Database Info

[GUIDE] End-to-End Desire HD reflashing guide

Here goes. This is my guide on how to take a carrier locked Desire HD - root, reflash and enjoy the many amazing custom ROM mods out there!
I can't claim to being an expert - won't be much use when troubleshooting issues relating to this process - and can take no responsibility for bricked devices. All I want to do here is tell you all what worked for me.
In a nutshell you have three main steps:
[Step 1]
Setup the ADB stuff from google on your PC so you can connect with the phone. This includes the driver setup as the standard one doesn’t seem to work for the Desire HD.
[Step 2]
Downgrade to 1.32 (Android 2.2) so it can be unlocked. You’ll need a gold card for this, which is basically an SD card with some hacked HEX code that gets around carrier restrictions – which you then drop the 1.32 ROM onto and reflash by going into the bootloader (powering up while holding volume down).
[Step 3]
After that you need to do a few steps to unlock the bootloader, then get a custom bootloader and radio, then you can flash new ROMs to your hearts content.
[Important note: During different steps in the process you need to either connect with charge only or disk drive mode – so pay attention to instructions on that one]
Full instructions:
[Step 1]
Get java
http://www.oracle.com/technetwork/java/javase/downloads/jdk-6u26-download-400750.html [Download]
Get ADB setup on your PC
http://dl.google.com/android/android-sdk_r11-windows.zip [Download]
http://wiki.cyanogenmod.com/wiki/Howto:_Install_the_Android_SDK [HowTo]
Get Desire HD driver setup on your PC - the default didn't work for me so I required a custom driver
http://forum.xda-developers.com/showthread.php?t=983615 [Download] Desire HD driver
[Step 2]
Create goldcard (SD card setup to get around carrier based restrictions)
http://android.modaco.com/content/general-discussion/305672/creating-a-goldcard/ [HowTo]
downgrade to 1.32 using gold card SD
http://wiki.cyanogenmod.com/index.php?title=HTC_Desire_HD:_Rooting [HowTo]
[Step 3]
Install ROM manager from the Android market place
https://market.android.com/details?id=com.koushikdutta.rommanager&hl=en [AndroidMarket] ROM Manager
Install Visionary to temproot and then permroot device – from downloadable APK – save to SD card and use Astro file manager to navigate and install from SD card
http://www.addictivetips.com/?attachment_id=44615 [Download] Visionary APK
https://market.android.com/details?id=com.metago.astro [AndroidMarket] Astro File manager
Check whether you really have SU privs using a terminal emulator and typing SU
https://market.android.com/details?id=jackpal.androidterm&feature=related_apps [AndroidMarket] Terminal Emulation test app
temproot then permroot with Visionary
http://www.addictivetips.com/mobile/how-to-permanently-root-htc-desire-hd-complete-guide/ [HowTo]
Use ROM manager to install clockwork mod recovery - this is your custom bootloader
http://www.addictivetips.com/mobile/how-to-install-clockwork-recovery-to-your-android-phone/ [HowTo]
Radio S-OFF (SimUnlock)
http://forum.xda-developers.com/showthread.php?t=857537 [HowTo]
Eng S-OFF HBOOT
http://forum.xda-developers.com/showthread.php?t=855403 [HowTo]
[Optional: Install new radio if ROM recommends it]
http://tinyurl.com/66q2bp2 [Download] recommended Radio for Revolution HD + instructions in ZIP file
Install new ROM using files loaded onto SD card by booting device into custom clockworkmod bootloader. Example below for Revolution HD
http://forum.xda-developers.com/showthread.php?t=840040 [HowTo]
This last step is the one I had trouble with, after you install ROM manager, you open the app and click flash clockworkmod. This is supposed to drop a zip file in the root of the sdcard called update.zip and that is used by the device when rebooting to get into the advanced boot mode. It took me about 20 goes to get this, I had to turn on fast boot, enable a flag for erase recovery settings in the app, and then clear the app cache from the settings menu. Then on the main app click > boot into recovery and it worked like a charm – but you may need to be patient on this one.
> I hope I'm not repeating information or stepping on any toes - my ultimate aim here is to collate all the information I pieced together over the past week. I've learned a lot - haven't had to ask too many questions (but thanks to Koush for some support on ROM Manager).
Let me know if this has helped to deliver some clarity!

it´s already 2 guides. isn´t that enough?

pb_1996 said:
it´s already 2 guides. isn´t that enough?
Click to expand...
Click to collapse
There are tons of great guides out there already yes; but it was tricky for me to navigate through and reference terms I wasn't familiar with. This is a list of the guides I followed and the steps I took.

Might be nice to point out this guide is for Windows users?

Thx for share'ing, nice collection of info and links for newcomers aswell as, for example, ressetted my phone for warranty purpose (unroot, eng-on etc, took about 3 weeks to get my GPS antenna fixed, got it back today) and see this post. You made my day (the drivers, had same prob here, all the needed links), thank you .

pb_1996 said:
it´s already 2 guides. isn´t that enough?
Click to expand...
Click to collapse
There are more than 2 roms in this forum for Desire HD. Aren´t they enough?
I think, it´s good to have some different guides, because for some users it maybe helpful, if they don´t understand some steps, to switch between these guides. He has made this experience and shared it with others. That´s, what a forum is for.

Neo XL said:
There are more than 2 roms in this forum for Desire HD. Aren´t they enough?
I think, it´s good to have some different guides, because for some users it maybe helpful, if they don´t understand some steps, to switch between these guides. He has made this experience and shared it with others. That´s, what a forum is for.
Click to expand...
Click to collapse
Nice response, yes always nice with a different set of eyes on things
Sent from my HTC Desire HD using XDA Premium App

Neo XL said:
There are more than 2 roms in this forum for Desire HD. Aren´t they enough?
I think, it´s good to have some different guides, because for some users it maybe helpful, if they don´t understand some steps, to switch between these guides. He has made this experience and shared it with others. That´s, what a forum is for.
Click to expand...
Click to collapse
But there are at least two different roms, all these how to threads are rehashing the stickied threads.

