Related
Welcome to the Huawei U8860 Honor / Honour / Glory - Index!
(please treat this thread as dev-thread, it is part of a dev-forum, not Q&A)
Please don't PM me for support, I will ignore those requests - they are just too many and I'm not getting paid for that, I'm not huawei support. Just ask your questions somewhere in the forum, but in my opinion this thread is really not the place for it, since this is a developer forum and not the Q&A section. That's why xda-developers adds restrictions to post here for new users - to prevent this to be a Q&A-Forum. Please Try to ask your questions in the appropriate Q&A-Section of the xda-developer Forum.
Different versions of the Huawei Honor
There are two feature differences that I am aware of:
Number of Touch-Points: 2 or 5; I have 2 touch-points and with B977 my ProjectMenu just printed "synaptic" as touchscreen version, with B919 it states "synaptics-TPK.6"
Position of Huawei Logo on the back: in the top-left corner (china / russia?) or in the middle like this: http://kaefert.is-a-geek.org/huawei_honor/IMG_7491_small.JPG
It seem's there are versions without a camera? at least user limzm states in his signature his U8860 doesn't have one.
Backup & Recovery
In my opinion the first and most important thing when playing around with different ROMs, is the ability to backup and restore the phones ROM & state.
For this you need a custom recovery (which you will also need to flash custom ROMs, so you might only skip this if you want to only flash stock ROMs)
If you're on an 2.3.6 ROM, then possibly for this to work, you first need to flash a different stock ROM. There have been reports that with 2.3.6 the method below may not work. Also some newer ROMs like B923 and above have locked boot loaders, the latest ICS ROM that you can use for this is B919
NEW: CWM 6.0.1.0 with touch-support: MOD EDIT: Link removed.
OLD: download recovery-u8860-en.img from here MOD EDIT: Link removed.
make sure there is no directory named "dload" on your micro-sd-card - if there is, rename or remove it.
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
You should now see your phones screen pink (="pink screen mode")
Now connect your phone with an USB cable to a computer
A few disks should be mounted, search for the one that has an "image" folder with an recovery.img and a boot.img inside it. rename the recovery.img to recovery-bak.img (or simular) and copy recovery-u8860-en.img there and rename it to recovery.img
WARNING: Don't use the file recovery_v8.img which is referenced in a few other guides. It crashes and leaves you with non bootable phone-states and/or with unfished backups which cannot be restored.
ROMs
Stock ROMs (& leaked stock ROMs)
Stock ROMs (or leaked stock ROMs) can be flashed like this:
Download and unpack onto your micro-SD Card like that: /mnt/sdcard/dload/UPDATE.APP (some ROMs also have UPDATE_CUST.APP, copy it to the same place. If you're update has a second dload_cust (or the like) folder, you need to flash it in a second round just as the first one, by renaming it to "dload")
Turn off Fast-Boot, and shutdown your phone. If you don't know how to turn off Fast-Boot, pull the battery (it can be found in different places in different ROMs)
Press and hold volume-up, volume-down and power-button at the same time.
If everything above was done correctly, you should be able to watch your phone upgrading now.
Alternative: Some ROMs have an option in the settings that lets you start the upgrade-procedure without step 2.) and 3.) from above. If you can find it, you can use that one.
You can find stock ROMs here:
International ROMs: http://www.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3834&tb=1
Chinese ROMs (can be changed to english): http://www.huaweidevice.com/cn/technicaIndex.do?method=gotoProductSupport&productId=3884&tb=1
Huawei Germany ROM: http://huaweidevices.de/honour?show=downloads
Huawei Russia ROM: http://huaweidevice.ru/updates.html
a comprehensive german list of stock ROMs can be found here:
MOD EDIT: Link removed.
(thanks to user det-happy for pointing it out to me)
The most important Stock-ROM in my eyes (as base for most custom ROMs there are) is B919, find it here:
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE2OTU=
or here: http://kaefert.is-a-geek.org/huawei_honor/B919_official.7z
Root and Google-Apps for Stock ROMs
NEW: Rooting method for stock ICS B919/B923/B924 (and perhaps others older ICS)
http://forum.xda-developers.com/showpost.php?p=28403132&postcount=799
For people running linux on their computers, I've created an adapted version of this root tool:
kaefert.is-a-geek.org/huawei_honor/HuaweiHonorRootTool_LinuxVersion.7z
OLD: Theres a nice guide explaining how to root and flash+enable google-apps here: (but don't take the recovery from there but from above. explanation also above) - only use this if the new method above doesn't work for you.
http://forum.xda-developers.com/showpost.php?p=22688341&postcount=53
Custom ROMs
To flash custom ROMs:
download their .zip file and put it somewhere on your sd-card
boot into your custom recovery: turn off phone completly, then Long press volume up + power button (for installation of custom recovery see top of this post)
factory reset / wipe everything (not always necessary, but to be on the save side. Some ROMs will not work in some cases if you don't wipe first, however the other way round is also possible, there are custom ROMs that will NOT work if you wipe, best look at the instructions from where you downloaded the custom ROM..)
flash update zip -> choose zip from sd card.
