[Q] TF300TG - Any real working CustomRoms? - Transformer TF300T Q&A, Help & Troubleshooting

Hi,
please excuse me for my bad English.
Are there any good CustomRom working for the TF300TG?
And is there a chance to get CyanogenMod or AOKP running on the TF300TG without loosing mobile data connection?
Thanks!
Simon-PC

if you are still on ICS, baked bean is the Rom for you.
If you are on JB there is only Hydro for you.

mikaole said:
if you are still on ICS, baked bean is the Rom for you.
If you are on JB there is only Hydro for you.
Click to expand...
Click to collapse
TF300TG isnt supported by hydro jb till asus will post their official jb OTA / sources, hydro ics support for the TG is broken in the latest version and seanzscreams wont update it anymore.
as for baked beans, searching the thread I see the OP promise to work on a tf300TG version but then there's no update, are you sure that its supported and fully working?

mikaole said:
if you are still on ICS, baked bean is the Rom for you.
If you are on JB there is only Hydro for you.
Click to expand...
Click to collapse
There ist no BakedBean-build for the TF300TG I think. But I will test it tomorrow.
And I tried Hydro (ICS-version)... it doesn't worked.
Edit: Oh... NixZero already said it...

tested cleanrom 3.2
Simon-PC said:
There ist no BakedBean-build for the TF300TG I think. But I will test it tomorrow.
And I tried Hydro (ICS-version)... it doesn't worked.
Edit: Oh... NixZero already said it...
Click to expand...
Click to collapse
hi
i have installed cleanrom 3.2 ,its working now install with default 300t then update with 3g kernel
but i cant switch it off from switchpro widget, and did not try 3g yet need to put some money on sim
however you can always use stock kernel with a custom rom

Related

[Q] Wich steps do i have take to have CM10

Hello,
As i'm not new to android i'm to the TF300T.
I have at the moment [ROM]ASU-JellyBean-Hydro 2.8-(9/11) Project melted butter smooooth installed and i realize the Tablet uses the Jelly Bean Bootloader. But my question is how do i get from this rom to Cyanogenmod 10? I googled and searched this forum but i just can't find it.
I came from ASUS Transformer Pad TF300T Firmware: V10.4.2.9 Only for WW SKU (Android 4.1) - 2012.08.28 firmware.
u can't at the moment.
w0uter said:
Hello,
As i'm not new to android i'm to the TF300T.
I have at the moment [ROM]ASU-JellyBean-Hydro 2.8-(9/11) Project melted butter smooooth installed and i realize the Tablet uses the Jelly Bean Bootloader. But my question is how do i get from this rom to Cyanogenmod 10? I googled and searched this forum but i just can't find it.
I came from ASUS Transformer Pad TF300T Firmware: V10.4.2.9 Only for WW SKU (Android 4.1) - 2012.08.28 firmware.
Click to expand...
Click to collapse
I am as well stock on official jb based ROM as it updated the bootloader. There is no way to go back to cm10 or cm9 at this very moment. I can't wait get cm10 running on my system. Have finger crossed....
xlife86 said:
I am as well stock on official jb based ROM as it updated the bootloader. There is no way to go back to cm10 or cm9 at this very moment. I can't wait get cm10 running on my system. Have finger crossed....
Click to expand...
Click to collapse
Yes but i thought i read somewhere that you can downgrade your bootloader and mayby going from stock jb back to stock ics
w0uter said:
Yes but i thought i read somewhere that you can downgrade your bootloader and mayby going from stock jb back to stock ics
Click to expand...
Click to collapse
I'm pretty sure that at this point there's no way to downgrade the bootloader. Hopefully ROMs like CM10 will update the kernel so it works with the new bootloader, but we'll have to wait and see.
the CM10 dev just wrote that he already got CWM flashed on the JB bootloader. He is trying with the new kernel, to get it boot on JB and Ics
mikaole said:
the CM10 dev just wrote that he already got CWM flashed on the JB bootloader. He is trying with the new kernel, to get it boot on JB and Ics
Click to expand...
Click to collapse
Would you like to post a link to it so i can follow the progress on it.
Oh my yes, please, the link, the link. :highfive:
Jim
http://forum.xda-developers.com/showthread.php?t=1845200&page=24

