Database Info

[Q] nexus s 4g wont connect too pc?? help!!!

just got a replacement cause last one wouldnt connect i just dont knw what to do ive dont the debugging an stay awake neither so please help

Are you sure you have the drivers installed? Does phone realize its plugged into a usb and the pc doesn't realize its plugged into a phone?
Sent from my Nexus S 4G using XDA App

umm my phone doesnt reconginze it.....where do i go to get them?

So you get nothing coming up in your status bar saying anything about usb anything?
Easiest way for drivers is pdanet, just google it.
Sent from my Nexus S 4G using XDA App

no nothing just start charging....ok well thanks ill check it out

Try other ports and a different cable.
Sent from my Nexus S 4G using XDA App

ive tried both of them an just ran pdanet an it still didnt find it idk

regis419 said:
ive tried both of them an just ran pdanet an it still didnt find it idk
Click to expand...
Click to collapse
Try using ports on the back of your pc, also try a different pc.

Galaxy Tab 2 hard brick

Hi guys,
i have Galaxy Tab 2 hard bricked. Can't turn it, nothing happens when trying to turn on or charge. Absolutely dead. It is dead after i've tried to enable swap on rooted device.
Please help me

Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium

Please be more brief.
What did you do?
What did you try?
When plugged in to a computer, does it recognize it?
Does ODIN recognize it?
And if all fails and you are ready to go hardmode:
https://www.youtube.com/watch?v=Ami4TQH3cmc

jyeshta001 said:
Wat was ur last ROM stock or else?
Did u tried it to connect in download mode to PC?
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'

suka_narkot said:
It was stock ROM. I've installed only cwm-root-gtab2a and GT-P5100_ClockworkMod-Recover - this files. And all was fine.
I can't turn it to download mode.
When i tried to connect to PC i hear sound like device attached and from 3-5sec I hear 'device unattached' sound. This device is 'TI board'
Click to expand...
Click to collapse
Hay bro..... will u tell me wants ur model....?
I wanna help u coz I know wats da pain of bricking a android.....
Sent from my GT-P3100 using xda premium

My Galaxy Tab 2 is P5100. It is rooted and works fine until i've tried to tweak swap via Swapper 2.
After i've installed this app i've tried to tweak my device and reboot it. so my tab is turned off and i can't enable it.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.

Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium

jyeshta001 said:
Now u connect it to Odin ....did the Odin software recogniz or tab
If yess u can reflash the all things....
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
It can't be turned on in recovery/download mode so it is not visible in ODIN.

suka_narkot said:
My Galaxy Tab 2 is P5100.
I've installed drivers and saw 'omap 4430' device in Windows. It appears when i connect my tab via usb cable at hold power button.
Click to expand...
Click to collapse
????
Sent from my GT-P3100 using xda premium

what happens when you put it on charge ? probably battery is zero

Hello, I had same symptoms with my p5100 and I can't repair it. look here http://forum.xda-developers.com/showthread.php?t=1908949

jyeshta001 said:
????
Sent from my GT-P3100 using xda premium
Click to expand...
Click to collapse
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:

rraaka said:
what happens when you put it on charge ? probably battery is zero
Click to expand...
Click to collapse
No, battery was full-charged.
And i've plugged to charger and hold it with connected charger for 5 hours tonight - nothing, it is dead

riff box is the only way
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm

morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I don't see that it supports the ti omap4430.
Sent from my GT-P3113 using xda app-developers app

morteza.ghodsi said:
http://www.fonefunshop.co.uk/Unlocking/riff_box.htm
Click to expand...
Click to collapse
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((

merka_zh said:
I've visited one month ago much service centers (which used riff, medusa box, etc... ) - nobody can repair my bricked p5100 (((
Click to expand...
Click to collapse
Did u have any idea if you are going to repair it by Samsung how much it will cost....?

