnyboy167
Ok, now that the device drivers are installed you'll want to download the file linked from here: zippyshareDOTcom/v/60864398/fileDOThtml
Sorry, I have less than 10 posts, so you'll need to convert the dots to, you know, dots. I get why the site does that.
Scan that thing for any nasties, and then unzip it wherever you'd like. (I used my desktop) Open it and click on the folder "Mediacom 810c" Inside you'll find a file named "Rk29update.exe." Open it. You'll see a box like this:
See attached picture
That is what it will look like if your tablet is not hooked up to your computer. So if it isn't (which it should be, since I never told you to disconnect it) reconnect it now.
Click the box that says "loader," then click "Formatta!!" Which, as you might have guessed is Italian for "Format." No going back now, kid.
Let the thing run its course, it'll take a couple of minutes. Once it's done, click the box that says "Aggiorna!!" This will install Jellybean on to your Nextbook. Be patient, as this will take a few minutes. You'll hear your computer make the "device disconnected" sound, and you'll be all set. You can unplug your Nextbook from your computer now.
First boot up of the device on Jellybean was a touch slow for me, but don't panic. Once you've gotten through set up the Rom runs incredibly smooth and fast. The first screen you'll see will be the welcome (benvenuto) screen. You can select English (or your preferred language) from the drop down menu. From this point on it should be smooth sailing. Google Now works like a charm, Project Butter seems to really make a difference on this tablet, camera works, notifications work, everything seems good. There are minor bugs here and there, but nothing Earth shattering.
One last thing: for a $99 budget "craplet" from Big Lots, you could do a lot worse than this tablet. I've found it pretty sturdy, highly customizable, and generally responsive and fun to use. I also own a Nexus 7, and while this clearly can't touch it spec wise, it's definitely a fun second device to keep around.
Click to expand...
Click to collapse
can you post a different link it says file dows not exist on this server
---------- Post added at 06:01 PM ---------- Previous post was at 05:51 PM ----------
imthatkiid said:
Same for me as well... and it's really annoying me... I can't root it... so until someone finds a fix... I guess we're going to have to wait, also every time I go the whole driver thing, it says it can't find the drivers too. I don't really care to root it... but... I just wanted to try it.
Click to expand...
Click to collapse
I foiund a way around it you click start go into ur control panel and click system then to the side it should say device manger at the very top click it find where it says m3-chip left click on it chose update driver software click browse my computer click let me chose from a list of my drivers click show all devices click next click have disc then browse then chose the rk29 driver/win/64/rockusb click ok there u go
---------- Post added at 06:37 PM ---------- Previous post was at 06:01 PM ----------
I got my device to be an rk29 device but its not coming up on the screen when the device is connected please help me

[Q] Cannot connect to PC after de-bloat?

I recently went through the process of de-bloating this phone; following the helpful guides here on the AT&T G3 General forum.
However, I am finding that I cannot connect via USB to my notebook. I am going to try this on my PC @ home this pm and see if this just is not a driver issue on this end.
I restored the LG PC Suite & Suite Service to system (as well as the settings) and tried the PC suite connection app on my notebook. No dice there either...I do not even see the phone asking me how I want to connect to the laptop before I began all this de-bloat.
Is there an APK, etc. I am missing on the phone that I need to bring back to make the PC suite work again, much less connect with my notebook?
I do have developer settings / usb debugging enabled as well as (re-) installed the LG driver package. Thank you for reading / assisting in advance.

3's&7's said:
I recently went through the process of de-bloating this phone; following the helpful guides here on the AT&T G3 General forum.
However, I am finding that I cannot connect via USB to my notebook. I am going to try this on my PC @ home this pm and see if this just is not a driver issue on this end.
I restored the LG PC Suite & Suite Service to system (as well as the settings) and tried the PC suite connection app on my notebook. No dice there either...I do not even see the phone asking me how I want to connect to the laptop before I began all this de-bloat.
Is there an APK, etc. I am missing on the phone that I need to bring back to make the PC suite work again, much less connect with my notebook?
I do have developer settings / usb debugging enabled as well as (re-) installed the LG driver package. Thank you for reading / assisting in advance.
Click to expand...
Click to collapse
perhaps a list of the things you did would help us decipher what might be wrong. Everyone's idea of 'debloating' is different so I'm sure you've done something different then I have.

