Database Info

[SOLVED] Fastboot USB not working

Hello,
I got a strange problem: my phone does not accept adb or fastboot commands sent from my pc anymore. The screen says FASTBOOT when connected in fastboot mode to the pc, but the USB appears only after I move the cursor up or down (push the volume button up or down).
The command line on windows states "Waiting for device...". The driver seems broken. In Device Manager (Windows) it says "Other devices -- Android Phone" with an exclamatin mark. A driver update fails.
I am running CM alpha 12 on a HTC One S (S4). The phone was not connected to my pc while on stock. The Android SDK is installed on the pc and up to date.
The phone is running fine besides the lack of usb access in any way. Charging works fine.
Any suggestions appreciated.
Burkhard

I had the same issue too. I wantet to push a recovery and my pc could not find my device. I reinstalled htc sync and then found the drivers in c:/programs/htc/sync drivers
Sent from my HTC VLE_U using xda premium

SOLVED
I'm delighted it worked. Thank you. I should have tried this before, but I did not think of installing HTC sync. Will keep that in mind.

hello
i have got a seriuos problem,i just booted my phone to fastboot to flash a boot.but when i rebooted to bootloader fastboot usb just dissapears.when i used cmd using adb it says waiting for the device....
anyone please help me from this problem:cryinglease.....................
my device is htc one v,
this problem occurs when am using cm10,and i want to use my stock rom again.
please help me to solve this problem:crying:

udhayababu said:
hello
i have got a seriuos problem,i just booted my phone to fastboot to flash a boot.but when i rebooted to bootloader fastboot usb just dissapears.when i used cmd using adb it says waiting for the device....
anyone please help me from this problem:cryinglease.....................
my device is htc one v,
this problem occurs when am using cm10,and i want to use my stock rom again.
please help me to solve this problem:crying:
Click to expand...
Click to collapse
You have the HTC One V? These forums are for the One S. They are more likely to give better advice

Please need help....!!!!
I accidentally formatted my internal storage , cache , data, system and everything.
I cannot able to mount the USB and not even fastboot as it is saying waiting for device. My bootloader is the only thing thats working, not even my philz recovery is of no use . adb is not recognizing my phone . please help
Please let me know about any solution for the problem

Has your problem solved ir not...???
herzbert said:
Hello,
I got a strange problem: my phone does not accept adb or fastboot commands sent from my pc anymore. The screen says FASTBOOT when connected in fastboot mode to the pc, but the USB appears only after I move the cursor up or down (push the volume button up or down).
The command line on windows states "Waiting for device...". The driver seems broken. In Device Manager (Windows) it says "Other devices -- Android Phone" with an exclamatin mark. A driver update fails.
I am running CM alpha 12 on a HTC One S (S4). The phone was not connected to my pc while on stock. The Android SDK is installed on the pc and up to date.
The phone is running fine besides the lack of usb access in any way. Charging works fine.
Any suggestions appreciated.
Burkhard
Click to expand...
Click to collapse
Hay dear has your problem solved.??
If solved then how.by which method pleas tell me because i am facing the same problem. Thanks in advance

I don't know how he solved but this guide on xda worked for me!
http://forum.xda-developers.com/showthread.php?t=2858337
[GUIDE] Fix Fastboot on Windows 8.1 [Latest fix as of 8/25/14]
Sent from my One S using XDA Free mobile app

faisal459459 said:
Hay dear has your problem solved.??
If solved then how.by which method pleas tell me because i am facing the same problem. Thanks in advance
Click to expand...
Click to collapse
Hello Faisal,
I (re-)installed HTC sync software (as I said in post #3). That is all of the story.
Hope this solves your problem too.

