i have already tried the noob guide. it didnt work for me. my phone is stuck on the M dual core screen and wont go any farther.
i have a clockwork mod recovery of my original rom (2.3.6) but cant seem to get it to install.
does anyone have another way to get my phone back to stock or anything else
thanks for the help
Need firmware info mate. Then I can help you. AT&T? 2.3.5? 2.3.6?
Sent from my SAMSUNG-SGH-I727 using xda premium
Agreed, Fall. The more info the better. What did you do to cause the phone to soft brick? I hope that if you were messing around with the ICS leak, you handled everything as if it were dynamite. You say you have CWM, I assume you also had/have the Atrix Bootstrap apk as well. (?) Did you install anything else, such as BootMenu? Be as exact about what happened, what you did, what all you had installed, and the above mentioned by Fall of Enosis. The more you can provide, the better he (we) can troubleshoot...
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
sorry i thought the 2.3.6 was enough it is an att phone
Apex_Strider said:
Agreed, Fall. The more info the better. What did you do to cause the phone to soft brick? I hope that if you were messing around with the ICS leak, you handled everything as if it were dynamite. You say you have CWM, I assume you also had/have the Atrix Bootstrap apk as well. (?) Did you install anything else, such as BootMenu? Be as exact about what happened, what you did, what all you had installed, and the above mentioned by Fall of Enosis. The more you can provide, the better he (we) can troubleshoot...
Sent from my SAMSUNG-SGH-I747 Anti-Motorola Ballistic Missile
Click to expand...
Click to collapse
i rooted and installed blaze beta 2? i cant realy remember using cmw then installed bootstrap apk to help wiht the cwm. after that everthing went down hill when trying to reinstall my back up because i could not send or receive pic text.
forgot to mention the i have access to android recovery
again 2.3.6 w/ att
[email protected] said:
i rooted and installed blaze beta 2? i cant realy remember using cmw then installed bootstrap apk to help wiht the cwm. after that everthing went down hill when trying to reinstall my back up because i could not send or receive pic text.
forgot to mention the i have access to android recovery
again 2.3.6 w/ att
Click to expand...
Click to collapse
Can you boot into AP Fastboot by pressing and holding AT THE SAME TIME the volume up + down + power buttons?
Sent from my SAMSUNG-SGH-I747 using Xparent SkyBlue Tapatalk 2
Apex_Strider said:
Can you boot into AP Fastboot by pressing and holding AT THE SAME TIME the volume up + down + power buttons?
Sent from my SAMSUNG-SGH-I747 using Xparent SkyBlue Tapatalk 2
Click to expand...
Click to collapse
Yes
[email protected] said:
Yes
Click to expand...
Click to collapse
Then you can fxz back to stock 2.3.5 as given in noob guide..
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Then you can fxz back to stock 2.3.5 as given in noob guide..
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
as i stated at the top of the post it didnt work for me i tried a couple of times no to mention the links to 2..3.5 did not work anymore i was able to find them on another site.
[email protected] said:
as i stated at the top of the post it didnt work for me i tried a couple of times no to mention the links to 2..3.5 did not work anymore i was able to find them on another site.
Click to expand...
Click to collapse
So what failed when you tried to fxz?
mtnlion said:
So what failed when you tried to fxz?
Click to expand...
Click to collapse
i need to recharge the battery will try later tonight and post the results.
thanks for the support
mtnlion said:
So what failed when you tried to fxz?
Click to expand...
Click to collapse
i really apperciate the help that i am getting
tried fast boot again w/rsd lite and this is what i got
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Are you sure you are using correct file? I have not fxz'ed my A2 yet but file size 2xxx seems really small. Fastboot/sbf flash files are pretty big and even bigger for A2 because gingerbread has full webtop.
Sent from my Abacus using Android
Ask jim or alteredlikeness before you do this!!!
Seriously ask first!
If I understand correctly jims script and or alreredlikness's mod to said script leaves the mbm intact. You might be able to use their stuff for ics fxz back even though your only still on gb and never been on ics. The script way is simple IF they tell you it would work. Ask them personally first though. Good luck.
Sent from my MB865 using Tapatalk 2
el_venga said:
Are you sure you are using correct file? I have not fxz'ed my A2 yet but file size 2xxx seems really small. Fastboot/sbf flash files are pretty big and even bigger for A2 because gingerbread has full webtop.
Sent from my Abacus using Android
Click to expand...
Click to collapse
i have tried 2 different links for inlineflashing zip files both give the same results and both are 477mb
[email protected] said:
i have tried 2 different links for inlineflashing zip files both give the same results and both are 477mb
Click to expand...
