Related
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
SystmDcln said:
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
Click to expand...
Click to collapse
I have it and I like it.
Pros:
Thick enough to provide reasonable impact resistance without adding so much bulk you want a trailer for it
It has a felt/microfiber lining that makes contact with the phone, reducing wear on phone surfaces
It removes easily for docking, battery changes and the like
It's not horrid looking
Cons:
Doesn't cover the area below the screen around the trackball
It doesn't look great compared to an uncovered Nexus One
Pricey
I can't improve on this pic:
http://assets2.smartphoneexperts.com/images/product_images/accessories/additional_images/6392/large/2.jpg
I like it! Just got it in last night to replace my Case-Mate Tough Case. The Tough Case was solidly built and looked like it would probably take some serious tumbles. However the rubber trim around the screen and buttons picked up pocket lint like mad. Fortunately Case-Mate has a 100% refund on returns policy. If you don't keep your phone in a pants pocket all day and don't mind a bulkier case the Case-Mate is the way to go.
That being said, the Innocase will probably protect against most of the accidental drops you'll encounter. Previously I had an iPhone 3GS and a 2G since launch and in both cases I used the Agent18 Eco Shield slider case which is a very similar design. I'm sure that over the years I've managed to slide both of those phones over 100ft on concrete and tile without damage after fumbling them.
Try Amazon, esp. the partner retailers. I got mine for $25 shipped.
The Innocase II is a very nice case, the rubbery kind of exterior feels really great in your hands and doesn't pick up lint on the exterior. It should be able to provide reasonably good protection against drops, though I haven't had any experience with dropping my Nexus yet.
The only downsides to this case are:
1. Does not work well with all screen protectors because it fits extremely well. Read that it can't fit on top of Martin Fields screen protectors due to this, but I haven't tried it myself.
2. Picks up lint between the case and the phone. The felt lining to protect the back of the case which protects the phone when you slide it in and out of the case creates a space where the lint gathers.
I've been using the CM Tough for a while now. While it's a great case for protection (very reassuring), its very bulky, and the silicone inner traps all sorts of dust and hair from the inside of my pockets.
For the past month or so, I've been walking around with my phone in my hand, fearing the attack of the lint, and wiping the lint and dust off the silicone whenever I could.
I've decided that if my friends can have sexy, slim cases for the iPhone, allowing it to come easily in and out of the pocket, there's no reason I shouldn't do the same.
Protection, for me, isn't that much of a problem. The easiest way to protect your phone is to basically not drop it, and in the half year I've had my phone, I've never dropped it once.
SO, I've been looking at...
The Momax iCase Pro: TPU sides and plastic back, slim.
SGP Slider: Hard case with cutouts for the volume/power. Looks rather slim.
Not a big fan of cases that don't cover the bezel. I honestly don't get the point, no scratch protection for bezel, and I can't put my phone face-down.
Are there any more cases I should be aware of? Are there people who can give a mini-review for the cases I mentioned above?
Thanks!
Have a look at this, just picked one up yesterday
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Fits perfectly on my European GT I9000, feels much nicer than bare phone or hard silicon case I previously used, and it's as easy to get out of your pocket as the bare phone. The only issue you might have is with the bezel, as it doesn't really cover it, rather it leaves the psuedo chrome visible, and only adds at most 0.5mm clearance if you place the phone face down.
Personally, I'm very happy with it. The phone is grippier, the volume and power buttons are much easier to use, and it looks good.
Headphone jack access is better too.
Read the reviews on the link.
Here's another I had a look at recently, seems to give great protection, but it's fiddly to get on and off if you need to do a battery pull, and I didn't like the squidgy button covers, but it might be more in the line of what you're after.
http://www.otterbox.com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS-20-E4OTR_A,default,pd.html
I also use the Case Mate Barely There and it is the best I have tried so far.
It doesn't collect dust and the phone slides into the pockets.
I prefer the Momax. My workmate has the barely there, which is slightly slimmer but at the expense of losing some protection. The momax is the best option if you want slim but can still feel comfortable that your phone is safe imo.
I also had the toughcase and became frustrated with it for the same reasons as you. I'm very happy with the momax. Only issue is the power button is a bit harder to push now but a small price to pay.