UPDATE[7/22/12] The Beginners Guide !!! (NOOBS)[ALL IN 1 RESOURCE GUIDE]

Hopefully this will get some attention and help some people out before they dig that treacherous hole that they cant get out of and of course for the ever present (NOOBS) The guys that are brand new to Android and hit the ground running full speed with the itch to do something but just dont know what to do
So with that said before you go junking up the forums asking for help. Do us all a big favor and USE THE SEARCH BUTTON!!!!!! Please read and abide by all the forum rules as this includes duplicate posts as well!! Do a little homework before you get the itchy finger and do something you foolishly shouldn't have! And before you delete something make sure you know what it is. THE SAFEST THING TO DO IS JUST FREEZE IT!!!!
Rules:
http://forum.xda-developers.com/announcement.php?f=1058
Our Mod asking to keep the place clean:
http://forum.xda-developers.com/show....php?t=1337004
** IF YOU ARE HAVING APPS DISAPPEAR, A MESSAGE OF NOT ENOUGH STORAGE SPACE FOR APPS, OR COMPUTER NOT RECOGNIZING THE SD CARD LOOK HERE!! MAKE SURE ALL APPS ARE INSTALED TO INTERNAL MEMORY AND NOT ON THE SD CARD.IF YOU HAVE APPS ON THE SD CARD YOU WILL CONTINUE TO HAVE PROBLEMS!!! THIS PHONE DOESN'T PLAY WELL WITH CERTAIN CLASS 10 SD CARDS, THE SAFEST THING IS TO HAVE A CLASS 6 OR LESS CARD AND MAKE SURE THE CARD IS FORMATTED CORRECTLY!
First I want to thank Swiftks, as I am borrowing a lot of his work from the OG ATRIX forum
Lets start with some basic terminology & general understanding:
What is Root / Rooting?
Put simply, Rooting your device allows you, and/or rooted apps, to access parts of the Linux based Android software that is your OS, and that you would otherwise not be able to access. These tasks can be as simple and beneficial as backing up your system setting, or as complicated as installing custom ROMs, Kernels, etc. (more on this later).
What are Fastboot files or (FXZ) ?
Fastboot files (FXZ),contains a firmware image that can be installed on your device. i.e. they are more of less what you are installing on your device when you do a OTA (over the air) update; except an actual Fastboot file (FXZ) that you download and flash on your own will most of the time not only contain the updated info. in the OTA, but also all the other “stock” info. that came with the device. That’s why when you flash a Fastboot file (FXZ) it will return you to a stock/retail device.
What is ADB?
ADB = Android Debug Bridge. So what this basically is, is a command/terminal based interface you can run from your PC, to interact with your device and its file structure. You can PUSH (install) programs, apps, .apk files, etc. to your device, move things around, set permissions, etc. One of the primary things to remember when trying to use adb, is that you need to enable debugging on your device. In fact it’s a good idea to enable this, and leave it that way… forever! This setting can be found on your device under Settings -> Applications -> Development -> USB debugging
Here is a list of helpful adb commands:
http://android-dls.com/wiki/index.php?title=ADB
What is a ROM?
A rom is like a custom firmware image that is made by a Developer either entirely from scratch, or based off of the official firmware package. Some ROMs contain simple changes like changing icons and adding extra options to things, other more complicated ROMs can change the entire Android experience. Which one you will want to flash, will be entirely up to you. Read carefully, and make sure you understand what you are getting into before you flash.
What is a Kernel?
As a rule of thumb, if you have to ask, you probably shouldn’t be messing with this anyway. But hey, best for you to at least know what it is. A kernel is the heart of the device's OS. In simplest terms it’s a connection between your apps and your device’s hardware; i.e. the processor, RAM, etc. A custom kernel can dramatically change the way your device’s hardware performs… for the better and/or the worse.
**Right now we currently have a LOCKED BOOTLOADER so we can not change Kernal's at this time, IF the Bootloader gets unlocked this WILL change !!
What is a Bootloader?
The bootloader is a program code that is executed before the device OS starts up, and that instructs that device to boot “normally”. The bootloader can come locked or unlocked from the manufacture. A unlocked bootloader will allow you to install custom ROMs & Kernels (as well as some other neat things) on your device.
**Currently our BOOTLOADER IS LOCKED!!! but you can take a look here and join in if ya want to!
http://forum.xda-developers.com/showthread.php?t=1328714
What is a odexed and de-odexed framework, and what is the difference between the two?
Just read this:
http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/
What is CWM Recovery (ClockWorkMod Recovery)?
CWM is a custom recovery program that allows you to backup / restore a full or partial system backup of your device. It also allows you to install flashable .zip files; which is one of the primary installation methods for custom ROMs. It also provides other neat features such as cache wiping, battery reset, and other processes. Long story short, if you are thinking about flashing custom ROMs or just want a really good backup program, incase you FUBAR your device, you need to install this.
What is Fastboot?
Again, just read these for description & helpful Commands:
http://forum.xda-developers.com/showthread.php?t=619153 [Thanks briggie108]
or
http://android-dls.com/wiki/index.php?title=Fastboot
What is all this CM7 stuff about?
CM7 stands for CyanogenMod. It's a very popular ROM, b/c of its built-in options, great enchantments and total removal of manufacture software; i.e. all that MotoBlur stuff on your device is gone. It is a stripped down fast and well designed ROM with a custom kernel, that allows for easy flashing of great custom themes (just check out the General Theme Section for Android on XDA). Only a small selection of Android devices have a "official" release of CM7, however almost all Android devices have a "un-official" port for it.
More info. on CM7 can be found here:
http://www.cyanogenmod.com/
And here:
http://en.wikipedia.org/wiki/CyanogenMod
The #1 rule of CyanogenMod is that you do not ask for timetables!!! You have been warned. If you choose to ignore my warning, ask away and prepare to be blasted until you cry.
SOME RECOMMENDATONS FOR THE FLASHAHOLICS!!
ALWAYS HAVE A BACKUP ON YOUR SD CARD AT ALL TIMES FOR EMERGENCY!!
HERE IS A LIST AND GUIDE THAT WILL HELP YOU OUT AND SAVE YOU A LOT OF HEADACHES!!
GO HERE AND READ THE GUIDE!!
HOW TO FLASH A FXZ:
FXZ Hints, Tricks & Guidelines:
- Always make sure to flash with a full battery! The last thing you want to do is run out of juice in the middle of a FXZ flash; that's a great way to brick your device.
- As a general rule of thumb before flashing a FXZ file to your device, you should always download the FXZ file to a file path on your computer with the least possible spaces (i.e. the shorter the file path to the FXZ file the better). So just download it to the root drive of your computer, such as C:\.