[Dump?] Android JB 4.1.2

Hello to all!
Something regarding Android 4.1.2 Dumped from Asus Nexus?
There are sources already, AOKP build 5 will likely be 4.1.2.
K900 said:
There are sources already, AOKP build 5 will likely be 4.1.2.
Click to expand...
Click to collapse
@K900. just curious, why dont you have a thread for your AOKP build on xda?
paranoid android is upgraded to 4.1.2
catfishbilly said:
@K900. just curious, why dont you have a thread for your AOKP build on xda?
Click to expand...
Click to collapse
Because XDA is, well, XDA.
devilpera64 said:
Hello to all!
Something regarding Android 4.1.2 Dumped from Asus Nexus?
Click to expand...
Click to collapse
why a nexus7 dump?sources was been pushed to AOSP,we have only to wait that teams rebase their roms .Anyways,i have it running on mine devices,and it's nothin special to have rush to test it.
Latest TeamEOS3 #77 is updated to 4.1.2
Seems to be working fine so far.
ParanoidAndroid is 4.1.2 and is by far the fastest ROM I have used including cm10 and eos3 that I keep flip flopping between.
I have found a happy home for now.
Cheers
agreed.on paranoid now,recame here after trying eos,but i prefer this so much more.don't like eos at all
sert00 said:
agreed.on paranoid now,recame here after trying eos,but i prefer this so much more.don't like eos at all
Click to expand...
Click to collapse
Why? ^_^

[Q] [4.1.2] CyanogenMod 10

Hello guys!
Just installed 4.1.2 on my Samsung SII and just love it, so it's time for my TF300T to get the update to.
After some searching i found that [OFFICIAL][4.1.2] CyanogenMod 10 Nightlies is the only on out there, or am I wrong?
Problem is I belive I am on JB bootloader. When I got my Asus I updated ICS stock to JB via OTA when I got the prompt, after that I unlocked the device, rooted it and installed TWRP and now running CleanROM 2.5 with CleanKernel. (have also runned Hydro 4.1).
So the questions i kind of simple: Can I install CyanogenMod 10 on my Asus taking in mind what I told you earlier?
Thanks in advance!
Fancy Pants said:
Hello guys!
Just installed 4.1.2 on my Samsung SII and just love it, so it's time for my TF300T to get the update to.
After some searching i found that [OFFICIAL][4.1.2] CyanogenMod 10 Nightlies is the only on out there, or am I wrong?
Problem is I belive I am on JB bootloader. When I got my Asus I updated ICS stock to JB via OTA when I got the prompt, after that I unlocked the device, rooted it and installed TWRP and now running CleanROM 2.5 with CleanKernel. (have also runned Hydro 4.1).
So the questions i kind of simple: Can I install CyanogenMod 10 on my Asus taking in mind what I told you earlier?
Thanks in advance!
Click to expand...
Click to collapse
No, you cant. Till now there is no CM10 for the jb bootloader, but xplowild is working on it.
I reccommend the OC Rom with untermensch kernel. Runs fast as hell.
mikaole said:
No, you cant. Till now there is no CM10 for the jb bootloader, but xplowild is working on it.
I reccommend the OC Rom with untermensch kernel. Runs fast as hell.
Click to expand...
Click to collapse
Thanks for the reply!
Yeah I saw a forumthread about xplowilds work, seems I got a wait for a while.
I will take a closer look on the ROM you mentioned!
reply
mikaole said:
No, you cant. Till now there is no CM10 for the jb bootloader, but xplowild is working on it.
I reccommend the OC Rom with untermensch kernel. Runs fast as hell.
Click to expand...
Click to collapse
..mmm correctly if i'm wrong but i read in the post that the CM10 nightlies was updated to the JB bootloader... and I just waiting to they fix the wifi problem to give it a try right now i'm with clean rom.
is that correct???

