I managed to get the Kernel extracted As Well AS the Full Odin Image......
This is for the ATT NOTE 2 ONLY...... to the xda-members do not try and flash this....... this is for development Only........ Pm me if you have any questions......
HERE IS THE FULL ODIN TAR IMAGE****
***** http://d-h.st/K8Q *****
Enclosed in this thread The-Kernel, The Modem,
Thanks
~ oka1
The kernel is here-
http://d-h.st/yiw
The Modem is here-
http://d-h.st/EK8
oka1 said:
I managed to get the Kernel extracted from the system dump.... here it is posted for your enjoyment
This is for the ATT NOTE 2 ONLY...... to the xda-members do not try and flash this....... this is for development Only........Developers only !!! Pm me if you have any questions...... Devs only......
Thanks
~ oka1
http://d-h.st/yiw
Click to expand...
Click to collapse
funny you post this I just received from my contact the kernel files wooo!
sextape said:
funny you post this I just received from my contact the kernel files wooo!
Click to expand...
Click to collapse
2 Minds with the same timing .... I like it.....:laugh:
niceeeeeee
Any devs planning on supporting the AT&T Note 2? No one seems to be biting, perhaps they just want to wait for official handset to be released and obtain the shipped code?
Daniel
Can I upload a Mirror for this? It will have a Download Counter for downloads
just flashed to my Tmo note, will fail flashing...
oka1 said:
I managed to get the Kernel extracted As Well AS the Full Odin Image......
This is for the ATT NOTE 2 ONLY...... to the xda-members do not try and flash this....... this is for development Only........ Pm me if you have any questions......
HERE IS THE FULL ODIN TAR IMAGE****
***** http://d-h.st/K8Q *****
Enclosed in this thread The-Kernel, The Modem,
Thanks
~ oka1
The kernel is here-
http://d-h.st/yiw
The Modem is here-
http://d-h.st/EK8
Click to expand...
Click to collapse
Hi oka1,
I just got my phone yesterday and installed a N7100 rom by mistake which overwrote the modem i am assuming from Android Revolution HD and needed to go back to AT&T stock rom. I would like to check if this is a working ODIN image of the AT&T Note 2 because I see that your post is dated for 18 Sep 2012 and the Note 2 for AT&T arriving just yesterday. Can you please confirm that this is a valid AT&T Note 2 ODIN image?
Anxiously waiting for your reply.
zedomax said:
just flashed to my Tmo note, will fail flashing...
Click to expand...
Click to collapse
heard if you remove md5 it will flash
rameshgk said:
Hi oka1,
I just got my phone yesterday and installed a N7100 rom by mistake which overwrote the modem i am assuming from Android Revolution HD and needed to go back to AT&T stock rom. I would like to check if this is a working ODIN image of the AT&T Note 2 because I see that your post is dated for 18 Sep 2012 and the Note 2 for AT&T arriving just yesterday. Can you please confirm that this is a valid AT&T Note 2 ODIN image?
Anxiously waiting for your reply.
Click to expand...
Click to collapse
Just thought of dropping by and leaving a thank you note as it is working for AT&T Note 2.
Can someone post an "About Device" screenshot to prove that this is correct? I don't want to take any chances.
munnarg said:
Can someone post an "About Device" screenshot to prove that this is correct? I don't want to take any chances.
Click to expand...
Click to collapse
it' the older build KL6, this tar is used to recovery your ATT note2 i317 phone when you brick it.
and why is this in n7100 forum and not in ATT i317 forum?
munnarg said:
Can someone post an "About Device" screenshot to prove that this is correct? I don't want to take any chances.
Click to expand...
Click to collapse
Please!
oka1 said:
I managed to get the Kernel extracted As Well AS the Full Odin Image......
This is for the ATT NOTE 2 ONLY...... to the xda-members do not try and flash this....... this is for development Only........ Pm me if you have any questions......
HERE IS THE FULL ODIN TAR IMAGE****
***** http://d-h.st/K8Q *****
Enclosed in this thread The-Kernel, The Modem,
Thanks
~ oka1
The kernel is here-
http://d-h.st/yiw
The Modem is here-
http://d-h.st/EK8
Click to expand...