suka_narkot said:
Tab should be turned on in download mode for flash via ODIN. But I can't enable it in download mode.
What happens when i connect Table to PC - I can see 'OMAP 4430 USB device' in Windows device manager. But this device is not visible and not accessible with ODIN. Nothing happens with my tablet - display is blanc, no backlight, ... :crying:
Click to expand...
Click to collapse
Unfortunately I'm sorry to say but when to get that omap message the tablet or phone IS in fact hard bricked and is not recoverable by anything here at xda. Samsung may be able to fix it but you are probably Better off just getting a new tab man because it'll cost just as much.
I know it's hard to hear that and it really sucks.
I almost bricked this tablet too and just had to give up on it for a while because it was so frustrating. I finally found the fix.
A couple months ago these guys were posting the wrong recoveries and root files and not labeling them correctly. So you have to be real careful with this stuff because s alot of them don't know what's going on.
Sent from my SGH-T889 using Tapatalk 2

adishakthi said:
Did u have any idea if you are going to repair it by Samsung how much it will cost....?
Click to expand...
Click to collapse
1. authorised Samsung center proposed me to change board for 350$
2. i have contacts with unofficial master and he proposed me to replace internal memory card - from broken Tablet for 150$
But I've been looking for another solution and when came to service for replace internal flash memory (2 weeks ago) - they didn't have it.
So I've put it on the shelf and bought another Tablet - it is not Samsung, it is repairable device )))

Plz delete.....

Micro Usb port won't charge.

Greetings all. Newbee here. I have a rooted Gs3 running CM10 4.2.2. My problem is that the Micro Usb on the phone doesn't recognize the charger or computer.
Can this be a driver problem? If not, how can i take it back to stock without the use of a computer? Right now I'm using an external charger for charging. Oh, I have insurance. Any thoughts? Thanks in advance.
Sent from my SPH-L710 using xda app-developers app

dashonebravo175 said:
Greetings all. Newbee here. I have a rooted Gs3 running CM10 4.2.2. My problem is that the Micro Usb on the phone doesn't recognize the charger or computer.
Can this be a driver problem? If not, how can i take it back to stock without the use of a computer? Right now I'm using an external charger for charging. Oh, I have insurance. Any thoughts? Thanks in advance.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Welcome to XDA,if your on windows,go here... http://www.samsung.com/us/support/downloads and select phones,then your model.Try that,first,its more than likely the situation,if you havent installed any drivers yet,or try reinstalling it,always get drivers from the manufacturers site,so you can get the latest versions.Make sure to restart your computer after installing drivers.

Thanks for the welcome. My only problem is I can't use the USB cord from the computer. I've tried several chords and no dice. Tried rubbing alcohol and a toothbrush deal too... Nothing. Can I download it to my phone from the Samsung site itself? Will I lose root if i do this? You guys rule. Thanks again.
Sent from my SPH-L710 using xda app-developers app

Might be from flashing the ROM or Incorrect USB Controller Drivers
dashonebravo175 said:
Greetings all. Newbee here. I have a rooted Gs3 running CM10 4.2.2. My problem is that the Micro Usb on the phone doesn't recognize the charger or computer.
Can this be a driver problem? If not, how can i take it back to stock without the use of a computer? Right now I'm using an external charger for charging. Oh, I have insurance. Any thoughts? Thanks in advance.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
I don't have any experience with CM10 but It sounds like this might be related to either a bad ROM flash or you may need to install updated drivers for the USB Controller on your Motherboard. If the USB ports you're trying to connect the phone to worked fine before the flash then I would suggest posting on the CM10 section of this forum to receive help with flashing back to stock. You can also go to the manufactures website for the Motherboard you have installed and download drivers from there. If you get it back to stock and the problem is not fixed you could try going through the phone insurance. Hope this helps you out

I'm really thinking it is the USB port itself. This is something that started to diminish over time. It was fine one day. A few days later, only would charge if I pulled or push the wire to one side. Now, it's totally out of commission. Can I put a new one usb port on? Doesn't seem to hard. I realllly don't want to go back to stock, nor do I think i can w/o a chord.
Sent from my SPH-L710 using xda app-developers app

You can try downloading the Rom again then flash it.followed by wipe data/reset
Ignore my signature...Just press thanks

dashonebravo175 said:
I'm really thinking it is the USB port itself. This is something that started to diminish over time. It was fine one day. A few days later, only would charge if I pulled or push the wire to one side. Now, it's totally out of commission. Can I put a new one usb port on? Doesn't seem to hard. I realllly don't want to go back to stock, nor do I think i can w/o a chord.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
Yes, you could add a USB 2.0 or USB 3.0 PCI Express Card adapter to your computer. If you want the ports in the front of your computer, you could get front panel ports and run the connector to the midboard connector on your motherboard.

