[Q] How to root stock JellyBean Nexus S 4g? - Nexus S Q&A, Help & Troubleshooting

I've been stock for a while again, and feel like going back to having more control. I'm on stock Sprints Nexus S 4g's 4.1 JB...how would I go about rooting this?

Windst said:
I've been stock for a while again, and feel like going back to having more control. I'm on stock Sprints Nexus S 4g's 4.1 JB...how would I go about rooting this?
Click to expand...
Click to collapse
I used "http://forum.xda-developers.com/showthread.php?t=1250583&highlight=one-click-nexus-7+2" by ShabbyPenguin. Works good . . .

Windst said:
I've been stock for a while again, and feel like going back to having more control. I'm on stock Sprints Nexus S 4g's 4.1 JB...how would I go about rooting this?
Click to expand...
Click to collapse
yep shabby's 7.2 tool is the way to go

Thank You both

Download supersu.zip onto phones internal storage.
Fastboot flash or boot custom recovery.
Flash supersu.zip from recovery
Stock rooted.
Easiest way. Best way. Never fails way. The same way the phone was rooted in the first place.....

can't get Shabby's way to work. just searches for devices & on my phone it stays at the bootloader screen. how can I flash something if i'm unable to use ROM manager?
courtesy of my Jelly Bean'd Nexus S 4G using Tapatalk 2.1

Thread Cleaned. Lets stop the arguing.

Deleted my comments
Vs Nexus S4G using tapatalk2

Follow the instructions below to install CWM on your phone and then you can flash super user binaries to get root access.
If you have lost recovery then install pdanet on your computer.(It will also install Nexus S USB Drivers) then put your phone into fastboot mode by holding down both Volume Up and Power buttons together. When you are in fastboot mode connect your phone to your PC using USB cable.Download ADB and recovery you want to flash put it in your C:/recovery (Put adb and recovery image in this folder)
Then open cmd and type
1)CD C:/recovery
2)fastboot flash recovery recoveryname.img (replace recoveryname with actual file name of the recovery image).
You can download recovery from here
Or you can avoid all this and just use this
http://forum.xda-developers.com/showthread.php?t=1544940&highlight=recovery

how to root nexus s ? from jb ? more infos ?

To root ANY nexus the process is the same. All that differs is the files used.
1. Unlock bootloader
2. Get the proper su zip on the devices storage. Either boot up and put it there or do it by mounting storage in step 3
3. Boot or flash custom recovery and flash your su.zip.
That's it. If you're already unlocked skip step one. Make sure you got the su.zip on your phone. Use fastboot to flash or boot recovery and boot into it. Flash the zip.

ive tried everything in this post, but i cant unlock or root. Im assuming the drivers are my problem because in Device Manager I can only install ACER ADB or Android Adb Interface.
In shabby's one-click, I get to the step where it says something like "select the unlock option on my phone", but in fastboot i only get 4 options and neither say "unlock"

peopleface said:
ive tried everything in this post, but i cant unlock or root. Im assuming the drivers are my problem because in Device Manager I can only install ACER ADB or Android Adb Interface.
In shabby's one-click, I get to the step where it says something like "select the unlock option on my phone", but in fastboot i only get 4 options and neither say "unlock"
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1623481
Its old but still works. Go into fast boot and type in cmd fastboot oem unlock, its not an option in fadtboot. Don't use one clicks, learn the original way. You will be much better off in the future.
This might help also
http://forum.xda-developers.com/showthread.php?t=1901617
Sent from my Nexus S using xda premium

