how to make my camera+video work on cm9 - General Questions and Answers

hey friends,I have a Samsung Galaxy Ace GT-S5830 rooted running on ICS(4.0.4) CM9 RC1.My phone's camera is working only if I i turn my phone in 270 degree angle. Plus the camera which is pre-installed gives very poor quality pictures and I cannot change its settings and cannot turn on-off the flash,even I installed ics camera to try to fix this but it shows a error 'cannot connect to camera' everytime and force-closes.I even cannot take any videos.I read the forums on XDA that can help to fix camera,but none of them worked.I installed an patch update for camera from maclaw's website,but instead it got hanged on the samsung logo.I tried to flash nandroid backup but it showed error after 60% installation...so i flashed CM9 again. I want my camera back but for that I have to go back to stock rom.I'm not used to odin so i feel very awkward,and which is the only way to go back to stock.....Please tell me solution to this problem....should I go back to stock or is there any Patch available....please if you know help me...

Head to the galaxy ace subforum and post in the cm9 gerenal thread, i think cm9 already has a working cam.
Install the latest build, maybe wayland's.

I'm not going to stock again,instead I'M thinking of flashing 'Beats With Smooth Sense' ,is it a good ROM? what are the defects of this ROM?If someone know about it please tell me.....!!!

Lol this is general Q/A ask here http://forum.xda-developers.com/forumdisplay.php?f=1623

Hey, I got my stock ROM with the Extension ' .zip' from the site 'http://acetips.wordpress.com/roms-wiki/ . Do I need to flash through ODIN or I can flash through CWM?

Related

[Q] if we did the ota why cant we flash back to froyo?

Sorry newbie? I know. I'm used to the g1. So I never rooted the g2x used the LG updater to upgrade, which is ok some flaws like my camera does not work at all I've rebooted factory reset wiped camera app data. Nothing works so I used nvflash first time got cwm n flashed the rooted zip. Camera still broken. I know I can flash cm n I'll be fine but y is it not possible to flash a stock rom n stock recovery wouldn't that downgrade? ?? Again Sry for the long post n ? And thanks.
Wow. As a fellow former G1 user, I say, welcome annnnd please feel free to by more coherent in your next thread. Lol.
So, are you asking if there is a rooted froyo rom?
if you would have rooted before the update you could have made a nandroid of your rooted froyo rom and just reinstalled that... I am currently on a rooted stock froyo rom(going to Montery and wanted the LG camera to take panoramic pics ). Eh, live and learn.
Also, have you tried a different camera app like camera zoom off something like that?
Sent from my butt using XDA Premium App
sorry :/ and now i never rooted intil after the update to gingerbread, so i was wondering if there was a way back to stock 2.2 so i could get the ota or is really the same as the one from the lg tool?
south69_dallas said:
Sorry newbie? I know. I'm used to the g1. So I never rooted the g2x used the LG updater to upgrade, which is ok some flaws like my camera does not work at all I've rebooted factory reset wiped camera app data. Nothing works so I used nvflash first time got cwm n flashed the rooted zip. Camera still broken. I know I can flash cm n I'll be fine but y is it not possible to flash a stock rom n stock recovery wouldn't that downgrade? ?? Again Sry for the long post n ? And thanks.
Click to expand...
Click to collapse
Try booting into cwr and fixing the permissions. Some apps like the camera could start force closing due to UID mismatch after flashing a new rom. I had a similar issue with Juicedefender after flashing.

