Database Info

Baseband

I just recovered my phone from it bootlooping into the s/w screen but now i'm getting no data connection to my carrier. I'm guessing the only way to restore this problem is to use LG updater tool to flash the OTA 2.3.3 which also flashes a new baseband(which is what i need)
I have tried using LG tool but for some reason it keeps giving me errors saying usb connection error or can't connect to phone. I have tried 2 different cables so that can't be the problem. I'm running Windows 7 32 bit, do i need to have the phone on fully booted into android, or should i be running it on the s/w update screen?

You might have already done this but what I would recommend doing is re-installing G2x drivers and then try again.
Sent from my LG-P999 using XDA App

Yea, but it never hurts to try again from scratch. Thanks for the input.
Sent from my LG-P999 using XDA Premium App

When you get the connection error try unplugging the USB cable, wait for the computer to beep to confirm the USB device driver has been unloaded, plug the cable back in and wait for the computer to beep to verify that the device driver is running again and then click the restart button on the LG Update. This happened to me once and this is how I fixed it. I ignored the message about pulling the battery. If that doesn't work then you need to search for the thread on the KDZ method and update your phone that way. KDZ method flashes the same ROM as the LG Updater.

Ya, i've tried just about everything including the kdz method. I even ran it on my friends xp computer but got the same results i did when i was on windows 7. LG tool and kdz just friggin hates my phone and computers i guess because i have followed all the threads and peoples advice and still can never get past the errors those programs keep giving me.

Please don't take this as a patronizing question, but did you install the LG USB driver package for T-Mobile phones? If you didn't then none of the above mentioned tools will be able to connect to your phone. Did you also turn off anti-virus, firewall, all background programs, etc. before trying to connect? If you did that and you still cannot connect go into control panel with your phone connected, find the LG Modem driver for the phone and disable it. The modem connecting first can prevent the phone from connecting in a mode it can be flashed. Then disconnect the USB cable and plug it back in. When the drivers load about ten devices should be installed. The first time my phone was plugged into my computer only two devices installed. I then reinstalled the drivers from the LG Updater program directly (not the ones downloaded from the LG TMO G2X driver page) and then the next time I plugged in my phone about eight new devices were S/W update mode more drivers get installed. This delay sometimes causes a communications error the first time, but unplugging the cable and reinserting it will sometimes fix the problem at that point.

I welcome your feedback
Yea I installed that driver where it loads 8-10 additional drivers for g2x. So I think I will try disabling the modem driver and restart the LG update tool. At this point I've tried just about everything but am willing to try any other suggestions, like yours, and thank you for the help.
Sent from my LG-P999 using XDA Premium App

[Q] Help with camera?

EDIT: I finally got fastboot to see it. I uninstalled moto usb drivers, and installed a different version. I am back on 3.0.1 now. My camera still doesn't work though. The app starts, but the back camera just shows a black screen. The front one works.
Any ideas?
I am having serious issues with fastboot. I was running Tiamat Rom 2.2.1 Moray. My camera didn't work with it though. I flashed the stock 3.2.2 ROM. The camera still doesn't work, and wifi won't connect now.
I figured I would start over, and flash the original images for 3.0
I have the sdk installed, and the motorola drivers. ADB sees my xoom, but fastboot doesn't. It just says waiting for device when I try to send it commands. My xoom is in fastboot mode when I send them.
I have tried to use the PDANet drivers as suggested by others while searching google for answers, and that didn't do anything.
When the xoom is in fastboot and connected to my PC, the device manager doesn't list anything for it. What other drivers do I need?
Any help would be appreciated.

Did the back camera work when the Xoom was in out-of-the-box-state? That means before you laid your hands on it and flashed a custom ROM?
I'm inclined to think it's a hardware defect since the front camera works and thus the app seems to work...

That is what I am leaning towards now also. It did work when I first got it. I am not 100% sure when it stopped, as I only used it a few times right after I purchased it.

List of problems im having that i cant fix

Im looking for help on fixing my SGS4G.
Here is the current list of problems:
1. Phone isnt recognized when i plug it into any computer (i download all the drivers, Kies and Odin both cant find it, and 1 out of every 10 tries my computer will recognize the microsd card and treat it like a normal sd card)
2. My Dialer and Messages will open for 3-4 seconds and close without a force close screen or anything. Obviously this is really annoying :|
3. Im rooted but trying to go back to stock to redo this whole process over is becoming a pain.
4. When trying to flash a custom rom from ROM manager i get the signature verification failed message.
Im about to try the heimdall one-click package to get back to stock and see if that works...idk if it will find my phone though.
My system info:
Firmware: 2.3.6
Baseband: T959VUVKJ6
Kernal: 2.6.35.7-T959VUVKJ6-CL694130
Build: GINGERBREAD.VUVKJ6
If i manage to get back to stock/unrooted where do you guys suggest i go from there? im kind of out of the loop as far as where we are with ICS or jellybean or any of that :|
Thanks a bunch in advance and sorry if this is nooby

Also:
adb devices shows nothing :\
USBDview shows nothing for my phone...i plug it in with debugging on and all it does is charge my phone

First problem. Do not use ROM manager. Download ROM zips and flash through CWM/TWRP.
Have you tried using a different cable when connecting to PC? Some cheaper cables do not work well, or at all. I have a blackberry cable that I only use for this.
Have you tried alternate USB ports. Sometimes that may be this issue as well. Also, some people have better luck with Odin, while others have better luck with heimdall. You may want to try the alternate and see if you have the same issue.
I would follow the guides on going back to stock. You may have old conflicting drivers so you may need to completely remove old ones first.
Sent from my SGH-T959V using xda app-developers app

