I tried to install a ROM for the first time, I followed the instruction and wiped everything then I installed the Rom zip file but now the phone is not working at all, It says there is no OS installed.
Please I need help
What Rom are you trying to install?
Sent from HTC One S
Jkatorza said:
I tried to install a ROM for the first time, I followed the instruction and wiped everything then I installed the Rom zip file but now the phone is not working at all, It says there is no OS installed.
Please I need help
Click to expand...
Click to collapse
And had that too sometimes. Have you made a nandroid backup first? If not, you have to install the Rom again or run the RUU
Gesendet von meinem HTC One S mit Tapatalk 2
Related
Hello there!I have an LG P920 Optimus 3D and im having a problem...I was downloading some games from a market and my device starts to download a lot of appz that i didnt choose so i try to remove the battery and then my device is like dead...When i try to open the device starts and when it goes to the LG boot screen stuck there...Any suggestions what can i do to restore or to flash another rom?:/
Thanks in advance John!
Recovery If you have installed, you can do whatever you want, the best is certainly a restore, or install a rom, but if you can not.
You just have, download LG update, install the drivers and Update Software and clip emergency and recovery mode.
And reinstall the original software.
also had that problem. the emergency recovery did it for me, you wont lose any data.
I have the same problem.I yesterday installed cm7 which also stuck on cm screen.THen I restored v21a but is gets stuck on lg screen...
Plz someone help,Lg software update doesn't work
(can enter cwm)
Try wipe all and reinstall firmware.
adixtra said:
Try wipe all and reinstall firmware.
Click to expand...
Click to collapse
tried but nothing...
johnko1 said:
I have the same problem.I yesterday installed cm7 which also stuck on cm screen.THen I restored v21a but is gets stuck on lg screen...
Plz someone help,Lg software update doesn't work
(can enter cwm)
Click to expand...
Click to collapse
Seems like an cm7 Bug.had The Same Problem .try to flash the cm7 sk4 and then flash The nightly again.
Gesendet von meinem LG-P920 mit Tapatalk
Gerrett said:
Seems like an cm7 Bug.had The Same Problem .try to flash the cm7 sk4 and then flash The nightly again.
Gesendet von meinem LG-P920 mit Tapatalk
Click to expand...
Click to collapse
Well I flashed the king rom and then back to the original...will wait until cm9 comes,I'm ok with v21a for now...
Ok So I decided to backup my rom in rom manager as I havn't done it in a few months and figured it would be a good idea. So the phone rebooted and was stuck at LG logo. It didnt back up files or do anything so after 15 mins pulled battery and now all I get is the LG screen. I was running Cyanogen mod 7 and had a current backup as well. I cant get the phone into clockwork mod recovery so I dont know what to do. Any help is appreciated, thanks! I dont really care if I lose my stuff or not I can do it over I just need my phone
Enter in emergency mod, flash stock rom([kdz]froyo-v10 or gb-v20), root, install recovery, flash/restore backup.We have one thread explaining those stuffs somewere...
Sent from my LG-P500 using xda premium
Sorry search didnt really seem to work for me.....
how do i know which p509 driver to download?
none of these drivers will install with this LG tool it stops at extracting files
started at step 8 here:
http://forum.xda-developers.com/showthread.php?t=1060121
on my way back from stock now
chevanater said:
started at step 8 here:
http://forum.xda-developers.com/showthread.php?t=1060121
on my way back from stock now
Click to expand...
Click to collapse
Did it worked
If you can enter recovery, just flash a rom again
Sent from my LG-P500
vlt96 said:
If you can enter recovery, just flash a rom again
Sent from my LG-P500
Click to expand...
Click to collapse
He said, he can not boot recovery, but why do you don't flash another recovery using LGMDP?
Gesendet von meinem LG-P500 mit Tapatalk 2
Hi all, this is my first post to this forum, so forgive me if I make any mistakes
I installed the latest Chainfire SuperSU (v 2.46), and flashed it with TWRP. The flashing was successful, but when I opened up SuperSU there was a popup that said "The SU binary needs to be updated. Continue?".
This is where the problem comes in. There are 2 options to update the binary, normal and TWRP/CWM. At first I tried TWRP, and to my understanding, the phone is supposed to automatically boot into recovery and install the binary update, but nothing happens. The popup just closes and that's it. SuperSU didn't even close. After rebooting, I tried the "normal" option, and after a while, it says "Installation failed! Please reboot and tried again." No mater how many times I reboot, the problem persists.
I have already tried reflashing the SuperSU zip and rebooted many times, but nothing seems to work. I'm at my wits end. Any help is greatly appreciated.
Anyone?
I've also tried reflashing TWRP, in case the problem was with the recovery. No luck there either. I'm also unable to use the "Full unroot" or any other related uninstallation/reinstallation of SuperSU. After the "Uninstalling..." message, nothing happens, and when i reboot my phone, SuperSU is still there.
You need system write protection remove ...do it when you go s-off or flash custom kernel
Gesendet von meinem HTC One_E8 mit Tapatalk
snoopyhaeckers said:
You need system write protection remove ...do it when you go s-off or flash custom kernel
Gesendet von meinem HTC One_E8 mit Tapatalk
Click to expand...