Sent from my GT-I9000 using XDA App
Using the SGP Ultra slider, totally in love with it as i prefer to have direct access to hardware buttons
I have the Momax case and I have to say, it's pretty good.
http://forum.xda-developers.com/showthread.php?t=790318 - PhoenixFX has provided a review here.
Things i like:
It has a hybrid design, the back is not fully rigid but feels solid, soft sides.
Sides are flexible enough so that it goes on easy but stays in, also like how TPU doesn't become stretchy like silicone .
Lip that protects the screen, didn't notice too much dust getting in.
It's easy to keep a good grip on it.
Dislikes:
As the one posters above me said, the power button is harder to press. the same kind of applies for the volume keys but nor as much. It might be annoying in the long run.
Other than that the case is perfectly fine although I don't really know if it can be classified as slim by my standards , the back plate part is around 1.5mm thick. The back is a matte finish that doesn't offer too much grip but the sides are very grippy.
Hope this helps (I haven't tried any of the other cases so I can't really compare).
i think, case mate barely there is really good for slim profile somehow. and also capdase soft jacket xpose 2 also looks okay.
Check out carrymobiles, melko cases as well
I use the same Case-Mate Barely There case as DMD9, and I don't see myself changing it anytime soon. Very sleek, provides a little bit of a rubbery feel but not enough to make it difficult to slide out of pockets
After protecting my SGS like a baby for the last 11 or so months, it has suffered some damage here and there (home button doesn't work very well, scratches etc).
Thus I decided to ditch the case and go totally slimline with a replacement battery cover (the stock one is a fingerprint magnet, and I have kinda sweaty hands!). Ordered a silver one from focal price (the ones with the samsung logo, but clearly fake) and its a pretty good fit.
I totally recommend going caseless, it fits so well in the pocket when you go out!
I also support caseless usage,
I had a invisibleshield protector on the phone for a few months and that one worked well but it came off.
Now i still use the phone as if there was a protector on it and....not a scratch added.
the screen can really handle some abuse
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
What I need:
- This is a question: Whats the difference between hard cases (plastic) and soft cases (rubber)? Obviously besides the material
- The phone with the case on MUST still be able to be inserted without major problems into the pockets of a jeans pants (I see this a bit for difficult for rubber cases)
- I would still like to access everything, button/port wise (except maybe the back cover)
- No difference in using the keyboard or the phone in general
- Very easy to remove and put on the case from and to the phone
- Seeing as the phone is kinda heavy as is, a light material would be nice.
- No reception issues
A clear or a green case would be my personal choices as clear the phone is still visible and I like the color green Also my media player use to have a kickstand which would be nice but I care less...
Thanks
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HT...HTC4-G2XXX_color=20&start=1&cgid=htc-g2-cases
Got mine with a free car charger on ebay for about $30
from dustrho's thread about HTC cases
GREEN CASE
http://www.youtube.com/watch?v=UQObS6fsY6Q
http://www.wirelessground.com/t-mobi...ase-green.html
Click to expand...
Click to collapse
Thats the first case I looked at and like. The link is to the rubber version but there is a plastic one as well. Im not sure which to get as I dont know the different "feel" between the two.
Otterbox Commuter case. Solid and rugged case that can withstand almost any abuse you throw at it. Fits nicely into my jean pockets and is easy to whip out when I need it. All buttons and ports are easily accessible. Bulks the phone up just alittle, but I would rather have the bulk and have the phone survive a 4ft drop than have a cheap or flimsy case and have both case and phone go to the garbage.
http://www.otterbox.com/HTC-G2-/-HTC...d=htc-g2-cases
Got mine with a free car charger on ebay for about $30
Click to expand...
Click to collapse
1: Way too expensive
2: Bulks the phone up (making it hard to slide in a pocket quickly)
3: Very very bad looking
The quality looks OK (with port covers and everything) but those 3 things and after viewing a video just throw me off.
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Sent from my Desire Z via XDA App
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
riahc3 said:
Well Ive pretty much gone always against the idea of getting a case but Im seeing one day my poor phone falling and breaking to pieces so rather be safe than sorry.
Click to expand...
Click to collapse
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Sent from my SilverBullet 'HTCDesireZ running CM7'
The difference is just how it feels on your hands. Rubber has a slightly softer feel while the plastic one is smoother but almost slippery (doesnt slip, just feels like it due to its smoothness)
Go for that case if anything. Another way to get a real feel is to drop by a tmo store. They sell both types (atleast where i live) and you can handle it to see if u like it.