- If you are running Windows on your PC, open RSD Lite as a Administrator. Also, when you open RSD Lite, Instead of browsing for the FXZ file via the normal “…” button in the program, just drag the sbf file onto the file path bar in RSD Lite. Sometimes, the FXZ file will not load when you select it via the browser button in RSD Lite (again I have no idea why).
- Once your FXZ file begins to flash to your device, be patient… the device will re-boot at least a couple times in the flash process. Do not get jumpy and disconnect your device until RSD Lite says you are 100% done! Doing so can cause your device to BRICK! If for some reason you have waited for an inordinate amount of time, and it does not say finished, then ask for help on the thread, before unplugging. The same goes for pulling the battery. DO NOT DO THAT!!! Pulling your battery during a sbf flash, is one sure fire way to brick your device. Only pull the battery as a last resort and only after you have asked for help.
STEPS:
1) Have the correct Motorola drivers installed for your PC (i.e. x32-bit or x64-bit).
Here is the Motorola Driver site
http://www.motorola.com/consumers/v...59431210VgnVCM1000008406b00aRCRD&pubid=987654
2) Download RSD Lite & install on your PC.
Here is the latest version to download (RSD Lite 5.6)
http://forum.xda-developers.com/attachment.php?attachmentid=784077&d=1321414457
3) Choose the FXZ file to download
Android 2.3.5 ---- Blur_Version.55.11.16.MB865.ATT.en.US
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
http://www.fileserve.com/file/erjAuTR/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
or
www.multiupload.com/W3UH3W5LU0
4) Make sure you alternatively boot into AP Fastboot mode by powering down (or pulling battery), then press and hold the volume up and down button while powering on.
5) Plug your phone into a back USB port on your computer.
Front USB ports are often unreliable when it comes to power levels. They should not be used for flashing.
6)Run “RSD Lite” on your computer
7)Press the “. . .” button next to the box labeled “Filename”
8)Browse and open the FXZ file or just just drag the FXZ file onto the file path bar in RSD Lite
9)Wait for the program to read the file, then choose “START”
10) Now, the device will slowly flash the FXZ file. BE PATIENT AS THIS MAY TAKE A WHILE!
11) Congratulations! You’ve restored your ATRIX 2!!
How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
You should be able to use RSD Lite to flash the file.
THANKS TO COGEARY FOR THESE STEPS
How to flash the FXZ once applying the ICS leak, YOUR STUCK ON ICS UNTIL FURTHER NOTICE WE ARE TRYING TO GET A WORKING METHOD OUT BUT UNTIL THEN YOUR STUCK, SO IF YOU DONT TAKE THIS CAUTION SERIOUSLY AND YOU BRICK YOUR PHONE, DONT COME CRYING AND MAKING NEW THREADS ASKING FOR HELP!!! YOU HAVE BEEN WARNED.....!!
HOW TO UNLOCK YOUR BOOTLOADER FOR ANDROID 2.3.5
Still a work in progress but you can take a look here and join in if ya want to!
http://forum.xda-developers.com/showthread.php?t=1328714
HOW TO ROOT YOUR DEVICE
FOR ANDROID 2.3.5
http://forum.xda-developers.com/showpost.php?p=18942700&postcount=1
FOR ANDROID 2.3.6
Install the OTA and upgrade your phone to 2.3.6
Download the 2.3.6 root zip from HERE
Make sure you have the right drivers installed then connect your phone to your PC.
Unzip the file and then double-click "Click-To-Root.bat".
THE FOLLOWING METHODS BELOW FOR MAINTAINING ROOT SHOULD BE NO LONGER A NECESSITY BUT I'M LEAVING THEM FOR REFERENCE IN CASE WE NEED THEM IN THE FUTURE
How to maintain root through any OTA update! THIS MUST BE PERFORMED BEFORE INSTALLING THE UPDATE!!!!
You can use Root Explorer for a copy/paste method DO NOT USE ES FILE EXPLORER!!! or you can use adb push/pull if you prefer the manual way.
Root Explorer copy/paste method - make sure you make system r/w
go to /system/bin/
open in text editor – mount_ext3.sh
add the 3 following lines to the very bottom
chmod 4755 /system/bin/su
chmod 4755 /system/xbin/su
chmod 4755 /system/app/Superuser.apk
ADB Shell Method
1) download the mount_ext3.sh file, .... get it HERE
2) open a command line in the directory you saved the file
3) run the following commands:
adb push mount_ext3.sh /data/local
adb shell
su
cd /data/local
mount -o remount, rw /system
cp ./mount_ext3.sh /system/bin
chown root /system/bin/mount_ext3.sh
chmod 755 /system/bin/mount_ext3.sh
mount -o remount, ro /system
reboot
4) Then run the update
Thanks to Jimbridgman for this version
HOW TO INSTALL CWM RECOVERY
ATRIX 2 BOOTSTRAP
http://forum.xda-developers.com/showpost.php?p=19355021&postcount=1.... everyone send a thanks to Nitroglycerin33 for taking the time to modify this for us
[Safestrap] (STILL A WIP)
http://forum.xda-developers.com/showthread.php?t=1427007
WHAT DO I DO IF MY DEVICE WILL NOT FULLY BOOT??? (i.e. Boot Loop or Soft Brick)
Follow the directions in the FXZ section to get that phone back to operational status
ROMs & Kernels:
ROMS
[ROM] STOCK Deodexed - With 2Themes
http://forum.xda-developers.com/showthread.php?t=1420980
[ROM] Supercharged Atrix
http://forum.xda-developers.com/showthread.php?t=1441397
[ROM] CM9 Barely Alpha (WIP)
http://forum.xda-developers.com/showthread.php?t=1427026
[ROM] Rebel Rom
http://forum.xda-developers.com/showthread.php?t=1543792
[ROM] Atrix Blaze
http://forum.xda-developers.com/showthread.php?t=1550693
[ROM] Romulus & Remus
http://forum.xda-developers.com/showthread.php?t=1686157
[ROM] Lithium
http://forum.xda-developers.com/showthread.php?t=1591790
[ROM] Bullet
http://forum.xda-developers.com/showthread.php?t=1670350
[ROM] Supercharged V2
http://forum.xda-developers.com/showthread.php?t=1648421
[ROM] Sonya V4 AtriXperia
http://forum.xda-developers.com/showthread.php?t=1584505
KERNELS
For future reference
THEMES
[THeme] ICS Blue [THEME][WIP]
http://forum.xda-developers.com/showthread.php?t=1383779
[Theme] Darkened Blur
http://forum.xda-developers.com/showthread.php?t=1332470
OTHER MODS & FIXES
[Mod] Webtop via HDMI without a Dock
http://forum.xda-developers.com/showthread.php?t=1357600
[How to] get full ubuntu and your favorite desktop in webtop
http://forum.xda-developers.com/showthread.php?t=1375042#
[How to] Disable CarrierIQ on the Atrix 2
http://forum.xda-developers.com/showthread.php?t=1402657
[Overclock]
http://forum.xda-developers.com/showthread.php?t=1405964
[MOD by APP] Nebtop - Universal HDMI Webtop hack
http://forum.xda-developers.com/showthread.php?t=1410509
[Reference] List of things that are safe to freeze
http://forum.xda-developers.com/showthread.php?t=1330235
A lot of people don't like the stock camera and have purchased Camera FX Zoom from the market and have had great results
Enable Built In wifi Hotspot
http://forum.xda-developers.com/showthread.php?t=1328588
1% Battery Mod (MUST BE ON STOCK DEODEXED ROM!)
http://forum.xda-developers.com/showthread.php?t=1437712
1% Battery Mod- 6 options
http://forum.xda-developers.com/showthread.php?t=1449631
[MOD] BlurHome Launcher - ICS StYLE
http://forum.xda-developers.com/showthread.php?t=1529488
[MOD] blurhome2.apk UPDATE! 2.3.6 added
http://forum.xda-developers.com/showthread.php?t=1486299
As things progress I will continue to update and if you think I need to add anything send me a PM

