I wanna flash Touch through Odin (unless there's an easier way) but will having regular clockwork installed hurt anything if I flash?
Sent from my SCH-I535 using xda app-developers app
Flash touch over regular cwm via ez recovery. It's fine. Don't use odin to flash recovery.
Thanks! Did that and it worked!
Sent from my SCH-I535 using xda app-developers app
FYI...it would be better if you ran CWM 6.0.1.0 instead of CWM Touch...ive had better results with the newer version, if you're interested in trying it out.
I actually used CMW to flash 6.0.1.2 over 6.0.1.0 as opposed to using EZ recovery. I used EZ Recovery to get 6.0.1.0 on the phone in the first place. I do this because the first S3 I tried to use the custom option in EZ Recovery on was soft bricked upon flash completion.
t h turkick
shangrila500 said:
I actually used CMW to flash 6.0.1.2 over 6.0.1.0 as opposed to using EZ recovery. I used EZ Recovery to get 6.0.1.0 on the phone in the first place. I do this because the first S3 I tried to use the custom option in EZ Recovery on was soft bricked upon flash completion.
Click to expand...
Click to collapse
Agreed, just use the CWM ROM Manager app to flash on the most current 6.0.1.2. You can also flash most recent touch recovery through the app as well, that option is at the bottom. I use the touch while I am using ICS roms, but when I start playing with JB developments, I flash back to 6.0.1.2 standard recovery. Though I have not experienced any issues with touch and JB, the developers warn in bold to not use it with JB roms. CWM is updated more frequently than the EZ recovery app, and why use an outside source to flash CWM anyways? EZ recovery is good to start out with because of its different recovery options, but ultimately is not better that the actual recovery source app CWM.
Related
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
capt8210 said:
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure what you mean. You can do a backup of your current state, or you can flash a new rom from via zip file
If you have recovery your good to go. I do recommend doing a backup before you flash anything though just in case something goes wrong.
Dude everything you need is here
http://forum.xda-developers.com/showthread.php?t=1762709
Sent from my SCH-I535 using xda premium
capt8210 said:
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Post #3 is correct...
OK..you are rooted and now have recovery CMW 6.0.1.0 which you flashed with ez recovery (all you need to do with that app, you are done with it). At this point just pick a rom that you want...example SynergyROM. All you would do is download the rom and place it on your SD card...I would recommend the extSDCard.
Boot your device into recovery by holding the buttons to do it or just open EZ recovery and hit button 'boot recovery' option only. Find the zip on ext card and that is it...
Always do a backup first which you can do in recovery before flashing the new rom and save that to your ext sdcard also which is an option in 6.0.1.0 after backup then flash new rom
Thank you all for the info
Sent from my SCH-I535 using Tapatalk 2
parcou said:
Post #3 is correct...
OK..you are rooted and now have recovery CMW 6.0.1.0 which you flashed with ez recovery (all you need to do with that app, you are done with it). At this point just pick a rom that you want...example SynergyROM. All you would do is download the rom and place it on your SD card...I would recommend the extSDCard.
Boot your device into recovery by holding the buttons to do it or just open EZ recovery and hit button 'boot recovery' option only. Find the zip on ext card and that is it...
Always do a backup first which you can do in recovery before flashing the new rom and save that to your ext sdcard also which is an option in 6.0.1.0 after backup then flash new rom
Click to expand...
Click to collapse
Do we even use Rom Mgr? I think this where I'm making mistakes.
You don't need to use Rom Manager. You have the EZ recovery that flashes a recovery. Rom manager does the exact same thing but EZ recovery makes it simple. Just do what post 3 says and you'll be fine. I just started using EZ recovery 3 days ago and I've already flashed a recovery and a custom kernel. The EZ recovery is only foe flashing recoveries...don't ever try to flash a custom Kernel through it. You can flash custom kernels through CWM Recovery the same way you flash custom rooms, but you need a recovery that supports kexec which would be CWM 6..which is what you have.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
95talondsm said:
You don't need to use Rom Manager. You have the EZ recovery that flashes a recovery. Rom manager does the exact same thing but EZ recovery makes it simple. Just do what post 3 says and you'll be fine. I just started using EZ recovery 3 days ago and I've already flashed a recovery and a custom kernel. The EZ recovery is only foe flashing recoveries...don't ever try to flash a custom Kernel through it. You can flash custom kernels through CWM Recovery the same way you flash custom rooms, but you need a recovery that supports kexec which would be CWM 6..which is what you have.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
Click to expand...
Click to collapse
Ok, thanks. Been having problems and I think it's because I've involved Rom Mgr
I would to flash my gs3 to CM10 but my question is can I use ez recovery app and flash it to cmw 6.0.1.0 and then the CM10 rom or I have to choose custom and a select d2vzw_recovery.img to flash it?