Cyanogenmod
dolmatov94 CM 10 Version 0.9.5 (2013-01-13)
MOD EDIT: Link removed.
newer versions, look at: http://dolmatov94.ru/
Da_Nya v2.4 [with sound mod] (2012-12-30)
MOD EDIT: Link removed.
Da_Nya v2.4.1 (2013-01-09)
MOD EDIT: Link removed.
CM 10.1 (Android 4.2) from 4PDA (posted here by user tuanshungf 8th February 2013)
MOD EDIT: Link removed.
Another list of Cyanogenmod ROMs can be found here (German):
MOD EDIT: Link removed.
ShenduOS
This ROM seems to be quite popular, but before deciding to use this, think about if you really wan't to support guys that treat the open-source community like **** by violating the GPL (by not publishing their kernel sources)
Stable Versions: MOD EDIT: Link removed.
Dev Versions: MOD EDIT: Link removed.
Mixture of ShenduOS and CM, with Android 4.2
MOD EDIT: Link removed.
MOD EDIT: Link removed.
MOD EDIT: Link removed.
FrozenPika (CM10.1, Android 4.2.2, based on ShenDu) GAPPS Integrated
Posted here by user "vTIMv" on 5th March 2013, 08:58 AM - found it on 4PDA.ru, uploaded 3rd March 2013
MOD EDIT: Link removed.
Android 4.x MIUI ROMs
WARNING: most MIUI-ROMs have SMS-confirmations turned on by default, which costs extra with many providers (like mine..) so check it before sending your first SMS and turn it off
Sadly, these ROMs have serious RAM-problems, multi-tasking was quite impossible the last time I tried one of those (any app I tried to put into background was imediatly terminated)
MOD EDIT: Link removed.
Android 2.3 MIUI ROM
Creator doc3000 posted it here, have not tried it out
http://forum.xda-developers.com/showthread.php?t=1596442
WARNING: user paul89rulez informed me that you can loose your IMEI by flashing this ROM, you can find a IMEI backup app here: MOD EDIT: Link removed.
Lists of other Custom ROMs
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> chinese u8860 forum, contains ROMs, but also other stuff concerning the u8860
MOD EDIT: Link removed. --> an incomplete english index of the chinese list below
MOD EDIT: Link removed.
MOD EDIT: Link removed.
Custom Kernels
I found a custom kernel that adds the option to overclock up to 2GHz. I'm used it running at 1.8GHz and it didn't seem to be any more unstable than before (I'm using the MIUI ROM which is a little bit instable all by itself already)
MOD EDIT: Link removed since you need to register to download the kernel, I also attached it MOD EDIT: Link removed to make it easier for you.
I also managed to build (and deploy) the 3.0.8 kernel sources provided by huawei myself, see http://forum.xda-developers.com/showthread.php?p=23505650
With the help of the writer of rvoix I managed to adept our kernel in a way that rvoix works, but for the moment only mono so both parties mixed together in one channel (but recorded from the line, not only from the mic like most apps do). I attach the kernel that works with rvoix: View attachment boot_voc2.img.
Or for people wanting to build their kernels themselfs, here's the patch: http://code.google.com/p/rvoix/sour...pdragon/kernel/huawei_honor_u8860_rvoix.patch
UPDATE: Since our kernel sources don't work with B919 and later (non functional camera and wifi) I decided to go the other way round and modify the rvoix app to work with our kernel instead of adapting the kernel to work with the app. Here are the results: http://code.google.com/p/rvoix/downloads/detail?name=rvoix_mod_kaefert_v2.apk --> call recording that should work with all huawei honor 4.0.3 ROMs!
Various pointers
Adapting Chinese ROMs
Adding Google Apps (like the Market) --> Download zip from here http://goo-inside.me/gapps and flash it with recovery
Remove unwanted chinese system apps --> I do it with QtADB --> http://qtadb.wordpress.com/ But I guess you can also do it with some root app management apps
Change to languages that are not choosable in the standard language setting --> https://play.google.com/store/apps/details?id=jp.co.c_lis.ccl.morelocale
Reading chinese sites
People who don't use google chrome or the chromium project (yet) probably don't know, that it has a really nice built-in translating feature, thats very useful for finding your way arround all these chinese (or russian) websites, and much better then using translate.google.com (or other such services) manually with other browsers.
Miscellaneous
Silent Huawei camera (ICS)
I was annoyed one day by all the noises the huawei camera simulates. Therefore I investigated and found out how to make it silent.
If you're interested, see http://forum.xda-developers.com/showpost.php?p=29079425&postcount=1028
Enabling logcat output on huawei phones
If your on stock ROM its quite easy, just dial *#*#2846579#*#* and enable logging in the project menu
For custom ROMs, I got a link from paul, but I didn't try it:
MOD EDIT: Link removed.
another site about enabling logcat on huawei devices:
http://stackoverflow.com/questions/...device-dev-log-main-no-such-file-or-directory
UPDATE
Sorry guys, but there won't be any updates by me anymore. I've moved on to Sony Xperia Z. The notoriosly low memory problem finally did it. (And Ingress)
There's a newer list of custom ROMs here:
http://forum.xda-developers.com/showpost.php?p=45164331&postcount=3056
Hi guys.
