so i tried loading cm10 onto my phone... on clockworkmod it said the load was successfull. then when it restarted it was in a loop that kept displaying the multiple lg startup logos. so i took out the battery and started it again, to see the same thing happen. I tried putting it in recovery mode but that doesnt work either. I dont know what to do.
Related
I tried to load Velocity 0.4 for the 1st time on my ally with AllyRR and everything went swell, far as I could tell. Then i hit "reboot device" and BAM! Instant boot loop! Now I can't get into recovery-it gives me the ! sign with the little android guy every time. Computer wont recognize ally while it is boot looping. Have I bricked my phone??
Thanks guys for the help. I'm pretty new to flashing Androids, but I've done a ton of work on my Dell Axim (Windows Mobile 6.5) with Rom's and registry and such.
*Also: It gives me a little blue LED flash and the Verizon screen before rebooting. Odd.
I have the exact same problem and I have found no way to fix it. I have looked all over the interwebs. Anyone out there know how to solve this issue?
This might help:
ttp://androidforums.com/ally-all-things-root/257859-unbrick-lg-ally-updated-3-2-2011-a.html
Me to.
traxxasaddict said:
I tried to load Velocity 0.4 for the 1st time on my ally with AllyRR and everything went swell, far as I could tell. Then i hit "reboot device" and BAM! Instant boot loop! Now I can't get into recovery-it gives me the ! sign with the little android guy every time. Computer wont recognize ally while it is boot looping. Have I bricked my phone??
Thanks guys for the help. I'm pretty new to flashing Androids, but I've done a ton of work on my Dell Axim (Windows Mobile 6.5) with Rom's and registry and such.
*Also: It gives me a little blue LED flash and the Verizon screen before rebooting. Odd.
Click to expand...
Click to collapse
My LG Ally gets stuck on the Verizon logo and wont reboot into recovery. Instead of seeing a little green android guy It get stuck on a blue screen. The blue screen is my splash screen before the verizon logo comes up.
I was curious if anybody could help me. I have a g2x from Wind (p-999dw). I am pretty new to rooting and such but wanted to update my phone. I got it rooted successfully and then tried installing the CM7 Rom update. Backed up with cwm first and then continued. Now my phone is pretty f'd. Every time i try to turn it on it just hangs on the LG screen. I tried the flash recovery method with nv flash and was able to get a cwm recovery menu up but when i try loading the previous working setup, it says successful, i restart the phone and now i get the LG logo with the blue status bar below (which wasn't there before I used the flashing tool) it which moves for a few seconds, then freezes. I've tried every option in the menu and i still cant get past the LG logo screen. Can anybody help me? I've spent hours trying and can't seem find a way to fix it. Don't care if i lose all my data and apps just want my phone to work. Any help would be much appreciated. Thanks.
i just got this lg-c800g and i turned it off and now it wont boot up, i have got it to go into restore mode with the little box unpacking but then it stops and reboots then goes to LG screen and hangs and doesnt do anything after that.
i have tried all key combinations to get into recovery and nothing works at all so if anyone can help me that would be awesome iv been searching but there isnt much on the net about this phone
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
The_mamba said:
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
Click to expand...
Click to collapse
Pretty common prob plug it in to the wall charge see if it boots sometimes it still wont but most of the time it will the battery quality on the g3 is crap they last at most a year with a few exceptions i would first order a battery.
Hello
I am new to working on these phones so I apologize in advance if I don't properly state any processes or terms correctly.
I have a stock non modded Verizon LGG3 VS985 that experienced problems with WiFi and Bluetooth not working and significant battery drain. This happened right after a recent update to marshmallow. I tried cache clearing, safe mode, hard reset and nothing solved the problem. I decided I wanted to take the phone back to factory condition. I started with the LG flash tool that uses the .tot and a .dll. I ran the flash and when the program got to approx. 80%(at checking mini os phase of the flash) the phone began to reboot and only got as far as the LG logo and after about 2 min of the phone trying to reboot the flash program said fail, usb connect or something like that. At this point the phone will only start and go into a loop that includes the vibrate and the LG logo. and that will cycle until I believe the battery would die if allowed. I then found a link here at XDA (https://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140) that uses the KDZ method, was well written and easy to follow. I ran it on the phone and it was going great. The flash program got to 88% and the phone went into the boot loop with the vib and LG logo . The flash program continued to run until it was complete while the phone was in the boot loop and it got to 100% and said that the software installed. I powered down the phone via battery removal and now when it tries to boot it vibes, shows the lg log and then the green android symbol shows for about 2 seconds and then it does it all over again. I have tried a hard reset and nothing changes. I appreciate any ideas any of you may have on what I can try to get this resolved. Thank you.
Thread closed
Reposted here
https://forum.xda-developers.com/lg-g3/help/verizon-lgg3-vs985-booting-t3550589