[Q] S3 Camera Breaks Upon Installing Custom ROM

I have had Bean's Jelly 'Beans' ROM installed on my GS3 since I first got the phone in October. Verizon had to replace my phone this past week, and once I received the new one, I did the customary procedure of rooting it and installing a custom ROM. However, after I install a ROM, the Camera always breaks (I get the message "Camera Failed" and the camera screen is black when I open the stock camera app).
I have already researched the issue, and it seems there is a history of some S3's coming out of the box with a broken camera, but it is important to note that the camera works fine as long as I revert back to the stock (and rooted) rom. When installing the Jelly 'Beans' ROM, I have selected 4 different kernel options(Beans custom stock, imoseyon lean kernel, ktoonsez, and faux kernel), thinking that may be the issue, but each one still leaves a broken camera. I have also tried installing an aftermarket camera app, in case the S3 camera apk is somehow broken, and have flashed the Photosphere Camera. Nothing will get the camera to work (and yes, my battery is fully charged).
Not being able to install a custom ROM is a pretty big deal to me, and not having a working camera is a deal breaker. Unfortunately, I won't be able to get Verizon to replace the phone again since it all works on the stock ROM. Does anyone have any ideas? I have tried several things I have read in the forums, but nothing has worked so far. Thank you all in advance for your help!
tfc87 said:
I have had Bean's Jelly 'Beans' ROM installed on my GS3 since I first got the phone in October. Verizon had to replace my phone this past week, and once I received the new one, I did the customary procedure of rooting it and installing a custom ROM. However, after I install a ROM, the Camera always breaks (I get the message "Camera Failed" and the camera screen is black when I open the stock camera app).
I have already researched the issue, and it seems there is a history of some S3's coming out of the box with a broken camera, but it is important to note that the camera works fine as long as I revert back to the stock (and rooted) rom. When installing the Jelly 'Beans' ROM, I have selected 4 different kernel options(Beans custom stock, imoseyon lean kernel, ktoonsez, and faux kernel), thinking that may be the issue, but each one still leaves a broken camera. I have also tried installing an aftermarket camera app, in case the S3 camera apk is somehow broken, and have flashed the Photosphere Camera. Nothing will get the camera to work (and yes, my battery is fully charged).
Not being able to install a custom ROM is a pretty big deal to me, and not having a working camera is a deal breaker. Unfortunately, I won't be able to get Verizon to replace the phone again since it all works on the stock ROM. Does anyone have any ideas? I have tried several things I have read in the forums, but nothing has worked so far. Thank you all in advance for your help!
Click to expand...
Click to collapse
I'm going to go ahead and help myself out and respond to my own question. Upon even further research (yes, I know everyone says people don't look hard enough), I believe the issue relates to the Firmware version. Supposedly the newest firmware breaks the camera unless it's on the stock rom. There are modified firmwares out there that change the part that breaks the camera, but I believe I am going to downgrade the modem and all from what was pre-installed and see if it works.
tfc87 said:
I'm going to go ahead and help myself out and respond to my own question. Upon even further research (yes, I know everyone says people don't look hard enough), I believe the issue relates to the Firmware version. Supposedly the newest firmware breaks the camera unless it's on the stock rom. There are modified firmwares out there that change the part that breaks the camera, but I believe I am going to downgrade the modem and all from what was pre-installed and see if it works.
Click to expand...
Click to collapse
if its a custom Rom (Stock but maby some extras such as overclocking or somethin) they are Sometimes Broken They will try to fix it sometimes, upgrading to a higher android version it is sometimes is Quite hard to Fix everything.
Trozzul said:
if its a custom Rom (Stock but maby some extras such as overclocking or somethin) they are Sometimes Broken They will try to fix it sometimes, upgrading to a higher android version it is sometimes is Quite hard to Fix everything.