I've just cleaned this thread and would like to remind everyone about some points, so that they're not repeated in the future, and explain all the missing links you may notice.
Warez is strictly forbidden on XDA. Please do not link to websites that provide it, or to ROMs that contain pirated apps.
Kernels are licensed under the GPL. This means that the kernel's source should be provided. If it is not, it's illegal and will be treated as warez as far as XDA is concerned. In simpler terms: if you're posting a link to a ROM that contains a kernel, or a kernel, make sure the kernel's source is available and link to it as well.
Recoveries that aren't based on stock and that use a zImage (which is covered by the GPL) must also be provided along with the source.
Links to competing or commercial websites are not allowed. Links to websites that require registration to access downloads are also not allowed (there are exceptions, please see rule #11 for more info.)
Credits must be given, and you must have permission to share the work. Assuming that you do: if this goes against the point above, you may mention the member/website without linking directly to his work. Point #2 still applies - a link to the kernel's source must be provided if necessary.
I realize this may have caused links to your favorite custom ROMs to be removed, and I apologize about that. Many of you clearly put a lot of effort into building, maintaining and helping with this index. However, all posts must respect the rules first and foremost.
Please PM me if you have any questions or if you need further clarification.
Thanks for understanding.
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
limestar said:
Hey thanks so much for helping with this. I followed your guides and managed to get my Honor rooted and on an ICS version. Thanks so much.
Click to expand...
Click to collapse
You're welcome. However, for the future, if theres nothing you want to say but to give thanks to someone for a post above yours, don't answer with a post of your own, but just use the "thanks" button. Thats what it was made for.
However if there are some questions or some obscurities in my post, feel free to ask.
Sir, does the miui rom is stable for daily use,
wahyuwidi said:
Sir, does the miui rom is stable for daily use,
Click to expand...
Click to collapse
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
cymagnus said:
Check with you, if i installed the custom recovery, and root, can i revert back to stock by flashing via the settings menu or the vol/power button combination and stock rom in load directory?
Click to expand...
Click to collapse
Well the settings menue doesn't contain the huawei upgrade option in every ROM (for example not in the MUIU ROM), but the volumn up+down while booting will probably work, I haven't tried though. The upgrade directory however has to be call "dload", not "load".
To revert back to a previous ROM I find it much better to use the nandroid backup and recover options that every recovery image I saw yet contains. However be careful, the recovery-v8.img posted on some other places is instable and crashes before the backup is finished. you won't be able to recover such an incomplete backup. Always check if you have some backup complete message, it should NOT reboot automatically after making a backup.
kaefert said:
Well, I've been using it for 2 days now. I wouldn't call it stable, it has some rough edges, sometimes some system app crashes (like in the beginning I had a problem with the SMS-app), and I've had 2 complete system crashes (forced reboot) while running oruxmaps for navigation & gps-logging with my byclicle.
Click to expand...
Click to collapse
Sir, is it ICS version that you are using? thanks.
daleylay said:
Sir, is it ICS version that you are using? thanks.
Click to expand...
Click to collapse
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
kaefert said:
As stated in my first post, I'm currently using the unofficial MIUI android 4.0.3 version from here:
MOD EDIT: Link removed.
I have one or two unexpected reboots every day.
Click to expand...
Click to collapse
What is in MIUI rom better than the official rom that you like?
cbr900 said:
What is in MIUI rom better than the official rom that you like?
Click to expand...
Click to collapse
Well the MIUI ROM has much more configuration options, for example you have a statusbar settings page where you can choose between default battery icon, percentage number or the top pixel row in green. Or also the MIUI theme chooser is really nice.
Another useful thing is the permission manager thats included that (if you config it that way) asks you whenever an app tries to use a permission that its defined to require. for example if you have an app that has the permission to send sms then the permission manager will ask you the first time that the app really sends an sms if you want to allow or deny it, and also if you want to save your choice or if it should ask next time again.
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Rafasdfgh said:
Hi, Sorry for my bad english, i have a awesome huawei honor, and i do all things that u describe in your post and run perfect but, i'm from mexico and y dont have 3G conection just Edge, do you know a way to resolve that? Thanks
Click to expand...
Click to collapse
Hmm. Well the only ideas I have:
1.) Theres a 2G+3G / 2G only switch, in the MIUI ROM I linked in my first post you can reach it like this:
Home Screen --> Settings --> More... (4th point under the heading Wireless & Networks) --> Mobile Networks --> Only 2G-Networks
If that switch is on, than obviously your phone won't connect to a 3G network
2.) Your not in range of a 3G network?
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
cymagnus said:
Apparently there is bootloop issue for the newly released MIUI ROM 2.3.23 over at MOD EDIT: Link removed.
My experience is that I got stuck at the splashscreen as well.
I have download another at MIUI main site : MOD EDIT: Link removed.
and it works OK. Some portions of the UI are with Chinese texts and a few Chinese apps but overall still OK.
Click to expand...