Click to collapse
WHERE are you downloading the FXZ's from? This might be your whole problem.
Fall of Enosis said:
WHERE are you downloading the FXZ's from? This might be your whole problem.
Click to expand...
Click to collapse
where ever i can find it 1 has been from the xda site and others have been from some android sites
Fall of Enosis said:
WHERE are you downloading the FXZ's from? This might be your whole problem.
Click to expand...
Click to collapse
the size of the fxz is 477mb he is right in that part..from screenshot its not clear at what step rsdlite fails..in non at n t phones it almost always fails at step 3
[email protected] said:
where ever i can find it 1 has been from the xda site and others have been from some android sites
Click to expand...
Click to collapse
did you check md5 after download??
devilhunter47 said:
the size of the fxz is 477mb he is right in that part..from screenshot its not clear at what step rsdlite fails..in non at n t phones it almost always fails at step 3
did you check md5 after download??
Click to expand...
Click to collapse
that one is new to me how do you do that
Download the FXZ from here: Original thread for FB files
Check the MD5: See PRichardson's thread about using hashtab HERE.
Try to reflash and let us know how it goes.
EDIT: Since you are on 2.3.6 MAKE SURE TO PATCH THE FXZ AS LAID OUT IN THE NOOB GUIDE!!!!!!!
Related
I was searching online for an extended power menu mod and I thought I had found one. I downloaded it and flashed it through CWM. But now, whenever I hold my power button in order to bring up the power menu, it soft reboots immediately with no prompts. If someone could help me, that would be greatly appreciated as I know the greatness of the xda community. Thanks in advance.
Riding on a Jellybean within the Nexus territory...
Try Reflashing the ROM
But remember to always create a backup.
do what u been advised by post above mine.
btw did u flash the right Mods for ur rom?
I will try reflashing the ROM. And the mod wasn't ROM specific. It said it would work on any JB ROM.
Sent from my Full Android on Crespo using xda app-developers app
So I reflashed the ROM and my power menu is now working properly. Thank you. But before I flashed the ROM and now, still, I'm having a problem with my xda app uninstalling itself multiple times.
Also, I have a file that I downloaded from my ROMs forum called jb-framework.zip. There was no explanation given as to what the file does. Could someone explain it to me please?
And finally, if someone would be kind enough to create me a mod for an extended power menu I would be grateful. Or give me information on how to do so myself. Thanks.
Sent from my Full Android on Crespo using xda app-developers app
dont forget to hit THANKS button, if someone helped u...
Try this extended power menu mod for jb, after rebooting to recovery & making a backup. THIS IS NOT MINE, ALL CREDIT GOES TO Paul627g
http://forum.xda-developers.com/showthread.php?t=1771200
Sent from my Nexus S 4G using xda premium
p1gp3n said:
Try this extended power menu mod for jb, after rebooting to recovery & making a backup. THIS IS NOT MINE, ALL CREDIT GOES TO Paul627g
http://forum.xda-developers.com/showthread.php?t=1771200
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I will definitely try this right now and will get back to you on whether it works for me or not.
Make sure u make a backup, just in case. Here is a current shot of it working on my ns4g...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus S 4G using xda premium
p1gp3n said:
Make sure u make a backup, just in case. Here is a current shot of it working on my ns4g...
View attachment 1204776
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
I do believe that I have tried this mod before, but when flashing, it gave me an error. I'm currently backing up my phone, and as soon as it finishes I will flash this. I'm not sure if my phone is the NS4G or if it's just an NS. Model number is i9020a or something like that. Can't check at the moment. Lol.
p1gp3n said:
Make sure u make a backup, just in case. Here is a current shot of it working on my ns4g...
View attachment 1204776
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
CWM gave me this:
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.produ
ct.device") == "crespo4g" ||
getprop("ro.build.product") =
= "crespo4g"
E:Error in /sdcard/ExtendedPower
Menu-JellyBean_v7.zip
(Status 7)
Installation aborted.
What I understand from that is that I have the wrong model and build number, correct? Meaning this is solely for the NS4G which I don't have. Lol.
r u new to android?
if yes try 2 read the most basic stuff regarding rooting, flashing etc, otherwise u might end up with expensive dead black box...
greg2826 said:
r u new to android?
if yes try 2 read the most basic stuff regarding rooting, flashing etc, otherwise u might end up with expensive dead black box...
Click to expand...
