[Q] htc inspire 4g stuck in clockwork recovery mod and cant acess hboot - HTC Inspire 4G

hi all, i am a novice at all this stuff, and i am sorry for posting probably a similar thread to what others may have said but my problem is a little different. i am having a problem with my wifes att network htc inspire 4g. i rooted it last year with the ace hack kit. the problem is that it is stuck in ace hack kit clock work recovery. it will not start up at all unless it is attched to the computer, and thats when it will go to cw recovery. it will vibrate 3 times and blink a red led and the screen goes blank unless i press the volume down button but it doesnt stay lit up only when i hit the vol down button. then when i hit an option by hitting the power button the phone resets to cw recovery again. if i try to acess hboot, it vibrates 5 times and lights up yellow. i have tried wiping, formatting, and everything but reboot to cw recovery again. from the posts that i have read similar to this problem, everyone says to get another rom and flash from hboot. being that i cant get to hboot any other ideas.

lonewolf9387 said:
i have tried wiping, formatting, and everything
Click to expand...
Click to collapse
If you wiped and formatted, then you've probably erased whatever ROM you did have. At this point I'd probably use the ACE Hack Kit again, using the option to return everything to stock.... then use it again to re-root the phone. Then I'd install 4ext Recovery instead of CW. Then use 4ext to flash another ROM. I'd recommend Ice Cold Sandwich, found in the DHD development forum.
sent from my IceCold Inspire 4G

fatboyRICH said:
If you wiped and formatted, then you've probably erased whatever ROM you did have. At this point I'd probably use the ACE Hack Kit again, using the option to return everything to stock.... then use it again to re-root the phone. Then I'd install 4ext Recovery instead of CW. Then use 4ext to flash another ROM. I'd recommend Ice Cold Sandwich, found in the DHD development forum.
sent from my IceCold Inspire 4G
Click to expand...
Click to collapse
ok but i cannot get the computer to recgonise the phone. and with clockwork messed up and h boot not working how would i go about doing that?

lonewolf9387 said:
ok but i cannot get the computer to recgonise the phone. and with clockwork messed up and h boot not working how would i go about doing that?
Click to expand...
Click to collapse
What happened when you used AAHK? Were there any error messages? Was your phone shipped with Froyo or Gingerbread?

bananagranola said:
What happened when you used AAHK? Were there any error messages? Was your phone shipped with Froyo or Gingerbread?
Click to expand...
Click to collapse
This is my wifes phone. She said that she didn't get any error messages that she knows of. She went to use her phone one day and it was stuck in clockwork recovery. I believe the phone had froyo installed when it came factory but I updated it to the att gingerbread before I rooted it. The phone worked fine till just recently. Was there another update from att recently? Any who that's where it is stuck. No error codes just the lights like I explained above. Thx

lonewolf9387 said:
This is my wifes phone. She said that she didn't get any error messages that she knows of. She went to use her phone one day and it was stuck in clockwork recovery. I believe the phone had froyo installed when it came factory but I updated it to the att gingerbread before I rooted it. The phone worked fine till just recently. Was there another update from att recently? Any who that's where it is stuck. No error codes just the lights like I explained above. Thx
Click to expand...
Click to collapse
There was an update from AT&T recently. Did she apply that update? Is that when the problem started?

bananagranola said:
There was an update from AT&T recently. Did she apply that update? Is that when the problem started?
Click to expand...
Click to collapse
That's probably what happened. If she didnt iniate it then it probably auto updated. She's not to technical about that stuff she probably ly was hitting button's like she does. Any ideas on what to do from here. I could probably get a older romantic for it but the way it is now I can't flash it.

Best guess is to flash a ruu.
Try uninstalling the htc drivers (if you have them) and install them again to see if the computer recognizes the cell.
Sent from a dream.

Ok ill try that when I get a chance tonight and get back to you. Hey thanks for all the help guys.
Sent from my MB860 using xda app-developers app

Related

Help! Help! Help! Please!

