[Q] NFS Shift accelerometer problem with my GALAXY SL i9003 - Samsung Galaxy SL i9003

hello GUYSS!!
I am using galaxy sl i9003 with cfw of dhiru named slim cm9.
I recently inslalled nfs shift .Game runs correctly but while playing it steering stuck to right and accelerometer doesnt work perfectly.
I have to rotate my phone above 180 degree to make the car just straight.It cant be turn on left.
I tried all method found on GOOGLE.But nothing works.So Please anyone knows what to do then tell me.THANX IN ADVANCE

Problem with the game, same with GTA.
Other games (temple run) will use it properly.

No. I experienced this but mine in stock. I TELL YOU IT HAS SOMETHING TO DO WITH THE CALIBRATOR. I think there is no calibrator settings in ics? The one with dart like target in the middle.

It occurred to me too
Sent from my GT-I9003 using xda premium

Check if the problem is the app or a miscalibrated sensor: Bubble level should be ok (tested on CM10)
After that, if the app is not working correctly, try this:
Put the phone on a flat surface, screen upwards.
With terminal emulator/adb, run the following commands (I don't know if there are other methods):
Code:
su
echo 1 > /sys/class/sensors/accelerometer_sensor/calibration
I don't know how is possible to miscalibrate the sensor other than running that command with the phone in the wrong position.

Related

Multitouch problem

Hi!
I recently bought an O3D and I'm getting some multi-touch problems.
As you can see, when you tap 3 times with another finger already tapping, multi-touch goes totally wrong. This happens after unlock/lock screen sometimes, and if you tap 3 times again the problem disappears.
Video from other user.
Kernel problem? Is there any solution? This makes playing multi-touch games (Nova for example) really anoying or zooming in browser with two fingers.
So sad to see the behavior of your touch screen, cause when I do the same test on my O3D it recognize 8 fingers without any problems. Are you rooted? Did you try for example my ROM to see if it makes any difference?
Sent from my amazing LG O3D using ThiaiZO3D V2.4
ThiaiZ said:
So sad to see the behavior of your touch screen, cause when I do the same test on my O3D it recognize 8 fingers without any problems. Are you rooted? Did you try for example my ROM to see if it makes any difference?
Sent from my amazing LG O3D using ThiaiZO3D V2.4
Click to expand...
Click to collapse
Mine recognizes up to 10, but when this happens only recognizes one at time. If you tap three times the problem is gone until you tap 3 times again.
I've tried with custom roms (one of them is yours), rooted, etc.
i confirm the problem...but the games looks not to be affected by it...they works perfectly.Only with touch test i have the problem...very strange and i have your rom thiaiZ...any other experice of it?
I have the same problem...
I'm on CM7 nightly 32 (for the P925 because of the Baseband problems)
but it is a bit strange.. sometimes it works and sometimes it doesnt, i don't know why
I have similar problem.
When I play a game the touch screen with 1 finger is okay but when I play with 2 fingers it stops to recognize the both fingers.
So I have to walk and then stop and then aim and then fire which sucks.
I have the same problem. Is this problem related with hardware?
hi everyone,
i tested this too and i noticed a certain pattern. If i turn off my phone and then turn it on and then run the multitouch tester i will get the issue you described. However if i turn it off and then turn it on and then move my finger from the left of the screen to the right of the screen 3 times(on the homescreen) and then I run the multitouch tester the issue is gone and the touch screen works perfect afterwards. Its a very weird bug. can someone confirm this on their phone also. If a programmer can develop an app that imitates 3 swipes when the phone unlocks then this annoyance is fixed.
Multitouch problem-any permament solution?
Have anyone found a permament solution?The thing is annoying.Has anyone got hardware fixing solution to this problem?Maybe the flat cable (placed at power button)?I've noticed it after 5 months of use.I haven't tried it myself with any other optimus 3d device.Could anyone confirm not having a problem?Btw, I use 2.35 official, without root or any kind of mod.Please, help.
rgunara said:
hi everyone,
(...)However if i turn it off and then turn it on and then move my finger from the left of the screen to the right of the screen 3 times(on the homescreen) and then I run the multitouch tester the issue is gone and the touch screen works perfect afterwards. (...)
Click to expand...
Click to collapse
Yeah, I've noticed this problem too and your three swipe solution seems to work fine. I also realised that I don't need to be on the home screen for this to work. I swiped on the tester screen itself and multitouch resumes working.
Testing with Antutu Tester I can get 10 simultaneous touches. The hard thing is to make 10 fingers fit into the screen
Sent from my LG-P920H using xda app-developers app

[Q] Crystal Defenders on CM9 issues?

Hey just bought Crystal Defenders on my R800x, while it works and all. Seen some issues. 1: Touch screen isnt accurate (I will however assume its a poor port to android)
2: Sometimes when the screen goes in standby or you put it there, seems to close the game out and doesnt save your progress?
3: Seems when I was at the title screen and plugged in my charger. The system locked out. By that I mean music played, but nothing responded, HOWEVER adb via usb did respond (which is how I made my phone reboot)
Anyone else having issues with this game? Is it the game itself or is it some issue with CM9 or ICS?

[Q] Gyroscope calibration

I have the N8000 tablet with the latest official firmware (4.1.2)...
I noticed that the gyroscope is not working correctly (in racing games, the car keeps turning to the left). I tried to calibrate it like on my Note 2, but the option is missing from Motion/Advanced settings.
Does anyone know if there is there any way to calibrate the gyroscope on the Note 10.1 (maybe a hidden setting, a third party app)?
Thanks.
Try GPS Status via Play.
jje
Sent from my GT-N8010 using xda premium
galaxy note 10.1 gyroscope issue
I have a galaxy note n8000 with official os 4.1.2....
I got a problem that in some games when I tilt my tab left, the result is reciprocal of the desire as the object starts moving rightward, n the same is the case with tilting movement to right.
Would anybody help me to fix the problem of having opposite results than what I m upto.

[Q] Skyrocket Orientation sensor issues

In my Galaxy S2 skyrocket I think that the orientation is not all right. When I play games like NFS Shift, Asphalt 7 or Temple Run, the character in Temple Run and the Cars in Asphalt 7 always turn left even when my phone is straight.
I use this code *#0*# and check sensor> accelerometer> image test and it gives these results when I hold my phone horizontally and straight (not slanted):
x=0-3, y=40-46, z=50-51
(Even my auto-screen rotation does not work properly.)
I calibrated the gyroscope sensor, but it did not solve my problem.
What should I do?
Fixed?
tito07dr said:
In my Galaxy S2 skyrocket I think that the orientation is not all right. When I play games like NFS Shift, Asphalt 7 or Temple Run, the character in Temple Run and the Cars in Asphalt 7 always turn left even when my phone is straight.
I use this code *#0*# and check sensor> accelerometer> image test and it gives these results when I hold my phone horizontally and straight (not slanted):
x=0-3, y=40-46, z=50-51
(Even my auto-screen rotation does not work properly.)
I calibrated the gyroscope sensor, but it did not solve my problem.
What should I do?
Click to expand...
Click to collapse
Hey man have the same problem did you get it fixed??
carddude said:
Hey man have the same problem did you get it fixed??
Click to expand...
Click to collapse
No bro.

gyro or tilt sensor not properly working

im using galaxy s advance i9070
in my phone when i wanted to play temple run 2 the charecter goes extreme right all the time(screenshot attached)
and my auto rotation is also not working properly and the camera interface also
how can fix that
is it a hardware problem?
im running on stock jellybean rooted

Categories

Resources