Related

[Q] Nexus s stuk on boot screen

I have rooted android devices such as the htc hero and desire so I have a bit of background. However I tried rooting the nexus s and actually didn't even root the phone. After unlocking the nexus bootloader the instructions I followed said to reboot the phone which I did. However when I rebooted the phone it stays on the Google screen with a lock at the bottom of the screen The only upside is that my phone isn't totally bricked because I can access the bootloader by pressing up and power. Someone please help I will donate if you can get my phone up and running. By the way i'm using the tmobile 3g nexus s.
You need to download a recovery image, and, superuser zip file. Put them on the root of your usb storage You, shouldn't, have rebooted the phone after unlocking the bootloader. The phone doesn't have a custom recovery yet, that's why you are seeing the triangle. Put the phone in fastboot open a terminal and type in fastboot devices you should see a line of numbers then fastboot. Then type fastboot flash recovery recovery.img (with the name being the ACTUAL NAME of the recovery image you downloaded) then it should say something like writing recovery and then you can put the phone in recovery mode. As soon as the screen turns off unplug it. When it boots into recovery select flash zip from SD Card (yes we don't, have an SD Card it doesn't matter) then locate the superuser zip and select install. Reboot the phone.
Sent from my NS running NSCollab cuz I lost my tin cans and string....
When you say type fastboot flash recovery recovery.img with the name being the ACTUAL NAME of the recovery image do you mean that i replace the word recovery with the name of the file or just replace recovery.img with the name of the file?
also i can't transfer it to usb storage because it doesn't show up on my pc
You need to turn on USB storage first. Also the name of the recovery image should be something like recovery-clockwork-3.0.0.5-crespo.img (that would be the latest recovery from clockworkmod for our device, (crespo) Nexus S. So you would type fastboot flash recovery recovery-clockwork-3.0.0.5-crespo.img
Also once you move the su zip and recovery img to the USB Storage turn off the phone AFTER SAFELY REMOVING HARDWARE AND TURNING OFF USB STORAGE boot into the bootloader and do the above steps typing fastboot devices first to make sure you are connected All Gamer has a really good guide in either Nexus S general or Q&A
Sent from a bird cage, with a swing!
vintagetonez; I am almost having the same issue. I unlocked the bootloader and flashed recoverymod but was unable to locate the superuser zip file so I rebooted my nexus. When I tried to start over again and fastboot I'm getting an error with CMD saying its waiting for device. On the nexus when in fastboot mode at the very bottom it says fastboot failsomething or another.
Any suggestions as to how I can get fast boot working again?!
Sent from my Nexus S 4G using XDA Premium app
I should also say that I have tried booting in recovery since and clockwork mod is not there anymore. Its the stock android recovery. Is this a driver issue? I can't imagine so since I was able to unlock the bootloader
Sent from my Nexus S 4G using XDA Premium App
Is it possible to mount the sd card in fastboot or recovery mode if it is what's the command.
vintagetonez said:
I should also say that I have tried booting in recovery since and clockwork mod is not there anymore. Its the stock android recovery. Is this a driver issue? I can't imagine so since I was able to unlock the bootloader
Sent from my Nexus S 4G using XDA Premium App
Click to expand...
Click to collapse
With the Nexus S, you MUST REFLASH recovery every time you need it. There is a way to rename the stock recovery so clockwork mod will stick. However, I prefer to reflash it as I never have to worry about bricking my device. If you want to use the renaming method Google it using XDA Developers as a search parameter.
Sent from a bird cage, with a swing!
I figured out what the problem is but I need the system.img file do you no where i can find it in android 2.3.4 i've manually download it to my desktop but can't find the file

