What are some of your guys's favorite Tasker profiles for your GS3?
aaronfuhrer said:
What are some of your guys's favorite Tasker profiles for your GS3?
Click to expand...
Click to collapse
One of my more useful ones is a set of Bluetooth controls. It has 3 core profiles and any number of time profiles that will turn Bluetooth on at a specified time and disable it after so many minutes with a few different conditions to handle active connections and such. This keep Bluetooth off for most of the day and only turns it on when I normally need it the most.
Profile Name: Bluetooth Noon
(I have three of these. One for the morning drive to work, one for lunch time and one for the drive home after work)
Contexts:
Time - 11:45
Days - Mon, Tue, Wed, Thu or Fri
Tasks:
Enter Task
1.) Bluetooth - Set On
2.) Variable Set - Name %BTSchedActive To yes
3.) Wait - MS 0 Seconds 0 Minutes 30 Hours 1
4.) Variable Set - Name %BTSchedActive to no
5.) Profile Status - Name Bluetooth Countdown Set On
Profile Name: Bluetooth Connected
Contexts:
Bluetooth Connected - *, *
Tasks:
Enter Task
1.) Variable Set - Name %BTConnActive To yes
Exit Task
1.) Variable Set - Name %BTConnActive To no
2.) Profile Status - Name Bluetooth Countdown Set On
Profile Name: Bluetooth Countdown
Contexts:
Variable Value - %BTConnActive Matches no
Variable Value - %BTSchedActive Matches no
Tasks:
Enter Task
1.) Profile Status - Name Auto Off Unpaired Bluetooth Set On
Profile Name: Auto Off Unpaired Bluetooth
Contexts:
NOT Bluetooth Connected - *, *
Variable Value - %BLUE Matches on
Tasks:
Enter Task
1.) Variable Set - Name %TIMCOUNTER To %TIME + 900
2.) Wait - MS 0 Seconds 0 Minutes 1 Hours 0 Until %TIMES > %TIMCOUNTER
3.) Bluetooth - Set Off If %PACTIVE ~ *Auto Off Unpaired Bluetooth*
Edit: I've attached the XML files for ease of import. Just rename them from .txt to .xml after you download them.
Would anyone be able to create a tasker profile to disable the LED notification during certain hours (for TouchWiz)? Example, turn off all LED notifications at 11pm, turn back on at 7am.
s197 said:
Would anyone be able to create a tasker profile to disable the LED notification during certain hours (for TouchWiz)? Example, turn off all LED notifications at 11pm, turn back on at 7am.
Click to expand...
Click to collapse
Try these out. The Disable Sync at night has the time component and prevents email and other Google sync items from being sync during that time frame (I have to leave my phone off silent for On-Call pages, but hate getting email notifications and such at 2am). With the below, from 11:30pm to 6:20am Sync is disabled. As a result, any notifications that do come in will trigger the other two profiles to get ride of the notification light. On handles the initial notification received the other turns the light back off if you turn the screen on the off again (normally the notification is reset and it would flash if we didn't add this extra step. The two that issue commands require Root. It would be best to manually run them once to ensure Tasker has the permissions it needs.
If you don't want sync disabled, then change the profile Active attribute in 'Disable Notify Light @night' to a Time range. Hope this helps.
Profile Name: Disable Notify Light @night
Contexts:
Notification - *, *
Profile Active - Disable Sync At Night
Tasks:
Enter Task
1.) Run Shell - Command echo 0 > /sys/devices/virtual/sec/led/led_pattern Use Root
Profile Name: Disable Notify Light
Contexts:
Display State - Off
Profile Active - Disable Disable Notify Light @night
Tasks:
Enter Task
1.) Run Shell - Command echo 0 > /sys/devices/virtual/sec/led/led_pattern Use Root
Profile Name: Disable Sync At Night
Contexts:
From - 23:30 Till 06:20
Power - Any
Tasks:
Enter Task
1.) Auto Sync - Set Off
Edit: I've attached the XML files for ease of import. Just rename them from .txt to .xml after you download them.
Will try this out tonight, really appreciate your help and quick response!
Thanks for those great profiles, ViperRacer. I hope you don't mind if I ask you a quick question. You don't need to go to the time to make one out if you don't want to, but I've been trying to make a profile to disable the lock screen when I'm at home. I have it set to disable when I'm on my Wi-Fi, but it only seems to work 50% of the time. It'll be off for a while, then randomly turn on again. Any help would be appreciated! Thanks again!
aaronfuhrer said:
Thanks for those great profiles, ViperRacer. I hope you don't mind if I ask you a quick question. You don't need to go to the time to make one out if you don't want to, but I've been trying to make a profile to disable the lock screen when I'm at home. I have it set to disable when I'm on my Wi-Fi, but it only seems to work 50% of the time. It'll be off for a while, then randomly turn on again. Any help would be appreciated! Thanks again!
Click to expand...
Click to collapse
I'd be curious to know what your Advanced Wi-Fi Settings were, specifically the 'Keep Wi-Fi on during sleep'. If it is set to 'Never' or 'Only when plugged in' it will turn off the Wi-Fi at some point while the phone screen is off, thus causing the tasker profile to stop running until the phone is woken up again which would happen second to you turning on the phone and being presented with the unwanted lock screen.
I would suggest setting that option to 'Always' and see if it yields better results.
ViperRacer said:
Try these out. The Disable Sync at night has the time component and prevents email and other Google sync items from being sync during that time frame (I have to leave my phone off silent for On-Call pages, but hate getting email notifications and such at 2am). With the below, from 11:30pm to 6:20am Sync is disabled. As a result, any notifications that do come in will trigger the other two profiles to get ride of the notification light. On handles the initial notification received the other turns the light back off if you turn the screen on the off again (normally the notification is reset and it would flash if we didn't add this extra step. The two that issue commands require Root. It would be best to manually run them once to ensure Tasker has the permissions it needs.
Click to expand...
Click to collapse
I tried the profiles last night and unfortunately it didn't work. The auto-sync didn't shut off and the LED notification stayed on. I did run it manually to allow root so I don't think that was the issue. Any idea why it didn't work?
s197 said:
I tried the profiles last night and unfortunately it didn't work. The auto-sync didn't shut off and the LED notification stayed on. I did run it manually to allow root so I don't think that was the issue. Any idea why it didn't work?
Click to expand...
Click to collapse
That's rather strange. The disable auto sync is one of the simpler profiles and should have worked. I hate to ask, but is the profile enabled (green check mark)? All three should be enabled at all times. Try modifying the profile and set the time range to be something that would force it to activate now and plug it into a power source. If you don't want the power source requirement (which is another possibility) just remove that context. I personally keep it in case I'm out late with friends so I continue to get email even if it is past the hour.
s197 said:
I tried the profiles last night and unfortunately it didn't work. The auto-sync didn't shut off and the LED notification stayed on. I did run it manually to allow root so I don't think that was the issue. Any idea why it didn't work?
Click to expand...
Click to collapse
I also ran this last night.
In order for the profile to kick in it needs to be during the time specified and plugged in.