Click to collapse
why this old thread deserve to be a sticky and one of the efs backup restore threads are not. It is important I guess because many people have the same problems and losing their imei etc...
just my observation
Related
So today I finally decided to root my GS3 that I never took any OTA updates on.
I'm on 4.0.4 rooted and unlocked bootloader using:
[GUIDE][VZW Edition]How to root your Galaxy SIII & More!(ROMs/CWM/Stock)
http://forum.xda-developers.com/showthread.php?t=1762709
I stopped at section 3.
When reading around the forums about getting a ROM with the latest OTA onto my phone and keeping root it seemed confusing.
For now I just want an updated stock ROM. How do I do this? Which is the right thread for me to follow?
( I was considering this Stock rooted VRBMB1 4.1.2- http://forum.xda-developers.com/show....php?t=2178482 )
Thanks!
ReFLeX135 said:
For now I just want an updated stock ROM. How do I do this? Which is the right thread for me to follow?
Click to expand...
Click to collapse
The link in your post doesn't work, but the thread no. 2178482 is the same as what I used to go to 4.1.2. You may also want to grab the 4.1.2 modem and rpm from post #3.
SempaiMatt said:
The link in your post doesn't work, but the thread no. 2178482 is the same as what I used to go to 4.1.2. You may also want to grab the 4.1.2 modem and rpm from post #3.
Click to expand...
Click to collapse
Thanks, I'll try to fix those links soon. Are you saying all I need to do is flash that 4.1.2 rom?
ReFLeX135 said:
Are you saying all I need to do is flash that 4.1.2 rom?
Click to expand...
Click to collapse
Backup first, and flash away.
Q&A for [FIRMWARE] <I535VRUCML1> (MODEM/RPM/TZ/SBL) Verizon SGS3 (SCH-I535)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [FIRMWARE] <I535VRUCML1> (MODEM/RPM/TZ/SBL) Verizon SGS3 (SCH-I535). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
modem link not working 2nd link ive found that wont download help?
invisiblek said:
No, I do not have a full I535VRUCML1 firmware package for you.
Yes, I somewhat lied in the title of this thread. But I did it for a good reason: to get your attention.
Mods - I'm sure you'll understand.
You should NOT flash the I535VRUCML1 firmware (or any subsequent releases for that matter). You will brick. This is what vzw/samsung did on the first OTA for the Galaxy S4. They changed the keys they sign the firmware with. This prevents us from 'mis-matching' our firmware like we've been doing all along. We've been leaving aboot (VRUAME6, the african-canadian sock-monkey leaked bootloader) alone and updating everything else. Since they're signing with different keys now, doing this will brick your device. If you update the ENTIRE bootchain (including aboot) you shouldn't brick, but will be stuck with a locked bootloader and any attempt to downgrade (via dd, etc) will brick you as well. Even if you manage to flash an ENTIRE old bootchain over VRUCML1, you'll brick because they trip a qfuse that prevents it from working. More info about qfuse by djrbliss here: http://t.co/myb0LIrN6e
Just stick with VRUBMF1, trust me.
These firmware updates have, up until now, consisted of several partitions that we update:
- tz (trustzone)
- rpm (resource/power management)
- sbl[1,2,3] (secure bootloaders)
- NON-HLOS (modem/baseband)
Due to the way Samsung and Verizon have chosen to proceed with future updates (following what they do for the Galaxy S4) we cannot flash all these partitions anymore (see above) and retain our unlocked bootloader. We CAN, however, update the baseband as it's not signed.
My recommendation: if you aren't already on MF1 firmware (below), flash that. Then update your baseband with this: http://invisiblek.org/sch-i535/modems/d2vzw_ML1_modem.zip
Latest firmware (aka AIO) linked here: http://invisiblek.org/d2firmware.html
Find all firmware (aka AIO) packages here: http://invisiblek.org/sch-i535/firmware/
Click to expand...
Click to collapse
plz give me a mirrior for the modem link 2nd link ive found for this ml1 modem and times out after clicking it i relize this is old info maybe this is why its went bad..ut updated link would be great thanks in advance
Removed
Flash d2vzw_VRBMF1_firmware.zip over I535VRUCML1?
I am on CleanRom 8.2 with Baseband I535VRUCML1. When I updated to this from CR 6.2 my phone reception took a hit - I'm in mountainous outlying areas, so I notice right away areas that drop calls that didn't before.
