Database Info

[q] phone stuck in hboot with nothing else!!

hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!

yuzhi92 said:
hey, my phone is spoilt and im in desperate help of somebody who can help me with my HTC Sensation XE w Audio Beats.
This is what happened,
i was trying to root my phone with help from hansoon all in one toolkit, after unlocking the device and trying my best to install recovery it comes to no avail, had been receiving error when tryng to install / flash pg58img from hboot ( model id incorrect ) . later after i accidentally click on flash kernel and my phone restarted on its own and got stuck in hboot thereafter. I don't have recovery, no USB debugging mode for me to superCID and ive search the whole entire forum for a cure.. i really wish somebody would help me out here as i really want to get my only phone working and running.
UNLOCKED
pyramid pvt ship s-on rl
hboot. 1.27.0000
emmc-boot
thats all i have, i apprieciate anybody who is willing to help me thank you so much!
Click to expand...
Click to collapse
Go to fastboot on your device
Connect it to pc (usb debugging enable is not required) (phone reads fastboot usb)
Then go to your adb folder on pc
And Type this
fastboot getvar all
Post the complete output except imei and serial number
I'll guide you through the process after this
Sent from my pyramid.. Through blazing fast sonic waves

Just download the latest RUU for your device and run it

Yeah do that lol u can get ur ruu from file factory
Sent from my HTC One S using xda premium

[SOLVED] OP's problem was solved on the irc over 5 hours ago.

Stuck in the same boot loop with my htc sensation
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s

reresp same
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already

xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
What is the last rom you had?
You can still go to bootloader thus you can go to recovery...
So enter recovery and tell me whether you are able to e ter or not
Sent from my pyramid.. Through blazing fast sonic waves

w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
You mean you succesfully flashed RUU and still can't boot?
Sent from my pyramid.. Through blazing fast sonic waves

xenonxeno said:
i just tried to flash my htc sensation xe for the first time, i successfully did S-OFF using the revolutionary tool and then tried to install ClockworkMod Recovery from PG58IMG.zip which succeeded,
but i havent been able to boot up the device since doing that. its stuck on the htc logo. kindly help.
this is what i get on doing c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.27.1100
INFOversion-baseband: N/A
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.32.401.5
INFOserialno: SH1AJV804923
INFOimei: 358313047099531
INFOproduct: pyramid
INFOplatform: HBOOT-8260
INFOmodelid: PG5813001
INFOcidnum: HTC__038
INFObattery-status: good
INFObattery-voltage: 3811mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 617f0a98
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.499s
Click to expand...
Click to collapse
Flash an ICS ROM. Your GB ROM will not boot on 3.32 firmware.
---------- Post added at 11:28 AM ---------- Previous post was at 11:26 AM ----------
w00dberry said:
im having a similar problem - does anyone know what the solution was
edit: pretty much the same thing
stuck with the fastboot/cwr but can't get anything else to work
tried multiple RUU already
Click to expand...
Click to collapse
I need a better description of the problem.
"It doesn't work" "I tried multiple RUUs" are useless to me.
What happens when you flash the RUU? Is it successful?

Emergency, need proper RUU for One S Ville/s4

hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days

hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei: 352103050279088
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
First of all, remove serial number and imei.
There's no Jelly Bean RUU for Rogers instead you can download OTA.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:

hogol said:
first
i can't figure out how to edit my original post
second
i tried looking, i really am not sure which ota ruu i need, hence the thread
it would be kind of you to help me find it please :fingers-crossed:
Click to expand...
Click to collapse
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165

khan.orak said:
- There's option at the bottom of your first post to Edit it. Your serial/IMEI can be used for dangerous purposes.
- Refer to This Post to find the correct OTA.zip.
- To install the OTA.zip, there are a few steps to be done. What was the last ROM you installed? Did you update to JellyBean via OTA?
use this guide http://forum.xda-developers.com/showthread.php?t=2394165
Click to expand...
Click to collapse
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?