Click to collapse
yep. I also flashed the version from there MOD EDIT: Link removed and am currently running it. Will update the first post again as soon as theres a working english version for the huawei over there: MOD EDIT: Link removed.
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
EnDSK said:
Hey could you recommend some other rom that will speed up my phone? Im currently overclocked to 1.8 Ghz using a kernel from the links you gave.
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
The ROMs that I know of and that I've tried you find in the first post. I found the loader (=desktop) of the non-MIUI ROMs to be faster and snappier. (However, the MIUI is more feature-rich)
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
EnDSK said:
Okay thanks alot I think I'm gonna give MIUI a try. Downloaded the latest version from the MIUI website. Have you tried any CM Release?
Sent from my U8860 using xda premium
Click to expand...
Click to collapse
As far as I know there is no CM (cyanogenmod) ROM for the Huawei U8860
Hi,
Is it possible to root or do something to the Samsung S8003 Jet to make is run Android or is anyone making a custom ROM for it.
Please give the names of ROM's which this phone might be able to run.
Thanks
viper_ad said:
Is it possible to root or do something to the Samsung S8003 Jet to make is run Android or is anyone making a custom ROM for it.
Please give the names of ROM's which this phone might be able to run.
Click to expand...
Click to collapse
Yes you can!
CyanogenMod 7.1 & MIUI ROM.
Search in Google: "android for jet"
(I can't post direct links thanks to XDA < 10 posts limit)
Your first hit should be from code dot google dot com, that's the one you're looking for.
It has plenty of videos explaining what it does and how to flash it.
Thanks Buddy for the quick reply. I'll look into it.
Details of how to connect to PC, upgrade to JB and rooting with Play Store in posts #3 and #4.
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Model #: PLT7035-B
Processor: Rockchip 2906
1.2 GHz processor
7" capacitative touch screen
ICS 4.0.4
4GB flash memory (expandable up to 32 GB with micro SD card)
512 MB ddr3 RAM
Front facing camera
800 x 480 resolution
Wifi 802.11 B/G/N
Pre-loaded GetJar app
Kernel version
3.0.8+
[email protected] #260
Build number
rockchip
rk29sdk-eng 4.0.4_20121114
Click to expand...
Click to collapse
In the next couple of posts, will try my best to explain in detail the steps that I took to upgrade my tablet from ICS 4.0.4 to JB 4.1.1 and successfully root as well as have CWM installed along with Google Play store.
Cheers
Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/4657640-post1.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the remaining steps in this thread at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.
Jelly Bean 4.1.1 Update:
Proscan Model Number PLT7035-B has it on their official site:
http://proscanvideo.com/item.asp?itemnmbr=PLT7035-B
Firmware:
-------------
4.0
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.0.ZIP
4.1
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_FIRMWARE_4.1.ZIP
Manual
http://www.curtisint.com/html/custservice/manuals/PRO_PLT7035-B_ENFR.PDF
As always - statutory warning - neither me nor the forum are liable for any damages to your tablet - do it at your own risk - no one other than you alone is liable for any damages arising from the usage of this guide.
How to upgrade the firmware after downloading it from above link:
Get the RKBatchTool
First of all - ensure that your tablet is FULLY charged.
Unzip the RKBatchTool v1.5 to your desktop
Turn off the tablet and disconnect from the PC.
Now press the Volume Up (+) button and keep holding it down.
Here comes the slightly tricky maneuver - you have to keep pressing the volume UP (+) button and connect at the USB at same time in to the PC. The tablet will power up on it's own but the screen will remain blank
Once the PC starts searching for the driver, you can release the volume button.
Windows will prompt you for drivers for "RK29 device".
Use appropriate drivers from the driver folder.
Have attached some pictures collected from the web (it is just to give a visual idea as an aid to the walk through and may not be detailed nor accurate in every aspect since some of them are from instructions for other devices).
Run the RKBatchTool v1.5.
Click on first button at the left bottom end of the tool screen - this is a toggle for Chinese/English versions.
In the "FW Path" load the update.img file by clicking on the top right side button with the three ... dots
The following will appear in the status box after the "connected devices" box turns green.
Loading firmware...
Loading firmware Finished.
I clicked "Upgrade" (even though the picture says restore).
Your previously green colored box of "connected devices" will now keep flashing in yellow.
Sit back and have fun watching the status box - will probably take a couple of minutes for the whole process and verification.
When it is all done with - the tablet will reboot.
Remember that the first boot would take a longer time than usual powering up time - so just be patient.
All the best.
Image credits : Dave S:
Attached below are the pics from Proscan site Powerpoint.
I have successfully rooted it twice and installed Play Store (once with ICS and now with JB)
First time it was with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Now I tried the [RK29][TOOL] Root RK29 Tab Toolkit since the sdk was already installed.
Very simple and super effective rooting process.:good:
The first time when I ran in to driver installation issues it was pertaining to permissions.
Found work-arounds elsewhere and also had issues with the installing google playstore.