[Q] my laptop can't detect my Sensation

Dear xda devs,
I used to be able to connect my phone normally to my PC (adb, storage mount, etc). But now suddenly when I connect my Sensation to my laptop, it doesn't detect it as a device. It only charges the phone but gives no option of storage mount or debugging.
Any idea which driver might go wrong and where can I obtain the correct one?

check htc drivers or install htcsync.it might help

rzr86 said:
check htc drivers or install htcsync.it might help
Click to expand...
Click to collapse
installed it but still not detected...

update: it worked after I uninstalled HTC Sync and reboot my laptop

flamechamp said:
update: it worked after I uninstalled HTC Sync and reboot my laptop
Click to expand...
Click to collapse
good news mate.very happy for you:good:

After I succesfully flashed Apacha's kernel and flash bootimg using fastboot command in my laptop (usb is working) suddenly today my laptop can't detect my sendation again!
HELP PLS!
Sent from my HTC Sensation Z710e using xda app-developers app

Fastboot Not Recognized

Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.

chriscerv90 said:
Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2066805
Hope this helps.
AT&T HTC OneX
Android 1.1.1
ViperXL

Venomtester said:
http://forum.xda-developers.com/showthread.php?t=2066805
Hope this helps.
AT&T HTC OneX
Android 1.1.1
ViperXL
Click to expand...
Click to collapse
Thanks for the reply. That linked me to all the threads I went through by searching myself. I was just taking a stab to see if anyone had a new solution. Weird that this just started for me. VERY FRUSTRATING.

Windows XP makes life easier

chriscerv90 said:
Thanks for the reply. That linked me to all the threads I went through by searching myself. I was just taking a stab to see if anyone had a new solution. Weird that this just started for me. VERY FRUSTRATING.
Click to expand...
Click to collapse
Did you try searching resolutions at Microsoft?
http://technet.microsoft.com/en-us/library/cc725873(v=WS.10).aspx
AT&T HTC OneX
Android 4.1.1
ViperXL

Venomtester said:
Did you try searching resolutions at Microsoft?
http://technet.microsoft.com/en-us/library/cc725873(v=WS.10).aspx
AT&T HTC OneX
Android 4.1.1
ViperXL
Click to expand...
Click to collapse
Thanks for the tip lol
I tried similar steps.
I did a fresh install of windows too. I know I am a little obsessive. Still can't get the dang thing to be recognized in fastboot.

chriscerv90 said:
Thanks for the tip lol
I tried similar steps.
I did a fresh install of windows too. I know I am a little obsessive. Still can't get the dang thing to be recognized in fastboot.
Click to expand...
Click to collapse
I know this may sound silly at this point but did you try moving it to a different usb port? I have seen that work before.
AT&T HTC OneX
Android 4.1.1
ViperXL

try using this application if you think your device drivers are dirty but installed correctly for usb devices
USBDeview just uninstall whatever devices you want reinitialized especially since they can change even with rom changes so it is good to clear some old ones out by sorting them based on Last Plug/Unplug Date.

I had to use a different Micro-USB cable to get it work. Try that.

Yeah I actually have tried all those steps. Thanks for the replies guy. I check out that application.
I'm starting to think something is wrong with my HOX
Sent from my HTC One X using xda app-developers app

DvineLord said:
try using this application if you think your device drivers are dirty but installed correctly for usb devices
USBDeview just uninstall whatever devices you want reinitialized especially since they can change even with rom changes so it is good to clear some old ones out by sorting them based on Last Plug/Unplug Date.
Click to expand...
Click to collapse
This FREAKING WORKED!!!!!!!!!! HAHAHA Thanks man ... I've only had 2 hours of sleep trying to fix this stupid problem... I owe you one man. :highfive:

glad you got it fixed, check out his other apps they are life savers and they work how "real" windows apps should work.

I have the same problem
chriscerv90 said:
This FREAKING WORKED!!!!!!!!!! HAHAHA Thanks man ... I've only had 2 hours of sleep trying to fix this stupid problem... I owe you one man. :highfive:
Click to expand...
Click to collapse
I have the the same problem my computer does not recognise the device ( htc one x endeavour) and in fastboot mode it does not work.
pls help
how you solved this ??

abhilashlinge said:
I have the the same problem my computer does not recognise the device ( htc one x endeavour) and in fastboot mode it does not work.
pls help
how you solved this ??
Click to expand...
Click to collapse
If your on Windows 8 problems will occur but there are methods you need to look into. Windows 7 is your ally.
First Uninstalled the drivers for the device using the program in the previous post. Second, make sure your cable is working correctly. Third, make sure you have the correct drivers for you phone on the computer - - HTC Sync causes problems sometimes. Fourth, plug in the phone in while it's on and let the drivers install correctly. Fifth, place the phone in fastboot and let drivers install. Should work.
Remember sometimes you need to restart your computer and try different USB ports. Some users have said 3.0 ports cause problems.
Good luck.
Sent from my SM-N900A using XDA Premium 4 mobile app