hogol said:
The last rom i had was 4.1.1 stock, and currently i have no rom installed, where the entire problem started
can i flash an OTA on a phone which has no rom?
plus i have downloaded this
OTA_Ville_U_JB_45_S_Rogers_WWE_3.16.631.8_1.11.50.05.28_10.27.50.08L_release_301897nn5lu23br8cg9q7l.zip
but i don't know how to install a zip to a phone with no rom -_-
and there are many rogers ota/ruu available
which one is for my phone?
Click to expand...
Click to collapse
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
I have given the Rogers OTA in the above list refer to that.
That's the core RUU you have downloaded
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc

hogol said:
so i install the core ruu then the ota?
or the ota then the ruu?
and which ota do i need?
quite a few....
sorry for all the noob questions, my first time working with a htc
Click to expand...
Click to collapse
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
Sorry for my weird typos. I was half asleep while I was typing that. I realized it now.
That's the correct OTA you download. It is in the form of a zip file correct?
You can flash that OTA with the help of the method stated in my signature
..
Edit:
Lol man I can't stop laughing at my typos. And the subsequent question asked by you hahaha
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening

hogol said:
well followed your tut through fully
and now after step 14, my phone wont boot, not at all
my phone had no OS installed, the recovery was stock
and i flashed the firmware.zip, now the phone wont even boot, and it my pc detects it as an alcatel device :|
i have no idea whats happening
Click to expand...
Click to collapse
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD

many mpurnm
khan.orak said:
Can you go into bootloader/fastboot?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:

hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
hogol said:
nope, thats the problem
i would have continued following the tut if it booted into bootloader
its not responding at all :crying:
Click to expand...
Click to collapse
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
Click to expand...
Click to collapse
yes done it twice
thing is
after it said done in command prompt, the green progressbar wouldn't leave, i mean it was stuck at the green progress bar
the thing is, i waited for a while for it to finish, a lil bit was left at the end in the progressbar, but it said done in command prompt
so after a lot of waiting, i just hard reset it, but after that the phone is not booting into bootloader and not responding at all
what is happening?

khan.orak said:
no light blinks or anything?
Did you flash the firmware twice? at first it usually gives error.
---------- Post added at 02:36 PM ---------- Previous post was at 02:34 PM ----------
But this method has worked for many people. Two of them reported yesterday.
at 10th step I had already given that you shouldn't flash firmware if you had already updated to jellybean.
But I seriously am think what could have could have caused the brick as the OTA matches with your firmware.
Did you do SuperCID?
Try VolDown+Power Button to go into bootloader.
Click to expand...
Click to collapse
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is

hogol said:
i had jellybean 4.1.1 before but after rooting i tried installing a custom rom, but that failed and it left me with no OS on the phone at the end of it
hence i wanted to go back to stock
and no i didn't do superCID, dont even know what that is
Click to expand...
Click to collapse
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.

khan.orak said:
Bro I can't find anything that you did incorrectly. I don't know what the problem is. But I think that incomplete firmware update bricked it.
Click to expand...
Click to collapse
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??

hogol said:
but it said done in command prompt, and i waited for so long for it to finish, but it never finished
anything i can do to fix this??
Click to expand...
Click to collapse
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.

khan.orak said:
Unless it turns on, there's nothing much we can do with it.
You can use this thread however http://forum.xda-developers.com/showthread.php?t=2116062
He unbricks HTC One S.
Click to expand...
Click to collapse
cant believe this is happening to me
phone wont even respond to charging, absolutely nothing...
i dont know what to do now :crying:

ota/ruu
hogol said:
hey guys my first thread, and ill be begging for help -_-
so i rooted my htc one s ville s4( model pj40110) and after that i tried flashing a custom rom, and i soft bricked it
now it only boots up to hboot, i tried installing custom recovery and installing other roms as it was rooted, but nothing worked
well i know how to revert it to stock, but i for got to get the S-On to S-Off and now i can't find the specific ruu for my device
looked for a week, now i resort to help
please kindly help me through this, its an emergency
im posting my getvar data here
C:\Users\Lance\Downloads\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.11.50.05.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT251W422764
(bootloader) imei:
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4011000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3977mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
my hboot is 2.15.0000
radio is 1.11.50.05.28
and if you need my version-main, every time i input fastboot getvar version-main, nothing shows,
it just shows version-main : (blank)
please guys do help me, its a friend's phone and he is leaving abroad in a few days
Click to expand...
Click to collapse
this is where i found what vi needed http://androidruu.com/?developer=Ville

[Q]Odexed stock ROM - 1.22.401.1 + OTA

Hello
I have an HTC one mini, unlocked and rooted.
Unfortunately I don't get to it, to install the OTA.
I've tried the two ROMs
Odexed stock ROM - 1.22.401.1
Deodexed stock ROM - 1.22.401.1
both of JMZ.
That works with the deodexed no OTA, was already aware, but now everything I've tried to install the odexed OTA.
It will me displayed constantly, that there is an OTA.
But when I flash the stock recovery, relock bootloader and the OTA update, start it starts in the recovery, where after a short time, a red exclamation mark appears.
Can someone help me?
My Bootloader:
*** UNLOCKED ***
M4_UL PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.19.0000
RADIO-1.19.40d.00.14
OpenDSP-v13.2.0268.0620
OS-1.32.502.3
P.S excuse me my bad English

you cant OTA with a unlocked bootloader as far as i know

correct - you have to revert your phone back to stock in order to receive an update. Simply wait for the latest version to be made into a flash-able ROM on xda.

PuffDaddy_d said:
correct - you have to revert your phone back to stock in order to receive an update. Simply wait for the latest version to be made into a flash-able ROM on xda.
Click to expand...
Click to collapse
i use a rooted Stock odexed ROM from JMZ and stock recovery 1.31.401.1
But if i start the OTA is comes first h**p://cdn.androidpolice.com/wp-content/uploads/2010/07/IMAG0014.jpg but ca. 30 sec later h**p://imageshack.us/a/img547/5011/recovery.jpg (photos are not mine)

Hi Guys,
i have bought as second hand used an htc one mini. I live in Italy, so no Us.
The device report the following info, made by the previous owner:
TAMPERED
RELOCKED
M4_UL PVT S-OFF RL
CID-VODAP102
HBOOT-2.19.0000
RADIO 1.20.40d.00.05
It has TWRP recovery and Android 4.2.2.
I would like to restock it, deleting "tampered" and "relocked"
anybody that can help me please? thank you in advance
C:\ADB-FASTBOOT>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.19.0000
(bootloader) version-baseband: 1.20.40d.00.05
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.31.161.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT386W**********
(bootloader) imei: 35**************
(bootloader) meid:
(bootloader) product: m4_ul
(bootloader) platform: HBOOT-8930
(bootloader) modelid: PO5820000
(bootloader) cidnum: VODAP102
(bootloader) battery-status: good
(bootloader) battery-voltage: 4232mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-99c875bb7f
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.100s

If the phone was s-off'ed using revone you can use a command to remove the tapered flag. not sure sure about the relocked flag though. But this has all been discussed before. Search Google "revone" and XDA HTC One mini for s-off threads. It's all there.
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
If the phone was s-off'ed using revone you can use a command to remove the tapered flag. not sure sure about the relocked flag though. But this has all been discussed before. Search Google "revone" and XDA HTC One mini for s-off threads. It's all there.
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I don't know how was s-offed ... i bought it as used .... any interesting suggestion to see how was s-offed?

Stefano Pech said:
I don't know how was s-offed ... i bought it as used .... any interesting suggestion to see how was s-offed?
Click to expand...
Click to collapse
Check one of the revone guides on here. There is a file you copy to your phones data folder on your root. Read the revone installation guide and see if the files from the guide were previously copied to your phone. If they are already there, then you should be using revone, if the previous user hasn't wiped the phone clean before selling it.
Else reinstall revone and use the commands provided in guide to remove the offending flags. Again not sure you can change the "relocked" flag.
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
Check one of the revone guides on here. There is a file you copy to your phones data folder on your root. Read the revone installation guide and see if the files from the guide were previously copied to your phone. If they are already there, then you should be using revone, if the previous user hasn't wiped the phone clean before selling it.
Else reinstall revone and use the commands provided in guide to remove the offending flags. Again not sure you can change the "relocked" flag.
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
ok...thank you. i will let you know how it goes