[Q] Move from CM10.1 nightly to CleanRom

Hello xda-developers,
I'm considering switching to "CleanROM Inheritance 3.2". Right now I'm running the CM10.1 nightly "2013-01-22" and I was wondering If I'm actually able to do so, because the CleanRom-Thread says I'd need the "Official Asus Jellybean 4.1.1 bootloader".
I'm unsure If I can actually switch ROMs because I thought the bootloader is not changeable and will always stay the same for one device. (Probably wrong, I guess?)
Could you please tell me if this is possible? And if yes how to get the 4.1.1 bootloader. (I'm using a 4.2 rom right now - so I have a 4.2 bootloader, right?)
Thanks in advance!
If you can install CM 10.1 on your device, then CleanROM 3.2 should not be a problem. Iv done that several times
And, 4.1 and 4.2 bootloaders are the same, maybe with some slight changes, not really sure about this one )
grimsonfart said:
If you can install CM 10.1 on your device, then CleanROM 3.2 should not be a problem. Iv done that several times
Click to expand...
Click to collapse
Great, thank you! I just wanted to be sure. Flashing it right now!
Nijin said:
Great, thank you! I just wanted to be sure. Flashing it right now!
Click to expand...
Click to collapse
Great, report back when you got it installed. I recommend you use one of the Clemsyn kernels, dosent really mather which one, but i use the 1.8GHz one )).
You aren't on JB 4.2.1 Bootloader, becouse now it's impossible. Asus haven't unlocked our bootloader in 100%. You can't install custom bootloaders and APX is locked on unlocked JB bootloader. On the forum will be petition to Asus unlock 100% our bootloaders, to we could install for example Custom bootloaders, and our device will be unbrickable with NVflash access. The newest bootloader for TF300T is JB 4.1.1. I think that if you installed Cyanogenmod 10.1, you're on JB bootloader. Were you on JB or ICS, when you were unlocking your bootloader? It's very difficult to install Offical Asus OTA update on unlocked bootloader, becouse many people breaks their devices when they do it.
Hazard17 said:
You aren't on JB 4.2.1 Bootloader, becouse now it's impossible. Asus haven't unlocked our bootloader in 100%. You can't install custom bootloaders and APX is locked on unlocked JB bootloader. On the forum will be petition to Asus unlock 100% our bootloaders, to we could install for example Custom bootloaders, and our device will be unbrickable with NVflash access. The newest bootloader for TF300T is JB 4.1.1. I think that if you installed Cyanogenmod 10.1, you're on JB bootloader. Were you on JB or ICS, when you were unlocking your bootloader? It's very difficult to install Offical Asus OTA update on unlocked bootloader, becouse many people breaks their devices when they do it.
Click to expand...
Click to collapse
He had to be on JB bootloader because otherwise he would not have CleanROM installed, which is JB. If he was on ICS and flashed CleanROM he would automaticly install the JB bootloader (might be wrong on this one)
Odp: [Q] Move from CM10.1 nightly to CleanRom
grimsonfart said:
He had to be on JB bootloader because otherwise he would not have CleanROM installed, which is JB. If he was on ICS and flashed CleanROM he would automaticly install the JB bootloader (might be wrong on this one)
Click to expand...
Click to collapse
No, if you wanted to upgrade bootloader, You would have to flash offical Asus OTA, there isn't another way.
Sent from my Asus Transformer Pad TF300T powered by CleanROM 3.2 Inheritance
Hazard17 said:
No, if you wanted to upgrade bootloader, You would have to flash offical Asus OTA, there isn't another way.
Sent from my Asus Transformer Pad TF300T powered by CleanROM 3.2 Inheritance
Click to expand...
Click to collapse
Well i was wrong then. :laugh:
Ah okay great, thanks for the clarification. I'm running cleanRom now and it works like a charm. Thanks to everyone!
Have you flashed CleanROM over the Cyanogenmod 10? Did you format System? I think that flashing CROMI over CM10 was a bad idea, becouse CM isn't Stock base as CleanROM. If I were you, I would flash at the begining Asus JB OTA from Asus website.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Hazard17 said:
Have you flashed CleanROM over the Cyanogenmod 10? Did you format System? I think that flashing CROMI over CM10 was a bad idea, becouse CM isn't Stock base as CleanROM. If I were you, I would flash at the begining Asus JB OTA from Asus website.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
Click to expand...
Click to collapse
There is nothing to worry about, as i said i have done this several times, but as you say do a factory reset before flashing is allways a good idea.
Odp: [Q] Move from CM10.1 nightly to CleanRom
Oh, good. Do you remember what score did you have on CM10 in AnTuTu?
Sent from my Asus Transformer Pad TF300T powered by CleanROM 3.2 Inheritance
Hazard17 said:
Oh, good. Do you remember what score did you have on CM10 in AnTuTu?
Sent from my Asus Transformer Pad TF300T powered by CleanROM 3.2 Inheritance
Click to expand...
Click to collapse
Iv only done quadrant, got 3300 something while in performance mode. I get almost the double using CleanROM and clemsyn 1.8 GHz, and i got 6084!!

Please Suggest a Stable ROM for XOOM MZ601 - Everest?