Click to expand...
Click to collapse
I downgraded the firmware to VRBMB1 and went back to that custom rom and the camera works flawlessly. I read in the firmware forum that the new firmware is doing this to a lot of people...I just happened to have one of the phones that came with it pre-installed. Problem solved and hopefully this post will help someone out...if not...it helped myself out at least.
tfc87 said:
I downgraded the firmware to VRBMB1 and went back to that custom rom and the camera works flawlessly. I read in the firmware forum that the new firmware is doing this to a lot of people...I just happened to have one of the phones that came with it pre-installed. Problem solved and hopefully this post will help someone out...if not...it helped myself out at least.
Click to expand...
Click to collapse
maby just wait till next firmware and they will fix it?
Trozzul said:
maby just wait till next firmware and they will fix it?
Click to expand...
Click to collapse
Yeah I'm sure it will be fixed. Either way, I don't recommend that newest firmware...signal seems to be the worst out of all of the ones I've tried...for me at least. Seems to be a lot of complaints out there with it anyways.
Similiar issue?
I am having a similiar issue with my US Cell GS3. I bought the donor version of mskip's Samsung Galaxy S3 Unified Toolkit and rooted my device yesterday now my camera is doing the same thing...fires up to a black screen, hangs a few seconds then says camera failed. I'm running Android 4.1.2, build R530UVXAMD4. I've read in a few places that I may have to either downgrade my kernel or flash with some sort of alternate firmware.
Any assistance provided is greatly appreciated!
Sterling8356 said:
I am having a similiar issue with my US Cell GS3. I bought the donor version of mskip's Samsung Galaxy S3 Unified Toolkit and rooted my device yesterday now my camera is doing the same thing...fires up to a black screen, hangs a few seconds then says camera failed. I'm running Android 4.1.2, build R530UVXAMD4. I've read in a few places that I may have to either downgrade my kernel or flash with some sort of alternate firmware.
Any assistance provided is greatly appreciated!
Click to expand...
Click to collapse
did you figure this out?
im having same problem
I had the same problem while flashing one of my friend's S3...i just did the whole process once again..and everything works fine
Sent from my Galaxy Note II using xda premium
tfc87 said:
I have had Bean's Jelly 'Beans' ROM installed on my GS3 since I first got the phone in October. Verizon had to replace my phone this past week, and once I received the new one, I did the customary procedure of rooting it and installing a custom ROM. However, after I install a ROM, the Camera always breaks (I get the message "Camera Failed" and the camera screen is black when I open the stock camera app).
I have already researched the issue, and it seems there is a history of some S3's coming out of the box with a broken camera, but it is important to note that the camera works fine as long as I revert back to the stock (and rooted) rom. When installing the Jelly 'Beans' ROM, I have selected 4 different kernel options(Beans custom stock, imoseyon lean kernel, ktoonsez, and faux kernel), thinking that may be the issue, but each one still leaves a broken camera. I have also tried installing an aftermarket camera app, in case the S3 camera apk is somehow broken, and have flashed the Photosphere Camera. Nothing will get the camera to work (and yes, my battery is fully charged).
Not being able to install a custom ROM is a pretty big deal to me, and not having a working camera is a deal breaker. Unfortunately, I won't be able to get Verizon to replace the phone again since it all works on the stock ROM. Does anyone have any ideas? I have tried several things I have read in the forums, but nothing has worked so far. Thank you all in advance for your help!
Click to expand...
Click to collapse
I have had the same problem when I installed a certain custom rom (can't remember the name ) on my s3. But later I found that during installation of the rom, there was an option to choose one of four kernels, and if I chose Boeffla kernel (included in the options) my camera wouldn't work. So I just reverted back to the stock kernel and walah! My camera works again.