chriscerv90 said:
Ok guys, sorry to start another thread on this but I have been going through thread after thread and searching endlessly for a solution and nothing has worked for me.
I was getting ready to do the S-Off procedures and my device is recognized by computer to transfer files, and adb recognizes the device as well, I was able to get the device ID. Reboot into bootloader and fastboot just hangs there and no fastboot usb. try to enter fastboot command and it just hangs at "waiting for device"
I started going crazy and uninstalled drivers. Installed HTC Sync, (never needed it before). Now when I plug in USB while in Fastboot computer recognizes device but says it is not working properly.
Under device manager > Android USB Devices > (Yellow triangle) My HTC > Device Status ( This device cannot start Code 10), (A request for the USB BOS descriptor failed). Driver version 2.0.7.14. I try to update the driver manually and it says "It appears the right driver is already installed." Tried disabling enabling. Unistalling, plugging back in. Nothing seems to work.
Running Viper 3.2.3
Windows 8 (didnt have the problem before using fastboot)
Sorry for long post. Thanks in advance.
Click to expand...
Click to collapse
I ws installing a Ruu zip but process got failed and hboot version changed to 1.54.000 . my device is in now relocked status and bootloader is not reconised by hp envy. adb still showing my device my i lost fastboot mode completely. Any solution there???
I already tried several drivers method. Error is something HTCAND4 in driver events log.

What did u do?

[q] twrp 2.5.0.0

Hello,
I followed Hasoon's all-in-one root toolkit and flashed the included TWRP 2.5.0.0 onto my AT&T HTC One X. Now I cannot do anything, whatever I do, it tells me "Unable to mount /cache". Could you please help me? I can't mount the sdcard to the computer either, so I am sort of stuck.
Thanks!
Simone

simsale said:
Hello,
I followed Hasoon's all-in-one root toolkit and flashed the included TWRP 2.5.0.0 onto my AT&T HTC One X. Now I cannot do anything, whatever I do, it tells me "Unable to mount /cache". Could you please help me? I can't mount the sdcard to the computer either, so I am sort of stuck.
Thanks!
Simone
Click to expand...
Click to collapse
Can you format the SD card in TWRP?

exad said:
Can you format the SD card in TWRP?
Click to expand...
Click to collapse
I was able to wipe it. However, it still gave all these same unable to mount /cache error messages. The data is gone though.
When I connect the mounted device to the computer it still doesn't recognize it.
Thanks!
Simone

simsale said:
I was able to wipe it. However, it still gave all these same unable to mount /cache error messages. The data is gone though.
When I connect the mounted device to the computer it still doesn't recognize it.
Thanks!
Simone
Click to expand...
Click to collapse
Does the PC not recognize that anything is connected or does it detect that its plugged in but can't find the driver?
What rom is currently installed on the phone?

exad said:
Does the PC not recognize that anything is connected or does it detect that its plugged in but can't find the driver?
What rom is currently installed on the phone?
Click to expand...
Click to collapse
Currently I think it recognizes the phone as a media device (or similar, I forgot the name), not as a disk drive. I am on a Mac, and I have Android File Transfer installed, which then tells me that the device cannot be opened. On Windows it couldn't be opened either although it talked about a driver issue. I currently only have a Mac, but from Monday I could work on a Windows machine again.
The ROM currently being installed is the original AT&T provided ROM.
Thanks so much!
Simone

simsale said:
Currently I think it recognizes the phone as a media device (or similar, I forgot the name), not as a disk drive. I am on a Mac, and I have Android File Transfer installed, which then tells me that the device cannot be opened. On Windows it couldn't be opened either although it talked about a driver issue. I currently only have a Mac, but from Monday I could work on a Windows machine again.
The ROM currently being installed is the original AT&T provided ROM.
Thanks so much!
Simone
Click to expand...
Click to collapse
What version? IS it already installed on your phone? I'm trying to find out if you require MTP drivers or not. Latest version of sense/stock Roms require MTP driver to access the SD card.
In any case I wouldn't suggest using any version of TWRP above 2.3.3.1
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.