I'd like to try a different modem but am confused which files are safe to flash. The only valid links I've found is invisiblek's at .../firmware/d2/. Can I flash d2vzw_VRBMF1_firmware.zip to try the MF1 modem without bricking? If I try it and want to get back to ML1, would the d2vzw_ML1_modem.zip get me there? The difference between "firmware" and "modem" in the file names worry me -as well as the d2 in the name - Are the d2 files also for the I535 Verizon models?
Other options? I also see a d2vzw_NE1.zip. I haven't read anything about an NE1 modem. Thanks for your help.
Hey,
New to xda-developers, so I apologize in advance if this post is in the wrong place. I am looking to upgrade my modem (I think I'm on the MF1 currently, and I'm having GPS issues). The link on the first page to the ML1 modem is broken for me, and I was wondering if anyone could link me to a copy of the ML1 and/or any of the newer ones. The only other ML1 modem I've found so far (http://forum.xda-developers.com/showthread.php?t=2591895) fails the zip signature verification when I try to flash it, and I'm hesitant to skip the zip verification to try to flash (it matches the md5 from the download page I got if from, however).
Thanks in advance.
zalincognito said:
Hey,
New to xda-developers, so I apologize in advance if this post is in the wrong place. I am looking to upgrade my modem (I think I'm on the MF1 currently, and I'm having GPS issues). The link on the first page to the ML1 modem is broken for me, and I was wondering if anyone could link me to a copy of the ML1 and/or any of the newer ones. The only other ML1 modem I've found so far (http://forum.xda-developers.com/showthread.php?t=2591895) fails the zip signature verification when I try to flash it, and I'm hesitant to skip the zip verification to try to flash (it matches the md5 from the download page I got if from, however).
Thanks in advance.
Click to expand...
Click to collapse
I have both the ML1 and NE1 modems. Let me know if you want one or the other or even both
Sent from my N5
ShapesBlue said:
I have both the ML1 and NE1 modems. Let me know if you want one or the other or even both
Sent from my N5
Click to expand...
Click to collapse
I think I have it all sorted out. I ended up reverting to an earlier snapshot of CM11 and my GPS seems to be working again. Thanks for offering, though.
Need ML1 modem
I'm currently running CleanROM 7 with the MF1 modem. I've tinkered with too much and need to reinstall. I'd like to try Alliance or another 4.3 ROM, but I need the ML1 modem to do so. The link to the ML1 at invisiblek's site hasn't worked for some time. Does anyone have a zip of the ML1 modem that I can install via TWRP?
Thanks.
jstaymi said:
I'm currently running CleanROM 7 with the MF1 modem. I've tinkered with too much and need to reinstall. I'd like to try Alliance or another 4.3 ROM, but I need the ML1 modem to do so. The link to the ML1 at invisiblek's site hasn't worked for some time. Does anyone have a zip of the ML1 modem that I can install via TWRP?
Thanks.
Click to expand...
Click to collapse
I sure do. I'll send you a PM with the link. Change that I can't send you a PM apparently
Sent from my Nexus 5
ShapesBlue said:
I sure do. I'll send you a PM with the link. Change that I can't send you a PM apparently
Sent from my Nexus 5
Click to expand...
Click to collapse
Sorry 'bout that. I missed a request to update my email. It's fixed now. Any chance I could get that link to the ML1 modem?
jstaymi said:
Sorry 'bout that. I missed a request to update my email. It's fixed now. Any chance I could get that link to the ML1 modem?
Click to expand...
Click to collapse
Yea no problem, will send a PM with the link
Sent from my Nexus 5
Does anyone have the ne1 modem zip?
If so, please post a link or pm it. I cant get to invisiblek.org (times out)
Thanks
spankiej said:
Does anyone have the ne1 modem zip?
If so, please post a link or pm it. I cant get to invisiblek.org (times out)
Thanks
Click to expand...
Click to collapse
Yup sure do. Will pm a link
Sent from my N5
Thankyou so much
Can I get to , the NE1 modem link
Thanks
adearinn said:
Can I get to , the NE1 modem link
Thanks
Click to expand...