Hence used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installing CWM was also a breeze - thanks to the great work of fun_ . It is a simple process if you follow his guidelines :good:
He has been very kind to upload an exclusive CWM-based Recovery image for ProScan PLT7035-B (ext4)
Click above link to d/l it and follow installation instructions
--------------------------------------
Precautionary measure - the following is just in case something goes wrong and you want to revert back (and also to have a copy of original images) :
I used the romdump technique and following Oma's suggestion have created the kernel, boot, recovery and system images in SD card for ICS 4.0.4 of Proscan PLT7035-B
http://www.4shared.com/zip/UtCs-yCE/Proscan_PLT7035-B.html
Above link upload to 4share is exclusively for the Proscan PLT7035-B (ICS 4.0.4) and hopefully has not been corrupted because my internet connection has been flubbing for past few days.
Have fun and remember to use caution because you alone are responsible if you brick your device.
Cheers
yes ok
vulcanize said:
I came across this tablet during the holiday season sale at P C Richard and Son (don't see them carrying it anymore). Found it to be a great deal for 59.99 USD (+tax) since it looks like it has a lot of potential for so cheap a tablet.
The one I am currently playing around with is the last of the 5 that I had picked up as gifts for others (and this one will be reaching the recipient soon).
When searching the web for more info, could practically find none. Most of the stuff I saw online was desperate queries of folks struggling with this model - Proscan PLT7035-B from Curtis Intl..
I love the Jelly Bean on my Nexus 7 and the Note II - and so was just trying to put together a sort of guide of the great work you folks have been doing here at XDA that will immensely help those who seek them for this particular make/model.
Product details:
Now before we get into details about flashing etc. link below is a nice "guide" article about the various terminologies like what is a Bootloader, custom ROM, Kernel, CWM, Firmware, Flashing, ADB, Root etc.
http://androidforums.com/sony-erics...om-kernel-cwm-firmware-flashing-adb-root.html
Click on the above link - a must read for newbies.
Now the Statutory warning: Follow all the steps at your own risk. It worked fine for me - so neither the forum or me are liable in any sort of way for any damages whatsoever that you may bring upon yourself.
-----------------------------
I have successfully rooted it and installed Play Store with help of amjtech thread [Tutorial] Proscan PLT-7035-PL Root and install GAPPS
Ran in to driver installation issues and found work-arounds elsewhere and also with the google playstore from above link.
Used the Vending 3.9.16.apk from thread [Share] Google Play 3.10.10 [Updated 14.12.12] to resolve it.
Installed CWM using steps from thread [CWM] CWM-based Recovery for RK3066/RK2918 devices with the help of fun_
----
I would love to have a suitable kernel on this Rockchip based model to flash Oma's JB.
Any ideas/suggestions????
Thanks in advance.
Cheers
Click to expand...
Click to collapse
Rooted stock Jelly Bean 4.1.1 with Play store screen shot from the Proscan PLT7035-B with RK2906
Details of how-to in the third and fourth post from top.
A BIG THANK YOU TO Oma7144 :good:
RK2906 Tab Proscan PLT7035-B now joins his list and rocks with Jelly Bean Custom Rom! Click here if you want to try it out.
Am loving it.
Thanks to him the Kernel for the PLT7035-B can be found here
Or click here for direct download.
Looking foward to the stable CM10 version.
Cheers.
This is an update from my end with regards to the JB 4.2.2 Multi-Window by Oma on the RK29
http://crewrktablets.arctablet.com/?p=1661
Check it out
------------------------------
There is also a Second Test Build CM10.1 (Thanks Oma) on Proscan PLT7035-B
Tried the CrewRKTablets_RK29_Loox_CM10.1_4.2.1_20130113.7z along with CrewRKTablets_Format NAND.zip with the custom kernel made by him on his ICS thread.
Am very happy to say it is working great so far except for the spotty wi-fi at times and also screen rotation (needs sensor/rotation calibration).
Please remember that it is still a test build.
Cheers.
pondering
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.
crhm said:
Before I try something dumb was pondering if the update will work on 7035 pl. would love to have jb on it, and maybe get a little better battery life. There is so little info out for the pl. thanks for any help you can give.
Click to expand...
Click to collapse
NO!!!!
It is meant for the 7035-B. Someone else flashed the wrong ROM and the message is quote below.
capfl2k5 said:
Proscan/Curtis PLT7035-PL
Sooo I had a moment of derrrr and flashed the jellybean upgrade for the PLT7035-B to my 7035-pl. Boots up (quickly I might add) and goes to the lock screen but I have no touch control over the screen. Does anyone have an image of the original firmware for this tablet? Or any Idea on how I can regain control of the touch screen?
Source: http://androidforums.com/general-tablet-talk/682172-proscan-curtis-plt7035-pl.html
Click to expand...
Click to collapse
But you can do all the rooting and install CWM along with playstore as mentioned in post 4 since fun_ has a generic CWM on his site.
http://forum.xda-developers.com/showpost.php?p=37221496&postcount=4
Would also appreciate it if you could kindly do a romdump of your 7035-PL and host the Boot, Recovery And System Partition Images to help people like capfl2k5 whose post from another forum is quote above.