Click to collapse
I'm not necessarily new, per say. I've rooted an Atrix 4G, rooted/flashed custom roms on an HTC Inspire 4G, rooted/flashed many custom roms/modems/kernels on a Samsung Captivate, rooted/flashed ICS/kernel on a Samsung Galaxy Note, rooted/flashed multiple ICS roms/kernel/modems on a Samsung Infuse 4G, and as of right now, rooted/flashed two or three JB roms/two or three kernels/and one or two modems on my Nexus, and rooted/flashed firmware to a Sony Ericsson Xperia Play.
which rom r u running; Gnex port, Sdk by Steven- Daxmax, rom by Oodie or aosp by Legolas?
greg2826 said:
which rom r u running; Gnex port, Sdk by Steven- Daxmax, rom by Oodie or aosp by Legolas?
Click to expand...
Click to collapse
The AOSP by Legolas.
DefinitiveX said:
The AOSP by Legolas.
Click to expand...
Click to collapse
so the best option 4u would be, to go over there{legolas thread} and do little bit of research.
lots of ppl over there right now with same rom like urs and maybe with some solution.
http://forum.xda-developers.com/showthread.php?t=1764646&page=15 recovery,reboot mods for our NS
http://forum.xda-developers.com/showthread.php?t=1764646&page=8 percentage battery for our NS
they have been flashed to Gnex port with no problems
I thought the link I posted worked for ns & the 4g... sorry!
Sent from my Nexus S 4G using xda premium
p1gp3n said:
I thought the link I posted worked for ns & the 4g... sorry!
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
such a shame there is no SORRY button to hit at...
haha just trolling, nothing personal;-]
greg2826 said:
so the best option 4u would be, to go over there{legolas thread} and do little bit of research.
lots of ppl over there right now with same rom like urs and maybe with some solution.
http://forum.xda-developers.com/showthread.php?t=1764646&page=15 recovery,reboot mods for our NS
http://forum.xda-developers.com/showthread.php?t=1764646&page=8 percentage battery for our NS
they have been flashed to Gnex port with no problems
Click to expand...
Click to collapse
Ok. I will do that. Thank you. My mind isnt working very well today.
p1gp3n said:
I thought the link I posted worked for ns & the 4g... sorry!
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
No problem. I thought the same thing as well. Thank you for assisting though.
Sent from my Full Android on Crespo using xda app-developers app
The mod works well. Thank you Greg. This thread could very well be closed now.
Sent from my Full Android on Crespo using xda app-developers app
Hi All,
I have Motorola Atrix 2, and i wanted to flash it with a custom ROM, for which i downloaded CM7-ICS-Beta and CWM-recovery-atrix4.1 both.
When i go into the recovery mode by pressing and holding VOL UP + VOL DOWN and powering it ON on same time. then this menu option comes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I had no idea what to choose, but when i choose recovery, the fone shows this option and stucks at that....
and when i select AP FASTBOOT option this menu comes and get stuck...
Please help me in getting into CW Mode...!!
(Sorry for the blur image)
Man why don't you search the forum first? There's a lot of info about that. And BTW the bootloader it's still LOCK!!!
Sent from my MB865 using xda premium
jfrank1485 said:
Man why don't you search the forum first? There's a lot of info about that. And BTW the bootloader it's still LOCK!!!
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
@ jfrank1485: hey thanks...for a quick response...
I have already searching the forum from last two days....
in all posts they say there's an option called "RSD mode"..but i am getting only these options...i have tried "fastboot oem unlock" also..but no help...
chandu911 said:
@ jfrank1485: hey thanks...for a quick response...
I have already searching the forum from last two days....
in all posts they say there's an option called "RSD mode"..but i am getting only these options...i have tried "fastboot oem unlock" also..but no help...
Click to expand...
Click to collapse
Our bootloader is highly encrypted and will not be unlocked (unless it's from Moto). RSD is a program by Moto to flash roms (and signed kernels) using fastboot
AND PLEASE READ THIS http://forum.xda-developers.com/showthread.php?t=1778853
Don't post in the dev section unless you made something.... such as a rom or mod
farshad525hou said:
Our bootloader is highly encrypted and will not be unlocked (unless it's from Moto). RSD is a program by Moto to flash roms (and signed kernels) using fastboot
AND PLEASE READ THIS http://forum.xda-developers.com/showthread.php?t=1778853
Don't post in the dev section unless you made something.... such as a rom or mod
Click to expand...
Click to collapse
Agreed :thumbup: . This thread should be deleted
Sent from my MB865 using xda premium
Opps...m so sorry....!!
can i move my post...?