Once I plugged in my phone my sync turned off.
My red battery charge light did come on. Not sure if this stayed on the whole time or not. Later at night when I woke up I did not see the green charged light on.
At the specified time in the morning, while still plugged in my sync turned back on and I received my email messages.
So for me this worked well, but I will need to check to see why the red light stayed on. I would have expected the profile to kill this light too.
Thanks for these profiles they worked pretty good for me.
Austin808 said:
...My red battery charge light did come on. Not sure if this stayed on the whole time or not. Later at night when I woke up I did not see the green charged light on...
Click to expand...
Click to collapse
I had turned my charging light off within the first day of getting the phone so I've never actually tested that part. I would take a guess that there is no notification occurring, thus the profile isn't triggered killing the LED for charging. The Green LED is killed because we do get a notification in the bar for a full charge. One solution is to maybe add another couple of tasks in the Disable Sync At Night profile that waits for 10 seconds and then issue the command there to kill off that light. But thats only a guess. I'll play around with it and see if that would fix it.
Update:
I tested out this and it worked. Screen was off and within 10 seconds the led was shutoff.
Profile Name: Disable Sync At Night
Contexts:
From - 23:30 Till 06:20
Power - Any
Tasks:
Enter Task
1.) Auto Sync - Set Off
2.) Wait - Seconds10
3.) Run Shell - Command echo 0 > /sys/devices/virtual/sec/led/led_pattern Use Root
This will take care of the initial red charging light. As a note, the light in theory would come back if the screen was turned back on and off but the other profile triggered at display off will handle that condition. Adjust the 10 second wait as needed if your screen timeout is longer. May not be much of an issue though as the other profile should kick in in the event the screen stays on long enough.
ViperRacer said:
That's rather strange. The disable auto sync is one of the simpler profiles and should have worked. I hate to ask, but is the profile enabled (green check mark)? All three should be enabled at all times. Try modifying the profile and set the time range to be something that would force it to activate now and plug it into a power source. If you don't want the power source requirement (which is another possibility) just remove that context. I personally keep it in case I'm out late with friends so I continue to get email even if it is past the hour.
Click to expand...
Click to collapse
Doh! I was testing it without it being plugged in. I bet that was the problem, thanks I'll adjust to remove that feature and see if it works.
Edit: Works!
ViperRacer said:
Update:
I tested out this and it worked. Screen was off and within 10 seconds the led was shutoff.
Profile Name: Disable Sync At Night
Contexts:
From - 23:30 Till 06:20
Power - Any
Tasks:
Enter Task
1.) Auto Sync - Set Off
2.) Wait - Seconds10
3.) Run Shell - Command echo 0 > /sys/devices/virtual/sec/led/led_pattern Use Root
This will take care of the initial red charging light. As a note, the light in theory would come back if the screen was turned back on and off but the other profile triggered at display off will handle that condition. Adjust the 10 second wait as needed if your screen timeout is longer. May not be much of an issue though as the other profile should kick in in the event the screen stays on long enough.
Click to expand...
Click to collapse
Thanks, this information helped me to find a solution that works for me.
I added the Wait 10 seconds to the task Notify Light Off.
Added Notify Light Off task to the Disable Sync At Night profile
Changed profile Disable Notify Light, change the Profile Active to Disable Sync At Night (if I did not do this if I turn on the screen then back off again the light would stay on)
I think this is working perfectly for me now. Thanks again.
I have these (no order) I can think of:
1. power plug: turn keyguard off, keep screen on
2. wifi off at 10:30 pm in case I forget to turn it off (battery savings)
3. sync off 10:30-6am so I do not get emails and such while I sleep
4. on sunday's from 9-10:15 it mutes the phone while I am in church
5. from 11:45pm until 5:30am it goes into airplane mode (battery savings)
6. when Navi app is run, GPS is turned on, screen brightness is turned up, keyguard is turned off, screen stays on
7. BT turns off at 9pm (battery savings)
8. whenever BT initially syncs, a tone is played to tell me the phone is connected and ready
Hmm, that keep Wi-Fi on during sleep option didn't seem to help. Not sure what else it would be. Thanks for trying anyways!
aaronfuhrer said:
Hmm, that keep Wi-Fi on during sleep option didn't seem to help. Not sure what else it would be. Thanks for trying anyways!
Click to expand...
Click to collapse
There is a little known bug/feature of the S3. I found and saved this tip a while back. Needs to be done every time you reboot though.
WiFi Powersave
Using the phone dialer, dial *#0011# then press the menu key, then from the popup menu, select WiFi. You will see a button to turn off the power save mode. It will stay off until the phone is restarted, and this should allow control by Tasker to be more consistent. Press the back button repeatedly to get out of these screens.
Thanks for tips I was wondering why I couldn't get the lock screen profiles to work either. What if they were tied to cell towers near home?
Sent from my SCH-I535 using Tapatalk 2
aaronfuhrer said:
Hmm, that keep Wi-Fi on during sleep option didn't seem to help. Not sure what else it would be. Thanks for trying anyways!
Click to expand...
Click to collapse
My lock screen has randomly appeard on me as well.
Profiles:
Wi-fi on when in range of certain towers
lock screen off when connected to router
I seem to get the random unexpected lock screens after a rebooting, and thought I had it narrowed down to cycling tasker on and off a few times. I just started using tasker a couple days ago, will keep tinkering with it, let me know if this helps you at all.
I just started using tasker and I'm trying to create a (what should be) very simple profile.
I want to have my display brightness normally set to 36% on battery and 75% when plugged in.
It works very well, except that if I reboot my phone while plugged in, it will not go back down in brightness once i unplug it.
I simply set a "task" to set the brighness at level 165 when power source is AC. I don't see a selection for battery, just "any, AC or USB".
How do I get it to check if it's not plugged in to set the display brighness?
modmandan said:
I just started using tasker and I'm trying to create a (what should be) very simple profile.
I want to have my display brightness normally set to 36% on battery and 75% when plugged in.
It works very well, except that if I reboot my phone while plugged in, it will not go back down in brightness once i unplug it.
I simply set a "task" to set the brighness at level 165 when power source is AC. I don't see a selection for battery, just "any, AC or USB".
How do I get it to check if it's not plugged in to set the display brighness?
Click to expand...
Click to collapse
Try using the Invert option with Both AC/USB. It should fire when power is not provided by either of those sources.
Related
I use Tasker for automating a lot of redundant tasks on my phone. I figured I would post a couple I'm using with hope that others will share with me some stuff they use it for.
action: Docked.
Tasks done when docked: Bluetooth on, wifi off, gps on, auto brightness set off [if time < 1800, Display Brightness set to 255 if time < 1800, pandora set on.
exit tasks: Bluetooth off, auto brightness on if TIME < 1800, pandora set off, gps off.