very nice... sticky this please

iB4STiD said:
very nice... sticky this please
Click to expand...
Click to collapse
I second this most definitely good job man
Sent from my MB865 using XDA Premium

awww beat me to it hehe I made a link reference too lol after seeing a bunch of similar post

Noobtastic!

Sticky itt.

Great post, this may be a bit preemptive but my first questions are;
What is an FXZ and is it used the same way an sbf is?
What are the recovery options before(if any) and after there is an unlocked bootloader?

Yes, great post. Mods, please sticky this.
Jim
Sent from my MB865 using xda premium

dolph8886 said:
Great post, this may be a bit preemptive but my first questions are;
What is an FXZ and is it used the same way an sbf is?
What are the recovery options before(if any) and after there is an unlocked bootloader?
Click to expand...
Click to collapse
An fxz file is the same as an sbf, and you would use RSD Lite to restore your phone with.
With and without a bootloader unlock CMW will still be the best ways for recovery. The fxz file and rsd is still the only way out of a soft brick and we don't have that just yet.
Jim
Sent from my MB865 using xda premium

Been having several questions regarding the FXZ....editing it now.
Hope that helps!

Stupid Question - Thanks Button?
I see your use the thanks button.... could you point me in the right direction to find it? BTW I really appreciate your guys joint efforts for the A2, have one and cannot wait for the unlocked bootloader and custom roms. Thanks again.

Thanks!!! Exactly what I was looking for!

The link for the fxz is broken just let ya know..least for me it was
Sent from my MB865 using XDA Premium

Got it fixed

another link:
dl.dropbox .com/u/29105592/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip

The link on de-odex and such I'd broken also
Sent from my MB865 using XDA Premium

tried to flash and rsd gets stuck
i tried to flash my atrix 2 with rsd lite, it all goes well until it gets to the "preinstall.img" it just says failed, and stops.
the phone will still boot up but nothing is there except a stock background.
no pull down screen, icons, nothing.
what can i do to get back going?
---------- Post added at 08:52 PM ---------- Previous post was at 08:31 PM ----------
matt99017d said:
i tried to flash my atrix 2 with rsd lite, it all goes well until it gets to the "preinstall.img" it just says failed, and stops.
the phone will still boot up but nothing is there except a stock background.
no pull down screen, icons, nothing.
what can i do to get back going?
Click to expand...
Click to collapse
k i got it to install all the way through, but i still get the same screen.

after doing it several times i tried to install my SIM card and everything came to life.

frycook15 said:
The link on de-odex and such I'd broken also
Sent from my MB865 using XDA Premium
Click to expand...
Click to collapse
Got it repaired and thanks for the extra download link for the FXZ