No don't sweat it.... I reported it to a mod to move it
farshad525hou said:
No don't sweat it.... I reported it to a mod to move it
Click to expand...
Click to collapse
thanx..man..
great help...!
Thread moved
Moving in progress....
Man, I need a bulldozer for all those images
MD
Moscow Desire said:
Moving in progress....
Man, I need a bulldozer for all those images
MD
Click to expand...
Click to collapse
MD, could you lock as well?
Thanks a mil...
Sent from my MB865 using xda's premium carrier pigeon service
To the OP, just a note, you can't run AOSP or AOKP roms right now (CM7 or KANG), I noticed that was what you were after in your OP. Sadly with the bootloader that we have it is just not something we can do.
However there are plenty of great ROMs in dev section that do work very nicely on this phone.
jimbridgman said:
To the OP, just a note, you can't run AOSP or AOKP roms right now (CM7 or KANG), I noticed that was what you were after in your OP. Sadly with the bootloader that we have it is just not something we can do.
However there are plenty of great ROMs in dev section that do work very nicely on this phone.
Click to expand...
Click to collapse
thanx a lot...
Can u please suggest me one or two ROMs....
chandu911 said:
thanx a lot...
Can u please suggest me one or two ROMs....
Click to expand...
Click to collapse
Take a look in the development section. ROMs and what people like and dislike are so personal, that what I might like, you might not. There are a ton of great ROMs for this phone over there.
I have run all of them, and I go back to Lithium a lot, becuase it has peices and parts from AOSP in it. Again though take a look at all of them and the pictures that are posted of the ROMs and read the descriptions very well, as well as read through some of the posts, people in there will tell you more than you might want to know about bugs and such in the ROMs that might give you a better idea, of what will work for you.
Here is a link to our development section:
http://forum.xda-developers.com/forumdisplay.php?f=1376
jimbridgman said:
Take a look in the development section. ROMs and what people like and dislike are so personal, that what I might like, you might not. There are a ton of great ROMs for this phone over there.
I have run all of them, and I go back to Lithium a lot, becuase it has peices and parts from AOSP in it. Again though take a look at all of them and the pictures that are posted of the ROMs and read the descriptions very well, as well as read through some of the posts, people in there will tell you more than you might want to know about bugs and such in the ROMs that might give you a better idea, of what will work for you.
Here is a link to our development section:
http://forum.xda-developers.com/forumdisplay.php?f=1376
Click to expand...
Click to collapse
Thnks Jim...
Some how i am able to enter the recovery mode of the fone...but while "updating from zip" (tried to change the recovery to CWM) it shows a error called "E signature verification failed installation aborted"...
Stuck again...!
chandu911 said:
Thnks Jim...
Some how i am able to enter the recovery mode of the fone...but while "updating from zip" (tried to change the recovery to CWM) it shows a error called "E signature verification failed installation aborted"...
Stuck again...!
Click to expand...
Click to collapse
Signature failed? Are you on ICS or GB?
Fall of Enosis said:
Signature failed? Are you on ICS or GB?
Click to expand...
Click to collapse
i am on GB (2.3.6)...
i am trying to go to some other ROM or ICS..but not able to...
in posts i have searched..everything is so easy...but when i try to do the same on my atrix...it become a hell lot of steps..and at the end...nothing happens..!!
Prior i had a Samsung Vibrant with Eclair 2.1...i have done ODIN for that a several times...but for Atrix...its very much difficult...
m even not able to go to the RSD option...
chandu911 said:
Thnks Jim...
Some how i am able to enter the recovery mode of the fone...but while "updating from zip" (tried to change the recovery to CWM) it shows a error called "E signature verification failed installation aborted"...
Stuck again...!
Click to expand...
Click to collapse
For installing ROMs you need to choose "Install zip from sdcard" - or "Restore" depending on which ROM... Wait, what are you trying to do? Do you have the A2 Bootstrap installed?
Ok so do you have the bootstrap apk installed? You need that to boot into cwm.
EDIT: lol, just saw your post alt. 2 great minds think alike?
Sent from my MB865 using xda premium
Fall of Enosis said:
Ok so do you have the bootstrap apk installed? You need that to boot into cwm.
EDIT: lol, just saw your post alt. 2 great minds think alike?
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Thanks Great minds....lol... (alteredlikeness and Fall of Enosis)
Thanks for ur replys...
Actly m trying to install bootstrap.apk...but as soon as i choose "recovery to CWM"..then the phonr reboots and goes into a "AP FAST BOOT mode" and following message comes on the screen.