Sent from my SCH-I535 using xda premium
GserMx said:
I would to flash my gs3 to CM10 but my question is can I use ez recovery app and flash it to cmw 6.0.1.0 and then the CM10 rom or I have to choose custom and a select d2vzw_recovery.img to flash it?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I believe EZ recovery allows you to flash a lot of kexec based recoveries, including CMW 6.0.1.0.
I'm curious if using a kexec recovery with CM10 will cause your phone to boot into recovery when you hard reboot, but I'm trying to find out if there's a way to go back to your already flashed CM10 instead of booting the stock ROM.
is there a way to install this without going the kexec rout sense we have a unlocked bootloader now?
is it easy to flash it if you go back to rooted stock and then unlock your phone?
Just use ROM manager or even better, the ez recovery app to flash regular, touch or twrp recovery. Non kexic should use the non-touch 6.0.1.0
Sent from my SCH-I535 using xda app-developers app
VinBertinelli said:
Just use ROM manager or even better, the ez recovery app to flash regular, touch or twrp recovery. Non kexic should use the non-touch 6.0.1.0
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
so can i just re flash my phone back to stock root then unlock and run the ez recovery then flash cwm and have fun right
msnglink said:
so can i just re flash my phone back to stock root then unlock and run the ez recovery then flash cwm and have fun right
Click to expand...
Click to collapse
right. have fun!!
dagnisaun said:
right. have fun!!
Click to expand...
Click to collapse
sweet, thanks
When i first opened clock work mode manager it said to me to flash cwm recovery i obeyed it and flashed it and gave it root access and it said that it flashed cwm 6.0.1.1 when i entered recovery i see version is 6.0.1.0 what is the problem?
App say that flashed version is 6.0.1.1 and cwm recovery say version is 6.0.1.0??!!
Sent from my GT-I9100 using xda app-developers app
Mohamedselim said:
When i first opened clock work mode manager it said to me to flash cwm recovery i obeyed it and flashed it and gave it root access and it said that it flashed cwm 6.0.1.1 when i entered recovery i see version is 6.0.1.0 what is the problem?
App say that flashed version is 6.0.1.1 and cwm recovery say version is 6.0.1.0??!!
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
You may want to flash it again. If that doesn't work, it is probably a software bug. I've never used the ROM Manager to install recoveries as I have always done that through Odin, but that seems like a software bug.
as I know, Clockwork isn't designed exclusively for Gtab2...
How do you figure that?
I have been flashing (roms) for a while now devices including G2, HTC Hero, HTC Thunderbolt, Moto Razr, and now Galaxy S3. I don't typically post questions on any forums because I usually can find an answer with enough searching, it pains me to write this.
Problem: I can only flash certain roms on my Verizon SGS3.
I have no problem flashing unofficial aokp, unofficial cm10, and Synergy.
When I try to install different roms from xda and other websites i get the attached photo. These roms include paranoid android, miui, liquids jelly bean, and a few others.
My device is rooted, unlocked bootloader through ez unlock, running clockworkmod (touch) v5.8.4.5 via ez recovery.
Before I flash I always:
wipe data/factory reset
wipe cache partition
format system
wipe dalvik cache
Re-downloading has not fixed the issue. I'm sure im missing something simple any help would be warmly welcomed!
Thanks in advance all!
-Stumped S3 User
The problem is your running the wrong cwm recovery. 5 . something version causes problems with jb rom's. Surprising you got cm10 to run. Download cwm rom manager and install cwm touch 6.0.1.2 touch from in that application. EZ recovery does not offer that version of touch, but it does offer that version of regular. I don't see all the hype about ez recovery. That's definitely your issue.
Sent from my SCH-I535 using xda premium
annoyingduck said:
The problem is your running the wrong cwm recovery. 5 . something version causes problems with jb rom's. Surprising you got cm10 to run. Download cwm rom manager and install cwm touch 6.0.1.2 touch from in that application. EZ recovery does not offer that version of touch, but it does offer that version of regular. I don't see all the hype about ez recovery. That's definitely your issue.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Bingo!! Wrong version of CMW, just download e-z flasher from the play store and use it to flash either TWP or CMW. Easy peasy quick and easy.
I suggest you use twrp.
Twrp has bugs with jb rom's. Cwm regular or touch 6.0.1.2 is the most stable safe way to go. If your unsure at all, use cwm. Twrp on our devices at this time is NOT as stable as cwm, but does work effectively. If you use twrp, don't be surprised if you get a poor flash here and there.
Sent from my SCH-I535 using xda premium
annoyingduck said:
Twrp has bugs with jb rom's. Cwm regular or touch 6.0.1.2 is the most stable safe way to go. If your unsure at all, use cwm. Twrp on our devices at this time is NOT as stable as cwm, but does work effectively. If you use twrp, don't be surprised if you get a poor flash here and there.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Cwm 6.0.1.2 all day. Refuse to use anything else lol. Unless amon ra gets ported
Sent from my SCH-I535 using Tapatalk 2
Worked like a charm!
I downloaded rom manager, installed latest clock work, updated to touch, and it is working perfect! Thanks to all! The fun begins