JRW 28 said:
Hopefully this will get some attention and help some people out before they dig that treacherous hole that they cant get out of and of course for the ever present (NOOBS) The guys that are brand new to Android and hit the ground running full speed with the itch to do something but just dont know what to do
So with that said before you go junking up the forums asking for help. Do us all a big favor and USE THE SEARCH BUTTON!!!!!! Please read and abide by all the forum rules as this includes duplicate posts as well!! Do a little homework before you get the itchy finger and do something you foolishly shouldn't have! And before you delete something make sure you know what it is. THE SAFEST THING TO DO IS JUST FREEZE IT!!!!
Rules:
http://forum.xda-developers.com/announcement.php?f=1058
Our Mod asking to keep the place clean:
http://forum.xda-developers.com/show....php?t=1337004
** IF YOU ARE HAVING APPS DISAPPEAR, A MESSAGE OF NOT ENOUGH STORAGE SPACE FOR APPS, OR COMPUTER NOT RECOGNIZING THE SD CARD LOOK HERE!! MAKE SURE ALL APPS ARE INSTALED TO INTERNAL MEMORY AND NOT ON THE SD CARD.IF YOU HAVE APPS ON THE SD CARD YOU WILL CONTINUE TO HAVE PROBLEMS!!! THIS PHONE DOESN'T PLAY WELL WITH CERTAIN CLASS 10 SD CARDS, THE SAFEST THING IS TO HAVE A CLASS 6 OR LESS CARD AND MAKE SURE THE CARD IS FORMATTED CORRECTLY!
First I want to thank Swiftks, as I am borrowing a lot of his work from the OG ATRIX forum
Lets start with some basic terminology & general understanding:
What is Root / Rooting?
Put simply, Rooting your device allows you, and/or rooted apps, to access parts of the Linux based Android software that is your OS, and that you would otherwise not be able to access. These tasks can be as simple and beneficial as backing up your system setting, or as complicated as installing custom ROMs, Kernels, etc. (more on this later).
What are Fastboot files or (FXZ) ?
Fastboot files (FXZ),contains a firmware image that can be installed on your device. i.e. they are more of less what you are installing on your device when you do a OTA (over the air) update; except an actual Fastboot file (FXZ) that you download and flash on your own will most of the time not only contain the updated info. in the OTA, but also all the other “stock” info. that came with the device. That’s why when you flash a Fastboot file (FXZ) it will return you to a stock/retail device.
What is ADB?
ADB = Android Debug Bridge. So what this basically is, is a command/terminal based interface you can run from your PC, to interact with your device and its file structure. You can PUSH (install) programs, apps, .apk files, etc. to your device, move things around, set permissions, etc. One of the primary things to remember when trying to use adb, is that you need to enable debugging on your device. In fact it’s a good idea to enable this, and leave it that way… forever! This setting can be found on your device under Settings -> Applications -> Development -> USB debugging
Here is a list of helpful adb commands:
http://android-dls.com/wiki/index.php?title=ADB
What is a ROM?
A rom is like a custom firmware image that is made by a Developer either entirely from scratch, or based off of the official firmware package. Some ROMs contain simple changes like changing icons and adding extra options to things, other more complicated ROMs can change the entire Android experience. Which one you will want to flash, will be entirely up to you. Read carefully, and make sure you understand what you are getting into before you flash.
What is a Kernel?
As a rule of thumb, if you have to ask, you probably shouldn’t be messing with this anyway. But hey, best for you to at least know what it is. A kernel is the heart of the device's OS. In simplest terms it’s a connection between your apps and your device’s hardware; i.e. the processor, RAM, etc. A custom kernel can dramatically change the way your device’s hardware performs… for the better and/or the worse.
**Right now we currently have a LOCKED BOOTLOADER so we can not change Kernal's at this time, IF the Bootloader gets unlocked this WILL change !!
What is a Bootloader?
The bootloader is a program code that is executed before the device OS starts up, and that instructs that device to boot “normally”. The bootloader can come locked or unlocked from the manufacture. A unlocked bootloader will allow you to install custom ROMs & Kernels (as well as some other neat things) on your device.
**Currently our BOOTLOADER IS LOCKED!!! but you can take a look here and join in if ya want to!
http://forum.xda-developers.com/showthread.php?t=1328714
What is a odexed and de-odexed framework, and what is the difference between the two?
Just read this:
http://www.addictivetips.com/mobile/what-is-odex-and-deodex-in-android-complete-guide/
What is CWM Recovery (ClockWorkMod Recovery)?
CWM is a custom recovery program that allows you to backup / restore a full or partial system backup of your device. It also allows you to install flashable .zip files; which is one of the primary installation methods for custom ROMs. It also provides other neat features such as cache wiping, battery reset, and other processes. Long story short, if you are thinking about flashing custom ROMs or just want a really good backup program, incase you FUBAR your device, you need to install this.
What is Fastboot?
Again, just read these for description & helpful Commands:
http://forum.xda-developers.com/showthread.php?t=619153 [Thanks briggie108]
or
http://android-dls.com/wiki/index.php?title=Fastboot
What is all this CM7 stuff about?
CM7 stands for CyanogenMod. It's a very popular ROM, b/c of its built-in options, great enchantments and total removal of manufacture software; i.e. all that MotoBlur stuff on your device is gone. It is a stripped down fast and well designed ROM with a custom kernel, that allows for easy flashing of great custom themes (just check out the General Theme Section for Android on XDA). Only a small selection of Android devices have a "official" release of CM7, however almost all Android devices have a "un-official" port for it.
More info. on CM7 can be found here:
http://www.cyanogenmod.com/
And here:
http://en.wikipedia.org/wiki/CyanogenMod
The #1 rule of CyanogenMod is that you do not ask for timetables!!! You have been warned. If you choose to ignore my warning, ask away and prepare to be blasted until you cry.
HOW TO FLASH A FXZ:
FXZ Hints, Tricks & Guidelines:
- Always make sure to flash with a full battery! The last thing you want to do is run out of juice in the middle of a FXZ flash; that's a great way to brick your device.
- As a general rule of thumb before flashing a FXZ file to your device, you should always download the FXZ file to a file path on your computer with the least possible spaces (i.e. the shorter the file path to the FXZ file the better). So just download it to the root drive of your computer, such as C:\.
- If you are running Windows on your PC, open RSD Lite as a Administrator. Also, when you open RSD Lite, Instead of browsing for the FXZ file via the normal “…” button in the program, just drag the sbf file onto the file path bar in RSD Lite. Sometimes, the FXZ file will not load when you select it via the browser button in RSD Lite (again I have no idea why).
- Once your FXZ file begins to flash to your device, be patient… the device will re-boot at least a couple times in the flash process. Do not get jumpy and disconnect your device until RSD Lite says you are 100% done! Doing so can cause your device to BRICK! If for some reason you have waited for an inordinate amount of time, and it does not say finished, then ask for help on the thread, before unplugging. The same goes for pulling the battery. DO NOT DO THAT!!! Pulling your battery during a sbf flash, is one sure fire way to brick your device. Only pull the battery as a last resort and only after you have asked for help.
STEPS:
1) Have the correct Motorola drivers installed for your PC (i.e. x32-bit or x64-bit).
Here is the Motorola Driver site
http://www.motorola.com/consumers/v...59431210VgnVCM1000008406b00aRCRD&pubid=987654
2) Download RSD Lite & install on your PC.
Here is the latest version to download (RSD Lite 5.6)
http://forum.xda-developers.com/attachment.php?attachmentid=784077&d=1321414457
3) Choose the FXZ file to download
Android 2.3.5 ---- Blur_Version.55.11.16.MB865.ATT.en.US
InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip
http://www.filesonic.com/file/e95BAnx/InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip
or
www.multiupload.com/W3UH3W5LU0
4) Make sure you alternatively boot into AP Fastboot mode by powering down (or pulling battery), then press and hold the volume up and down button while powering on.
5) Plug your phone into a back USB port on your computer.
Front USB ports are often unreliable when it comes to power levels. They should not be used for flashing.
6)Run “RSD Lite” on your computer
7)Press the “. . .” button next to the box labeled “Filename”
8)Browse and open the FXZ file or just just drag the FXZ file onto the file path bar in RSD Lite
9)Wait for the program to read the file, then choose “START”
10) Now, the device will slowly flash the FXZ file. BE PATIENT AS THIS MAY TAKE A WHILE!
11) Congratulations! You’ve restored your ATRIX 2!!
HOW TO UNLOCK YOUR BOOTLOADER FOR ANDROID 2.3.5
Still a work in progress but you can take a look here and join in if ya want to!
http://forum.xda-developers.com/showthread.php?t=1328714
HOW TO ROOT YOUR DEVICE ON ANDROID 2.3.5
http://forum.xda-developers.com/showpost.php?p=18942700&postcount=1
as other ways become available I will continue to update.
HOW TO INSTALL CWM RECOVERY
ATRIX 2 BOOTSTRAP
http://forum.xda-developers.com/showpost.php?p=19355021&postcount=1.... everyone send a thanks to Nitroglycerin33 for taking the time to modify this for us
[Safestrap] (STILL A WIP)
http://forum.xda-developers.com/showthread.php?t=1427007
WHAT DO I DO IF MY DEVICE WILL NOT FULLY BOOT??? (i.e. Boot Loop or Soft Brick)
Follow the directions in the FXZ section to get that phone back to operational status
ROMs & Kernels:
For future reference
ROMS
[ROM] STOCK Deodexed - With 2Themes
http://forum.xda-developers.com/showthread.php?t=1420980
[ROM] Supercharged Atrix
http://forum.xda-developers.com/showthread.php?t=1441397
[ROM] CM9 Barely Alpha (WIP)
http://forum.xda-developers.com/showthread.php?t=1427026
KERNELS
For future reference
THEMES
[THeme] ICS Blue [THEME][WIP]
http://forum.xda-developers.com/showthread.php?t=1383779
[Theme] Darkened Blur
http://forum.xda-developers.com/showthread.php?t=1332470
OTHER MODS & FIXES
[Mod] Webtop via HDMI without a Dock
http://forum.xda-developers.com/showthread.php?t=1357600
[How to] get full ubuntu and your favorite desktop in webtop
http://forum.xda-developers.com/showthread.php?t=1375042#
[How to] Disable CarrierIQ on the Atrix 2
http://forum.xda-developers.com/showthread.php?t=1402657
[Overclock]
http://forum.xda-developers.com/showthread.php?t=1405964
[MOD by APP] Nebtop - Universal HDMI Webtop hack
http://forum.xda-developers.com/showthread.php?t=1410509
[Reference] List of things that are safe to freeze
http://forum.xda-developers.com/showthread.php?t=1330235
A lot of people don't like the stock camera and have purchased Camera FX Zoom from the market and have had great results
Enable Built In wifi Hotspot
http://forum.xda-developers.com/showthread.php?t=1328588
1% Battery Mod (MUST BE ON STOCK DEODEXED ROM!)
http://forum.xda-developers.com/showthread.php?t=1437712
As things progress I will continue to update and if you think I need to add anything send me a PM
Click to expand...
Click to collapse
idk what is going on but it rsd lite keeps saying flashed failed
---------- Post added at 01:05 AM ---------- Previous post was at 01:04 AM ----------
help ?? im dumb

Help?