[Q] Can't access root and Google apps

I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
SounderBruce said:
I recently rooted my phone (T-Mobile US Nexus S) and installed the 4.0.3 OTA update from this thread, but now I cannot access any Google apps or get root access on any of the apps that require it.
Click to expand...
Click to collapse
Ok! first download : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
just unpack, connect your device and click run.bat.....Good luck!
I ran the .bat, but I get an error saying "Device already rooted", but it is still not recognized as rooted by SuperUser.
Alternatively, is it possible to completely wipe the phone of everything (including root) so I can start over with a fresh phone?
Of course you can, and might be the best idea if you don't mind doing it.
Make sure you have the latest CWM recovery on your phone, download the FULL ROM from this thread (i'm not american so i don't know exactly, but from what i know yours is the I9020T, so get that ROM) and copy it to the SDCard. Now go into recovery, wipe system/data and dalvik cache, then flash the ROM.
Do make sure you have the right ROM though. This will get you 100% fresh and untouched 4.0.3. You can probably clear out any non-personal folders on the sdcard too, but that shouldn't do any harm anyway.
After this, use the attached file from this thread to root, and feel free to update root/superuser.
Actually, that's what I did...I can't use CWM recovery because its displaying an error of no root. So how do I wipe this or fix CWM?
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Harbb said:
Is your boot loader unlocked? And are you trying to flash cwm through fastboot?
Note to backup your sdcard if unlocking the bootloader.
Click to expand...
Click to collapse
My bootloader is apparently unlocked and I'm trying to flash through fastboot.
Are you sure the following is satisfied:
-open padlock and google logo on boot
-fastboot (on phone) says "bootloader status: unlocked" or something of the like
-you are using: "fastboot flash recovery "C:\path\to\recovery.img""
-you are using the above command while connected to the PC via USB (with working drivers) and that you are in fastboot mode on the phone (turn off phone --> hold Vol. Up then hold Power TOGETHER for about 2 seconds, should give you reboot and recovery options)
It is necessary to be in the bootloader/fastboot interface on the phone when you run the command. Hopefully it was something simple that i said above, otherwise i'm completely lost.
1. Yes
2. Yes
3. I didn't use that method to root...
4. I'll try that.
3 is just flashing recovery, that is the code u type into cmd/terminal to reflash the recovery img. It isn't rooting the phone. 4 is how to get into the mode on the phone to use the command.
Its a bit confusing at first but makes much more sense once you do it one or two times.
Where do I go to get the recovery image?
The latest ClockWorkMod Recovery can be found on this page. Just scroll down to Nexus S and download 5.0.2.0 crespo .img. Then just direct fastboot to the folder you have it saved in while using the "fastboot flash recovery C:\path\to\recovery.img" command.
Ok. I've tried this, but in command prompt, I get the following error:
C:\Users\Bruce>fastboot flash recovery C:\Users\Bruce\Downloads\recovery.img
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
Check out this rooting guide, however only go up to step 5 (and do NOT type "fastboot oem unlock", do everything up until that point). This will setup fastboot for you, and setup drivers for your computer. Once this is done, do what you did above and it should work successfully.
Remember to cd (change directory) in cmd to where you unzipped that folder.
There isn't a link...
Sorry, stuffed that up. I fixed the link in my previous post pointing to NexusSHacks - How to Root Nexus S.
It's worked, but when I try to go to the recovery menu, the Google/unlocked padlock screen freezes or it displays an Android with its chest compartment open and a red triangular ! symbol.
I just had a really long reply and managed to lose it by closing the page..
That's the stock bootloader you see there, it probably didnt flash or you rebooted your phone. And make sure that you are flashing the latest CWM you downloaded before.
I flashed the latest CWM, but when I try to go to recovery, my phone freezes at the Google logo with the unlocked padlock.
Have you tried flashing it again, or maybe redownloading the file? And of course making sure it is the NEXUS S version which you are downloading.
Alternatively, try just "fastboot boot recovery.img", replacing recovery.img with the full name and path of cwm.
edit: btw, i'll be gone for an hour or two Bruce so i can answer any more questions/issues when i get back

How to flash a custom recovery on a rooted Xoom?

Hello everyone!
I've used ROM manager to flash clockwork mod recovery and it worked great until I realised that this clockwork doesn't see my SD card! I just wanted to know is there a solution to this without going back to stock etc?
Sent from my Xoom using XDA Premium HD app
Never fear! Fastboot is here!
Fastboot flash recovery recovery.img from the command line of your computer (you must have motorola drivers installed plus adb/fastboot tools)
I recommend Rogue Recovery, it's over in the android development section. Others prefer TWRP and EOS recovery. Take your pick. All support the internal SD card.
Thanks for your reply!
I thought about it initially, wanted to repeat steps used to flash it when original recovery was on. But first command re-booted xoom and took me to clockwork (no s..t, Sherlock? ) and then I thought I better stop before I end up with a brick.
So just to be clear, connect my xoom, go to the right folder on my pc and type:
fastboot flash recovery file-name.img
is that correct? do I need to be in recovery?
xywojtek said:
Thanks for your reply!
I thought about it initially, wanted to repeat steps used to flash it when original recovery was on. But first command re-booted xoom and took me to clockwork (no s..t, Sherlock? ) and then I thought I better stop before I end up with a brick.
So just to be clear, connect my xoom, go to the right folder on my pc and type:
fastboot flash recovery file-name.img
is that correct? do I need to be in recovery?
Click to expand...
Click to collapse
So you need to be in bootloader mode, not recovery. You can either turn the xoom on then press the down button about 2 seconds after you see the splash screen or use 'adb reboot bootloader'. I think it says 'starting fastboot protocol', can't quite remember from memory. then as you said, go to the right folder type fastboot flash recovery file-name.img
then fastboot reboot
then you'll be able to get into your custom recovery
love you man!