I use the cable that came with it and the one that comes with my girlfriends phone which is a different phone with no problems. You might want to mess with the usb configuration on your computer
Sent from my SGH-T959V

As far as the dialer and messenger app backing out automatically that was an issue with all bml gingerbread roms. I think there was a fix but I'm not sure. Cm7 is mtd based gingerbread and it doesn't have that problem.
Sent from my SGH-T959V using xda app-developers app

Jiggly,
Ive tried every USB port on my desktop and my laptop. Both of them im reinstalled the drivers on. On my desktop the moment I plug it in it says the device malfunctioned.
Usbdview didn't show anything like the guides said it should. (HTC something...there was.nothing)
ROM manager is just on my phone ive never actually used it other than to boot to recovery
Sent from my SGH-T959V using xda app-developers app

The phone goes into download mode but heimdall still doesnt detect it, windows still tells me the device cant be recognized and im out of ideas.
i went into regedit and deleted all the samsung folders and reinstalled the drivers fresh but im still not getting anywhere...

flash the blastoff kernel, or some custom GB kernel.
Let it convert to ext4, it'll take 10 minutes,
flash a rom through CWM which you will now have.

Im missing something here...but i cant flash anything as everything is unsigned and i cant get out of 3e recovery. ODIN, heimdall etc still wont find my phone from my computer(s) and everything i attempt to flash is unsigned.

Can you boot into your ROM?

boot into my rom as in use my phone? yes the phone functions fine with the exception of not being able to plug it into my computer to tether it/use mass storage and these darn auto close problems with my dialer/messages

Well i was able to flash a new kernel with CWM then upgraded to cm9.
didnt realize contact sync didnt work so i lost all that info :\ computer still says the device malfunctioned but my messaging and dialer apps dont auto close now lol

[Q] NOTE 2 Rooted on CM & no Signal no USB to Win8 PC

:crying: PLEASE help meh.. I just bought a Note 2 SPH-L900 it was
Rooted,
Updated to 4.4 Android version,
with CyanogenMod version 11-20131109-UNOFFICIAL-l900,
Kernal version 3.0.64-CM-g7fc3ce7,
And it gets no signal no data no phone info ect..
no mdn min mobile network type, mobile network state is disconnected, but has a signal strength 2147483647 dBm 255 as
And wont connect to my Win8 computer via usb cable gives error "Usb Device Not Recognized"
I installed Sumsungs drivers, and KEIS im guessing the phone is the issue (tried diff usb port, diff cable, rebooted everything, took all batteries out ect...)
Only progress I've had installing GoLauncher EX WinZip and few others from a old Reware backup file on sd card.
Luckly the wifi works but has no Google Aps and wont install from browser so I download apps and install from File Manager.
But no Google apps and none worx after I install them.
Would flashing a new 4.4 rom like PACMAN help? Im still learning but got a lot of basics down.
New Kernals? if so which one?
WHAT!? So sorry so many problems.. wish factory reset just fixd every thing but didn't YIKES! my email is [email protected] or call me after email. Mahalo from Hawaii :fingers-crossed:

Can I flash or reinstall stock firmware w no usb cable??
maybe download it straight to phone or something???

1pinpaladin said:
:crying: PLEASE help meh.. I just bought a Note 2 SPH-L900 it was
Rooted,
Updated to 4.4 Android version,
with CyanogenMod version 11-20131109-UNOFFICIAL-l900,
Kernal version 3.0.64-CM-g7fc3ce7,
And it gets no signal no data no phone info ect..
no mdn min mobile network type, mobile network state is disconnected, but has a signal strength 2147483647 dBm 255 as
And wont connect to my Win8 computer via usb cable gives error "Usb Device Not Recognized"
I installed Sumsungs drivers, and KEIS im guessing the phone is the issue (tried diff usb port, diff cable, rebooted everything, took all batteries out ect...)
Only progress I've had installing GoLauncher EX WinZip and few others from a old Reware backup file on sd card.
Luckly the wifi works but has no Google Aps and wont install from browser so I download apps and install from File Manager.
But no Google apps and none worx after I install them.
Would flashing a new 4.4 rom like PACMAN help? Im still learning but got a lot of basics down.
New Kernals? if so which one?
WHAT!? So sorry so many problems.. wish factory reset just fixd every thing but didn't YIKES! my email is [email protected] or call me after email. Mahalo from Hawaii :fingers-crossed:
Click to expand...
Click to collapse
I am unsure whether this would help or not, but have you tried flashing the MJ9 BEANS update for the modem first? It may solve it (It was require for me to go to a 4.3 rom on my Verizon Note 2 SCH-i605)

No connection to PC after USB tether

First time I encountered this problem was when using reverse tether app from xda thread here. First everything was good and run fine but after some time the tether didn't work and also my phone didn't connect to computer anymore. It often said no driver found although I reinstalled it and rebooted phone and PC and whatsoever.
Flashing a new rom didn't help until I flashed aicp rom 4.4.4 But only for some time then connection was gone again.
After installing windows 7 on computer everything worked fine again.
Now after using the clockwork tether app I face the same problem again. Everything worked well and now I can't connect again and I get the same message about drivers...
Hope anyone has an idea what's wrong there
Sent from my GT-I9100 using XDA Free mobile app