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
action: phone face down
Tasks done: airplane mode on if time < 2200, all sounds off except for alarm
exit tasks: airplane mode off, all sounds revert to previous settings.
these 3 i use, if you have any others let me know. If you need help with the program let me know too.
here is where you can grab tasker.
http://tasker.dinglisch.net/
Sounds something that I would definitly use. I beleive its a paid app, but still worth it. I'll look into it. Does it have settings for wifi e.g.- 1 touch WIFI on, because i'm using the stock wifi on/of toggle but I then have to go into wifi settings and actually see my phone connecting to my network in order for i to work and turn on.... ??????
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
generic.imitation said:
Action open Application Maps/Nav or any gps app.
Tasks done: GPS on
exit tasks done: GPS off.
Click to expand...
Click to collapse
How do you set up an OR for the app launch context? I'm trying to get it to turn on GPS when I open Maps, Foursquare, Yelp, or Places, but it doesn't let me multi-select apps and if I add a context, Application isn't there.
Make it separate tasks.
make 1 for each app.
Foursquare - turn on gps. Turn off gps when exit.
Ect.
also, I guess there is a wiki with a bunch of samples I guess. I'm out at a remote beach on northern oahu right now, but if someone doesn't post it before me I'll post the link when I get home.
generic.imitation said:
Make it separate tasks.
make 1 for each app.
Click to expand...
Click to collapse
Yeah, that's what I've been doing. It'd just be nice if you could have conditionals in the context. IF Yelp OR Foursquare OR Maps OR Places then ...
Post over there and make a feature request, they should put that in I agree .
Just bought Tasker and so far I like it. Can't seem to figure out how to do the following task though.
I need to set to static IP when on a certain wifi connection. I already have the IP set and the only thing that will need to be done is to toggle the static IP checkbox in the advanced setting of wifi. I know how to specify the wifi network but how can I make it toggle that checkbox/setting?
Thanks for any info.
i made a simple widget to toggle the screen brightness to two preset brightens for inside and direct sunlight.
i could not find an app that let me choose the brightness, they either made it full dark/bright.
i can't work out however to toggle a different widget icon to indicate on/off...
i've tried set icon but with no luck
its not really needed but would be good to have/know for future apps
also, can anyone explain how the HTTP (get info from net) works?
i want to try a few things but not really sure how it works
This app is the best app on the market... hands down. #Win
generic.imitation said:
Yeah there are settings for connecting to wifi. Mine does it automatically when I get home based on the gps. Works most of the time, had to turn it on manually a couple times because the gps wasn't on.
Click to expand...
Click to collapse
You should use "wifi near" as a condition instead of "gps". That way it just toggles you wifi on and off periodically and if it is near... it will connect.
Gps is so demanding on the battery... and not always accurate... as you see
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
ichigopow said:
I set mine up so whenever I plug in my headphones my music app opens
Sent from my DROIDX using XDA App
Click to expand...
Click to collapse
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
MrDanger said:
I set my heaphones the same.. but at the same time, it cuts my media volume up (in case it was down) and when I unplug them... it returns my media volume back to it's previous value
Click to expand...
Click to collapse
I do the same except my volume goes down when I plug them in so I don't have music blaring in my ears.
Sent from my DROIDX using XDA App
I also have a profile that texts my gf a random message at a random time that is between 7:30 am and 7:40 am (so she don't think it's automated lol) every morning. I got that idea from LexusBrian
Again.. great app!
Here was I have got going on with tasker.
Car dock: gps on, bluetooth on, display always on, notification volume off. On exit they all do the opposite.
When home: wifi on. Exit wifi goes off.
At work: phone goes to vibrate for everything.
10pm to 545am: phone goes quiet.
I second it a best app ever. Wifi, gps, and bluetooth are never on when I don't need em. Come on you can't beat that. What a battery saver.
Sent from my DROIDX using XDA App
Tasker is an incredibly handy utility.
Here's the profiles I use:
GPSonForLocationApps - I think this one has already been covered by this thread.
WifiOnAtHome - I use the wifi near option... although I think it's causing issues with my 3G signal... it will occasionally turn on wifi to check if I'm at home which seems to turn off 3G. Still playing with this one.
LowVolumeDuringWorkHours - sets various volumes appropriately so I can still hear stuff but doesn't annoy folks working near by. I turn this on/off based on day of week and time of day. Upon exiting this profile it returns my volumes back to normal.
NoficationsOffAtNight - I turn off notifications at night and if my phone is plugged into AC.
SilentForMeetings - if I have a calendar entry where I'm marked as busy it turns my phone to silent mode.
Openwatch?
Hello
I am new to Tasker, and I'm starting to understand exactly how much you can do. Uses open watch a lot and have done a lot of settings to make my clock better. But I wonder if I can get messages from one app to my watch. The app is an ice hockey results service. And each time it becomes a goal, I get it as income message in the status bar. But can I get the message in the clock at the same time? Right now I just get a message in the watch which I've written, but would like it says in the status bar so you do not I pick up the phone to look at the result. Is there perhaps a few codes to enter, instead of my message is? Hope you understand me?
I have mine set to enable WiFi when I connect to a certain cell tower. Keeps the drain on my batter to nothing more than it was already at, and GPS is only enabled for about 5 minutes to and from the house. I'm sure the drain for that combined 10 minutes is much less than periodically checking the GPS or if a network is near.
I am turning off gps when I get to my home cell tower and turning on my wifi at the same time.
For my multimedia apps like pandora, I have my screen stay on when plugged to a power source.
Sent from my DROIDX using Tapatalk
I have been using Tasker the last couple of days and I am really started to like this app. I havent even scratched the surface of what this app is capable of but it would be nice to have a thread for all Tasker users to share the Profiles.
I currently have mine setup to shut off 3G when the screen is off and turn it back on when the screen is on. Its been working great. I got home today from work and was at 70% battery life after 10 hrs of light usage throughout the day.
So far I have
GPS Auto on and off when I open maps
Display off / data off
Display on / data on
Home area wifi auto enable
Battery full alert
NightSMSResponder
Missed call Auto reply
Call recorder
Screen off / Data off: do you still receive emails and mms?
Best app out!
I've been using this app for awhile as well... I've been able to fully automate the processes that I had to remember to do to conserve battery.
This is my setup.
1.At Girlfriend's house - GPS off, auto brightness on, notifications silenced and from 3am - 7am text messages are set to auto reply and calls sent to voicemail.
2.Headphones plugged - Load music app, adjust media volume, and turn screen off after 30 seconds.
3.Any power connected (USB or AC) - Key lock off
4.If USB plugged and file explore (Astro, ES) loaded, mount SD
5.Maps,Navigation loaded - GPS on, Auto Brightness on, System vol to max
Just some basic profiles.
I'm still in the trial period, do I have to purchase to be able to import the download-able profiles from the step through section of the site?
ATownI20 said:
I've been using this app for awhile as well... I've been able to fully automate the processes that I had to remember to do to conserve battery.
This is my setup.
1.At Girlfriend's house - GPS off, auto brightness on, notifications silenced and from 3am - 7am text messages are set to auto reply and calls sent to voicemail.
2.Headphones plugged - Load music app, adjust media volume, and turn screen off after 30 seconds.