Click to expand...
Click to collapse
But doesnt the rubber one have a "grip" as well? It would seem logical.
I got the otterbox commuter a while back. it's nice, rubber inside, hard plastick outside, two layer case. There is rubber covers for usb and headphone jacks.
Case has nice texture on the backside, gives nice grip.
If you use headphone whit bulky 3.5mm like steel series siberia, it wont fit in whit the case. but any earplugs will fit just fine.
case makes the power button more easily accessible, like it.
the camera button is ****ed up. it's way to hard to press, and you dont feel the 2-stage shutter whit this case, you could easily cut the button covering part of tough.
i have put it back on and of multiple times, ans i'm not using it anymore, my front cover has 2 broken clips that keep to case on :/
i trust my grip enough, so i'm not using cases anymore, I have hard plastic shelled belt pouch to carry my phone, so if i fell of a bike or something hits me in the pocket, this case in pouch, phone will be just fine.
-Whippler
Click to expand...
Click to collapse
Like I commented, the otterbox isnt for me.
These phones are harder to break than you would think. Mine has survived at least 5 falls from about a metre in height onto concrete, and just scuffed up the aluminum edges in two spots
Click to expand...
Click to collapse
Until it falls from one fall from 1/2 a meter into grass and it breaks.
Better to be safe than sorry about making this costly investment.
I never said the rubber one doesn't have a grip. in fact, if i remember correctly, it has such a grip that it keeps on pulling my pockets inside out. go figure.
and as I said, drop by a tmo store and check it out. you'll feel the difference and it'll help you more than just words of explanations.
Check this one out:
http://forum.xda-developers.com/showthread.php?t=1096776
This is the case I am using, LOVE IT!
Best case for me hands down is the oem g1 sock slip case thing.
No need for screen protectors, no scratches on screen now or later
Goes into any pocket, no rubber annoying crap
Costs 3 bucks on ebay
Fits even with the 3600mah mugen battery (big plus for me)
Sent from my T-Mobile G2 using XDA App
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Moved to Q&A
ransz said:
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Click to expand...
Click to collapse
It's aluminum - a pretty soft metal; there probably will be scratches after a time, its just inevitable. But the finish is pretty strong. I've had mine for about 2 weeks and only have one barely noticeable scratch and I'm pretty rough on phones. I'd recommend one eventually. Maybe get a skin if you don't want to add to the bulk.
orangekid said:
Moved to Q&A
Click to expand...
Click to collapse
I had the M7 for a year, and never put a screen protector or body case/skin on it. I used the Seidio Spring Clip Holster for it, and there is just one, barely perceptible, dent in the back.You have to hold it JUST right in low light to even see it. No scratches, and I've even dropped it on the sidewalk (which left a teeny-tiny nick in the beveled edge, again you have to bee looking really hard to see it.)
I have the Spring Clip Holster on order for my just received M8, I plan on running it caseless/skinless as well. I have the dark grey version, and I just can't bear to cover this pretty thing up.
Admittedly, I'm not hard on devices. Were I to take it out in rough conditions (say, camping/hunting/shooting/hiking), I'd probably use a leather belt clip case. As it is, I work in an office. My husband used the Seidio Surface case and holster on his M7, and I have the Seidio Dilex case on the way for his new M8.
If you're a pocket carrier, though, I'd think long and hard about what you tend to keep in the pocket with it. Keys, loose change, pocket knife - no-go. Skin it, or change the way you carry it.
edit: Ok, this thing looks pretty damn tough: https://www.youtube.com/watch?v=-fzr7ULAiEk and https://www.youtube.com/watch?v=lhwvXTVQoPM
You tempt me to go caseless with the htc...
I noticed from videos that the gun metal version is more vaunrable the scratches and small cracks if the device hits the groud.. im guessing its due to the color of the handset...
Decisions decisions...
ransz said:
You tempt me to go caseless with the htc...
I noticed from videos that the gun metal version is more vaunrable the scratches and small cracks if the device hits the groud.. im guessing its due to the color of the handset...
Decisions decisions...
Click to expand...