[Q] Stuck in "FASTBOOT MODE - NO BOOT OR RECOVERY IMG"

My NExus S is stuck on the screen that says:
Fastboot Mode No Boot or Recovery IMg.
Product Name - Herring
HW Version - Rev34
Bootloader Version - D720SPRKC5
Baseband Version - D720SPRLCI
Carrier Inro - SPR
Serial Number 32300E25C33500EC
Lock State - Locked
options to select
Reboot Bootloader (gives me exact same screen) except it only says "Fastboot"
Reboot Back to the "FASTBOOT MODE - NO BOOT OR RECOVERY IMG"
Recovery (Can boot to CWM but I can't mount anything)
Power OFF (That works fine)
Then the little green man and the android logo
Followed by USB Control INIT
USB Control INIT End
STANDARD_SET_CONFIGURATION
Conventional wisdom says download some files and fix via fastboot. However in fastbootI can't run ANY of the steps without running FASTBOOT OEM UNLOCK. When I run it my phone asks if I really want to unlock the bootloader. when I choose YEs and hit power it just freezes there.
My next thought Boot to recovery and restore. A restore through recovery followed by a reboot leads me back to the original no boot or recovery img.
Okay I'll just sideload a working rom by mounting usb storage. Then I can flash it with CWM and be up and running.
but when I try to do mount the USB Storage I get "E:Unable to write to ums 1unfile (No such file or directory)"
Finally, Last ditch Effort, I'll load up ODIN and use that to put on a working recovery. there's forums all over the place explaining how to do that right? Well yes, but the links to the Tar file are all broken.
What next my friends? I'd really like to get this phone working.
Wug's Nexus Root Toolkit.
ej8989 said:
Wug's Nexus Root Toolkit.
Click to expand...
Click to collapse
I tried doing the Flash stock + unroot in wug's kit but no luc. any other ideas?
swing4thefence said:
I tried doing the Flash stock + unroot in wug's kit but no luc. any other ideas?
Click to expand...
Click to collapse
Your bootloader is LOCKED. You must first UNLOCK the bootloader by clicking "Unlock" on Nexus Root Toolkit.
ej8989 said:
Your bootloader is LOCKED. You must first UNLOCK the bootloader by clicking "Unlock" on Nexus Root Toolkit.
Click to expand...
Click to collapse
No matter how I try to do it, it always freezes at the unlock bootloader step.
Did you install proper drivers?
ej8989 said:
Did you install proper drivers?
Click to expand...
Click to collapse
I thought so. My wife is on the computer so if she ever gives it back I'll re-install the drivers and try again.
swing4thefence said:
I thought so. My wife is on the computer so if she ever gives it back I'll re-install the drivers and try again.
Click to expand...
Click to collapse
Reinstalled Drivers. Still no luck.
I have the same problem.
Same situation for me, because i pressed "Reboot" in CWM without having flashed a Rom (stupid ). Broken power button, hanging on Google logo or in Fastboot mode.
I hope RTK will help me :good: :laugh:
Edit: I have no idea how to revive my Nexus S. Status: Broken Power button, Bootloop, can access Fastbood Mode but dont select someting, Bootloader unlocked, RTK doesn´t find any devices in Fastboot Mode, Device is rooted and has CWM
!Lür said:
Same situation for me, because i pressed "Reboot" in CWM without having flashed a Rom (stupid ). Broken power button, hanging on Google logo or in Fastboot mode.
I hope RTK will help me :good: :laugh:
Edit: I have no idea how to revive my Nexus S. Status: Broken Power button, Bootloop, can access Fastbood Mode but dont select someting, Bootloader unlocked, RTK doesn´t find any devices in Fastboot Mode, Device is rooted and has CWM
Click to expand...
Click to collapse
what about just using adb? Can you find it when you type fastboot devices? If so there's a command in fastboot to reboot to recovery I think.
I on the other hand am screwed. I read in another forum that it hangs on unlock because the internal memory is fubar.
swing4thefence said:
what about just using adb? Can you find it when you type fastboot devices? If so there's a command in fastboot to reboot to recovery I think.
I on the other hand am screwed. I read in another forum that it hangs on unlock because the internal memory is fubar.
Click to expand...
Click to collapse
Solution for me:
1. Turn device on into Bootloop
2. Connect it via USB (PC founds it)
3. type in CMD "adb reboot recovery"
4. device is in recovery
5. reflash everything i wanted :good:
Requirement is a working Android-SDK!
I wish it was that easy for me. I can access recovery just fine. It's the memory I can't touch. Unless someone knows a way to fix corrupted memory...
Sent from my SCH-I510 using xda app-developers app
Im having this same issue too i can still get to CWM recovery but nothing really helps from there. I can still mount my storage and put zip files on there etc but nothing seems to fix the problem...any progress?
swing4thefence said:
I wish it was that easy for me. I can access recovery just fine. It's the memory I can't touch. Unless someone knows a way to fix corrupted memory...
Sent from my SCH-I510 using xda app-developers app
Click to expand...
Click to collapse
I think I'm going to try using my computer to mount and format the internal memory. any ideas as to the correct settings to use when I try this? at this point what have I got to lose?
swing4thefence said:
I think I'm going to try using my computer to mount and format the internal memory. any ideas as to the correct settings to use when I try this? at this point what have I got to lose?
Click to expand...
Click to collapse
Was this solved by any means ??, i am myself stuck at that position
Flash the stock image again using the Nexus Toolkit
Sent from my Nexus S using xda app-developers app
Akbar89 said:
Flash the stock image again using the Nexus Toolkit
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Wug's Nexus toolkit ?? It is stuck on bootloader unlock menu, as unlocking bootloader makes it freeze. Without unlock it doesn't flashI anything.
If there is another tool please guide me with link.
Avoid Spells!!! "Auto correct : ON"
stuck on fastboot mode(lenovo S860)
recently i've bought lenovo s860 (2GB version).....its latest updates had bugs....so i was trying to downgrade to lower version(jelly bean).....in the way i got stuck in fastboot mode......is there any way to get out of it??
same problem in galaxy nexus i9250m
ej8989 said:
Did you install proper drivers?
Click to expand...
Click to collapse
i have same problem in galaxy nexus i9250m
my bootloader showingh no boot or recovery img
i have working fastboot, workin adb and driver
my oem is unlocked with fastboot
bt i am unable to flash recovery and rom

