according from sir kurotsugi's thread
i've been searching for 3 hours about flashing kernel but i got nothing
can anyone help me for flashing kernel?
in another flashing kernel thread i saw they packed the kernel on .zip but from sir kurotsugi's thread he packed the kernel on .img
then i tried to replace .img from sir kurotsugi's to another kernel's .img inside the .zip and flash it via cwm but it's not worked.
my device is sgy gt-s5360
I don't have a Y, but i think u should replace the kernel in the boot.img and flash it though a .zip
Looks like that is what he has already done..that mediafire link.
Just rename it, partition ur sdcard and flash, follow the instructions given there.
Ok, wait.
boot.img can be flashed through odin.
If it's been packaged into a .zip then it is mean to be flashed through a custom recovery like CWM.
Ask in the Galaxy Y Q/A...u might not get much help in general q/a here.
Related
When having to flash the cm9 recovery before installing there is an easier way by using your phone.
1. Download the cm9 recovery tar of the developing page
2. On your phone, download sgs kernal flasher from the play store
3. Download root explorer from the play store
4. Go into root explorer and extract the zimage file from the cm9 recovery tar
5. Open sgs kernal flasher and navigate to where u extracted the image file
6. Select the file and then hit flash
TAH DA!!!!
Now u can flash cm9
Hope I helped
Please hit thanks button if so
I tough sgs kernel flasher only flash kernels. Didnt know it flashes the whole recovery file . anyways do we need to be on gb bootloaders and what about gapps？ reboot in recovery mode and flash.. im only asking because i have not flash ics yet. Still on gb 2.3.6
send from my infuse4g
This has been covered in many "how to" post
And its part of JTs and Entropys
Instructions on how to flash CM9
Mods should delete thread to avoid clutter and confusion
Also this is not a Q
Dixinormous said:
When having to flash the cm9 recovery before installing there is an easier way by using your phone.
1. Download the cm9 recovery tar of the developing page
2. On your phone, download sgs kernal flasher from the play store
3. Download root explorer from the play store
4. Go into root explorer and extract the zimage file from the cm9 recovery tar
5. Open sgs kernal flasher and navigate to where u extracted the image file
6. Select the file and then hit flash
TAH DA!!!!
Now u can flash cm9
Hope I helped
Please hit thanks button if so
Click to expand...
Click to collapse
Why not just follow these directions...just flash one file twice...
http://forum.xda-developers.com/showthread.php?t=1601844
jason4962 said:
I tough sgs kernel flasher only flash kernels. Didnt know it flashes the whole recovery file . anyways do we need to be on gb bootloaders and what about gapps？ reboot in recovery mode and flash.. im only asking because i have not flash ics yet. Still on gb 2.3.6
send from my infuse4g
Click to expand...
Click to collapse
If ur not on gingerbread boot loaders the recovery will have a messed up rainbow look but is still usable. The gapps u flash after u have already flashed the cm9 rom. All in cwm recovery
Thread closed.
The post has been covered in several how-to's and this it's not a question.
am trying to flash overclock kernel, am using cmw7.1...while flashing its says error installation aborted...plz help am dying to overclock my galaxy fit
make sure that your overclock kernel you flash , its a file.zip not file.md5
ya its a zip file am using....going into recovery mode....mount/system..then flashing still no luck...
I apologize, I posted an off base response. Read it wrong. Trying to delete comment.
NEWBIE ALERT
Hey guys, I installed cwm through ODIN and it looked like this http://static.masterjason.com/images/xda/cwm-herc-4-0-0-2.png
I then flashed my ROM from stock GB to stock ICS(xxq7)
But the look of my CWM has changed from http://static.masterjason.com/images/xda/cwm-herc-4-0-0-2.png to *WILL UPLOAD*
Home button DOES NOT WORK I have to select thing by pressing the power button.
And inorder to go back I need to navigate to the "..." and select "..."
Kindly help asap as I want to flash ardadat's kernel.
Also enlighten me on HOW TO FLASH A KERNEL!
Thanks.