AP FAST BOOT MODE (FLASH FAILURE)
0A.65
BATTERY OK
OK TO PROGRAM
CONNECT USB
DATA CABLE....
and this message comes every time i try to reboot my phone...
chandu911 said:
Thanks Great minds....lol... (alteredlikeness and Fall of Enosis)
Thanks for ur replys...
Actly m trying to install bootstrap.apk...but as soon as i choose "recovery to CWM"..then the phonr reboots and goes into a "AP FAST BOOT mode" and following message comes on the screen.
AP FAST BOOT MODE (FLASH FAILURE)
0A.65
BATTERY OK
OK TO PROGRAM
CONNECT USB
DATA CABLE....
and this message comes every time i try to reboot my phone...
Click to expand...
Click to collapse
Pull the battery... then when you power up hold BOTH the volume up + volume down buttons. When the menus pips up select boot normally.
Sent from my MB865 using xda app-developers app
I made this for myself to make it easier to get google wallet working after I flash a rom, or when I'm just out and about. All this does is replace the build.prop with one that has the necessary changes to it.
From this:
ro.product.model=SCH-I535
ro.product.name=d2vzw
ro.product.device=d2vzw
To This:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
I have only tested this on my d2vzw on a CM10 based rom. Figured I would share in case anyone else wanted to save a couple seconds.
Thank's to imnuts for helping me figure out how to make a flashable zip!
EDIT: including the other zip I made to go back to normal when you don't need wallet.
Thanks
Edit : Google wallet keeps telling me to turn nfc on using aokp... Even after I do it. *Le sigh *
Sent from my SCH-I535 using xda premium
blestsol said:
Thanks
Edit : Google wallet keeps telling me to turn nfc on using aokp... Even after I do it. *Le sigh *
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
That's a new one for me, did you try to clear data in the wallet app? Should be working fine if NFC is turned on.
imneveral0ne said:
I made this for myself to make it easier to get google wallet working after I flash a rom, or when I'm just out and about. All this does is replace the build.prop with one that has the necessary changes to it.
From this:
ro.product.model=SCH-I535
ro.product.name=d2vzw
ro.product.device=d2vzw
To This:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
I have only tested this on my d2vzw on a CM10 based rom. Figured I would share in case anyone else wanted to save a couple seconds.
Thank's to imnuts for helping me figure out how to make a flashable zip!
Click to expand...
Click to collapse
Sorry for the noob question. Where do I install this?
sebastianraven said:
Sorry for the noob question. Where do I install this?
Click to expand...
Click to collapse
You install it in recovery, like a rom or kernel.
imneveral0ne said:
That's a new one for me, did you try to clear data in the wallet app? Should be working fine if NFC is turned on.
Click to expand...
Click to collapse
Wasn't working for aokp10 until the most recent build
Sent from my Galaxy Nexus using xda premium
blestsol said:
Wasn't working for aokp10 until the most recent build
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
I'll flash aokp and try it out, is it the XDA version of AOKP, or the RootzWiki one that you're using?
sebastianraven said:
Sorry for the noob question. Where do I install this?
Click to expand...
Click to collapse
Why you need to change the original version to the new one for S3? The original is not working?
buhohitr said:
Why you need to change the original version to the new one for S3? The original is not working?
Click to expand...
Click to collapse
Google Wallet doesn't support the verizon SGS3, so you have to change build.prop to make the phone think its a GSM Galaxy Nexus in order to get Google Wallet to work.
imneveral0ne said:
I made this for myself to make it easier to get google wallet working after I flash a rom, or when I'm just out and about. All this does is replace the build.prop with one that has the necessary changes to it.
From this:
ro.product.model=SCH-I535
ro.product.name=d2vzw
ro.product.device=d2vzw
To This:
ro.product.model=Galaxy Nexus
ro.product.name=yakju
ro.product.device=maguro
I have only tested this on my d2vzw on a CM10 based rom. Figured I would share in case anyone else wanted to save a couple seconds.
Thank's to imnuts for helping me figure out how to make a flashable zip!
Click to expand...
Click to collapse
Is this working with the newer (nightly) versions of cm10
macmx said:
Is this working with the newer (nightly) versions of cm10
Click to expand...
Click to collapse
Should be, I tested it on a build from 2 day's ago and it worked fine for me. Flashing AOKP right now to see if it works as well.
This does in fact work with 8/31 AOKP build, had to flash this before I installed Google Wallet from the market, it installed, and Wallet booted right up for me.