Also try requesting Oma for a suitable kernel in his JB custom rom thread http://forum.xda-developers.com/showthread.php?t=1903745 and you will be all set. I really like that rom he has built.:good:
And then you could also try the CM 10.1 with that same kernel
I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2
crhm said:
I will see what I can do . I have su already but did not have any luck with with Google play I will try again later
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
As mentioned in post # 4 in previous page
Download the Play store apk
How to install:
Rename it to Vending.apk
Paste it in system/app
Change permissions to rw-r--r--
Reboot if needed
http://forum.xda-developers.com/showpost.php?p=32731467&postcount=1
Courtesy: Kakashi Hatake
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
Great.
Hope you followed Oma's advice for the romdump images.
http://forum.xda-developers.com/showpost.php?p=35298423&postcount=462
As for CWM - it is very simple and straightforward thanks to the great work by fun_
http://forum.xda-developers.com/showthread.php?t=2102679
Clicking the link at the top of his post will take you to his site where there is a nice walkthrough.
Now the proscan PLT7035-B that I have currently is running on the custom rom - Oma Odys Loox JB 4.1.1 V1.2.3a and I might have just enough time with the tablet to make it to 4.2.2 version.
Cheers
Have been using Orange Backup (by snoopy33) on the proscan and loving it.:good:
Playstore:
https://play.google.com/store/apps/details?id=com.pommedeterresautee.twoborange3
xda:
http://forum.xda-developers.com/showthread.php?t=2040507
Suits the need of lazy folks like me
crhm said:
I will look for a place to put those files, boot ,recovery, and system. Got a chance to to do a romdump. Now to move on to a recovery for cwm. I am getting to old for this stuff fingers dont work like they used to.lol
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
crhm said:
I put the plt 7035-pl files on mediafire. I hope it helps. Iam trying to build a recovery file for cwm. I hope to make a little progres there soon.
I will try and help when I can. I just have to quit thinking webos and maybe it will go faster.:good:
Recovery.img
http://www.mediafire.com/view/?5v04gu0c2ow8cx1
Kernel.img
http://www.mediafire.com/view/?6ztdrpr217h1dos
Boot .img
http://www.mediafire.com/view/?tt9fdttjxankm1i
Click to expand...
Click to collapse
Cheers.
Ubuntu Installer for Android
Was wondering if this cheap dual core tab could handle Ubuntu and used the app from following link to install an older version of Ubuntu
http://www.mediafire.com/?5ru3tzddteciahd
Process is very simple and the app gives a detailed walk through. Am in the process of upgrading the versions now
Kudos and all credits to the original devs because I saw it on a site that did not name them.
For newer version of the install app visit the linux on android website:
http://linuxonandroid.org/downloads/
Cheers.
vulcanize said:
I see that you have posted the image dump on mediafire
http://forum.xda-developers.com/showpost.php?p=38400364&postcount=53
Am just putting it up here in case anyone with the PROSCAN PLT7035-PL stumbles across this thread in search of the stock recovery, kernel etc.
Cheers.
Click to expand...
Click to collapse
Just a mirror created for the PLT7035-PL kernel, boot and recovery images (originally posted by crhm)
https://www.dropbox.com/sh/hxky38cnck1m0oq/GXvk4Onc9F
JB 4.2.2 on the Proscan PLT7035-B
Unofficial AOSP 4.2.2 on rk29board ! thanks to Oma
http://forum.xda-developers.com/showthread.php?t=2162760
:good:
As soon as I get my recovery fixed I was thinking of using a copy of recovery and port it to mine fix it where it could be flashed with rktool if need be
Sent from my Galaxy Mini (SGH-T499) using Tapatalk 2
Hi, I am new to android and stuff, so I still dont know how to do it, but can I ask how can I upgrade it to kitkat or lollipop (if not can I just upgrade it to Jellybean ?)
llCrosshairsll said:
Hi, I am new to android and stuff, so I still dont know how to do it, but can I ask how can I upgrade it to kitkat or lollipop (if not can I just upgrade it to Jellybean ?)
Click to expand...
Click to collapse
You shouln't have bought Chinese devices like this. They don't provide necessary guide for their things out of their country. They do things in their own forums and own language.
Okay, I didn't find any ROMS for Kitkat for your device.
I just came to know that you can upgrade to Jellybean. I just saw this:
suunnittelija said:
4.1.2 update was released today. Here's the direct link for download:
http://pan.baidu.com/share/link?shareid=3082485858&uk=3442944625
It's recommended to update first from B03 to B04 and then do the 4.1.2 update. Here's the link for 4.0.4 B04:
http://pan.baidu.com/share/link?shareid=3921007642&uk=3945654451
How to do 4.1 update. Remember to backup first!:
1. Download V985_update_4.1.2.7z upgrade package file and unzip the file. Under the folders there's update.zip.
2. Copy update.zip to the external SD card root directory
3. Enter the "Settings" -> "System Software Updates" -> "Storage card upgrade." and uncheck "retain user data upgrade". If this is checked, it will cause some issues and the phone might not boot.
4.Click the OK button to upgrade. Upgrade process starts automatically after a few seconds.