3.Any power connected (USB or AC) - Key lock off
4.If USB plugged and file explore (Astro, ES) loaded, mount SD
5.Maps,Navigation loaded - GPS on, Auto Brightness on, System vol to max
Just some basic profiles.
I'm still in the trial period, do I have to purchase to be able to import the download-able profiles from the step through section of the site?
Click to expand...
Click to collapse
I was able to download profiles while in the trial period. The only problem I had was downloading profiles that had multiple downloads. What version are you using? I am using 1.0.8b2 but I see that b3 is available now.
thefoss said:
Screen off / Data off: do you still receive emails and mms?
Click to expand...
Click to collapse
No I do not. I can set it up so that data will toggle on and off every 5,10,15 minutes or whatever you want it set it.
I would like to figure out a way to have tasker enter my passcode that is required with my exchange lock since lockpicker does not work with Froyo
dmoses1969 said:
No I do not. I can set it up so that data will toggle on and off every 5,10,15 minutes or whatever you want it set it.
Click to expand...
Click to collapse
I was trying to set that up last night but it was telling me to install APNdroid for it to turn the data off. APNdroid states on their market page that it doesn't work with CDMA, so I have to ask, how did you manage to have Tasker turn data on and off ?
e-motion said:
I was trying to set that up last night but it was telling me to install APNdroid for it to turn the data off. APNdroid states on their market page that it doesn't work with CDMA, so I have to ask, how did you manage to have Tasker turn data on and off ?
Click to expand...
Click to collapse
If you install the latest beta version it will toggle data without using APNdroid. I do not have it installed and it works fine.
e-motion said:
I was trying to set that up last night but it was telling me to install APNdroid for it to turn the data off. APNdroid states on their market page that it doesn't work with CDMA, so I have to ask, how did you manage to have Tasker turn data on and off ?
Click to expand...
Click to collapse
Sorry for the double post
dmoses1969 said:
I was able to download profiles while in the trial period. The only problem I had was downloading profiles that had multiple downloads. What version are you using? I am using 1.0.8b2 but I see that b3 is available now.
Click to expand...
Click to collapse
Just switched over to Baked Snack 1.3 after Titanium Backup finishes my restore I will try again and I will let you know. Definitely going to buy this app once my trial is over!
How do you toggle network to check for sms,mms,email every few mins? I can't seem to figure it out.
1wingangel said:
How do you toggle network to check for sms,mms,email every few mins? I can't seem to figure it out.
Click to expand...
Click to collapse
I used this guide on LifeHacker and it works great. Just ignore "requires APNDroid" http://lifehacker.com/5601133/push-...awesome-heights-with-these-tasker-setups#data
• First Profile
Context: Time -> From 23:00 to 05:30.
Tasks: Net -> Mobile Data -> (Keep unchecked). Turning off mobile data
Net -> WiFi -> Set: Off. But don't worry, because we'll turn it back on with our
• Second Profile
Context: Time -> From 23:15 to 05:15 repeating every 15 minutes. Note the displacement 15 minutes "into" the other profile we just created.
Tasks: Net -> WiFi -> Set: Toggle. This means WiFi is alternating on and off every 15 minutes, cutting its overall usage and idle time about 50 percent.
dmoses1969 said:
If you install the latest beta version it will toggle data without using APNdroid. I do not have it installed and it works fine.
Click to expand...
Click to collapse
I bought Tasker just a few minutes ago and the ON/OFF Mobile Data actions do not work with or without APNdroid.
AvatarOfFrost said:
I bought Tasker just a few minutes ago and the ON/OF Mobile Data actions do not work with or without APNdroid.
Click to expand...
Click to collapse
Did you install the latest beta version? http://tasker.dinglisch.net/releases/Tasker.1.0.8b3.apk
How's battery life with this app? I've read it is a hog.
Sent from the void...
AvatarOfFrost said:
I bought Tasker just a few minutes ago and the ON/OFF Mobile Data actions do not work with or without APNdroid.
Click to expand...
Click to collapse
Try copying what I have showing here just to see if data is toggling. I set the delay for data on so that I could actually see the data come on. I didnt believe it was working either until I put the delay in there.
wuclan48 said:
How's battery life with this app? I've read it is a hog.
Sent from the void...
Click to expand...
Click to collapse
My battery life has been noticeably better.
Ya know I tried this earlier after seeing this post and it got a little annoying to figure out, I honestly have been using a program called overclock widget and it has increased my battery by at least double.... and I am running stock rooted with Sprint bloatware removed
I have it setup to turn data off when the screen is off and data on when the screen is on. How can you make it toggle data on and off when the screen is off so you can still get email and stuff?
boredmug said:
I have it setup to turn data off when the screen is off and data on when the screen is on. How can you make it toggle data on and off when the screen is off so you can still get email and stuff?
Click to expand...
Click to collapse
Adjust the time to whatever you want. You can also change it to toggle data instead of wifi
• First Profile
Context: Time -> From 23:00 to 05:30.
Tasks: Net -> Mobile Data -> (Keep unchecked). Turning off mobile data
Net -> WiFi -> Set: Off. But don't worry, because we'll turn it back on with our
• Second Profile
Context: Time -> From 23:15 to 05:15 repeating every 15 minutes. Note the displacement 15 minutes "into" the other profile we just created.
Tasks: Net -> WiFi -> Set: Toggle. This means WiFi is alternating on and off every 15 minutes, cutting its overall usage and idle time about 50 percent.
Didn't see a thread for this so I thought i'd start one.
Anyone use this app to automate? Been using it for a few weeks and love it.
Here are some of the profiles I've created/been using.
- Headset = when inserted, pop up a menu of apps. When removed, kill said apps and mute media volume
- Calender = silent the phone when I am in a meeting (entry = busy)
- Work = Turn down all volume/notifications while i'm at work (730-400, M-F)
- Home = When home, turn on WiFi. When i leave, turn it off
- Power = when charging, pop up a menu for which power mode: night, charge, USB, or Car. Perform tasks depending on which mode is used
- Movies = when at the movie theater, silent completely. Turn volume on when I leave
- Night = Turn on Airplane mode when sleeping, on every 15 minutes to sync in data
Anyone else have any good profiles to share??
I turn on GPS when "My Tracks" is launched...
I created a Task to turn GPS on and then launch Navigation. Then I added a shortcut to that Task w/ the Navigation to icon...
I turn my phone to vibrate when I'm near work networks...
Silence my phone and turn off data-sync from midnight-7.
I've been trying to make a profile that will shut off my WiFi when I go out of range and disconnect, but I can't get it to work properly.
I really don't know why Android will let you keep you WiFi on when you're not connected for an extended period of time.
Tasker
I use a few.
1] Kill 3G, launch wifi when at work or home. Autoconnect.
2] Set security flag when NOT at work or at home
3] If security flag is OFF, PIN is OFF on device boot.
4] On receipt of SMS, play a longish sound so I can find it.
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Now, you might say- why not use a task killer or uninstall it? I thought about that. If i'm not at home or work (within 50meters) all programs that are capable of installing, uninstalling, modding, or killing are PIN locked. NICE!
heliotropeUCSD said:
I use a few.