Click to collapse
Mine is gunmetal, and will be caseless carried in a holster. My husband's is silver, and will be cased in a holster.If I do end up scratching it, I'll probably get a skin for it, like this one: http://www.slickwraps.com/HTC-One-M8-Brushed-Onyx-p/sw-one8-onyx.htm
Like all materials, it will scratch if brushed against something harder than it is. Aluminium is not the strongest of metals and is more easily scratched. Mine has some small scratches on the edges where my car mount holds it. I've since added some felt to the mount to prevent any more marks. In the grand scheme of things they're nothing and I'm sure it will get more as I use it. I feel the phone looks worse with a case of some sort stuck on it than it would with a few superficial scratches. I did get a case for when I know I'll be using it in a more active environment but most of the time I go without a case.
Wasted Money
Spent $25 on a Spigen slim armor case for my wife M8 and three days later she stops using it. Thinking of getting a temper glass screen protector.
Gahar said:
Spent $25 on a Spigen slim armor case for my wife M8 and three days later she stops using it. Thinking of getting a temper glass screen protector.
Click to expand...
Click to collapse
Why did she quit using it?
I love my Slim Armor. It is slim and keeps the design aesthetics of the phone. My grip on the phone is better. A picture is below for those that haven't seen the cases. And they come in different colors that mirror the phone if you want.
I only went a few days without a case and dicked up my gun metal gray phone on two corners with a small drop onto concrete. My case arrived the next day. It still pisses me off.
85gallon said:
Why did she quit using it?
I love my Slim Armor. It is slim and keeps the design aesthetics of the phone. Picture below for those that haven't seen the cases.
I only went a few days without a case and dicked up my gun metal gray phone on two corners with a small drop onto concrete.
Click to expand...
Click to collapse
She loves the phone but she said the case makes the phone taller. I don't want her to drop the phone because all it takes is one drop. I was thinking of putting a temper glass protector.
I have a fairly large scratch on the rear aluminum on my HTC One M8. I believe it got scratched from my retractable badge lanyard clip as I attach it on to my left pocket where my phone resides. It probably rubbed against the clip, introducing the scratch :/
FWIW, This is my first aluminum unibody phone. All of my past phones (EVO, EVO-3D, SGS3, SGS4) never had a single scratch and never had any protection (cases or screenguards) and still look mint. All of them were plastic however.
myn said:
I have a fairly large scratch on the rear aluminum on my HTC One M8. I believe it got scratched from my retractable badge lanyard clip as I attach it on to my left pocket where my phone resides. It probably rubbed against the clip, introducing the scratch :/
FWIW, This is my first aluminum unibody phone. All of my past phones (EVO, EVO-3D, SGS3, SGS4) never had a single scratch and never had any protection (cases or screenguards) and still look mint. All of them were plastic however.
Click to expand...
Click to collapse
surprisingly I went and bought the cheap orignal HTC case that comes with some of the HTC's retailers, its pretty good... i mean its not like otterbox protection or spigen... but it keeps the case very slim and gives u a very good grip in the hand.
ransz said:
So as everyone else in this forum, we all like the design and feel of the new HTC... Im an adict for feeling the metal in my hands and keeping the device as sleek as possible...
I have the silver grey edition, was wondering how sensitive is the phone to scratches if i decide on not wearing a case...
each time I put the phone nakud on a table of some sort, I hear that terrible metal sound scratching the surface of the table...
Am I just having a bad OCD or in the long run i will start seeing some heavy blemishes on the phone's body ?
Click to expand...
Click to collapse
I always dress my phone with good cases. Same as you, I don't want seeing my phone having scratches, dents and blemishes in the future.
case-mate barely there case is great for minimal, the aluminum was too slipery for myself.
This has a nice matte finish to it and add practically no bulk, won't do a whole lot in terms of protection against large drops/bumps, but for small scratches to the back and sides this is great.
I didn't want to put my M8 in a case, but that thing felt like a wet bar of soap in my hand. So I went with this case so I could still see that beautiful brushed aluminum.
Sent from my Nexus 7 using Tapatalk
Always use hard case. It'll prevent your phone from scratches and all. For sweaty hands. And in case it fell, you have an extra protection. That's why I keep my phone with case all the time.