I rooted the inspire 4g with the one click. i tried to go into recovery, and i end up with a black screen. I took out the battery and restarted and it keeps going to bootloader. I can't do anything, reset, shutdown, it keeps going to bootloader. and I can't access my sd card on my computer from my phone. How can I fix this?!?!
this belongs in the GENERAL section... not development.
and google is ur friend... look through this forum u will find ur answer
rimtp07 said:
I rooted the inspire 4g with the one click. i tried to go into recovery, and i end up with a black screen. I took out the battery and restarted and it keeps going to bootloader. I can't do anything, reset, shutdown, it keeps going to bootloader. and I can't access my sd card on my computer from my phone. How can I fix this?!?!
Click to expand...
Click to collapse
PLease post in the proper section (General) this is for rom development.
also please search!
Use an adapter to move files to the sd card. I recommend you take a look at the link in my signature.
http://forum.xda-developers.com/showthread.php?t=974789
try that.
ogxku5h said:
http://forum.xda-developers.com/showthread.php?t=974789
try that.
Click to expand...
Click to collapse
NO! there is no need to eng s-off period.
Go here:CWM black screen? Look here before you post!
MudKnot is right. I did the first option and it worked great
I had this problem too, and I found that if you take the battery out and wait maybe a minute to put it in while connected to your PC via USB, your Inspire will turn on by itself and be in Clockworkmod Recovery. The version I had at the time was 3.0.0.6, and I was able to install Android Revolution 4.0 beta v4 with no problems.
Hope this helps if you're still looking.
Sent from my Inspire 4G using XDA App
Run Bubby's program again. There is a "Fixes" option there now. Not sure if it wants you to do the ENG S-OFF thing or not. I didn't have this issue.
Matt
rimtp07 said:
I rooted the inspire 4g with the one click. i tried to go into recovery, and i end up with a black screen. I took out the battery and restarted and it keeps going to bootloader. I can't do anything, reset, shutdown, it keeps going to bootloader. and I can't access my sd card on my computer from my phone. How can I fix this?!?!
Click to expand...
Click to collapse
Well, you could use Rom Manager to do whatever it is you need to do in recovery. In other words, want to install a rom? Chose that function through Rom Manager. RM will automatically ask if you want to backup your existing rom and wipe data and cache.
-Mike