Click to collapse
No problem, pm on the way
Sent from my Nexus 5
Can someone please point me to a modem download MF1 that isn't outdated. I've gone to links but they're not there. Thanks
http://forum.xda-developers.com/showthread.php?t=1734949
landshark68 said:
http://forum.xda-developers.com/showthread.php?t=1734949
Click to expand...
Click to collapse
Reason for me asking for MF1 modem is that I updated to jelly bean 18 which now my phone has the 4.1.2 MF1 firmware but my build version still remains I535YUDNE1. Phone is working great as is. But shouldn't the build version modem match the firmware? This is were my knowledge is lacking. I know the old saying " If it ain't broke don't fix it " Is this what you're saying in your reply? BTW Thanks
H779 said:
Reason for me asking for MF1 modem is that I updated to jelly bean 18 which now my phone has the 4.1.2 MF1 firmware but my build version still remains I535YUDNE1. Phone is working great as is. But shouldn't the build version modem match the firmware? This is were my knowledge is lacking. I know the old saying " If it ain't broke don't fix it " Is this what you're saying in your reply? BTW Thanks
Click to expand...
Click to collapse
No what he's saying is before you post be sure to search first. Duplicate threads are posted numerous times. This is a thread for the general or Q&A section
Sent from my Nexus 6
Hi I see that theirs no Galaxy j3 prime forum on Xda yet so I thought it will be okay to post the Stock Firmware of the latest Galaxy j3 Prime
from MetroPCS (NOT TMobile) I wouldn't recommend trying lol.
Model: SM-j327t1
Galaxy j3 Prime Metro Variant
OS: 7.0
Use the latest Odin 3.10 +
UPDATE: 7/21/2017
New Stock ROm version
(OLD) Build Number: J327T1UVU1AQCB
(NEW) Build Number J327T1UVU1AQF7
New Download link http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy+J3+Prime+http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy_J3_Prime_J327T1UVU1AQF7.rar
Can you root and twrp the j327t1 on 7.0?
iSinsemilla said:
Can you root and twrp the j327t1 on 7.0?
Click to expand...
Click to collapse
So far from what I see nothing
Nightflow said:
So far from what I see nothing
Click to expand...
Click to collapse
Dang, yea I've been searching everywhere everyday since I got mine. Thanks for the stock Rom though that came in handy. I almost lost my original recovery trying to flash a different J3 twrp
try using srsroot i found a post on the official twitter of srsroot and it says this device is supported. i haven't tried it yet. also thanks nightflow for uploading the rom for the phone it will be useful if i accidentally brick it.
srsroot is a failure. turns out that root method is a fake.
I don't trust one-click-roots either way. maybe in a couple more months...
Help?
I see that there is a bl, ap, cp, csc, and a home_csc within the zip. Do i apply all except home_csc or just ap, sorry not sure what to do with 5 md5 files :/ (I am using odin, and wondering which do i apply)
Thanks I bricked smj 327p.
DarksithlordLev said:
Thanks I bricked smj 327p.
Click to expand...
Click to collapse
There's a stock rom you can flash in ODIN
DarksithlordLev said:
Thanks I bricked smj 327p.
Click to expand...
Click to collapse
i dont know why you are trying to attempt to flash a stock rom that isnt supporting your (Boost mobile) j3 when this is a MetroPCS only
Hi
Maybe you have the j320AUCU2AQC1 firmware for the J320A (AT&T) ? I'll be very grateful!
Thanks @Nightflow
metropcs has released a new update for the j3 prime today.
link:https://www.sammobile.com/firmwares/galaxy-j3-prime/SM-J327T1/TMK/download/J327T1UVU1AQF7/177641/
Flaming Burrito said:
I see that there is a bl, ap, cp, csc, and a home_csc within the zip. Do i apply all except home_csc or just ap, sorry not sure what to do with 5 md5 files :/ (I am using odin, and wondering which do i apply)
Click to expand...
Click to collapse
sorry it took so long to reply, you need to use all of them except home_csc. this only works on the j3 prime for metropcs
Nightflow said:
Hi I see that theirs no Galaxy j3 prime forum on Xda yet so I thought it will be okay to post the Stock Firmware of the latest Galaxy j3 Prime
from MetroPCS (NOT TMobile) I wouldn't recommend trying lol.