Click to collapse
How do I go s-off? It seems the only way is to purchase a Sunshine license for $25?
whyw8 said:
How do I go s-off? It seems the only way is to purchase a Sunshine license for $25?
Click to expand...
Click to collapse
It's at the moment the only way with sunshine
Gesendet von meinem HTC One_E8 mit Tapatalk
snoopyhaeckers said:
It's at the moment the only way with sunshine
Gesendet von meinem HTC One_E8 mit Tapatalk
Click to expand...
Click to collapse
Thank you for your reply, but damn, I really don't want to drop $25 for a license... Are there no other alternatives to fix my problem?
You can flash the same recovery stock firmware stock boot zip per fastboot
Gesendet von meinem HTC One_E8 mit Tapatalk
snoopyhaeckers said:
You can flash the same recovery stock firmware stock boot zip per fastboot
Gesendet von meinem HTC One_E8 mit Tapatalk
Click to expand...
Click to collapse
Yes, I was looking at that, I can get the stock firmware, which is the RUU (?) from here right? http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210
But does this work on S-On?
@nkk71
Currently following your instructions for decrypting the RUU, but may I know where I can obtain the hboot img file?
whyw8 said:
@nkk71
Currently following your instructions for decrypting the RUU, but may I know where I can obtain the hboot img file?
Click to expand...
Click to collapse
we (@Captain_Throwback and myself) are currently working on a Universal HTC Decrypt Tool, until we get that done, you only have three choices
1- decrypt it yourself, i think i've left more than enough information in @joeykrim's thread
2- wait till we finish the tool
3- if you're really desperate, give me links (the phone forum, and the ruu in question), and i'll take a look (sorry but I don't feel like going through forums & threads, about a device I havent even heard of)
Are there any updates on the Universal HTC Decrypt Tool?
hi every body..
how can i go back to android 5 by erase the phone memory via TWRP recovery ???
what is steps ??
anybody can help me??
thanks....
ebrahim1603 said:
hi every body..
how can i go back to android 5 by erase the phone memory via TWRP recovery ???
what is steps ??
anybody can help me??
thanks....
Click to expand...
Click to collapse
you can wipe system dalvic cache and restore a twrp backup ....when you will a clean install use a ruu
Gesendet von meinem HTC One_E8 mit Tapatalk
snoopyhaeckers said:
you can wipe system dalvic cache and restore a twrp backup ....when you will a clean install use a ruu
Gesendet von meinem HTC One_E8 mit Tapatalk
Click to expand...
Click to collapse
thanks for your replay.
so i must first install twrp recovery
then download suitable twrp backup from this link (http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210) and put into internal storage
then do wipe dalvic cache and system and finally install twrp backup ????????
is this steps ????
thank you again...
ebrahim1603 said:
thanks for your replay.
so i must first install twrp recovery
then download suitable twrp backup from this link (http://forum.xda-developers.com/one-e8/help/htc-one-e8-mid-cid-ruu-ota-twrp-t2903210) and put into internal storage
then do wipe dalvic cache and system and finally install twrp backup ????????
is this steps ????
thank you again...
Click to expand...
Click to collapse
You must create if twrp folder a backup folder and so on also twrp/backup/yourserial/ put the backup here
Gesendet von meinem HTC One_E8 mit Tapatalk
Hey guys what's the best way to flash the new update? I tried flashfire but it won't unencrypt the OTA.
Sent from my Mi A1 using Tapatalk
robgee789 said:
Hey guys what's the best way to flash the new update? I tried flashfire but it won't unencrypt the OTA.
Sent from my Mi A1 using Tapatalk
Click to expand...
Click to collapse
Flashfire does not seem to work right without SuperSu, at least I had the same experience as you. I flashed back the stock recovery and let the normal updater do it's jobs.
It doesn't seem to care that a custom Kernel and magisk is installed, worked perfectly.
Gesendet von meinem SHIELD Tablet K1 mit Tapatalk
D-m-x said:
Flashfire does not seem to work right without SuperSu, at least I had the same experience as you. I flashed back the stock recovery and let the normal updater do it's jobs.
It doesn't seem to care that a custom Kernel and magisk is installed, worked perfectly.
Gesendet von meinem SHIELD Tablet K1 mit Tapatalk
Click to expand...
Click to collapse
How do I flash the stock recovery mate?
Sent from my SHIELD Tablet K1 using Tapatalk
I find it easy to flash the full update through TWRP.
Sent from my SHIELD Tablet using XDA Free mobile app
I flashed successfully using TWRP as well, and everything is working fine.
Just downloaded the version posted here: https://forum.xda-developers.com/showpost.php?p=74693612&postcount=6
Then booted to TWRP, flashed the file, then flashed Magisk (or SuperSU if you prefer) to root. Root before rebooting after the update, otherwise TWRP may be replaced with stock recovery.
I did backup using Titanium, before updating. Your data should remain intact. But it's good to backup beforehand, just in case.
You do not need to download images from the site. Simply allow your tablet to download the update. Once downloaded, it is located in /system/data/data/com. nvidia. ota/app_download - move it to /system/sdcard/Download, run the tablet in recovery and flash the downloaded zip file.