Please help my nexux s

I just unrooted my nexus s (9020t) and returned it to stock. It came up with 2.3.1 originally and wanted to update it back to 2.3.3. I found the update drivers and tried to update it, and came up with the status 7 errors. If found the solutions, and tried to go from 2.3.1 to 2.3.2, than install the radio thing to 2.3.3. Up to 2.3.2, it came up with the same error and tried the last resort of updating it to the full 2.3.3 os.
After the update, the nexus s turns on to the google splash screen and hangs up there. I can still access the recovery by holding the volume up and power. I also tried to do factory reset, and wipe data. Nothing seems to help.
Any help?
I'm no expert by any means but you may have to use odin to get it going again. You will probably need to make a jig or buy one to get into download mode.
I hope this helps you and your able to get up and running again.
Sent from my Nexus S using XDA Premium App
I'm totally new into the android community and have no idea what Odin or jig is.
Since the fastboot is working, is there something that I'm missing with resetting orders or something else? I found that some one did a wipe dalvik (I think) with factory reset and cache, but I cannot find the dalvik.
donharden2002 said:
I'm no expert by any means but you may have to use odin to get it going again. You will probably need to make a jig or buy one to get into download mode.
I hope this helps you and your able to get up and running again.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
You dont need a jig to get into download mode
Aslong as the bootloader is unlocked
Power down phone hold volume up/down then plug in USB from computer ....in download mode
Sent from my Nexus S using XDA App
im thinking if you could still access the bootloader then you can still flash clockworkmod. when you get that running, flash any rom u want in clockwork including stock 2.3.3. no odin necessary.
As long as you can still use fastboot there's no need to use Odin or JIG to flash the ROM.
I assume that:
you already have clockworkmod recovery installed and it's working properly.
your phone model is I9020T (SAMOLED)
If those are correct, I'd suggest you to download the 2.3.3 OTA package and flash it via clockworkmod (use the menu "Install zip from sdcard")
After flashing you'll have 2.3.3 on GRI40 running. And if you want to continue updating to 2.3.4, there's a thread dedicated to the topic.
PROBLEM SOLVED! Big appreciation to sonnysekhon who helped me over the phone at 11 in the night!
I was guided to just unlock fastboot, load the cwr and go into usb storage, add the cyanogen mod 7 and voila, problem solved. Now my only problem is, I've got 2.3.3 and want to update it to 2.3.4. Is there any easy way to do this?
Again, I want to thank you guys for the help!
SovereigN7 said:
PROBLEM SOLVED! Big appreciation to sonnysekhon who helped me over the phone at 11 in the night!
I was guided to just unlock fastboot, load the cwr and go into usb storage, add the cyanogen mod 7 and voila, problem solved. Now my only problem is, I've got 2.3.3 and want to update it to 2.3.4. Is there any easy way to do this?
Again, I want to thank you guys for the help!
Click to expand...
Click to collapse
Are you on cm7 or stock?
Sent from my Nexus S using XDA Premium App
I'm on cm7. It shows the cyanogen mod splash screen during bootup and has rom manager, file manager preinstalled.
I'm not really savvy when it comes to android mechanics because I just moved from itouch and iphones to androids couple days ago.
First of all. Congratulations on making the best decision! Iphone sucks. Lol.
Anyway, you can't update to 2.3.4 yet since its only available on stock right now. We're gonna have to wait until devs incorporate it into their custom roms. I believe there is a nightly version of cm7 that is already 2.3.4 but its not as stable as the 2.3.3 yet. hope that helps.
Sent from my Nexus S using XDA Premium App
yea you made the right move switching
Give it time you will get use to messing with Roms ..ect