1] Kill 3G, launch wifi when at work or home. Autoconnect.
2] Set security flag when NOT at work or at home
3] If security flag is OFF, PIN is OFF on device boot.
4] On receipt of SMS, play a longish sound so I can find it.
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Now, you might say- why not use a task killer or uninstall it? I thought about that. If i'm not at home or work (within 50meters) all programs that are capable of installing, uninstalling, modding, or killing are PIN locked. NICE!
Click to expand...
Click to collapse
I like the security flag and locking. Great idea. I'm going to have to try and set that one up.
Currently I,
1. Turn on WiFi at home and off when I leave.
2. Turn off email checking at 11pm and back on at 5am
3. Turn on GPS when Maps is opened.
4. Launch Sirius when headset is plugged in (the only time I use the "headset" is an aux cable into my car stereo.
rmoney said:
I've been trying to make a profile that will shut off my WiFi when I go out of range and disconnect, but I can't get it to work properly.
I really don't know why Android will let you keep you WiFi on when you're not connected for an extended period of time.
Click to expand...
Click to collapse
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
MMBosstones86 said:
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
Click to expand...
Click to collapse
About how long do you have between GPS checks, so that I'll have a rough estimate of what doesn't kill the battery too fast?
Θmega said:
About how long do you have between GPS checks, so that I'll have a rough estimate of what doesn't kill the battery too fast?
Click to expand...
Click to collapse
pretty sure i have it to whatever tasker defaults as. Maybe a minute or two longer. GPS doesn't touch the battery unless its working (you see the satellite). Give it a shot and see how it works. If you don't like it, it can be changed easily
MMBosstones86 said:
you can either use the 'wifi near' profile, or use gps as a location and turn on/off wifi based on that location.
i prefer the gps. the time between checks can be set in tasker as well. I really don't notice the battery kill and keep wifi/gps on while i'm at home...off at work
hope it helps!
Click to expand...
Click to collapse
Yeah I was trying not to use gps, don't care about connecting to WiFi, just don't want it to still be polling for a signal when I forget to turn it off.
rmoney said:
Yeah I was trying not to use gps, don't care about connecting to WiFi, just don't want it to still be polling for a signal when I forget to turn it off.
Click to expand...
Click to collapse
if you use wifi near, it'll turn on wifi to check every few minutes.
gps is set to poll 2 minutes when the screen is on, 10 minutes when screen is off. I find no problems with it on the battery
I know, but I'm not near WiFi often enough to bother connecting. I just want it so that the occasional time I do connect that when I forget to turn it off when I leave the area it doesn't stay on for the next hour till I notice.
heliotropeUCSD said:
5] If I can't find it, different SMS turns off WiFi, turns on GPS and 3G, waits for GPS, and responds to me with location via SMS. Also engages high volume setting.
6] If I don't like where it is, yet another SMS will initiate a lock sequence. This silences all alerts, sets the security flag on, and times out the screen. Then, wakes the device up with a message with my email and a nice request to return, sends me the GPS location again via SMS, and begins to popup a lock screen via Tasker every six seconds. The lock screen can be bypassed, but on reboot the device will require a PIN to access as the security flag will be set.
Click to expand...
Click to collapse
I'm not sure how to set this up. Could you please explain how you did this?
Thanks!
I have a bunch... we need to figure out how to share the code for these...
Quiet night: Silent, wifi off, sets a variable that i am in sleepmode
Sleep mode emergency calls - if sleepmode is no, turns it off and lets it ring only on calls from certain numbers
Meeting silent: silent mode when I am in meetings
Face down silent: ****s it up if i turn it face down
Low battery: notifies me, turnjs off wifi and gps, drops brightness, switches to vibrate
Home: turn off gps, turn on wifi
No Keyguard: turns off keyguard and leaves on display when plugged in
Work: wifi off (security at work), drops volume on everything,
@mianthropic777 - something to note on your low battery profile. Vibrate actually uses much more energy than audible ringers. Might want to switch that one up
rmoney said:
I know, but I'm not near WiFi often enough to bother connecting. I just want it so that the occasional time I do connect that when I forget to turn it off when I leave the area it doesn't stay on for the next hour till I notice.
Click to expand...
Click to collapse
I made a profile to turn wifi off one minute after the phone sleeps. It's an event so the wifi will not turn itself back on. I also made a widget to disable it incase I'm using the wifi to download a file.
how do you make a profile that silences and responds to sms's at movies?
I mean how does it know when you are at a theater?
Can you make a widget to turn this mode on with a touch of the widget?
Thanks
You could easily make a widget to do this for you, or you could set a gps location for your theater to do it automatically.
I've got a few that haven't been mentioned:
- When connected to my home wifi network, keyguard pattern is disabled
- Whenever I answer an incoming call, in-call volume automatically set to 1 (I have some loud obnoxious friends)
- When phone placed face down, switches to vibrate mode and gives me a single short vibrate to confirm. Also screen timeout switched to 7 seconds (shortest possible). Exit task (when phone flipped back up) reverts to whatever ring mode it was in, and gives 2 short vibrates to confirm
- When I launch Pandora, media volume automatically set to 1
Solomente said:
I've got a few that haven't been mentioned:
- When connected to my home wifi network, keyguard pattern is disabled
Click to expand...
Click to collapse
It says keyguard pattern is not available for my phone, why?
(yes I have an Incredible)
I have it set to turn in airplane mode while im in school (high school 8-3) and check for messages every thirty minutes.
Saves the hell out of my battery. I leave around 6:30 in the morning and get home around 7:30 at night...usually have about 40% when I get home.
Sent from my Rooted Froyo Incredible using Tapatalk
I have a few questions.
I tried to make my own Juice Defender replacement:
Data Check -
Contexts:
Time
From 6:30
every 15 min
To 01:00
Power
Any
Inverted
Tasks:
Stop
if %SCREEN ~ ON
Stop
if %CELLSIG < 1
Mobile Data
On
Auto-Sync
On
Wait
2 min
Auto-Sync
Off
Mobile Data
Off
For some reason I can't set an end task, but I think I got around it. What this should do is when my screen is off and I have service it should check for any sort of notifications (facebook, mail), correct? Also, will I still get texts and calls instantly or does Mobile Data include these?
you shouldn't use the wait there as while tasker is waiting those 2 min nothing else can run.
I posted my tasks for this in another thread recently: http://forum.xda-developers.com/showpost.php?p=11097712&postcount=14
Is there anything else I can use instead of wait? I don't really want to make 4 profiles. Also I tried doing something else and it's not working. I attempted to make a Night Mode, however it doesn't turn on:
Nightenable:
Contexts:
From 1:00 Till 6:29
Tasks:
Variable Set %NIGHT, 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Night Mode:
Contexts:
Variable Set %NIGHT, 1
Tasks:
Lower Volume, etc.
why don't you want to use 4 tasks? That's the most ellegant way to do it
for the night mode don't set the variable but set the stuff you want straight away
I would do it in one task except I also have this:
Power Mode:
Contexts:
Power On
Tasks: (Menu)
(Night Mode) Variable Set %NIGHT, 1
(Normal Mode) Variable Set %NIGHT, 0
Vulf said:
I have a few questions.