So I'm not new to modding phones but I can't figure this one out. before we would just download open recovery and drop the files in update and bam.. Supposedly this one needs openrecovery.apk? So I downloaded and installed that but it doesn't leave any folders to drop the .zip files in. And it wont even reboot into open recovery...
If someone could give me a step by step tutorial I'd appreciate it. I'm trying to get Miui rom onto this one. I had the Regular Milestone but just got this one in a trade.

Are you talking about Milestone A853 or Milestone XT720? XT720's OpenRecovery is bootstrapped, OpenRecovery.apk is optional (and I don't like it personally), but you do have to install the bootstrap somehow and many people find OpenRecovery.apk to be easier than using the terminal/adb. You can use skrillax_cz's original OpenRecovery (but make sure to follow the XT720 directions for bootstrapping), or use this version:
http://forum.xda-developers.com/showthread.php?p=17130188#post17130188

[Q] Guide on flashing phones?

Guides on flashing phone?
I've watched reverendkj's video on how to flash Dexter 2.2, but it seems like much time has passed and I would like to flash a completely different rom. http://forum.xda-developers.com/showthread.php?t=1519857
(this is my first time flashing)
The instructions mention 'update it in openrecovery' but I don't know how to do that. I understand that these instructions are more for completeness and thus are quite skeletal.
So I got a few questions:
1. It asks me to install 2.1 and then root. My phone has never been flashed before (therefore it is in 2.1), but I have rooted it several months ago, do I have to reinstall 2.1 and then re-root?
2. Does installing OR simply mean copying the contents of the OR folder (~15mb) into the SDcard root?
3. I'm assuming after that step I should copy the ROM into the update folder in OR.
4. How do you start up openrecovery? I mostly just want confirmation on this. What is the button sequence i need to press?
5. How do you install a ROM from OR? Is the procedure exactly the same as the video tutorial for dexter's 2.2?
Thanks for reading this guys, and please, I did not write all these questions down just to be told 'use the search function'. I have used, and I am just asking confirmation.

nightingaie said:
Guides on flashing phone?
I've watched reverendkj's video on how to flash Dexter 2.2, but it seems like much time has passed and I would like to flash a completely different rom. http://forum.xda-developers.com/showthread.php?t=1519857
(this is my first time flashing)
The instructions mention 'update it in openrecovery' but I don't know how to do that. I understand that these instructions are more for completeness and thus are quite skeletal.
So I got a few questions:
1. It asks me to install 2.1 and then root. My phone has never been flashed before (therefore it is in 2.1), but I have rooted it several months ago, do I have to reinstall 2.1 and then re-root?
2. Does installing OR simply mean copying the contents of the OR folder (~15mb) into the SDcard root?
3. I'm assuming after that step I should copy the ROM into the update folder in OR.
4. How do you start up openrecovery? I mostly just want confirmation on this. What is the button sequence i need to press?
5. How do you install a ROM from OR? Is the procedure exactly the same as the video tutorial for dexter's 2.2?
Thanks for reading this guys, and please, I did not write all these questions down just to be told 'use the search function'. I have used, and I am just asking confirmation.
Click to expand...
Click to collapse
1. No, you can pick up after the rooting step.
2. No. There is an apk to install open recovery though (In this thread) or follow the instructions at Mod My Mobile
3. Yes
4. If the Open Recovery hijack is installed (& the required files are on the sdcard) hold in the volume up while powering on the phone.
5. This video might be more suitable to flashing a ROM as an update.zip