I have my s4 since november and already dropped it three times. Once on a wooden floor and two times on concrete. The phone survived (even the screen) but it got some bruises. The top left and bottom right "corner" of the phone are a bit malformed from the two falls on the concrete. Every time it fell out of my pocket, so it's not a matter of hand grip.
So I decided it's time for some protection.
I have a silicone case. It's one of those book thingies. But it was cheap, it's thin and I'm not really fond of it. Mostly because I have a hard time reaching the buttons.
Yesterday I got a hard plastic case. But the problem with this one is that it only offers protection at the back and the sides of the phone (left and right), the top and bottom are unprotected. And there is the button problem too.
My concern is that when the phone falls down, the most impact is taken up by the margins (I don't remember the technical term). It rarely happens that the phone falls flat on the screen (generally speaking). It mostly falls and hits with the margin first. And that's mostly where the screen starts to break too.
And I don't really want to go overkill with one of those bomb resistant cases :laugh: I don't want the phone to become more bulky (what's the point of a sleek design if it's ruined by a huge case)
I don't use GPS. I heard some metal cases mess with signal reception.
Considering the above, I thought I should go for a metallic bumper, or maybe silicone bumper.
I'm asking for some other user experiences here. What others have found to offer good protection and stuff. And I'm not asking for a product. I'm just asking what type of product (Case or bumper, and whatever other options there are)
I was using S-line silicone cover for my i9070 (SGS Adv) and it was nice all rounder.
Dropped phone form desk on concrete, fell off my pocket on the street ... it was all fine.
It wasn't really much thicker than phone on its own and buttons were easily accessed. I have not tried this type on S4 but I imagine there is one.
Currently in i9505 I have more bulkier case - case mate hybrid tough (2 layers: rubber "inside" similar to every silicone case there is, and plastic outside - looks like what you described as your sides/back only case, with some plastic on the corners) - buttons / screen are a bit "deeper" in the case (thicker ruber overlay on sides than it was on S-line in i9070) but damn it feels like it can survive throw at the wall and bouncing off the ground.
Sent from my TF300T using XDA Free mobile app
Amer shellster
I've been using an Amzer Shellster for my S4 and really happy with it. Cost me £12.89 including delivery. Bumper case adds minimal bulk yet provides goof protection against falls. Really like the hip holster for use running or biking.
Can Anyone recommend me a slim fit cover that fits nicely on the s4, not too expensive but not too cheap. Thanks
Sent from my GT-I9505 using Tapatalk
CaseMate Tough case. Cost me about $20 at Walmart, though it's probably a lot less on Amazon. It fits perfectly, even with a glass screen protector installed on the touchscreen. It also has a textured back which provides the "grippy" feeling that the S4 polycarbonate lacks.
I'm currently using an original Protective cover+, and though it wasn't that cheap I definitely can recommend it. Fits perfectly (of course), no problems with connecting my S4 with a docking station. Since I've got the cover I've "thrown" away my S4 four times. The first "test" was when it fell on the street while pulling it out of my backpack. Second time I used it as a torch and it fell 2 meters down on wooden ground. The other two times it fell on carpet. Nothing happened at all to my good old phone, not even a scratch on the back. Also no problems at all with using the hardware keys or headphone jack.
Otterbox commuter would get the job done. But it makes ur s4 a little bulky. Have to sacrifice that for good protection though.
I have the Spigen Neo case. It's not bulky at all but provides good protection. The case itself have buttons over the phone's buttons. I have a glass screen protector also and the 2 together is nice.
http://www.amazon.com/gp/product/B00BYJXGP2/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
I went for a basic cheap case from dx.com, SKU: 200649. But it does cover all sides, the back, as well as some of the front, due to the overhang from the sides extending out the front. I got a few other cases with different materials at the same time, but this is the one I ended up liking the most.
Thank you all for the replies.
I decided to get a metallic bumper. It does seem to mess with signal strength a bit, though.
But I guess it offers much more protection than rubber/silicone or plastic. It also held together tightly with a pin (You don't just slip the phone in. The bumper can pe opened at one corner, you put the phone in, then close the bumper using the pin). So it won't fly off on impact.
I think this combined with a glass screen protector will ensure optimal protection.
I am using a body glove 3 piece. It has a screen protector and a silicon/rubber outer cover. It was $25 dollars. It hasn't effected my signal and has survived a few falls. I know they sell them at Wal-Mart and Target.