I tried to make my own Juice Defender replacement:
Data Check -
Contexts:
Time
From 6:30
every 15 min
To 01:00
...
...
For some reason I can't set an end task, but I think I got around it. What this should do is when my screen is off and I have service it should check for any sort of notifications (facebook, mail), correct? Also, will I still get texts and calls instantly or does Mobile Data include these?
Click to expand...
Click to collapse
How I do this:
Profile: Sleep
Time
From 23:00
un-checked
To 05:59
---------------------------------------
Tasks: Sleep
Notification Pulse
OffRinger Volume
5Mobile data
OffWiFi
OffBluetooth
OffAuto-Sync
OffDisplay Brightness
15---------------------------------------
Exit Tasks: Awake
Notification Pulse
OnRinger Volume
15Auto Brightness
On
I utilize a whole other Project with several Profiles to control the Wifi & Mobile Data usage. now working on a BT radio policy
What's your favorite Tasker profile?
Mine are
1. wifi auto off and on depending on which cell tower I'm connected to.
2.automatic screen shade depending on light sensor % bye bye screen filter.
3. media selection popup upon headphone plug in.
4.pocket mode phone screen off and vibrate on when phone put in to pocket headphone jack first.
Feel free to share ideas I just started using it my self and don't know much.
Here is a good read :
http://forum.xda-developers.com/showthread.php?t=1110775
Link to my tasker profiles: https://docs.google.com/folder/d/0B_iZBWQpaR0RLWM1SzItYVZPYWc/edit?usp=sharing
To import add profiles to sdcard/tasker/profiles
Then in tasker long press profiles tab and then import.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
Kind of hard to believe no one has any tasker profiles or ideas
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
1. Silence notifications while I'm sleeping
2. Max volume & brightness when in car dock
3. Auto volume setting when plugging in headphones
It's always interesting to see what others are doing.
1. wifi auto off and on depending on which cell tower I'm connected to.
Click to expand...
Click to collapse
I have that, except, it only disconnects if %WIFI !~ connect*.... prevents dropouts due to intermittent tower signal when I’m connected.
Some other stuff I have:
Battery low warnings: vibrate/notify at 40%, audible/nofify at 30%, 20%, 10% (if silent is off).
Sync newsrob news reader at 3AM every morning (while I’m sleeping). Turns wifi on beforehand and off afterwards. This takes awhile... better to take care of it while I’m sleeping.
Turn on Display Rotation for Apps that needs it (my webbrowser, youtube, etc). On exit task Display rotation is turned off (saves battery to keep it off).
At 10:50AM every morning it pops up a message asking if I want to reboot. If I do not respond, nothing happens. I think it’s good to reboot every once in awhile for general principle and this is a time when I’m likely to have my phone on my desk at work, but not using it. Also reminds me it’s almost lunch time. Also if I tap the widget it sends another text and updates the value on the widget based on response.
At 11:00 AM every morning, it sends a text message to AT&T asking for my data usage for the month. Upon receipt of the message, it is parsed and the result is posted to a widget label on my home screen so I know how much I’ve used this month. Note that 11:00AM central time is a good check, other times of day the info you receive from AT&T may not be up to date.
When data is on I place a permanent notification to remind me that it is on. Notification goes away when data is turned off.
When screen goess off and not back on within a short period, I turn data off (to save data and battery) and turn display rotate off.
Battery % display widget in my dock – update every 5 minutes while screen is on. Color changes depending on level (green 75 – 100%, blue 50-75%, yellow 25-50%, red 0-25%. This also uses Zoom widgets (works nice with Tasker)
Screen Brightness level display in my dock. Tap to pull up menu to change brightness level and adjust mode between manual and auto (auto is also based on Tasker sensing light level). If brightness level is set above 40%, the displayed brightness number turns red and I get a perfmanent notification (so I don’t leave it on high). This also uses Zoom widgets.
Flaghlight widget. Tap to start flashlight. Then it asks me every 30 seconds if I want to leave flashlight on... if no response then it turns flashlight off (prevents forgetting and leaving it on).
Keyguard management. Turns on after a time delay whenever screen goes off away from home. Turns off keyguard whenever I enter key pattern (so I’m either at home in which case it’ll stay on after the first time I enter key pattern, or I’m on the road in which case it’ll turn back off when my screen goes off). Zoom widget has one letter H or A indicating whether my phone thinks I’m home or away (based on cell towers). Zoom widget has another letter H or A indicating how my keyguard is managed currently (home behavior or away behavior). Both letters change together, unless I tap the 2nd A while away to toggle it to H.. That indicates I have disabled keyguard on the road. A red permanent notification also appears. This is an original approach that I conceived/built although I drew ideas from the wiki
Profile which senses when I have a meeting on my calendar and automatically adjust my phone to “vibrate” mode so there will be no noises coming from my phone during meetings. By the way, I also forward all my incoming work emails to my Gmail account, which promptly stuffs them in a special folder. That way 1- I can quickly check incoming work emails from gmail 2 – all outlook meeting invites coming into my work email appear on my gmail calendar which is reflect in my phone calendar and triggers the profile. I actually don’t have a good working pre-meeting 10-minute reminder yet. Gmail’s doesn’t seem to work for me. Maybe I will do that in Tasker when I get a chance. This is a copy of someone else’s idea.
Every night before I go to sleep I press a button tell Tasker I’m going to sleep and in the morning when I get up I press another widget to tel Tasker I’m up. The sleep button sets Display Rotation off, sets wifi off, sets silent mode on, checks if I’m on charger and reminds me to put phone on charger. The awake button sets wifi on, sets silent mode off, syncs my google accounts (synker).
The wakeup task also sends a text message to google asking for weather in my hometown. Upon receipt of response, it populates a zoom widget on my homescreen with the weather/forecast. Also tapping that widget updates the forecast (via text). This is an original that I conceived/built.
For the weather widget and at&t data widget that both receive text messages... upon receipt of appropriate text message I use auto-shortcut to take me to the associated message. That way after I press a single back key, the incoming message notification is cleared. I could press back using built-in Tasker functions which would make it fully automatic, but that requires leaving USB debugging on, which makes me uneasy.
I have an “app” built in tasker that generates a transparent scene over everything else displaying battery level and temperature. Useful in the single situation that you are using navigation in the car and possibly charging.. keeping a close eye on battery level and temperature. This is an original that I conceived/built.
I also have a floating compass that floats over everything else. Useful with Navfree, whose display doesn’t give any clue which direction is north while navigating (the top of the map points in the direction you are traveling which may not be north). Requires SL4a and Python. This is an original that I conceived/built, with help from others on the Tasker google groups to figure out how to get the compass direction in Tasker
I have widgets to remember a parking space and launch Locus Pro to navigate back. Copied from somehwere.