Cause of GB reboot and possibly prevent brick

OK Guys and Gals, Here is what is going on with the radio issue. No Matter WHAT radio combos you may be using. As some of you may know by my earlier posts I live in a huge 4G network and never get anything, but 4G and (3G only for a min on boot) This is why I didn't have ANY issue's until I got curious and wanted to try something. On our tbolts, if you try to make a call while in 3G the 3G will drop out until the call is over. I went back to froyo, got pissed and went strait back to GB (doesn't matter what Rom as all the dev have clearly stated) when I did go back to GB things were tight as usual. worked like a charm. I used it as I normally would and everything was fine. upon a self induced restart, before my phone had a chance to obtain 4G (still in 3G) I decided to make a test call to see if the 3G would drop. It didn't. Quickly after I ended the call the phone booted in to bootloader. Thank God I had removed the GB RUU because I don't have a card reader to remove the RUU. I forgot to mention I do have the latest Rom Mgr and was able to get into recovery and simply reboot. After that reboot I would get to my home screen, but this time the 3G only would come up and then reboot. Time after time of rebooting I tried other things such as toggle radio to just grab 4G, then the phone rebooted again! upon the next full boot I quickly moved the original froyo radio strait to the sd card. And yet another reboot. This time I got a Rom Mgr error and noticed that Rom mgr was no longer flashed!!! I flashed it real quick because I knew another reboot was on its way. Rom mgr flashed and I told it to boot in to recovery. Thank **** I flashed Rom manager because if not I would be in continuous boots like the unfortunate others. Once in recovery I Realized that I had told my phone to go in to recovery via Rom mgr. and if I did a restore, the phone would have booted back up with my froyo rom but with the GB radio! so I told CWR to just reboot so I could tell the phone to go into recovery via the pwr restart option (thus not restarting after I flashed my froyo recovery) Once recovery of my froyo rom was complete I used ADB to reboot bootloader and SUCCESS! Bottom line you can not make a call while on 3G with any of the current GB radios, you gotta be quick, Make sure ROM mgr is actually flashed!!!! and hopefully can dump the froyo radio on to your SD card before an inevitable reboot happens! and have some ADB knowledge. I'm certain this is whats going on! People make a call while in 3G and its all down hill from there. So dont bother with telling radio settings to stick with one band. Once this happens, there is no turning back. Any questions PM me. I'm glad I tried this out before Vaca tomorrow with a FUBAR Tbolt
Hope this helps developers somehow. Good luck!
Also check a couple quotes from the development thread. Remember I'm going on vacation n won't be able to reply to many comments. Maybe just share your experience. Thank you
Sent from my ADR6400L using XDA Premium App
The people with the reboots can't get to Rom manager or recovery or anything. It reboots even if you try to gget in Clockwork.
I live in a 3g only area and make calls all the time on 3g. I have myine set to cdma auto so its always on 3g and mine hasn't done it yet. I'm on the gb radio
Sent from my ADR6400L using Tapatalk
smalltownbird said:
I live in a 3g only area and make calls all the time on 3g. I have myine set to cdma auto so its always on 3g and mine hasn't done it yet. I'm on the gb radio
Sent from my ADR6400L using Tapatalk
Click to expand...
Click to collapse
Yes this is true because your phone doesn't try to toggle to the 4g lte radio
Sent from my ADR6400L using XDA Premium App
corenojoe said:
The people with the reboots can't get to Rom manager or recovery or anything. It reboots even if you try to gget in Clockwork.
Click to expand...
Click to collapse
They can't get into rom Mgr because they didn't notice rom manager needed reflashed right before first reboot.
Sent from my ADR6400L using XDA Premium App
I live in a 4G area, was running GB Bamf rom. Made plenty of calls on 3G and on 4G lte. Never had this happen.
dopediculous said:
They can't get into rom Mgr because they didn't notice rom manager needed reflashed right before first reboot.
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
OK, first off ROM Manager and Clockwork Recovery are two different things.
ROM Manager is an app and Clockwork is your recovery.
If your phone is bricked you can't get into ROM Manager because the phone will not boot up. They can get into Clockwork for...oh I don't know, maybe 2 - 5 seconds and they the phone reboots again. Ask me how I know
A bootloop is NOT your phone bricking, if it was I would have bricked many, many phones in my time. If when you press power and volume down your phones brings up the bootloader. If you select recovery and your phone brings up your recovery screen without bootlooping you are fine.
refresh my memory, my poor old brain is on overload from all the brick posts....
Aren't the "bricked" phones also unable to stay in hboot for more than a few seconds without rebooting? If so, then what the OP is stating is NOT the same thing others reported because he states he could reflash the radio, suggesting a stable hboot/bootloader.
