[Q] Custom Rom problems - Transformer TF300T Q&A, Help & Troubleshooting

Has anyone else had problems trying to install roms like cyanogenmod after the Jellybean update? I used to be able to install CM9 nightlys then eventually stable releases and back to stock with no problems, so i am not a noob to flashing roms. Now after I updated to stock 4.1 I cant install CM10 or any other custom roms. I have tried installing through CWM and TWRP but cant get past the ASUS screen after flashing the usual way. I heard there was a change in partition sizes when the update applied. Is there a way to install custom roms again or am i doing it wrong now?

http://forum.xda-developers.com/showthread.php?t=1883465

Related

[Q] Issues of 4.1 stock recovery with 4.2 ROM?

Hello guys.. I would be grateful if any of you could help me with your thoughts regarding this matter...
For security reasons I prefer flashing stock recovery and locking down the boot loader after I settle on a custom rom/kernel combo. Been doing this for a while and I dont mind building my phone up from the scratch when I change ROM.
With CM 10.1 stable coming up.. I think I'll finally switch to 4.2 in a few weeks time. I read on the forums that the file system change in 4.2 doesn't play nice with 4.1 recoveries and ends up creating duplicate folders all over the place. Now... I'll surely use latest CWM or TWRP to flash CM 10.1 but later... when I flash the stock recovery (v3e, i think the latest for our device) just to lock down my device- is there any possibility that my system would get messed up? As the latest stock recovery for Nexus S was released with 4.1.2 it isn't supposed to be compatible with 4.2.2 roms technically.
..enlighten me please! with my little knowledge, i'm unable to work it out in my head

[Q] Custom recoveries with stock updates.

Hi,
Dudes I know some advantages of custom recoveries over stock recovery. It gives u freedom to flash any custom zip. I have a doubt, what if a stock software update zip is flashed with custom recoveries?. Can it be successfully flashed ??? If not, then what error will be thrown ???

[Q] Is there a guide to updating to KitKat from an older ROM of KitKat?

My dad's phone has a custom recovery and has a ROM of the version of KitKat before the OTA. Have ROMs been updated to support the official release yet? How do I know which ones are on the new or old drivers? Would it simply be to flash the ROM through the recovery, or do I have to go back and install the OTA, then flash a new recovery and ROM?
Thanks.

[Q] Custom ROMs won't boot

Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:

[Q] Help! Huawei U8800 Bootlooping on 2.3.5 Official Rom after many attempts to fix

Hey guys, I Know this phone is old but please help me
I was using official 2.3.5 ROM and it was getting old so I thought to root and install an ICS Rom so i rooted and installed MIUi ICS ROM (http://forum.xda-developers.com/showthread.php?t=2029969) it was really nice and i thought to install Aurora Rom(http://forum.xda-developers.com/showthread.php?t=1492957) and it was Awsome! so i got into installing new ROMs and i was installing new ROMs almost every week and one day i saw CM 11 KitKat ROM for Huawei U8800 and I wanted to install it but before that i had to install Ble-Part Partition (http://forum.xda-developers.com/showthread.php?t=2615712) i flashed it succesfully and i installed the 2.2 version after that i flashed CWM 6.0.4.6 and i installed KitKat CM11 without any problems!
After some time using it for some time i thought to go back to Aurora as CM 11 was a little buggy and Aurora was the most stable ROM but as i was installing Aurora, i accidently formatted Boot instead of formatting System and without realizing it i flashe Aurora which flashed very quickly rather unexpectedely, and when i rebooted a blue screen appeared. I (surprised) installed official 2.3.5 ROM via dload and when it had installed the phone went into bootloop and i performed a factory data reset and it booted normally. But when i rebooted the phone again again it went to bootloop again. So i installed official 2.2 ROM and it installed succesfully and it never bootlooped in 2.2 ROM. But i wanted to install Aurora but it needs a .35 kernel and whenever i install 2.3.5 it keeps on bootlooping and i cant root it, though i can root 2.2 ROM easily and install .32 ROMs but they are quite old and I want to install ICS, JellyBean or KitKat Rom, which unfortunately i cant
Just in case you would be wondering i have tried many methods to go back to stock partition and none of them works and i have 1.8 GB storage! I have read that distorted partition can cause bootloops on 2.3.5 ROM so if anyone can help me to fix this problem, ill be very grateful as this is a very important phone to me!
And if you have any questions please ask!

Categories

Resources