Model: SM-j327t1
Galaxy j3 Prime Metro Variant
OS: 7.0
Use the latest Odin 3.10 +
UPDATE: 7/21/2017
New Stock ROm version
(OLD) Build Number: J327T1UVU1AQCB
(NEW) Build Number J327T1UVU1AQF7
New Download link http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy+J3+Prime+http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy_J3_Prime_J327T1UVU1AQF7.rar
Click to expand...
Click to collapse
i swear every time i try to download the file it gets close to finishing and quits with a minute left which is corrupted and stuff. my internet is fine but this is a problem with mediafire. Try uploading this file to a google drive and making the link public.
Can this be ported to j320f?(j3 2016)
Nightflow said:
Hi I see that theirs no Galaxy j3 prime forum on Xda yet so I thought it will be okay to post the Stock Firmware of the latest Galaxy j3 Prime
from MetroPCS (NOT TMobile) I wouldn't recommend trying lol.
Model: SM-j327t1
Galaxy j3 Prime Metro Variant
OS: 7.0
Use the latest Odin 3.10 +
UPDATE: 7/21/2017
New Stock ROm version
(OLD) Build Number: J327T1UVU1AQCB
(NEW) Build Number J327T1UVU1AQF7
New Download link http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy+J3+Prime+http://www.mediafire.com/file/3patrl2ufapcg1b/Galaxy_J3_Prime_J327T1UVU1AQF7.rar
Click to expand...
Click to collapse
Hi guys, willit works on SM-327p from Boost Mobile?
Sorry I read about some bricked phone....
overthc said:
Hi guys, willit works on SM-327p from Boost Mobile?
Sorry I read about some bricked phone....
Click to expand...
Click to collapse
No it wont work on a boost variant it will brickkk
Nightflow said:
i dont know why you are trying to attempt to flash a stock rom that isnt supporting your (Boost mobile) j3 when this is a MetroPCS only
Click to expand...
Click to collapse
I have both varients
---------- Post added at 01:22 AM ---------- Previous post was at 01:22 AM ----------
DarksithlordLev said:
I have both varients
Click to expand...
Click to collapse
Thank you
---------- Post added at 01:29 AM ---------- Previous post was at 01:22 AM ----------
Nightflow said:
So far from what I see nothing
Click to expand...
Click to collapse
Yes I haven't seen anything.
---------- Post added at 01:31 AM ---------- Previous post was at 01:29 AM ----------
Mikizio said:
Hi
Maybe you have the j320AUCU2AQC1 firmware for the J320A (AT&T) ? I'll be very grateful!
Thanks @Nightflow
Click to expand...
Click to collapse
No I dont
---------- Post added at 01:43 AM ---------- Previous post was at 01:31 AM ----------
Mikizio said:
Hi
Maybe you have the j320AUCU2AQC1 firmware for the J320A (AT&T) ? I'll be very grateful!
Thanks @Nightflow
Click to expand...
Click to collapse
No I dont
Can i use this to bypass Frp?
i've tried everything and nothing works
Has any one bin able to get a download of the latest firmware for the Galaxy J727P ? build number J727PVPU3AQJ3 if so can you upload it to Mega an post a download link ? thank you !!
https://www.androidfilehost.com/?w=files&flid=238400
virgin mobole Galaxy J727P
RS.85243 said:
https://www.androidfilehost.com/?w=files&flid=232519
Click to expand...
Click to collapse
Thank you so much for your firmware download link !! you are the best !!!
Thanks for this my friend!
RS.85243 said:
https://www.androidfilehost.com/?w=files&flid=232519
Click to expand...
Click to collapse
We appreciate that you provide us with this download link for us who might accidentally brick our phones on the current firmware. You are a god send. Thanks very much!
Thanks!!!
I've lurked these forums for years, but just registered to say thank you! I just got and bricked the phone 2 days ago and had tried everything to get it going again, but nothing worked until I flashed this firmware. THANK YOU!!
Do we need to download all of the files or just the 1.3 gig file and transfer with Odin? Thanks!
Virgin mobile Galaxy j727P
uk.harris said:
Do we need to download all of the files or just the 1.3 gig file and transfer with Odin? Thanks!
Click to expand...
Click to collapse
Yes 4 files the Ap, Bl ,CP, CSC, files !
I don't have this exact phone but, I was wanting to say thanks for the assistance u give people like us. We do deeply appreciate all u guys do...:good: