GT-P3113 need help with clockwork mod to get CM10 - Galaxy Tab 2 Q&A, Help & Troubleshooting

Trying to install Clockwork mode to ultimately install CM10 Samsung Galaxy Tab 2 7 with model GT-P3113 with 4.0.4 Android
Went to
http://forum.xda-developers.com/showthread.php?t=1728987
and followed directions went into Odin mode on tablet then installed Odin on the computer and installed GT-P3113_ClockworkMod-Recovery_6.0.1.0.tar at PDA
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
But when I do the power+ up button still getting into Android System Recovery 3e instead of clockwork, and unable to install CM10
Thanks for all help

It seems the problem was 4.0.4 Android, found this thread and used the CWM he supplied instead and works.
http://forum.xda-developers.com/showpost.php?p=27792825&postcount=11

Related

[Q] (HELP) Wipe's- Hard Reset - NO WORK--Odin Fail Galaxy Tab 2 7.0

My big problem is than the Factory reset no work.. Also the Wipe's in mod recovery..
My Galaxy Tab star with the app old, no change absolutely nothing... No Erasing Nothing...
I install a new rom in mod recovery but no work..
I Install a rom stock - Odin 3.0.9 and say: FAIL!
When I use the tab, google apps, facebook, gmail, and other app's don't work...
google.process.acore..... TREBUCHET.... and other important process no work... (Sorry , my english is bad ) :/
------ ODIN -----
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> Sbl.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
.......................
Please, I Need Your Help!
Flash stock rom again... Download from samsung-updates
Sent from my GT-I9300 using XDA Premium 4 mobile app

[Q] Note SCH-I925 blinking white screen no recovery mode

I recently tried to unroot my Galaxy Note 10.1 SCH-I925. When I tried to flash the stock firmware on it I get the following:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tired almost every piece of firmware I could find but I have no success . I am still kinda new to flashing firmware but this is my only failure so this has got me stuck. Is there anyone out there with a solution or should sent it to a professional
i have the same problem if you find solution please advice

Question twrp recovery keeps changing to stock recovery

Hello guys,
I'm a bit new to posting things to this forum. My english isn't very good either :fingers-crossed:
My problem is:
i'm trying to install TWRP recovery to my s7. Everytime i install it with Odin everything works and when i reboot into recovery it goes automatically to my stock recovery.
LOG odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Could somebody please help me with my problem
I'm sorry if this has been asked before but i just can't find the awnser
i've used this tutorial: http://www.droidviews.com/install-twrp-galaxy-s7-exynos-variants-g930ffdxsw8/
Jesse050 said:
Hello guys,
I'm a bit new to posting things to this forum. My english isn't very good either :fingers-crossed:
My problem is:
i'm trying to install TWRP recovery to my s7. Everytime i install it with Odin everything works and when i reboot into recovery it goes automatically to my stock recovery.
LOG odin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Could somebody please help me with my problem
I'm sorry if this has been asked before but i just can't find the awnser
i've used this tutorial: http://www.droidviews.com/install-twrp-galaxy-s7-exynos-variants-g930ffdxsw8/
Click to expand...
Click to collapse
I had the same problem. I just used chainfire 's auto root and then installed twrp with flashify.

after flashing Twrp can't come into Recovery Twrp

After flashing Twrp with Odin I can't acces Twrp Recovery. I think flashing was succesfully:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
when I boot device with Power button + volume up I see Samsung Galaxy Note 10.1 logo but no further movement. I can only restart device to stock rom.
How to come into Twrp Recovery ?
I solved the problem by using another Twrp. My device is a 2012 version of 10.1. I used Twrp version 2014.

Install twice custom recovery on samsung galaxy A10

First of all sorry for my bad english.... i want to install custom recovery on samsung a10 me install orangefox recovery but it say fail to flash zip or cant read internel storage etc..... so install twrp recovery using Odin. Now my phone is not booting in recovery mode i already wipe the cache/system/vendor etc.... now my phone is restarting again and again
when i go to odin mode and flash android 9 its give error after param.bin
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5716 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> param.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone also says SW REV CHECK FAIL (Bootloader) Device 5, Binary: 4 after failed ODIN install
sorry for bad english...

Categories

Resources