I have profile to take/email photograph from front camera when someone enters the wrong unlock code. Copied from Android forums.
I have a profile to give a small tone whenever a call terminates. That is very helpful if you spend a lot of time on weak connections. You can keep talking after a call is dropped if you dont realize it. And knowing there will be a tone at end of call keeps you from asking "are you still there" during longer than normal pauses in the conversation. Copied from Android Forums. Very useful to me.
I have a widget that tells how many Tasker tasks are currently running. Tapping on it lists the tasks. Usually it doesn’t stay above zero for long. It allows me to recognize if a task has gone haywire. It complements nicely the display of active profiles which are listed in the pulldown notification. This is an original that I conceived/built.
electricpete1 said:
It's always interesting to see what others are doing.
I have that, except, it only disconnects if %WIFI !~ connect*.... prevents dropouts due to intermittent tower signal when I’m connected.
Some other stuff I have:
Battery low warnings: vibrate/notify at 40%, audible/nofify at 30%, 20%, 10% (if silent is off).
Sync newsrob news reader at 3AM every morning (while I’m sleeping). Turns wifi on beforehand and off afterwards. This takes awhile... better to take care of it while I’m sleeping.
Turn on Display Rotation for Apps that needs it (my webbrowser, youtube, etc). On exit task Display rotation is turned off (saves battery to keep it off).
At 10:50AM every morning it pops up a message asking if I want to reboot. If I do not respond, nothing happens. I think it’s good to reboot every once in awhile for general principle and this is a time when I’m likely to have my phone on my desk at work, but not using it. Also reminds me it’s almost lunch time. Also if I tap the widget it sends another text and updates the value on the widget based on response.
At 11:00 AM every morning, it sends a text message to AT&T asking for my data usage for the month. Upon receipt of the message, it is parsed and the result is posted to a widget label on my home screen so I know how much I’ve used this month. Note that 11:00AM central time is a good check, other times of day the info you receive from AT&T may not be up to date.
When data is on I place a permanent notification to remind me that it is on. Notification goes away when data is turned off.
When screen goess off and not back on within a short period, I turn data off (to save data and battery) and turn display rotate off.
Battery % display widget in my dock – update every 5 minutes while screen is on. Color changes depending on level (green 75 – 100%, blue 50-75%, yellow 25-50%, red 0-25%. This also uses Zoom widgets (works nice with Tasker)
Screen Brightness level display in my dock. Tap to pull up menu to change brightness level and adjust mode between manual and auto (auto is also based on Tasker sensing light level). If brightness level is set above 40%, the displayed brightness number turns red and I get a perfmanent notification (so I don’t leave it on high). This also uses Zoom widgets.
Flaghlight widget. Tap to start flashlight. Then it asks me every 30 seconds if I want to leave flashlight on... if no response then it turns flashlight off (prevents forgetting and leaving it on).
Keyguard management. Turns on after a time delay whenever screen goes off away from home. Turns off keyguard whenever I enter key pattern (so I’m either at home in which case it’ll stay on after the first time I enter key pattern, or I’m on the road in which case it’ll turn back off when my screen goes off). Zoom widget has one letter H or A indicating whether my phone thinks I’m home or away (based on cell towers). Zoom widget has another letter H or A indicating how my keyguard is managed currently (home behavior or away behavior). Both letters change together, unless I tap the 2nd A while away to toggle it to H.. That indicates I have disabled keyguard on the road. A red permanent notification also appears. This is an original approach that I conceived/built although I drew ideas from the wiki
Profile which senses when I have a meeting on my calendar and automatically adjust my phone to “vibrate” mode so there will be no noises coming from my phone during meetings. By the way, I also forward all my incoming work emails to my Gmail account, which promptly stuffs them in a special folder. That way 1- I can quickly check incoming work emails from gmail 2 – all outlook meeting invites coming into my work email appear on my gmail calendar which is reflect in my phone calendar and triggers the profile. I actually don’t have a good working pre-meeting 10-minute reminder yet. Gmail’s doesn’t seem to work for me. Maybe I will do that in Tasker when I get a chance. This is a copy of someone else’s idea.
Every night before I go to sleep I press a button tell Tasker I’m going to sleep and in the morning when I get up I press another widget to tel Tasker I’m up. The sleep button sets Display Rotation off, sets wifi off, sets silent mode on, checks if I’m on charger and reminds me to put phone on charger. The awake button sets wifi on, sets silent mode off, syncs my google accounts (synker).
The wakeup task also sends a text message to google asking for weather in my hometown. Upon receipt of response, it populates a zoom widget on my homescreen with the weather/forecast. Also tapping that widget updates the forecast (via text). This is an original that I conceived/built.
For the weather widget and at&t data widget that both receive text messages... upon receipt of appropriate text message I use auto-shortcut to take me to the associated message. That way after I press a single back key, the incoming message notification is cleared. I could press back using built-in Tasker functions which would make it fully automatic, but that requires leaving USB debugging on, which makes me uneasy.
I have an “app” built in tasker that generates a transparent scene over everything else displaying battery level and temperature. Useful in the single situation that you are using navigation in the car and possibly charging.. keeping a close eye on battery level and temperature. This is an original that I conceived/built.
I also have a floating compass that floats over everything else. Useful with Navfree, whose display doesn’t give any clue which direction is north while navigating (the top of the map points in the direction you are traveling which may not be north). Requires SL4a and Python. This is an original that I conceived/built, with help from others on the Tasker google groups to figure out how to get the compass direction in Tasker
I have widgets to remember a parking space and launch Locus Pro to navigate back. Copied from somehwere.
I have profile to take/email photograph from front camera when someone enters the wrong unlock code. Copied from Android forums.
I have a profile to give a small tone whenever a call terminates. That is very helpful if you spend a lot of time on weak connections. You can keep talking after a call is dropped if you dont realize it. And knowing there will be a tone at end of call keeps you from asking "are you still there" during longer than normal pauses in the conversation. Copied from Android Forums. Very useful to me.
I have a widget that tells how many Tasker tasks are currently running. Tapping on it lists the tasks. Usually it doesn’t stay above zero for long. It allows me to recognize if a task has gone haywire. It complements nicely the display of active profiles which are listed in the pulldown notification. This is an original that I conceived/built.
Click to expand...
Click to collapse
All I can say is wow
Would you mind exporting your profiles for download
Sent from my SGH-I997 using xda app-developers app
Thanks. Exporting can be a little tricky for a variety of reasons. We have choice of two formats: human-readible text (which can't import into tasker) and tasker-readable xml (which resembles gibberish to humans). And what I've described encompasses a large number of profiles, tasks, and scenes. Could export a project tab on a few if you'd like. Sometimes importing a project tab causes bizarre conflict of same-named scenes ... at least I've had that experience.
So, if you could identify one or two that you're interested in, I can work on exporting/presenting those.