And MAZEL II dl links aren't working, kindly look into it
First of all this type questions belongs to Q'nA board. As now we are having Q'nA board kindly use it for posting any questions.
As u said u have flashed stock ICS upon ur stock GB. Stock roms (odin flashable packages) comes with stock recovery software. When u flash whole stock rom package it also replace ur recovery and I think that's y after flash u see different recovery software. Simply just flash any CWM package using odin. (U can find collection of adam in dev section).
About flashing kernels. Most of all kernels available for our device are provided in CWM flashable zips by their devs. Simply place zip on ur sd card. Boot in recovery and select install zip. Navigate to zip file and flash it. Kernel will be flashed.
Sent from Galaxy R using Forum Runner.
Okay, So I flashed the kernel
Thanks!
Hello.
I currently have my pico with stock rom, with sense 3.5. and i'm tryin to flash a new rom, but every time i try to flash one from this thread ( http://forum.xda-developers.com/showthread.php?t=1754876 ) i got stuck on htc logo screen. and i cant get passed it... i've wiped everything, reflashed kernel, reflashed stock, but still cant get it to work. maybe these kernels arent for stock roms, if they're not, can you point some kernels that work on stock?
thanks in advance.
Stock rom should have stock kernel too.
Flash the gingerbread kernels.. they must work. PS: The ROM.zip already contain kernels that get installed when the zip is flashed.
Red Devil said:
Flash the gingerbread kernels.. they must work. PS: The ROM.zip already contain kernels that get installed when the zip is flashed.
Click to expand...
Click to collapse
where can i find those gingerbread kernels? so if they're inside the "rom.zip" is it possible to "extract" them to a flashable zip? only the kernel withouth the rom itself...?
Gingerbread kernels are in the Index of all kernels..
From the ROM.zip if you want to extract them then just extract the boot.img normally and also extract the modules from the zip .. in /system/lib..
In fastboot mode flash boot.img via :
Code:
fastboot flash boot boot.img
and
then via adb push the modules. I suggest you search a bit and find some answers yourself . Its easier that way cause these questions have been answered millions and millions of times. So use the search function
i've searched, and believe me when i say that i havnt found anything about this... all the kernels i go for, on the thread only talks about the kernel itself and not the roms compatible... and i've tried that method and got stuck on htc green logo... thanks for answering
these kernels work on stock rom:
1- cranium kernel
2- ateeq kernel
3- garuda's kernel
search them in the development thread I hope you'll find them.
i've tried all those kernels... one by one and never got passed the htc green logo... always get stuck there... i tried flashing trough fastboot and trough recovery... nothing works... any other suggetions?
try to flash ateeq rom then ateeq kernel..it works for me.
but i dont want to have ateeq rom, i want to stay with my stock rom, but change the kernel... only that. but thats for answering. i'm getting used to the idea that i cant be changed (the stock kernel).
thanks
Need urgent help
i had rooted my pico months back and was on different custom roms......now i want 2 get back to the stock rom which i have downloaded Odexed Stock ROM Flashable Zip (With Link2SD Support)(Revision 3)(http://forum.xda-developers.com/showpost.php?p=40385554&postcount=76) and i have flashed this rom 5 - 10 times and everytime i reboot after flashing the rom.....i am stuck on htc boot logo.....can u plssssss help
I want to flash .zip Rom with odin v3.07
I've downloaded nolekat rom for my samsung tab 3 neo I was just trying to root it from odin and somehow it stuck at boot logo now. So I have downloaded rom and it is in .zip extension can I change it's name to .tar or .tar.md5
or is my thinking is wrong?
You have to download firmware, you can't flash custom roms with odin only stick firmware, try Sammobile
Sent from my SM-G386T1 using Tapatalk
You use a custom recovery such as twrp or CWM to flash roms. I suggest doing some reading of the How to's and tutorial threads in your device section to learn more.....before you accidentally destroy your device. Odin is for official firmware, as said above. Be very careful with what you flash and how, or your device can become a paperweight quickly.
Read up first, then do. :good:
close thread
Thanks for replying to my post I fixed problem and requesting to close this thread. Thanks