Rooting new nexus 5 with 6.01

Android 6.0.1, build number MOB30H
I have a brand new nexus 5 that I want to root. Using ota, I accepted the system updates to 6.0.1 with the Android security patch of May 1, 2016. (not sure if that was a good idea or not but it's done now....). Now I want to root it with a twrp recovery.
Like most run of the mill users I've only rooted a device 2-3 times in my life, so my memory is rusty on how exactly to do it. I searched this forum and found many threads about this or that rooting problem which just confused me further. I know I need to unlock the bootloader and then flash a twrp recovery but I am not sure of the exact sequence of steps.
1. When I connect the nexus 5 to my windows pc using adb, it appears in Windows but the nexus 5 folder is empty. I have developer options available and usb debugging is on but I can't find where the mtp switch is.
2. Adb.
I have adb installed in Windows. The command "adb devices" returns the nexus 5 number unauthorized.
Don't know what "unauthorized" means or what to do about it.
I've done nothing further because I don't want to mess things up. Please help me resolve questions 1 and 2. Then, I presume I need to
A. unlock the bootloader
Fastboot command?
B. What's next?
Thanks for any help.
Two things, have you enabled developer options. Go to settings, about phone and tap build number 7 times. In developer options you can change USB configuration and you'll also need to enable OEM unlock. Then unlock and root your device per the guide in the general section.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Two things, have you enabled developer options. Go to settings, about phone and tap build number 7 times. In developer options you can change USB configuration and you'll also need to enable OEM unlock. Then unlock and root your device per the guide in the general section.
Click to expand...
Click to collapse
Just to add,not to confuse him even more, there is no Oem unlock option for Nexus 5
Sent from my Alps Q10101 using XDA Labs
You need to connect the phone in fastboot mode, run the command "fastboot oem unlock:, accept the agreement using the volume and power buttons, reboot into fastboot mode, flash twrp, copy the latest version of supersu.zip to the phone's internal memory, and flash supersu.zip from twrp.
You can install TWRP and root without using ADB commands.
Yes I already had developer options working and also usb debug on.
Discovered that mtp is a problem in marshmallow. I finally got file transfer working.
audit13 said:
You need to connect the phone in fastboot mode, run the command "fastboot oem unlock:, accept the agreement using the volume and power buttons, reboot into fastboot mode, flash twrp, copy the latest version of supersu.zip to the phone's internal memory, and flash supersu.zip from twrp.
You can install TWRP and root without using ADB commands.
Click to expand...
Click to collapse
Thank you very much. That is very helpful.
I didn't know you could "install TWRP and root without using ADB commands". How do you do that?
BTW, I updated the new nexus 5 to marshmallow inadvertently. When I root I'll probably use a 5.1.1 image. Good idea?
Stevica Smederevac said:
Just to add,not to confuse him even more, there is no Oem unlock option for Nexus 5
Sent from my Alps Q10101 using XDA Labs
Click to expand...
Click to collapse
Yep, my bad. Sorry about that. My 5 crapped out and have the 5x now. Amazing how fast you forget things, lol.
Sent from my Nexus 9 using XDA Free mobile app
Download and flash twrp in fastboot mode: https://dl.twrp.me/hammerhead/twrp-3.0.2-0-hammerhead.img.html
Download supersu.zip and save it to the phone's internal memory: https://download.chainfire.eu/921/SuperSU/UPDATE-SuperSU-v2.65-20151226141550.zip
Boot the phone into fasboot mode, open a command prompt, type fastboot devices and press enter. If the device is recognized, you'll see the device's serial number. Unlock the bootloader by typing "fastboot oem unlock" and use the volume/power button to accept the agreement and unlock the bootloader. Unlocking the bootloader will wipe the phone's data and cache.