Meantime, some stuff I've already organized (?) for presentation:
1 - A rambling youtube video. First five minutes is sort of beginners guide to tasker using screen-off / data off profile as example. Next 4 minutes is rambling wander through some of my profiles. Last minute for some reason I decided to show off my holo launcher dock widgets. I did not yet have my tasker/zoom-based widgets for battery% and screen brightness in place yet at the time I made that video.
http://www.youtube.com/watch?v=il5EAKkMgGI
2 - Floating battery monitor (% and temp) - intended to float over top of navigation program while navigating/charging
http://forum.xda-developers.com/showthread.php?t=1890710
By the way I have a new version of that, just haven't posted it there yet. Maybe a good job for someday.
Some general philsophy about Tasker fwiw: A lot of the things I do with tasker can be done with other programs/widgets. But I tend to think it's more efficient to minimize the number of programs in the category of widgets (which is continuously running process) and things that monitor for chage in state. They all use resources. Tasker uses resources as well but if we only use Tasker and Zoom for these types of things I think it's better. And sot of fun (that's probably the real reason). I'd have to say not more efficient in terms of time. For anyone considering buying Tasker I would mention it's not likely you're just going to grab a bunch of profiles and have them easily imported/running. There are often tweaks needed based on phone type and interaction among the various profiles.
Great video
Sent from my SGH-I997 using xda app-developers app
Notification/Ringer Volumes
I just recently picked up a Verizon S4, and I'm trying to figure out how to make tasker "link" my notification volume with my ringer volume, so they will both change using the rocker. Any help?
---------- Post added at 07:42 PM ---------- Previous post was at 07:30 PM ----------
Xxw0lfxX said:
I just recently picked up a Verizon S4, and I'm trying to figure out how to make tasker "link" my notification volume with my ringer volume, so they will both change using the rocker. Any help?
Click to expand...
Click to collapse
Sorry, I wrote this question in the wrong device thread. I didn't notice that when replying from my mobile browser
Sent from my Verizon Wireless Galaxy S4 using Tapatalk 4 beta.
1) I have created a profile that whenever i am sleeping phone goes in smart slient mode, if some vip numbers call my phone is back in ringer mode.
2) during some duration of the day my phone speaks the name of the caller instead of ringing. if not a known caller than it rings.
3) integrated it with LMT launcher and made a profile like double swipe up and all volumes are at max. double swipe down all are at minimum.
4) wave your phone and it takes a screenshot. ( you can change the context to any thing.)
5) if i missed a particular number 5 times in continuity than send him a custom message.
6) Phone says "missed call" at regular interval e.g 30 min
7) Phone says "battery full" when charged, battery low alert when below 20%.
8) Phone says "AC/USB Charging" when plugged in AC and USB respectively. and at removal is says AC|USB removed.
That sounds like a pretty neat setup you have there
Sent from my Verizon Wireless Galaxy S4 using Tapatalk 4 beta.
Inspirational quotes on home screen
I made a tasker profile to show inspirational quotes every hour on home screen.
For this I made a text file containing more than 100 quotes, each seperated by "/" for seperating and identifying an individual quote.
Then picking up any quote randomly and pushing it to "Minimalistic Text" tasker plugin.
For displaying on screen I used "Minimalistic Text".
Profile:
Profile: Insp Quotes
State: Battery Level [ From:20 To:100 ]
Time: From 06:35 Till 22:35
Enter: Insp Quotes // This is the task
Task: Insp Quotes
A1: Perform Task [ Name:Inspiration Stopff Priority:5 Parameter 1 (%par1): Parameter 2 (%par2): Return Value Variable: ]
A2: Wait [ MS:0 Seconds:0 Minutes:0 Hours:1 Days:0 ]
A3: Goto [ Type:Action Number Number:1 Label: ]
Task: Inspiration
A1: Read File [ File:/sdcard/Download/insp.txt To Var:%Insptext ]
A2: Variable Split [ Name:%Insptext Splitter:/ Delete Baseff ]
A3: Variable Set [ Name:%Insprandom To:%Insptext(#) Do Mathsff Appendff ]
A4: Variable Randomize [ Name:%Insptextno Min:1 Max:%Insprandom ]
A5: Variable Set [ Name:%Inspsugg To:%Insptext(%Insptextno) Do Mathsff Appendff ]
A6: Minimalistic Text [ Configuration:insp = %Inspsugg Package:de.devmil.minimaltext Name:Minimalistic Text ]
I hope you will like the idea
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rahul70236 said:
1) I have created a profile that whenever i am sleeping phone goes in smart slient mode, if some vip numbers call my phone is back in ringer mode.
2) during some duration of the day my phone speaks the name of the caller instead of ringing. if not a known caller than it rings.
3) integrated it with LMT launcher and made a profile like double swipe up and all volumes are at max. double swipe down all are at minimum.
4) wave your phone and it takes a screenshot. ( you can change the context to any thing.)
5) if i missed a particular number 5 times in continuity than send him a custom message.
6) Phone says "missed call" at regular interval e.g 30 min
7) Phone says "battery full" when charged, battery low alert when below 20%.
8) Phone says "AC/USB Charging" when plugged in AC and USB respectively. and at removal is says AC|USB removed.
Click to expand...
Click to collapse
Hey,
Some of your profiles soun pretty awesome, is asking too much, for you to export them and share?
Thank you
need some help seeting up car profiles pls!
Hello, need some help setting up the following actions in Tasker. I use a tablet (Android 4.0.4) only for in car use and have some problems setting tasker profiles. It should be something like this:
For state power on (charging any) do the following tasks:
1. Disable keyguard
2. Issue a play command to the media app, only if music is not playing already (will come back why I need this latter on) - now I'm using Media Utilities plugin with Smart play (which should do that but it doesn't ... sometimes it sends the play even if the music is already playing, or will send the play command to the built-in media player instead to JetAudio which is the default set media player in android and in media utilities)
3. Turn GPS on, using now secure settings plugin - works great
4. Turn Bluetooth on - works
For State Power off (not charging any) do the following:
1. Turn keyguard on (enable)
2. Wait 12 seconds
3. IF keyguard on >>>
3.1 Stop media (using tasker built in media actions)
3.2 Disable GPS (secure settings plugin)
3.3 Disable bluetooth
3.4 System Lock
4 END IF
Everything works just great UNTIL ... I go in the car, turn the ignition ON ... the power ON profile starts than when I crank the engine, the car cuts the power to any accesories including car phone charger. The power off profile starts and waits 12 seconds before stoping music, gps, etc.
Than the car starts (before those 12 seconds run up) and the phone charger receives power, and the power on profile comes back. I have a higher priority for the power on profile so, the power off profile is aborted and the power on starts again ... but here the problems start: Either the music is stopped (because another play is issued from the power on profile, and the media app thinks it's pause even with smart play command from media utilities) or the default android player is started and the jet audio it's stopped because the play command is send to the build in media player app.
what I would like is
- a shure tested way for tasker to check if any media it's being played, and if it is, abort the play command (tried %MTRACK with flash but could not set it up to work, got the same problems as above)
- some other ideas how to hack, workaround, create a better flow in my profiles to avoid interruptions in those 10-15 seconds while the tablet's charger is cut off by the car, when the car;s engine starts up.
thank you