Root & recovery:
http://pan.baidu.com/share/link?shareid=4088477952&uk=1178049129
Click to expand...
Click to collapse
The forum thread link is: http://forum.xda-developers.com/showthread.php?t=2135672
And maybe you must only use this tool: http://pan.baidu.com/wap/link?uk=505744596&shareid=3127577430&third=0
You can ask the users who have the same device as yours like him maybe: suunnittelija
I don't have it anymore, sold it while ago. 985 was good phone!
can I update my phone ?
GokulNC said:
You shouln't have bought Chinese devices like this. They don't provide necessary guide for their things out of their country. They do things in their own forums and own language.
Okay, I didn't find any ROMS for Kitkat for your device.
I just came to know that you can upgrade to Jellybean. I just saw this:
The forum thread link is: http://forum.xda-developers.com/showthread.php?t=2135672
And maybe you must only use this tool: http://pan.baidu.com/wap/link?uk=505744596&shareid=3127577430&third=0
You can ask the users who have the same device as yours like him maybe: suunnittelija
Click to expand...
Click to collapse
Thanks, but one more question, I cant update my phone to kitkat or lollipop ?
llCrosshairsll said:
Thanks, but one more question, I cant update my phone to kitkat or lollipop ?
Click to expand...
Click to collapse
I believe ZTE has not released kitkat or lollipop updates, but there should be Cyanogenmod available. I quickly searched from Chinese sites and I found these:
CyanogenMod 10.2(Android 4.3.1) For ZTE U985
http://bbs.flydev.cc/thread-5719-1-1.html
[Live Team] [update fix2] CM11 For ZTE U985 special edition release
http://bbs.flydev.cc/thread-6748-1-1.html
Download links should be available on those threads but you need to login first and post comment to the thread so that the link will be visible. Chrome with Google translator is needed When I downloaded roms from Chinese sites they required posts in Chinese, all english posts was removed and they can ban user who posts in english. So just copy paste something clever from earlier posts. Good luck!
can I ?
suunnittelija said:
I believe ZTE has not released kitkat or lollipop updates, but there should be Cyanogenmod available. I quickly searched from Chinese sites and I found these:
Download links should be available on those threads but you need to login first and post comment to the thread so that the link will be visible. Chrome with Google translator is needed When I downloaded roms from Chinese sites they required posts in Chinese, all english posts was removed and they can ban user who posts in english. So just copy paste something clever from earlier posts. Good luck!
Click to expand...
Click to collapse
can I install the CyanogenMod 10.2 through different forums, or through YT ? cause I am afraid that if I install the CyanogenMod 10.2 in that site, my android's language will turn in to chinese which I cannot understand. Thanks in advance.
I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Robert Hall said:
I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Click to expand...
Click to collapse
Please PM me the link to the website . I don't know Chinese but I remember a root tool that was in Chinese and I will try my best to "mimic" how I got my way around that.
RAZERZDAHACKER said:
Please PM me the link to the website . I don't know Chinese but I remember a root tool that was in Chinese and I will try my best to "mimic" how I got my way around that.
Click to expand...
Click to collapse
I've sent you a message however I don't think you'll manage without knowing chinese
The tool they use is to unlock the bootloader and it's a proprietary tool.
Robert Hall said:
I've sent you a message however I don't think you'll manage without knowing chinese
The tool they use is to unlock the bootloader and it's a proprietary tool.
Click to expand...
Click to collapse
Yea I saw it, I'll see what I can do...
I'm sorry but I did not have time yesterday. I don't have access to a proper computer so I am using my raspberry pi to do all this. Since it does not have a photo editor I am working on a google slide document that will be accessible by link. I'll post it here as fast as I am done
---------- Post added at 10:36 PM ---------- Previous post was at 10:20 PM ----------
Here is how far I have come. I assume you have to download a bunch but at least the company gives you information. I've heard numerous people who buy Chinese phones and are stuck with whatever software they offer.
Yeah there is no chance to write a custom rom because the kernel source is never being given by Mediatek.
However having the ability to backup and play around with the stock firmware is great.
Robert Hall said:
Yeah there is no chance to write a custom rom because the kernel source is never being given by Mediatek.
However having the ability to backup and play around with the stock firmware is great.
Click to expand...
Click to collapse
True, I like how it has become a meme that "I'll die before mtk releases their sources".
Any more news on this? Loving my N4 so far, but would like to install TWRP and gapps, but not quite sure how. Have read somewhere that Kingroot has worked on other Qiku/360 phones but haven't got that far myself. Any chance you could send me that link to me too, your googling skills are clearly far superior to my own!
Hi.
I wiped my data from the stock recovery and now i am stuck at boot logo.I don't know how that happened.but i think i have to flash stock firmware which i cant find anywhere.
Qiku forum is unresponsive and there is no other place with info of this rare phone.
Help me out here please
help me please! I.want to unlock my QIKU N4S, but i can not download from chinese forum. thank you a lot！
Bootloader unlock - HERE
Found some ROM's also .... Althought, You'll Need TAMPERMONKEY and Baidu Download Script for Tampermoney
ROM'S - HERE and other Tools + rom's HERE
There is a whole Qiku N4 forum but it's in chinese .... didnt have time to bother with it,
since it requires to be registered ...