Hello XOOMERS! :highfive:
I just rooted my Motorola XOOM 3G Version - MZ601 (Named as Everest,correct me if I'm wrong!) Running on ICS 4.0.4.
The reason i rooted my device was to overclock so that some games don't lag on it,also i wanted to try Jellybean custom rom if available for my model.
Please provide the link for a stable jellybean rom for MZ601 Everest XOOM and also advice on which kernel to flash with.
I would be really glad if someone could help me
Hi new rooted Xoomer! Glad to see you here .
There are some good ROMs out there, my favs are CM10.1 and EOS4. But you can try some others . In the second post of my FAQ (Sticky in Q&A) I covered up most of Xoom ROMs out, hope you can find one really suitable for your needs.
Happy flashing .
~Lord
hello..
Can someone help me..? I installed new rom with 4.2.2 on my xoom mz601, now my xoom is failing to work properly,i think the rom installed is not that stable, my device keeps on restarting randomly, im looking all over the net for a better rom, I've read an article about eos4 working properly and I wanna try that but unfortunately all links they're showing are dead links.. Can somene here assist me..??
grab1028 said:
Can someone help me..? I installed new rom with 4.2.2 on my xoom mz601, now my xoom is failing to work properly,i think the rom installed is not that stable, my device keeps on restarting randomly, im looking all over the net for a better rom, I've read an article about eos4 working properly and I wanna try that but unfortunately all links they're showing are dead links.. Can somene here assist me..??
Click to expand...
Click to collapse
Which ROM did you install that is giving you issues? Have you flashed a custom kernel?
Sent from my Galaxy Nexus using Tapatalk
TheMan0790 said:
Which ROM did you install that is giving you issues? Have you flashed a custom kernel?
Click to expand...
Click to collapse
I only flashed it using the recovery of tiamat.. Those were CM 10.1 and a gapps.. Thats all...
I'm running CM 10.1 and it is very stable for me. Maybe a bad flash. Did you try doing a fresh install of the ROM after wiping your XOOM?
Sent from my Galaxy Nexus using Tapatalk
TheMan0790 said:
I'm running CM 10.1 and it is very stable for me. Maybe a bad flash. Did you try doing a fresh install of the ROM after wiping your XOOM?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Sorry for the late reply... Just got a chance of hooking up to the net again..
Would you mind giving me a good and working link of which i could download the neccessary files for my device? (i.e. Roms, gapps, kernels, etc.) I'm. Really having a hard time looking for suitable rom for my xoom mz601..
grab1028 said:
Sorry for the late reply... Just got a chance of hooking up to the net again..
Would you mind giving me a good and working link of which i could download the neccessary files for my device? (i.e. Roms, gapps, kernels, etc.) I'm. Really having a hard time looking for suitable rom for my xoom mz601..
Click to expand...
Click to collapse
CyanogenMod 10.1 For the Motorola Xoom (Wingray, Stingray, & Everest)
http://forum.xda-developers.com/showpost.php?p=36323976&postcount=1
Gapps
http://forum.xda-developers.com/showpost.php?p=36324004&postcount=2
risposta in ridardo lo so..
kblade29m said:
CyanogenMod 10.1 For the Motorola Xoom (Wingray, Stingray, & Everest)
http://forum.xda-developers.com/showpost.php?p=36323976&postcount=1
Gapps
http://forum.xda-developers.com/showpost.php?p=36324004&postcount=2
Click to expand...
Click to collapse
per me la migliore resta la 81 nightly team eos
kblade29m said:
CyanogenMod 10.1 For the Motorola Xoom (Wingray, Stingray, & Everest)
http://forum.xda-developers.com/showpost.php?p=36323976&postcount=1
Gapps
http://forum.xda-developers.com/showpost.php?p=36324004&postcount=2
Click to expand...
Click to collapse
hello again kblade,
thanks for your assistance. apology for my very late response.. I'm just wondering what to download, is it everest? Wingray? or Stingray?
grab1028 said:
hello again kblade,
thanks for your assistance. apology for my very late response.. I'm just wondering what to download, is it everest? Wingray? or Stingray?
Click to expand...
Click to collapse
MZ601 is Everest, but if you dont use the 3g (sim card) connection, Wingray will also work.
Everest (MZ601) = 3g + WiFi
Wingray (MZ604) = WiFi only
Sent from my Xoom using Tapatalk

Categories

Resources