Successful Root Method for the Pantech Flex P8010

This guide assumes that you are on a stock Pantech Flex P8010 running either ICS (v4.0.4). or the updated JB (v4.1.2) Please note that rooting a ICS phone has been known to cause issues when trying to run the over the air update. If you have already rooted and are looking for a way to update to JellyBean please skip to the section on updating, if this isn't you keep reading.
So at this point you have decided to continue. You shouldn't run into any issues if you follow the directions and you shouldn't mess your phone up even if root doesn't take. However, in the spirit of covering ones back side....
I am not responsible for anything that goes wrong.
Jelly Bean 4.1.2 or ICS 4.0.4
This method was found by LuneBear and has not been tested by myself so I cannot personally verify its effectiveness. I did check and it seems to work with both ICS and JB but your mileage may vary. You will need to download SRSroot and install it on a Windows machine.
SRS ROOT
SRS Homepage
Make sure that USB debugging is enabled on your phone. Connect your phone via USB and run the program. Select the button for all root methods. Then you will need to select the Legolas exploit. Once everything is done (may take some time) just reboot the phone and you should be good to go.
Ice Cream Sandwich 4.0.4 ONLY
Windows Option
This method has been tried on a number of Windows versions and some work some don't so your mileage may very. This method uses Bin4ry's Root method and was orgnially discovered by aaki_rocker and is WAY LESS COMPLICATED. However please note that some users have had issues using this method with Bin4ry's latest version of the root script. It is recommended that you download an older version if you run into any issues or the root doesn't take.
First lets get some drivers on your Windows box. To do this you will need to download the Pantech PC Suite and install it.
http://c724062.r62.cf2.rackcdn.com/PantechPCSuite_1.1.1.3437.exe
Next you will need to download and extract Bin4ry's root script.
http://ul.to/z7krermj
Once you have these two files you will need to plug your phone into the PC via USB and enable the USB type as Data Mode.
Next run the Bin4ry's script and follow the directions when in doubt about what to choose select the simplest option in all cases.
If everything goes well you will have a nicely rooted phone.
Linux Option
This is not a point and click root and is not for the faint of heart. This method of rooting is based off of Bin4ry's root for ICS/JB. Changes have been made to the srcipt to allow it to work with the Flex please follow the steps below and you will have root in just a few minutes. It will probably take you longer to download the files you need than to actually root the phone.
This method has been performed successfully using Ubuntu 12.10 64bit it may work with other versions of linux but it will not work with Windows due to the driver issues and the fact that I didn't alter the windows batch file, in fact I removed any windows related files from Bin4ry's original package.
First you will need to set up the linux machine if you don't already have it. This can be done in one of a few ways you can run a live copy using a Live CD/USB boot (this will not install linux on your computer unless you tell it to) or you can install it in the standard manner or using WUBI, the third option us setting up linux in a virtual machine. If you don't know how to do this google it, there is a wealth of information out there on these subjects and probably some you can even understand without a degree in astro-physics.
Second you will need to set your phone up so that USB debug mode is turned on [settings>developer options]. Make sure you phone isnt plugged into the USB or it won't let you change the setting.
Now plug your phone into to the (linux) computer with the USB. Next you will need to set the USB computer connection type to Media Device(MTP)
In order for the computer to communicate with the phone we will need to install Android Debug Bridge (ADB) and create a couple of files.
These files will basically trick the computer into thinking it has actual drivers for the phone.
Open a terminal window, and enter the following (this will install ADB):
sudo apt-get install android-tools-adb​
Once this is done enter the following
sudo gedit /etc/udev/rules.d/70-android.rules​
Gedit will open at this point copy the the following into it and then click save and close the window.
SUBSYSTEMS=="usb", ATTRS{idVendor}=="10a9:6055", MODE="0666"​
In the terminal window enter this (yeah I know it looks the same just go with it)
sudo gedit /lib/udev/rules.d/70-android.rules​
After the window opens paste the same line of code into the file that you did in the previous files, save and close.
Test your connection by issuing the following command in the terminal window:
adb devices​
Should see something similar to:
OSCAR01111112010204 device​
Your adb is now recognizing your phone and you can now move on to the next step if you are not getting this don't even bother moving to the next step it wont work. If you don't see this check your settings and go again.
Ok so you are now ready to actually root the phone. The first thing your going to need to do is download my modified Bin4ry script. See the attached file.
After you have it downloaded you will need to extract it you can do this by opening the file manager (click on the home folder icon) and going to download. Find the file called Root_Flex.zip. Right click on it and select EXTRACT HERE. After its done extracting you should see a directory called Root_Flex. In a terminal windows enter the following:
cd Downloads/Root_Flex​
Your prompt should now look something like
[email protected]_name~/Downloads/Root_Flex$​
From here just enter the command:
bash RunMeFlex.sh​
At this point you should see a bunch of junk come up and a menu asking which way you want to try to root. Type 1 and press enter. It will give you 3 errors, ignore them. It should copy a bunch of files and ask you to press restore on your phone, do it. It should ask you to press Enter to reboot the phone, do so and the phone will reboot. It should be waiting on you to press enter again dont press enter until the phone is completely rebooted and for good measure give it an extra few seconds. The script should finish and the phone will reboot again this time you should see a little box with an update appear on the phone. At this point you should be rooted. If not try the script again.
I hope this helps out a lot of folks out there. Let me know if I need to change anything in this How to or if I made any mistakes along the way.
Updating If you're already rooted
So you rooted your phone and now you want JellyBean but when you run the update you get the dead droid image and the update fails OR you live in an area that isn't covered by AT&T and you want the update, what do you do? Well thanks to some hard work by Attn1 we have a solution and its pretty simple. First off you will need to have CWM running on the phone. Now there are a few ways to go about this but the method I used was here:
http://forum.xda-developers.com/showthread.php?t=2133857
You only need to go as far as getting CWM up an running on the phone you do not need to install it as the the update by Attn1 will take care of a full install of a better version. You will need to have a copy of Fastboot.exe and some img files. Below is a rar file that has all the necessary files to get CWM running (not installed) on the phone using windows (sorry I don't have the linux files for this one). Just unpack them into a convienent folder somewhere and follow the instructions on the link above.
http://tinyurl.com/oa2p48f
I recommend using the boot_external.img but if you do not have an external SD card and only have the internal storage just use boot_internal.img instead. This method relys on you being able to get into fast boot. If you do not have access to fastboot for what ever reason I suggest you jump ahead in the thread and read Attn1 methods for installing CWM:
http://forum.xda-developers.com/showthread.php?t=2008888&page=44
Next get the update files from this link (second post)
http://forum.xda-developers.com/showthread.php?t=2008888&page=47
Once you have all the files downloaded and copied everything to the appropriate SD cards on your phone your ready to go. If you don't know how to do this don't even think about anything else till you learn this. After this is all done follow the directions below (copied from Attn1's post)
Procedure if you ARE NOT running baseband JYUS06032013 (ICS Basebands) :
boot ICS CWM
flash FLEX-JB-JYUS06032013-FIRMWARE.zip from CWM
format system in CWM (will NOT wipe data, but makes sure old rom does not flash back stock recovery)
restart start recovery/adb reboot recovery (JB CWM is installed - do not try to fastboot boot ICS CWM)
flash FLEX-JB-JYUS06032013-ROM.zip from CWM.
reboot
Procedure if you ARE running baseband JYUS06032013 (JB Baseband) :
get root (Instructions HERE - use GANDALF)
install CWM (Instructions HERE)
flash FLEX-JB-JYUS06032013-FIRMWARE.zip from CWM
format system in CWM (will NOT wipe data, but makes sure old rom does not flash back stock recovery)
reboot to CWM
flash FLEX-JB-JYUS06032013-ROM.zip from CWM.
reboot
This ROM is Pantech stock with no mods other than CWM installation protection and all stock permissions and symlinks carefully maintained and consistent with the product of a successful OTA.
The firmware is also stock, with the exception of the open aboot allowing fastboot boot <bootimage>, and installation of JB CWM with nothing else added or changed. It runs well with nothing broken. You MUST be on JB firmware (below) to run it properly.
You can let the new CWM root it if you like when you exit - it will prompt you. It will also prompt you to disable CWM on reboot make sure this gets disabled or the phone will keep booting to CWM rather than the ROM.
Downloads:
md5: 1a0ca5f177bce2f4c428931616e0ecd1 FLEX-JB-JYUS06032013-FIRMWARE.zip
md5: 17c0e611ab6dfbca230571c1e40f3d14 FLEX-JB-JYUS06032013-ROM.zip
Make sure you check the md5sum on the files before you flash them if there wrong download them again this is vital.
If you need a program to check md5sums copy this .exe file to your c:\windows\system\ and run it from the command line.
http://tinyurl.com/l74wl9q
Thanks go to Bin4ry for the original script and all the technical help provided.
Check out the thread and give a thanks and donate a few bucks if you can.
http://forum.xda-developers.com/showthread.php?t=1886460
Thanks to Atadres for getting me going in the right direction and help testing along the way.
Thanks to Esau Silva for this post that helped get the drivers working for us in Ubutnu.
http://esausilva.com/2010/05/13/setting-up-adbusb-drivers-for-android-devices-in-linux-ubuntu/
Thanks to Aaki_rocker for coming up with the Windows version of this root method you can find his original post here.
http://forum.xda-developers.com/showthread.php?t=2141538
Thanks to LuneBear for finding the root method for JellyBean.
Thanks to Attn1 for the JellyBean update and CM 10.2 version of CWM Recovery.