[Q] Help i'm a noob and need help please!

Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help I can't seem to find a working link for CWM-UXKG3-rooted-de-odexed-update-v2.zip maybe if I install the cwm the light neon blue screen will go away?
crayzze said:
Hello I rooted my i997r infuse rogers but the com# in oden was in the wrong box and it saied succesful /failed one but I didn't think much of it I was so exited that it worked I upgraded from 2.3.3 to 2.3.6 AT&T firmware thinking i have to in order to install ics I then installed cms 10 J.B 4.3 my phones runs great better than ever before execpt for the fact that my screen takes about one minute to turn on with lines I think its called rainbowing im not sure I think it has something to do with my original root that messed up my screen so I want to downgrade to stock using odin and reinstall and hopefully my screen won't be messed up so I used http://forum.xda-developers.com/showthread.php?t=1193927 it was successful I used the Odin_UXKG3_rooted_no_bootloaders_v2.zip then Odin_Stock_Rogers_UXKG3_Kernel.zip and my screen now has a shade of gray with this shade of blue this blue shade that covers the screen right when I turn it on it keeps getting worse it goes away after a couple minutes in recovery mode but now I just don't know what to do I can't even use my phone now help me please! How do I fix my video driver I guess this is whats going on help
Click to expand...
Click to collapse
Read this:
http://forum.xda-developers.com/showthread.php?t=1613523
Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.
crayzze said:
Thanks I read the part about the bootloaders I flashed to gb 2.3.6 and then flashed the bootloaders hoping it would fix the blue screen i always get and have to wait 5 minutes to go away every time turn m screen on it just isin't when I power my phone on its whenever I turn my screen on I can't see anything when someone calls me I have to wait, im on a rogers infuse and I hope this isn't a permanent bug. I went back to 2.3.3 gb stock I don't have a rogers boot logo anymore but it runs fine execpt for this light neon blue that covers the screen does anyone else ever have this problem please help.
Click to expand...
Click to collapse
rainbow screen on recovery = no gb bootloaders
blue screen on phone ...maybe bad cable connection or corrosion at contact
you might have to open it and check the connections
Working and tested CWM 1.2 ghz
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!
Fullmetal Jun said:
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip in the following link:
forum.xda-developers.com/showthread.php?p=25724638
You now have a working GB cwm and next is follow Enthropy's CM9 guide for your first ROM!
Click to expand...
Click to collapse
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.
crayzze said:
Thank you but it's not bricked... are you suggesting this will take away the screen issue?... k so it's been a while since I used my infuse the screen was getting so annoying that I put it away for a month last night I turned it on and the screen seemed fine, I was very pleasantly surprised I re rooted it and put on the new cm10 jellybean and noticed the longer I kept using the screen the more the lines/screen problem came back I left it untouched overnight after modding it and this morning it's fine again until continued use of the screen... I have taken it apart and unplugged all the screen plugs reattached looked around everything seemed fine so I dunno... I have a really newbie question for the way I went about getting to jellybean from stock... first I rooted it with Odin_Infused_Gingerbread_Kernel_v1 and noticed that cwm was installed so is this all I need to proceed with installing ics? because I kept thinking I needed to install 2.3.6 and that is not firmware meant for my phone and thats what I think might be the cause of my screen issue sooo do I just need to root it first then go straight to ics or do I need to put 2.3.6 then ics?
I am on a rogers infuse.
Click to expand...
Click to collapse
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl
Help!
qkster said:
Re-reading your thread, I realized that you have a i997R - Roger's. These come stock GB 2.3.4 - unlike the i997-ATT that started with 2.2.1
The difference is that the i997R has already built in bootloaders from the start. That means that Roger's phone do not get the distorted recovery with flashing we termed as "rainbow." The rainbow is fixed with a bootloader flash. Roger's phone do not need this step.
I think the color distortion you are seeing could be due to a heating issue, the screen or the graphics chip. More likely than not, this may be hardware related.
If you have opened and cleaned out the connections and such, and have not noted any difference, then the problem may be deeper situated. Further testing may require another Infuse and swapping out parts to see where the issue lies.
gl
Click to expand...
Click to collapse
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol... My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear... my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.
crayzze said:
Yes I bootloader flashed it in desperation with an at&t bootloader and now lost the rogers bootloader lol...
Click to expand...
Click to collapse
no big deal..same phone..same hardware..different version of firmware..it's the APN for providers that makes the difference
crayzze said:
My phone came stock 2.3.3 gb and I desperatly wanted gb 2.3.6 so I rooted it and did so, then after discovering ics and then after jb... I believe that installing 2.3.6 might have damaged the hardware being that its only ment for at&t i997's or possibly a combination of 2.3.6 and then installing ics then jb or whatever the case may be my screen needs 1 to 5 minutes to fully appear.
Click to expand...
Click to collapse
yes..you are right. Rogers came with 2.3.3 not 2.3.4 as I previously stated.
the earlier versions of gb came with Carrier IQ that track users. It was taken out later.
I doubt Installing 2.3.6 or ICS or JB will cause any prob with the phone. I suspect your phone may have some hardware issues.
After the first flash, the os (esp ICS or JB) may need time to build cache and dalvik..sometimes it may take a few minutes. Blue or distorted screen, however, is not typical from my experience.
crayzze said:
my question is if I ever happen to root another rogers i997 do I need to upgrade to 2.3.6 before installing ics or can I install right after root? Because I also might re root the phone back to stock and root it then install the newer version of ics then jb cm 10.2... I am currently running on jb cm 10.2 do you think it would make a difference if I rerooted to stock then install newer ics then jb with upgrading to 2.3.6 for at&t phones??? Thank you.
Click to expand...
Click to collapse
IMO, it doesn't matter how you get to CM10.2. Rooting is just one method. The idea is to get insecure recovery...ie..cwm.
from stock rom, you can odin or heimdall a custom kernel without rooting. boot into recovery and flash what you want.
it doesn't matter if its rogers or att. same phone..same hardware. years ago, it only mattered when a user had to return or exchange the phone for warranty...after the warranty period ended..it's not a big deal.
flash away at any method you want. it doesn't make any difference in my mind. get some practice..the infuse has many restore methods via odin or heimdall
rooting gives one access to the root directory
insecure kernel or custom recovery allows one to flash firmware without manufacturer signature