I have used build.prop to get Wallet working before, but I can never seem to keep it working after going back to d2vzw. Anyone know what I might be doing wrong?
Sent from my SCH-I535 using Tapatalk 2
ka1z0ku said:
I have used build.prop to get Wallet working before, but I can never seem to keep it working after going back to d2vzw. Anyone know what I might be doing wrong?
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
You are doing nothing wrong, if you go back to d2vzw, it won't work anymore. That's why I made the zip, for when I'm out and wanna use wallet, I can just flash the zip, and wallet works for me. Then I made another zip to flash after I'm done with it, that will flash it back to d2vzw.
imneveral0ne said:
This does in fact work with 8/31 AOKP build, had to flash this before I installed Google Wallet from the market, it installed, and Wallet booted right up for me.
Click to expand...
Click to collapse
Yup, newest one xoomdev released fixed my issues.
Sent from my SCH-I535 using xda premium
imneveral0ne said:
You are doing nothing wrong, if you go back to d2vzw, it won't work anymore. That's why I made the zip, for when I'm out and wanna use wallet, I can just flash the zip, and wallet works for me. Then I made another zip to flash after I'm done with it, that will flash it back to d2vzw.
Click to expand...
Click to collapse
OK I just remember reading at the end of some posts that ppl were changing their build.props back and using wallet... I could never figure it out. I get tired of wiping and reinstallibg every time I flash a new ROM too lol.
Sent from my SCH-I535 using Tapatalk 2
ka1z0ku said:
OK I just remember reading at the end of some posts that ppl were changing their build.props back and using wallet... I could never figure it out. I get tired of wiping and reinstallibg every time I flash a new ROM too lol.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Haha you're not alone
I attached the other zip I use to the first post, so just flash WalletWork to get wallet working, and flash WalletNotWork to set it back to d2vzw. Hope it help's you out like it has me.
ka1z0ku said:
OK I just remember reading at the end of some posts that ppl were changing their build.props back and using wallet... I could never figure it out. I get tired of wiping and reinstallibg every time I flash a new ROM too lol.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Mine loads fine when I change it back to the stock settings. Haven't had a chance to use it yet but it recognizes my credit card that I set up and my free $10 gift card.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TAPPED in on my (now unlocked bootloader) Verizon S3
question
So for clarity sake... If you are rooted with a custom rom... You can flash this at any time? Do you have to flash this before installing the app? And is there any harm in leaving the new build.prop file ?
Need to know what issues I might run into. I do like the easy flash method.
Thanks
imneveral0ne said:
You are doing nothing wrong, if you go back to d2vzw, it won't work anymore. That's why I made the zip, for when I'm out and wanna use wallet, I can just flash the zip, and wallet works for me. Then I made another zip to flash after I'm done with it, that will flash it back to d2vzw.
Click to expand...
Click to collapse
It should continue to work as long as you don't clear the wallet app before reflashing the build prop back to the stock.
Sent from my SCH-I535 using xda app-developers app
This is the new VRALG7 update from Verizon!
Two falvors, Odex or De-odex!
Stock Rooted
busybox
init.d support
unsecured boot.img
No other mods!
Must have unlocked bootloader!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download HERE
Please hit Thanks!
MODS!
I have made an assortment of mods for these ROMS. You can find them HERE
Sharing Policy
The spirit of Open Source is to share your knowledge and files with the rest of the world so they can improve on what you do when possible. This is also my philosophy and I would never compromise that!
You are free to use this ROM or any part of this ROM any way you like as long as you give a link back to this thread or my website, www.scottsroms.com
Do not use my work if you cannot give proper credits!
Consider this your permission! Please do not PM me asking if its OK to build off this ROM. Permission granted!
However this does not include my CleanROM series of ROMS. Please do not use those without contacting me first!
This ROM is not a CleanROM. Its a stock rooted and all yours!
Please "Thank" this post
Ok, The De-Odex is up!
And the MD5 Matches!
Took three times and for some reason it got corrupted. I'm skipping the Odex unless someone really wants it... 95% of of people want De-Odex anyways.
MAKE SURE YOU CHECK THE MD5!
Thank you!
Sent from my SCH-I535 using Tapatalk 2
Rob_Storm said:
Thank you!
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Your welcome....
Site seems to be runnign slow, maybe thats why the first 2 uploads were bad. Be patient, lol
MD5 was correct on first download. Was quick also.
Sent from my SCH-I535 using Tapatalk 2
Rob_Storm said:
MD5 was correct on first download. Was quick also.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I think my site was acting stupid early this morning. I uploaded it three times and the third time took. I dont know why, its NEVER done that before.