screwyluie said:
perhaps a list of the things you did would help us decipher what might be wrong. Everyone's idea of 'debloating' is different so I'm sure you've done something different then I have.
Click to expand...
Click to collapse
Thanks for the reply. I removed pretty much everything on the lists provided in the AT&T G3 forums and now Windows 8 refers to my device under "Printers & Devices" as a "USB Charge Only Interface". I am on my home PC now where I can verify a few days ago I could connect to the device.
To be more specific, I cannot switch the G3 into MTP mode. Does anyone know if there is a specific apk (libs, etc) to re-enable this feature?

3's&7's said:
Thanks for the reply. I removed pretty much everything on the lists provided in the AT&T G3 forums and now Windows 8 refers to my device under "Printers & Devices" as a "USB Charge Only Interface". I am on my home PC now where I can verify a few days ago I could connect to the device.
To be more specific, I cannot switch the G3 into MTP mode. Does anyone know if there is a specific apk (libs, etc) to re-enable this feature?
Click to expand...
Click to collapse
This is the reason I usually just freeze apps in titanium backup instead of uninstalling bloat altogether. I've had this kind of issue with other devices in the past so I always err on the side of caution. Like the other member said if you can list what all you removed so we can narrow down which app is causing your issue.

I removed all of this: http://forum.xda-developers.com/showthread.php?t=2822501
[GUIDE] How to remove bloatware on AT&T LG G3 - ROOT REQUIRED
...and carrier IQ as well. I restored the lg sync files (2) already and no change. Curious what apk allows the phone to be recognized as more than a charging device.

3's&7's said:
I removed all of this: http://forum.xda-developers.com/showthread.php?t=2822501
[GUIDE] How to remove bloatware on AT&T LG G3 - ROOT REQUIRED
...and carrier IQ as well. I restored the lg sync files (2) already and no change. Curious what apk allows the phone to be recognized as more than a charging device.
Click to expand...
Click to collapse
Okay here's a list of apps I've frozen but haven't deleted.
YP
ISIS
Uber
Text link + agent + engine
Play Games
Play movies
Play music
Play newsstand
Play Books
Msg backup and sync
Lookout Security
LG Setup Wizard
Keeper
Hangouts
Google +
Drive Mode
Caller Name ID
Browser
Browser Bar
Att.net home
Att remote support
Ready 2 go
Att navigator
Att mobile locate
Att family map
Att address book
Kindle
I've removed carrier IQ as well. Is there anything more than what's in the list of my frozen apps that you've removed?

Thank you for taking the time. Yes everything from the link I provided above. That is the exact list.
I'm working from the other direction...of what is the file(s) that allow a G3 to go into MTP mode.

Stupid question, but have you checked the cable to ensure its a sync cable?
Sent from my LG-D850 using XDA Free mobile app

Its a great question, ty for replying. I sure have, using the stock LG supplied USB 2.0 cable

3's&7's said:
Its a great question, ty for replying. I sure have, using the stock LG supplied USB 2.0 cable
Click to expand...
Click to collapse
This is going to be kind of obvious but have you gone into devices on your pc and removed the LG drivers? If you remove them and then plug it in it should auto detect and reinstall the drivers. If it doesn't then at least we know its not a driver issue and it is in fact something on your device. I know it'd be a huge coincidence to both the notebook and desktop to have the same problem but the drivers could have somehow been corrupted.
---------- Post added at 10:51 AM ---------- Previous post was at 10:43 AM ----------
http://www.reddit.com/r/LGG3/comments/2bk1wt/connecting_to_pc/
Have you done what silentisdeath did in his second response?