[Q] camera fail

Hey I'm new to all this and rooted and installed the jelly bean rom. Now my camera give me the camera fail msg. Front facing camera works in apps but cant get it to switch over. Pretty sure I didnt save stock rom. Should I try a different Rom or what should I do? Any Help would be great

Big problem with Galaxy S SCL i9003. Phone won't exit from Recovery with ROOT. HELP!!

Hi, I have a big problem with my Galaxy S SCL i9003.
From last week everything was working good, but something happened.
The camera stop working. Hours and hours searching and I find the solution but I need root.
Ok, I make root and surprise, the phone doesn't want to exit from CWM Recovery.
I tried installing ROMs, and the f*cking recovery won't let me do it. I tried with a ROM from a Spanish forum, it was installed all correctly and then another time, the damned recovery.
I tried to install a lot of ROMs, a lot of things from XDA-Developers, now even won't let me to install any ROM.
I do with Odin several times reflashing with original FW and it works by the way... But I need to be root to make my camera work, because I need to replace some system files :crying: :crying: :crying:
Please, what can I do ?!? If I root with Odin everytime my phone won't exit from recovery and the damn recovery even let me install a rom, so I need another time to flash to original FW and well... I can use the phone but I can't use the camera :crying: :crying:
¿What can I do? I tried with 3 different recoveries, all of them are quite old (the newest is from 2012) and I want to know if exists an newer version for my phone. I need to root it, but if I try everytime with Odin and do all good, everytime my phone bricks in Recovery. Whatever I do it's the same... it doesn't exit from recovery mode until I flash to stock FW.
Big thanks in advice. :good:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
acuicultor said:
If you flash stock rom and the camera still dont work i think is hardware problem related. Fresh installation of Stock rom should fix All software related problems.
Click to expand...
Click to collapse
Hi friend thx for the reply, the thing is that im on stock rom and all goes good, but the problem is I want to root it to solve the camera problem.
I searched on the web and several i9003 and i9001 have this issue when they're updating or when they've been updated... I can solve it changing some files on system but I can't have root access :crying:
I think your problem is related to recovery.
You can flash Bam Kernel via Odin. I'm
using it. Download the latest fix version and
flash it in pda. It has CWM & it will root the
device.
http://forum.xda-developers.com/showthread.php?t=1355675

Categories

Resources