Thanks for this. Just loaded it and first thing I noticed was a fc on internet browser. Downloaded chrome and it works fine. Just can't use stock browser
Sent from my SCH-I535 using Tapatalk 2
I think I'll use this thanks much Scott
Sent from my SGH-I535 using xda premium
tombepa said:
Thanks for this. Just loaded it and first thing I noticed was a fc on internet browser. Downloaded chrome and it works fine. Just can't use stock browser
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I think this ROM may require a certain set of permissions or something. Not sure. May have to look at the updater script. Heading to ed soon so... Maybe someone else can figure it out. I only tested the My VZW and it failed but messaging and calls were good. Its a dump from my phone so who knows
remf4i said:
I think I'll use this thanks much Scott
Sent from my SGH-I535 using xda premium
Click to expand...
Click to collapse
Test it for bugs. Seems glitchy :crying:
Im assuming you lose root if you accept thebupdate being pushed ? And if so can the same roit methods stil work to re root?
Sent from my SCH-I535 using xda premium
dawiseguy77 said:
Im assuming you lose root if you accept thebupdate being pushed ? And if so can the same roit methods stil work to re root?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Yep, thats what I did to get this... I odin'ed back to G1, then I accepeted the OTA and the same root method works and the same aboot unlock method worked.
Im currently using your deodex stock g1 rom saw this but also saw there were some bugs so was thinking of doing ota, maybe ill just wait for the kinks to be worked out on this one, but i do need my crap mods too. So ill be waiting a while lol.
Sent from my SCH-I535 using xda premium
Is this much different from cleanrom? I am on the latest cleanrom and cleankernel 1.2 and very happy with it so I am wondring if is even worth it flashing this?
ljbrenes said:
Is this much different from cleanrom? I am on the latest cleanrom and cleankernel 1.2 and very happy with it so I am wondring if is even worth it flashing this?
Click to expand...
Click to collapse
Scott indicated there are bugs. Possible issue with stock browser. Kinda Crap mods not tested to work. AFAIK, the latest and greatest that's stable is the G7 radios, CleanROM 2.1 and CleanKernel 1.2, all three of which have been reported to work very well together (including for myself). Hope this helps.
--more--
Sorry, forgot to answer your question...lol...this is MUCH different than CleanROM. CleanROM has all or most of the bloatware / Verizon crap removed, as well as a lot of background apps and services disabled or removed as well. The OTA has nothing removed and is only rooted (meaning you can use Titanium Backup, ES File Explorer and other system-type apps as root).
wmaudio said:
Scott indicated there are bugs. Possible issue with stock browser. Kinda Crap mods not tested to work. AFAIK, the latest and greatest that's stable is the G7 radios, CleanROM 2.1 and CleanKernel 1.2, all three of which have been reported to work very well together (including for myself). Hope this helps.
--more--
Sorry, forgot to answer your question...lol...this is MUCH different than CleanROM. CleanROM has all or most of the bloatware / Verizon crap removed, as well as a lot of background apps and services disabled or removed as well. The OTA has nothing removed and is only rooted (meaning you can use Titanium Backup, ES File Explorer and other system-type apps as root).
Click to expand...
Click to collapse
Where did you find G7 radios? Haven't heard anything about an flashing them.
Sent from my SCH-I535 using xda app-developers app
tu3218 said:
Where did you find G7 radios? Haven't heard anything about an flashing them.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Stickied in the Development section, been there for a few days.
tu3218 said:
Where did you find G7 radios? Haven't heard anything about an flashing them.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
SlimSnoopOS said:
Stickied in the Development section, been there for a few days.
Click to expand...
Click to collapse
Here's a link. http://forum.xda-developers.com/showthread.php?t=1788313
It's pretty easy to miss if you're like me and skip the stickies.
mb27 said:
Here's a link. http://forum.xda-developers.com/showthread.php?t=1788313
It's pretty easy to miss if you're like me and skip the stickies.
Click to expand...
Click to collapse
Plus its called from modems not radios lol
Sent from my SCH-I535 using xda premium
I just received notice that I had an update on my Skyrocket. I'm rooted with CWM bootloader so it didn't take. Is this by chance Jelly Bean?????
Sent from my GT-P7310 using Tapatalk 2
No
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Nope
Sent from my SGH-T999 using Tapatalk 2
What you have to do is unroot and go back to stock to get the new update.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
update contains?
someone please tell what this 44mb ota update that became available this morning entails.
any way for someone with twrp recovery to install this ota since twrp interupts the update? through kies? or, any way to install the factory recovery back after having installed the twrp recovery?