Try Your Luck to Get back your Tipo/Miro/E

hi all,
In most of Q/A thread of tipo/miro , i have seen that people are facing trouble after unlocking bootloader and get therir device bricked. so here, after some research ,i have mentioned notes that they should have try to get their tipo if possible.may be it will help
-Notes
-Change USB Port & USB Cable and Make Sure driver is installed Correctly
-Sometimes it looks like hardbrciked but it is not,so check that is there any vibration/LED sign while trying to turn on device
-Remove sd-card and SIM ,put your device in charging for 24 hours ,there is a little hope to get RED LED after
-Try External Charger and Charge your battery for long time & Connect your device without battery by holding volume down button and insert battery. It may detect your device on flashtool
-If you get LED Then try to connect with flash/fastboot mode and flash stock rom or use PC companian/SUS after Relocking Bootloader.
IF ANYONE WATCHING THIS THREAD HAVING SOLVED THAT KIND OF ISSUE THEN PLZ SHARE YOUR EXPERIANCE TO HELP OTHERS.

that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app

tit_xperiamiro said:
that's when people get software problem. but with drivers or devices problem like dead boot, we need Sony
Sent from my ST23i using XDA Premium 4 mobile app
Click to expand...
Click to collapse
softbrick can easily get recover by flashtool
In Most Case of hardbrick Sony will charge for Motherboard
Sent from my ST21i using xda app-developers app

Problem-Xperia E Green LED & Vibration while turning On But not turning On
->For Solution Check Post By UltraGamerHD in this Thread http://forum.xda-developers.com/showthread.php?t=2577490
Sent from my ST21i using Tapatalk

usb access issue on pc

can anyone please help me. suddenly my galaxy core cannot be usb connected to pc. it just happen. when i plug the cable on the phone it says its connected at MTP device but on the pc i think it shows as a modem and recognize as gt-i8262 but when i click it it says "you dont have permission to access this device" i ve spent 3 days scouring the web looking for a solution but nothing..im lost.. im on windows 8 and phone is on Monster$ B3. please someone tell me if there's a solution. attached pic of the error ..

I don't know if this would help, try uninstalling the drivers for galaxy core, then hook up the phone.
Your issue sounds like it's your pc's problem, you should also try hooking your phone up in someone else's pc, just to be sure it ain't your phone's fault.
Sent from my GT-I8262 using xda app-developers app

try installing kies to install correct drivers fr ur phone....
Sent from my GT-I8262 using XDA Premium 4 mobile app

did try
dje20 said:
I don't know if this would help, try uninstalling the drivers for galaxy core, then hook up the phone.
Your issue sounds like it's your pc's problem, you should also try hooking your phone up in someone else's pc, just to be sure it ain't your phone's fault.
Sent from my GT-I8262 using xda app-developers app
Click to expand...
Click to collapse
hi
i did try connecting stock Samsung phns of colleagues and even other android phns and all get connected well and mtp works.. my SG core and my Tab 2 10.1 on Sensonic hd both are giving this error. also i tried everything with the drivers and still the same..im so baffled by this issue...

tried
Akshay7273 said:
try installing kies to install correct drivers fr ur phone....
Sent from my GT-I8262 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
tried both..even different versions of kies and driver..still nothing...
can this be someting to do with CWM?

last option is to go back to stock rom and retry......

pheonixxdark said:
can anyone please help me. suddenly my galaxy core cannot be usb connected to pc. it just happen. when i plug the cable on the phone it says its connected at MTP device but on the pc i think it shows as a modem and recognize as gt-i8262 but when i click it it says "you dont have permission to access this device" i ve spent 3 days scouring the web looking for a solution but nothing..im lost.. im on windows 8 and phone is on Monster$ B3. please someone tell me if there's a solution. attached pic of the error ..
Click to expand...
Click to collapse
do you have on usb tethering then turn of it or go developer option in setting menu and unchek usb debugging if stll cant do factory reset your phone n try it again.
Best of luck.
if i helped you give a big thanks:thumbup:
Sent from my GT-I8262 using XDA Premium 4 mobile app

Maybe it's because your phone is password protected, try opening your password and go to home menu before returning to connect USB cable