Seems like if you've got a stable hboot, you're not truy bricked, as the first post here shows....
bp328i said:
Ask me how I know
Click to expand...
Click to collapse
If you have a bricked device please go post in the stickied thread in app/dev.
Oh and OP - Paragraphs are a good thing. Just sayin...
bp328i said:
OK, first off ROM Manager and Clockwork Recovery are two different things.
ROM Manager is an app and Clockwork is your recovery.
If your phone is bricked you can't get into ROM Manager because the phone will not boot up. They can get into Clockwork for...oh I don't know, maybe 2 - 5 seconds and they the phone reboots again. Ask me how I know
A bootloop is NOT your phone bricking, if it was I would have bricked many, many phones in my time. If when you press power and volume down your phones brings up the bootloader. If you select recovery and your phone brings up your recovery screen without bootlooping you are fine.
Click to expand...
Click to collapse
I ment while in rom Mgr to make sure cwr is actually flashed. Mine was then after reboot I noticed cwr was no longer there. In rom Mgr it just said what the current cwr would be if I choose to flash it. If people miss this after a stupid reboot, the next reboot may not be so kind...
Sent from my ADR6400L using XDA Premium App
bp328i said:
OK, first off ROM Manager and Clockwork Recovery are two different things.
ROM Manager is an app and Clockwork is your recovery.
If your phone is bricked you can't get into ROM Manager because the phone will not boot up. They can get into Clockwork for...oh I don't know, maybe 2 - 5 seconds and they the phone reboots again. Ask me how I know
A bootloop is NOT your phone bricking, if it was I would have bricked many, many phones in my time. If when you press power and volume down your phones brings up the bootloader. If you select recovery and your phone brings up your recovery screen without bootlooping you are fine.
Click to expand...
Click to collapse
In fewer words that's exactly what I was saying. Seems like he thinks Rom Manager is recovery.
distortedloop said:
refresh my memory, my poor old brain is on overload from all the brick posts....
Aren't the "bricked" phones also unable to stay in hboot for more than a few seconds without rebooting? If so, then what the OP is stating is NOT the same thing others reported because he states he could reflash the radio, suggesting a stable hboot/bootloader.
Seems like if you've got a stable hboot, you're not truy bricked, as the first post here shows....
Click to expand...
Click to collapse
Mine was a TRUE bricked phone but my bootloader stilled would stay on. The bootloader screen was the only thing that would not bootloop. I was able to flash the stock RUU and stock bootloader and it still would not go past the splash screen.
funkybside said:
If you have a bricked device please go post in the stickied thread in app/dev.
Oh and OP - Paragraphs are a good thing. Just sayin...
Click to expand...
Click to collapse
Mine was bricked last Saturday, I don't have the phone anymore. It's been sent off for repair. Lucky me gets to rock my DInc for the next 2 - 3 weeks, DAMN 3G is slow.
dopediculous said:
I ment while in rom Mgr to make sure cwr is actually flashed. Mine was then after reboot I noticed cwr was no longer there. In rom Mgr it just said what the current cwr would be if I choose to flash it. If people miss this after a stupid reboot, the next reboot may not be so kind...
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Your phone will still reboot without a recovery. There was an issue awhile back when I had my OG Droid with ROM Manager wiping out recovery. People would try to boot into recovery to fix something and oops no recovery.
You can flash a recovery image via adb.
bp328i said:
Your phone will still reboot without a recovery. There was an issue awhile back when I had my OG Droid with ROM Manager wiping out recovery. People would try to boot into recovery to fix something and oops no recovery.
You can flash a recovery image via adb.
Click to expand...
Click to collapse
yeah, that was annoying. Believe that's when they told everyone to check the "erase recovery" option in the Rom Manager settings and that seemed to help.
PJnc284 said:
yeah, that was annoying. Believe that's when they told everyone to check the "erase recovery" option in the Rom Manager settings and that seemed to help.
Click to expand...
Click to collapse
Really funny thing was that was going on right when the Froyo leak came out for the OG Droid and the first ROM I flashed I hated. So when I went to flash my nan-droid there was no recovery and I did not know about the issue so I ended up sbf'ing back to stock and rerooting again.
I have seen a bootloop on a phone that was not running GB or rooted. A guy I work with brought me his phone a few weeks ago and wanted me to let him use my battery to boot his phone. When I put my battery in and saw what it was doing i booted it into Hboot (of course S-on) so I couldn't do much for him. Of course the Verizon Tech's weren't much help to him either, but they did send him a CLN Device. You can pass this along to jcase as I don't have enough posts to be able to post in the DEV forum yet. I read and rarely post unless I believe I have something useful to add.