If it's only 44MB, it's sure as hell not JB, so I wouldn't worry about that.
You can always get the stock recovery back by using ODIN to restore back to stock if you really want to see what the update is.
If you search, I'm sure you'd find out what is. I know its been posted already. All I can remember for sure is the new baseband.
Edit: http://forum.xda-developers.com/showthread.php?t=1956299 (pg 2)
Sent from my SAMSUNG-SGH-I727 using XDA
thanks
btm fdr said:
If you search, I'm sure you'd find out what is. I know its been posted already. All I can remember for sure is the new baseband.
Edit: http://forum.xda-developers.com/showthread.php?t=1956299 (pg 2)
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
thank you, i just read what this update entails at the link you posted.
---------- Post added at 04:22 AM ---------- Previous post was at 04:04 AM ----------
T.J. Bender said:
If it's only 44MB, it's sure as hell not JB, so I wouldn't worry about that.
You can always get the stock recovery back by using ODIN to restore back to stock if you really want to see what the update is.
Click to expand...
Click to collapse
i just found one stock recovery tar and will flash it using odin ( it is from an old post, july of this year ) and at the download link for the stock recovery tar md5 file it said it was not tested - so not certain if it is safe to not brick. stock recovery tar md5 for skyrocket is hard to find. that is what sucks, once you load a custom recovery, hope it is possible to get back to stock recovery.
thank you.
monsruzo said:
thank you, i just read what this update entails at the link you posted.
---------- Post added at 04:22 AM ---------- Previous post was at 04:04 AM ----------
i just found one stock recovery tar and will flash it using odin ( it is from an old post, july of this year ) and at the download link for the stock recovery tar md5 file it said it was not tested - so not certain if it is safe to not brick. stock recovery tar md5 for skyrocket is hard to find. that is what sucks, once you load a custom recovery, hope it is possible to get back to stock recovery.
thank you.
Click to expand...
Click to collapse
You could get it from sammobile.com too I believe. Just make sure you get the one for the SR.
Sent from my SAMSUNG-SGH-I727 using XDA
So what exactly are the new features? I got the update but haven't noticed any changes.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
RewinX said:
So what exactly are the new features? I got the update but haven't noticed any changes.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
it ensures you have all the att apps and seems to be a new radio ( which is the part i would like to try, maybe it will use less battery power and/or get better coverage connectivity to lte cell towers )
Don't want any updates
I don't want the update. Anyone know if there's a way to avoid the nag screens from the carrier? Or if they will eventually just go away on their own?
Tref said:
I don't want the update. Anyone know if there's a way to avoid the nag screens from the carrier? Or if they will eventually just go away on their own?
Click to expand...
Click to collapse
root the device, they'll go away.
But I'm not aware of getting rid of the prompts on stock. Maybe accept it and do not let it complete the update download?
dac1227 said:
root the device, they'll go away.
But I'm not aware of getting rid of the prompts on stock. Maybe accept it and do not let it complete the update download?
Click to expand...
Click to collapse
It is rooted...so from what I've been reading it won't actually be updated. But I don't want to be faced with nag screens from now till I buy a different phone either.
Tref said:
It is rooted...so from what I've been reading it won't actually be updated. But I don't want to be faced with nag screens from now till I buy a different phone either.
Click to expand...
Click to collapse
Freeze device management
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Freeze device management
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
How?
I let it download, and then because I'm rooted it failed as expected, which is fine because I don't want the update anyway. I just rebooted and it seems to have stopped the nagging.
Anyone know how to turn off device management? Or to where the pkg was copied so that I can rename it?
Thanks
Tref said:
How?
I let it download, and then because I'm rooted it failed as expected, which is fine because I don't want the update anyway. I just rebooted and it seems to have stopped the nagging.
Anyone know how to turn off device management? Or to where the pkg was copied so that I can rename it?
Thanks
Click to expand...
Click to collapse
Buy titanium backup and freeze it. Or use the free version and delete it
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Buy titanium backup and freeze it. Or use the free version and delete it
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I have Titanium Pro and froze DM. Thanks sent.
Wish I had known to do that before I let it download.
Any idea where the update was saved to, and what it is named? I'd like to get rid of it.
I can't remember where it saves to. Maybe you can find it with root explorer.
Sent from my GT-P5113 using Tapatalk 2
I have not seen what it updated. Been running factory since July.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2