And, as bonus ...
I found Russian modified ROM's ....
HERE for HW version A01
and
HERE for HW version M02
TWRP Recovery - HERE
Check HW version of your phone, if you want to flash roms and BEFORE screwing it up.
Hope that's enough for now ....
p.s. Be carefull what are you doing and flashing into phone. Links I posted are from third party sources,
people reported they are working, but all you do - you do on your own responsibility.
b.r.
Alex
mobilexpert said:
Bootloader unlock - HERE
Found some ROM's also .... Althought, You'll Need TAMPERMONKEY and Baidu Download Script for Tampermoney
ROM'S - HERE and other Tools + rom's HERE
There is a whole Qiku N4 forum but it's in chinese .... didnt have time to bother with it,
since it requires to be registered ...
And, as bonus ...
I found Russian modified ROM's ....
HERE for HW version A01
and
HERE for HW version M02
TWRP Recovery - HERE
Check HW version of your phone, if you want to flash roms and BEFORE screwing it up.
Hope that's enough for now ....
p.s. Be carefull what are you doing and flashing into phone. Links I posted are from third party sources,
people reported they are working, but all you do - you do on your own responsibility.
b.r.
Alex
Click to expand...
Click to collapse
if you want root your phone,you must use ROM V019
mobilexpert said:
ROM'S - HERE and other Tools + rom's HERE
Click to expand...
Click to collapse
Hello Alex,
Those links are sadly down.
Do you know any other link to a stock N4 image and scatter file that I could use to factory-reset a pattern-locked N4 ? I got my hands on a discarded one, but the factory reset option in recovery mode requires that cloud account be first deleted, which I can't to because of the pattern lock.
Thanks !
EDIT :
Sorry, I spoke too fast. I gave another try and the links are up, though in chinese. I'll try to get what I can. Thank you !
I am Chinese
Robert Hall said:
I hope this is the right thread.
Hello bois, I got a QiKU 360 N4 which is a pretty sick phone for the money I paid it.
It came out recently on the chinese market and its bootloader is locked.
I googled a bit and found some tutorials tho unlock the bootloader and install TWRP, because somebody compiled that already! Awesome, right?
Too bad are in chinese, yeah.
Google translate doesn't help that much, it is incomprehensible, and even if it did help: I am required to sign up to the chinese forum to read the whole tutorial (which requires me to understand how to sign up) and from what I understand the procedure makes use of a software running on windows to enter the bootloader and such software is in chinese only!
So I am looking for some kind soul who could translate the procedure and, if possible, reupload the necessary files somewhere so people like me wouldn't have to sign up to the linked chinese forum to get them.
In exchange I can offer some tips on health and fitness for I have a master in sports sciences. Or, I could offer you a beer?
P.S. sadly xda does not allow me to post links, can link in private... I guess.
Click to expand...
Click to collapse
Hello Is the 360n4 on your hand still there? I can help you with the problem!
1915007283 said:
Hello Is the 360n4 on your hand still there? I can help you with the problem!
Click to expand...
Click to collapse
Hi !
I'm not the original poster, but am in the same situation, and have a N360 at hand. Are you willing to help me ?
Hello
breversa said:
Hi !
I'm not the original poster, but am in the same situation, and have a N360 at hand. Are you willing to help me ?
Click to expand...
Click to collapse
Is the cell phone on your hand 360n4? This cell phone has two versions of 360n4 and 360n4s
Yes, it a 360N4, not a 360N4S.
What I'm trying to do is follow that howto : http://www.cnroms.com/360-n4-061-unlock-bootloader-install-twrp-recovery.html to downgrade it, then factory reset it and install TWRP.
However, I can't read chinese (can't even tell whether it's cantonese or mandarin). Google Translate helps, but most link seem to be broken, and when they're not, the download speed is abysmally slow (several days…).
Is there any way you could help me ? Maybe get the needed files and reupload them somewhere faster ?
I see
breversa said:
Yes, it a 360N4, not a 360N4S.
What I'm trying to do is follow that howto : http://www.cnroms.com/360-n4-061-unlock-bootloader-install-twrp-recovery.html to downgrade it, then factory reset it and install TWRP.
However, I can't read chinese (can't even tell whether it's cantonese or mandarin). Google Translate helps, but most link seem to be broken, and when they're not, the download speed is abysmally slow (several days…).
Is there any way you could help me ? Maybe get the needed files and reupload them somewhere faster ?
Click to expand...
Click to collapse
We have a lot of links, and if you have QQ, I think I can give you faster links
Because I don't know what tools you use to chat
1915007283 said:
We have a lot of links, and if you have QQ, I think I can give you faster links
Because I don't know what tools you use to chat
Click to expand...
Click to collapse
QQ ? What's that ?
In case your links are private, why not using private messages on this here forum ?
I'm sorry
breversa said:
QQ ? What's that ?
In case your links are private, why not using private messages on this here forum ?
Click to expand...
Click to collapse
I just came to this forum, I still don't know how to send messages