[Q] Newbie stuck , would love some help guys

Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
htc android phone update rom utility 1.04 2011
error 140 bootloader version error
Click to expand...
Click to collapse
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
TAMPERED
UNLOCKED
VLE PVT SHIP ON RL
HBOOT -2 .15.0000
RADIO -1.15.50.05.29
OPENDSP - V31.1.0.45.0815
EMMC -BOOT
DEC 14 2012. 17:10:57-1
Click to expand...
Click to collapse
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000
(bootloader) version-baseband: 1.15.50.05.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT23SW403509
(bootloader) imei: 359901041141397
(bootloader) product: vle
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ4010000
(bootloader) cidnum: VODAP001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3944mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-64bedd38
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.067s
C:\fastboot>
Click to expand...
Click to collapse
Thanks for taking the time to read this , hope someone can put me out of my misery.

mitch127 said:
Hello Lads
Sorry to trouble you but ive read and read and tried and tried various options but no luck. I was up till two this morning and have been on this all day when I was supposed to be out with the wife. Shes not a happy bunny.
Got an HTC ONE S here on Vodafone, I can get into Bootloader and custom recovery twrp-2.7.1.0a-ville.img
but I cant load any image nothing, The phone wont boot and keeps restarting in a boot loop. I've tried various options and nothing.
I have reflashed stock recovery and tried to put a vodafone ruu on but I keep getting an error
All I want to do is put a stock vodafone rom back on this phone but teh three ive tried give the same error
I thin I have to flash stock recovery
Then relock Bootloader through fastboot
Then run RUU while phone is in fastboot USB
Is this correct and can anyone point me to the correct RUU
details are
Thanks for taking the time to read this , hope someone can put me out of my misery.
Click to expand...
Click to collapse
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app

YoungDev said:
Try getting the ICS RUU instead of straight up JB then from there update to JB. Worth a try, hope this helps!
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks for replying to my question Pal.
I've managed to figure out how to unlock, root, get SuperCid, relock, get another unlock token and then eventually get S_ OFF,, which wouldn't work until I relocked then unlocked again with a new bin file.
Once I had done all this I re flashed a new twrp recovery, then flashed a new rom from recovery, then gapps.. Still cant the find a vodafone stock rom I was on but as I now have S Off I guess that doesnt matter and I can flash the european latest rom if i want to.
Thank you for taking the time to help me Mate, I am Grateful.
Im still on 1.15 radio and I think I will try to flash that next with the 1.20 or higher version to see if it helps with my phone signal which is not very good

Htc One M8 network problem

My HTC One M8 from Verizon got messed up when i loaded a custom rom on it. It lost IMEI,baseband and the necessary stuff to make it detect network.
I tried getting the info in fastboot and found out that the IMEI is still somewhere in the phone.
Please HELP...
I am unable to post fastboot log now but i will do that as soon as i can, my HTC bootloader has been unlocked and s-off. TIA
Here is the fastboot log
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.15.2133156.UA13G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.19.707.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: ***********
INFOimei: *************
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_wlv
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B2****
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 3aa067db
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Mod Edit: removed sensitive information.

I had the same problem. The solution is flash " DOTTAT_VZWM8_S_OFF_SF_6.0_RUU.zip " from here https://ga1.androidfilehost.com/dl/...5911973442/DOTTAT_VZWM8_S_OFF_SF_6.0_RUU.zip? .
Once that you have downloades the file change the name to "0P6BDIAG.zip". Then you have to put file in your SD Card and boot on hboot. It is going to check the file and ask you if you want to flash it. When finish it and restart, you are going to have network working again. Best regards

I get invalid img error;seems file is corrupt

Adebayo0437 said:
I get invalid img error;seems file is corrupt
Click to expand...
Click to collapse
Yep buddy that's it ?. Corrupt.
Sent from my HTC6545LVW using Tapatalk

dottat said:
Yep buddy that's it . Corrupt.
Sent from my HTC6545LVW using Tapatalk
Click to expand...
Click to collapse
What that supposed to mean?

Adebayo0437 said:
What that supposed to mean?
Click to expand...
Click to collapse
means the file was corrupt or got corrupted during download. if you can find an RUU you should be able to use fastboot to flash it

Adebayo0437 said:
What that supposed to mean?
Click to expand...
Click to collapse
Translation: re-download and try again.
And try not to knock a developer by saying he's posting corrupt files. Files sometimes lose information during download, which would cause them not to work. This is usually the problem.
You could avoid this by checking md5 after every download and comparing it to the posted one on his website. Match = good to flash.
Good luck.