3's&7's said:
Thanks for the reply. I removed pretty much everything on the lists provided in the AT&T G3 forums and now Windows 8 refers to my device under "Printers & Devices" as a "USB Charge Only Interface". I am on my home PC now where I can verify a few days ago I could connect to the device.
To be more specific, I cannot switch the G3 into MTP mode. Does anyone know if there is a specific apk (libs, etc) to re-enable this feature?
Click to expand...
Click to collapse
USB Charge Only Interface
this rings a bell, the first time I connected my phone to the computer it did this, I had to change the setting to MTP mode. There should be a notification on the phone that says something about changing the usb mode.
Also I don't think you get this option if the drivers aren't installed properly so that's another thing you could try

screwyluie said:
USB Charge Only Interface
this rings a bell, the first time I connected my phone to the computer it did this, I had to change the setting to MTP mode. There should be a notification on the phone that says something about changing the usb mode.
Also I don't think you get this option if the drivers aren't installed properly so that's another thing you could try
Click to expand...
Click to collapse
Good job screwyluie, you rang a bell for me...its the launcher. I switched from Google Now back to stock launcher and voila...USB debugging options were available again.
/Fixed...thanks everyone for taking the time to help me! :good:

screwyluie said:
USB Charge Only Interface
this rings a bell, the first time I connected my phone to the computer it did this, I had to change the setting to MTP mode. There should be a notification on the phone that says something about changing the usb mode.
Also I don't think you get this option if the drivers aren't installed properly so that's another thing you could try
Click to expand...
Click to collapse
BreakingVZW said:
This is the reason I usually just freeze apps in titanium backup instead of uninstalling bloat altogether. I've had this kind of issue with other devices in the past so I always err on the side of caution. Like the other member said if you can list what all you removed so we can narrow down which app is causing your issue.
Click to expand...
Click to collapse
Agreed...I will probably flash back to stock, root without tripping qfuse this time, and do a lot of freezing instead of direct removal.

3's&7's said:
Good job screwyluie, you rang a bell for me...its the launcher. I switched from Google Now back to stock launcher and voila...USB debugging options were available again.
/Fixed...thanks everyone for taking the time to help me! :good:
Click to expand...
Click to collapse
good to know and glad you got it sorted

3's&7's said:
Good job screwyluie, you rang a bell for me...its the launcher. I switched from Google Now back to stock launcher and voila...USB debugging options were available again.
/Fixed...thanks everyone for taking the time to help me! :good:
Click to expand...
Click to collapse
Weird... I never would have thought google now launcher would have effected mtp recognition at all. Nice. Good lookin out to xda members once again

BreakingVZW said:
Weird... I never would have thought google now launcher would have effected mtp recognition at all. Nice. Good lookin out to xda members once again
Click to expand...
Click to collapse
For sure. Its affecting more than that too.
I tried messing with real 4k (not 2k) wallpapers in GN launcher and it really messed with the background. Half screen black and flashing the image every 10 secs...even 1080 wallpapers starting failing.
Switched back to stock launcher and sort of fixed. Reboot finally allowed me to use GN with any 2k or less wallpaper again lol.

3's&7's said:
I recently went through the process of de-bloating this phone; following the helpful guides here on the AT&T G3 General forum.
However, I am finding that I cannot connect via USB to my notebook. I am going to try this on my PC @ home this pm and see if this just is not a driver issue on this end.
I restored the LG PC Suite & Suite Service to system (as well as the settings) and tried the PC suite connection app on my notebook. No dice there either...I do not even see the phone asking me how I want to connect to the laptop before I began all this de-bloat.
Is there an APK, etc. I am missing on the phone that I need to bring back to make the PC suite work again, much less connect with my notebook?
I do have developer settings / usb debugging enabled as well as (re-) installed the LG driver package. Thank you for reading / assisting in advance.
Click to expand...
Click to collapse
I have removed every single app in my list on the thread you mentioned and there is no problems with phone connecting to pc. Most likely a driver issue - try installing LG PC suite

neverends said:
I have removed every single app in my list on the thread you mentioned and there is no problems with phone connecting to pc. Most likely a driver issue - try installing LG PC suite
Click to expand...
Click to collapse
If you scroll up, I wrote that it was purely an issue of which launcher I was using.