To install TWRP, boot the phone into fastboot mode, connect it to the computer, open a command prompt, and type "fastboot flash recovery name-of-TWRP-file,img" and press enter. After flashing, immediately boot into recovery using the power and volume buttons, and then flash supersu.zip.
Thank you so much audit13. I really appreciate your help.
One question if I may. Reading on the web about rooting the nexus 5 running marshmallow I came across a couple of sites that said I should download and flash "ElementalX kernel and SuperSU 2.52" in addition to supersu.
I've never had to install a separate kernel when I rooted in the past. I notice you don't add flashing a kernel either. Can I ignore flashing a special kernel?
Thank you so very much for your clear instructions.
Some root methods require a rootable kernel. The latest supersu should root mm.
Thank you. Ran into a problem. That's why people like me are afraid of rooting.
Bootloader is now unlocked. Thanks.
With the N5 in fastboot mode, I connected it again with the laptop.
From the laptop command prompt I ussued "fastboot devices" and it found the phone.
Problem:
1. Fastboot flash recovery.img
(I had renamed the twrp 3.0.2 img file to recovery. Img)
Result:
unknown partition 'recovery.img'
error: cannot determine image filename for' recovery.img'
Tried by downloading a fresh copy and using its original filename.
Same result.
What am I doing wrong?
Thank you.
Found my error. I forgot the word recovery.
I now flashed twrp successfully!
When I went to flash supersu I discovered that the supersu I had downloaded was no longer in download folder. Guess it got wiped. So I rebooted into system and will download it again. Hope that does not mess up things.
Edit:
All went well. Re-downloaded SuperSU, installed fine and I'm home free.
Thank you all, especially audit13. This is a nerve-wracking process for people who only do it rarely. Glad it is over. The rest is easy!
I spoke too soon. I believe I now have a boot loop? What I have is that the horizontal turning balls of marshmallow go around forever and never finish booting.
How do I exit from this?
So close, but not there!
Edit
I rebooted into twrp, deleted cache, davlik. Still in bootloop.
Deleted data. Still in bootloop.
Help.
Reflash the entire stock rom and start over.
Try the latest beta of supersu: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Great you are still here.
Need more details.
You say reflash stock rom. Where do I get it? How do I get it into the phone? Do I flash it through twrp?
How to flash factory image: http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
Factory images are here: https://developers.google.com/android/nexus/ota#hammerhead
Thank you again. Will do.
I think I know what went wrong. After I flashed twrp the phone rebooted into system before I could stop it and I think I interrupted it somewhere to return to twrp to flash Supersu. Anyway, glad I didn't brick it. Thanks again for being there.
It's morning now and after a good night's sleep I'm less rattled. Will get breakfast and start again.
I'm going out with my wife for breakfast.
I haven't followed the marshmallow threads but I recall reading about lingering problems with marshmallow. I also like to use xprivacy and gravitybox. So I'm thinking of flashing the latest 5.1.1 instead of 6. Any thoughts?
I like both ROMs but my battery life seems a bit better on MM. I'm sticking with unrooted stock ROMs on all of my phones for now.
Being a "flashaholic" is tiring!
audit13, I know you know this but it was so simple to do (once you know how.....!). It took me the whole of 20 minutes, if that, to download the files, flash 5.1.1, flash twrp and install SuperSU. Makes you wonder why I had so much trouble before!
Well when you don't know the command syntax (forget to write which partition to flash to) and are frozen with fear that you will brick the phone, it is a scary process. Once I knew how, I breezed through it. Problem is that by the next time I need to do this, I will have forgotten how or will worry that the process has changed.
I just want to thank you more than I can say for helping and hanging in while I made my mistakes. I wish there was a way I could thank you with more than words. You were great!
P.S. This time I used the beta SuperSU. Don't know if it made any difference.

Categories

Resources