[Q] HTC Sensation rebooting after root

Hi all, I am sorry if this is already posted or answered but I spent all day yesterday searching and reading and cannot find the answer.
I have 2 Htc sensations that I messed up some how and would be very grateful if you could help me with them.
Phone 1 has been rooted for a long time and in preparation for ICS I flashed T-mobil: Download 3.32 from here
http://forum.xda-developers.com/showthread.php?t=1459767
and now the phone works but it will randomly reboot. I have wiped the cache, delvak cache and battery stats.
I am completely lost please help.
Phone 2 I think I may have messed up real bad here is what I did to it.
I rotted it from here
http://forum.xda-developers.com/showthread.php?t=1192300
I got to step 2 sub step 6 and now it continuously reboots it starts with the white screen with HTC on it then goes to another white screen that says HTC Quietly brilliant for a second and repeats.
Please help me yes I am a noob and grateful for any help.
Wow that was a fun ride (not really) it appears I did not flash the PG58IMG file correctly, after I flashed it correctly I got Insert Coin installed and so far it seems that they both are working. only time will tell.
Thanks anyway guys.
A.J.
If you are trying to install the latest firmware and having the HTC log restart problem. Try to super wipe on the recovery and install first the 3.12 firmware.
HTH
Did you install supercid after root?
Sent from my HTC Sensation 4G using xda premium
Both phones are working fine but I have a new question, I can not get the voice dialer to work ie I long press the button on my plantronics bt and say call tom.
I have tried vlingo from the market and this fix
http://forum.xda-developers.com/showthread.php?t=1133246
but nothing has worked. is it just not working in Insert Coin rom?
Did I just brick my phone?
I tried to flash the 1.17 firmware and the last step failed, now it wont boot at all just a black screen the only thing it will do is the charge lite will come on bit it stays on after I unplug it.
which of the 2 phones you are talking about?
In a previous post you said that problem was solved, now what?
Also, it would be better to know what your bootloader says and what you were attempting to do before black screen.
area1509 said:
Did I just brick my phone?
I tried to flash the 1.17 firmware and the last step failed, now it wont boot at all just a black screen the only thing it will do is the charge lite will come on bit it stays on after I unplug it.
Click to expand...
Click to collapse
Sounds like a brick to me, but since the problem is unclear, it's possible to fix. I wish I could help but I don't understand your issue to be honest!
I had 3.32 on it with Insert Coin ICS and thought I have 2 so might as well restore one to factory setting that's when I tried to flash the 1.17 and it never started again.
T-Mobile HTC Sensation 4G
The other one is working so I am not messing with it.
I had the same thing happen to me and it was over for the phone. Took it in to tomo and told them it died and after I charged it and went to turn it on, bam, went black and never came back. They never got it to work either and replaced it for me
You mean 1.17 is the hboot?
In this case you installed a hboot for GB while on ICS rom. Obviously it won't work.
If you want to downgrade to GB you can try to run a GB RUU while in bootloader - fastboot usb (if you can still reach it)
kualmente said:
You mean 1.17 is the hboot?
In this case you installed a hboot for GB while on ICS rom. Obviously it won't work.
If you want to downgrade to GB you can try to run a GB RUU while in bootloader - fastboot usb (if you can still reach it)
Click to expand...
Click to collapse
He was in the process of going back to gb and that's 1 of the steps. U have to flash a gb firmware to go back to it from ics. I've done it countless times with no issues.
mugetsu666 said:
He was in the process of going back to gb and that's 1 of the steps. U have to flash a gb firmware to go back to it from ics. I've done it countless times with no issues.
Click to expand...
Click to collapse
Oh yes I have made many times too buf, if he changed firmware without changing rom obviously get stuck, and this seems happening to him.
No what's happened to him is what happened to me. It's like it gets fried or something. The screen goes black and u can't turn it on or get into bootloader. Tmobile told me when it happened it was dead and got me a new 1
kualmente said:
Oh yes I have made many times too buf, if he changed firmware without changing rom obviously get stuck, and this seems happening to him.
Click to expand...
Click to collapse
Yes you got it I will try to get it replaced. Wish me luck.
Thank you guys so much.
area1509 said:
Yes you got it I will try to get it replaced. Wish me luck.
Thank you guys so much.
Click to expand...
Click to collapse
Good luck mate. Just let us know if it worked

[Q] Stuck on CWM Recovery Everytime

Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.

Categories

Resources