jist a quick memo guys when you issue the command adb devices please cd to proper android sdk platform tools folder or else youll get an error like no command did you mean..... heres the proper way do this step before you do the adb devices step type in cd ~/android-sdk-linux/platform-tools press enter then type in ./adb devices
i am now trying to contact team win for help with porting the recovery image team win recovery so we can start roming this device and adding ports and roms

atadres said:
jist a quick memo guys when you issue the command adb devices please cd to proper android sdk platform tools folder or else youll get an error like no command did you mean..... heres the proper way do this step before you do the adb devices step type in cd ~/android-sdk-linux/platform-tools press enter then type in ./adb devices....
Click to expand...
Click to collapse
Acutally this assumes you are on a completely fresh install and did not have adb installed through the platform tools if that is the case everything I typed up will work. However you are correct too. Let me know if you think I should go ahead and rework the stuff to be a little more universal if so please PM me an update of the commands.

your right my apologies but one thing i noticed that i would like to say idk if its my experiance or universal after successfully rooting the flex the lockscreen fails to resize itself leaving a black space where the onscreen dock is usualy located no big issue though and the rooting was easy and painless once adb was set up correctly 100000+ points thanks so much

Good job guys. Respect! I have a Pantech Flex, which is an awesome device with the same specs (things that matter to me) as S3, but without big name. I like Pantech Flex because it's size is much better for me than.
The only thing now is to create a ROM! Is it difficult to make a pure Android ROM? Nothing additional, just a pure Android like in Nexus?
Again, thank you guys for your dedication! I'll definitely donate as soon as I have Jelly Bean loaded on my Pantech Flex!

Thanks, this worked great. I am gonna start on a ROM. Hope I don't get bricked.
Sent from the new Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?

HighCommander540 said:
Thanks, this worked great. I am gonna start on a ROM. Hope I don't get bricked.
Sent from the new Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?
Click to expand...
Click to collapse
lets not get ahead of ourselves here guys in order to create a rom we would need to get a custom recovery on our phone this can be achived by mapping out the devices bootloader extracting an img file of it and using koushes clockworks mod recovery creator only when we achive a port of a custom recovery can we make roms and be able to flash them if any of you have knowledge of this as i am a noob when it comes to recoveries pleasae feel free to input we need all the help we can get guys
---------- Post added at 02:03 PM ---------- Previous post was at 01:58 PM ----------
ivansana said:
Good job guys. Respect! I have a Pantech Flex, which is an awesome device with the same specs (things that matter to me) as S3, but without big name. I like Pantech Flex because it's size is much better for me than.
The only thing now is to create a ROM! Is it difficult to make a pure Android ROM? Nothing additional, just a pure Android like in Nexus?
Again, thank you guys for your dedication! I'll definitely donate as soon as I have Jelly Bean loaded on my Pantech Flex!
Click to expand...
Click to collapse
lol right now we need knowledge donations unfourtunatly we cannot start working on roms till we have a custom recovery ported over either team win or clockworks mod recovery this will take a little bit of time and knowledge and to answer your question about the stock nexus rom your talking along the terms of a cynaogen mod port? or akop port looking into it i would say untill we have mapped the bootloader we wouldnt know how diffcult it would be because the simlinks maybe difcult for a phone that has not yet caught fire in the dev world

i wish i had the time to do a recovery myself and get cwm working but with my family and my fulltime job i barely get any time. Im going to spend all my time on this amazing little phone to do what i can. props to the root method it worked flawlessly!!!
Sent from my PantechP8010 using Tapatalk 2

Awesome I'm glad im getting some good feed back on the root. I wasnt sure if I did the rightup correctly and im glad its working out for everyone.
If I get some time I will start looking into a custom CWM and all that junk I have a contact that should be a pretty good help in this just have to find the time to do it.

Yeah after coming from the LG Nitro HD I was surprised at how easy this was to root.
If you want to get together on gtalk we can work on this together. Right now I'm in the process of getting a ROM dump so we can recover our phones from stock images if we happen to mess them up, which I'm sure we will, but that's the best part! Lol.
I can smell CM9 and CM10 calling to this phone!!!
Sent from my PantechP8010 using Tapatalk 2

jSterling said:
Yeah after coming from the LG Nitro HD I was surprised at how easy this was to root.
If you want to get together on gtalk we can work on this together. Right now I'm in the process of getting a ROM dump so we can recover our phones from stock images if we happen to mess them up, which I'm sure we will, but that's the best part! Lol.
I can smell CM9 and CM10 calling to this phone!!!
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I love this phone but I have to say the Pantech launcher kinda pisses me off.

donavan01 said:
Yeah I love this phone but I have to say the Pantech launcher kinda pisses me off.
Click to expand...
Click to collapse
Agreed lol im using nova

I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2

jSterling said:
I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
I had launcher pro and hated it ... check out APEX seems like the stock ICS but with a lot of extras and without the annoying bits of the pantech that make me insane

donavan01 said:
I had launcher pro and hated it ... check out APEX seems like the stock ICS but with a lot of extras and without the annoying bits of the pantech that make me insane
Click to expand...
Click to collapse
hey guys... is there a pantech flex forum????????
also is it possible to unlock the device if you forget the log in pattern????? thanks

I don't know anything about mapping the device. So I am just going to work on a ROM for my infuse.
I will help with anything for testing. A stock image would be awesome. =-)
No flex forum yet.
_______
Sent from the new rooted Pantech Flex. Nominated best lowest priced new smartphone. U jelly I paid nothing, for a phone almost as good as the Galaxy S3?

jSterling said:
I actually don't mind the launcher, its pretty nice compared to other brand launchers. I'm probably going to try launcher pro though that's been my favorite sense I had my prepaid optimus V
Sent from my PantechP8010 using Tapatalk 2
Click to expand...
Click to collapse
sense is my fav launcher and no no forum yet ive requested and gotten no reply smh

did this thread die guys?

atadres said:
did this thread die guys?
Click to expand...
Click to collapse
Wait till after Xmas I bet you a lot of people will get this phone as presents.

donavan01 said:
Wait till after Xmas I bet you a lot of people will get this phone as presents.
Click to expand...
Click to collapse
Yeah I can see that happening. This weekend I am going to work on it to see what I can come up with. I've been so swamped with work and life bs that I haven't had a chance.
No this thread didn't die.
Sent from my PantechP8010 using Tapatalk 2