exad said:
What version? IS it already installed on your phone? I'm trying to find out if you require MTP drivers or not. Latest version of sense/stock Roms require MTP driver to access the SD card.
In any case I wouldn't suggest using any version of TWRP above 2.3.3.1
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.
Click to expand...
Click to collapse
I see, this all sounds like I need to wait for a windows machine.
I am not sure what ROM version, unfortunately. I bought the phone in December from AT&T, and it all looks like it asks for MTP drivers. I will try this with a Windows machine and then get back to this post - thank you so very much for your help.
Simone

simsale said:
I see, this all sounds like I need to wait for a windows machine.
I am not sure what ROM version, unfortunately. I bought the phone in December from AT&T, and it all looks like it asks for MTP drivers. I will try this with a Windows machine and then get back to this post - thank you so very much for your help.
Simone
Click to expand...
Click to collapse
Yes, you would need mtp drivers for the latest software version. They are included with the latest HTC sync.

exad said:
Yes, you would need mtp drivers for the latest software version. They are included with the latest HTC sync.
Click to expand...
Click to collapse
Alright, I have tried this with the latest HTC Sync manager: the MTP Drivers however won't install. I have tried with the One X+ of my Dad (which is also brand new, so probably requires the newest version also), and it installs fine and appears as a media device in the explorer. Mine however does not do anything, and driver installation says it fails to install the driver. I have tried manually installing the drivers, however, it seems to have to do with the phone because when I disconnect it suddenly Windows 7 is able to install those drivers, and as mentioned before it also works with a functional phone.
Next week I will be back at work and I have a Windows 8 machine there. I don't have high hopes that it works there, but since there seems to be an MTP driver issue with Win7, maybe there's a chance.
Is there anything else I could do?
Thanks!
PS: don't use your vacation time to root your phone...haha.

simsale said:
Alright, I have tried this with the latest HTC Sync manager: the MTP Drivers however won't install. I have tried with the One X+ of my Dad (which is also brand new, so probably requires the newest version also), and it installs fine and appears as a media device in the explorer. Mine however does not do anything, and driver installation says it fails to install the driver. I have tried manually installing the drivers, however, it seems to have to do with the phone because when I disconnect it suddenly Windows 7 is able to install those drivers, and as mentioned before it also works with a functional phone.
Next week I will be back at work and I have a Windows 8 machine there. I don't have high hopes that it works there, but since there seems to be an MTP driver issue with Win7, maybe there's a chance.
Is there anything else I could do?
Thanks!
PS: don't use your vacation time to root your phone...haha.
Click to expand...
Click to collapse
OK, so on Windows 8 I am able to install the driver, and it does not fail like in Win7, but I still can't access the mounted storage. The message of the device is:
This device cannot start. (Code 10)
The process hosting the driver for this device has terminated.​
Is there anything else I can do, or should I rather get a new phone?

simsale said:
Is there anything else I can do, or should I rather get a new phone?
Click to expand...
Click to collapse
Did you do all of what exad said in his earlier post (quoted below) already?
exad said:
So, I would download twrp 2.3.3.1 and check the md5
then fastboot flash recovery recoveryfilename.img
fastboot erase cache
fastboot reboot-bootloader
select recovery from bootloader then try to mount sdcard with twrp.
Click to expand...
Click to collapse

lauterm said:
Did you do all of what exad said in his earlier post (quoted below) already?
Click to expand...
Click to collapse
Yes, in fact, I cannot connect to the phone with this strange driver issue, which means none of the commands actually do anything.

simsale said:
Yes, in fact, I cannot connect to the phone with this strange driver issue, which means none of the commands actually do anything.
Click to expand...
Click to collapse
Are you rebooting to bootloader to do the fastboot commands? In bootloader it should say Fastboot in red. Then after a couple seconds that should change to Fastboot USB. I don't think fastboot needs the specific drivers to be on the PC like mounting the SD card requires.

lauterm said:
Are you rebooting to bootloader to do the fastboot commands? In bootloader it should say Fastboot in red. Then after a couple seconds that should change to Fastboot USB. I don't think fastboot needs the specific drivers to be on the PC like mounting the SD card requires.
Click to expand...
Click to collapse
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!

simsale said:
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!
Click to expand...
Click to collapse
You are definitely doing something wrong. fastboot commands only work within bootloader/fastboot and adb commands only work while the rom is loaded up or in sideload mode in TWRP. It's assumed you know this prior to rooting.

simsale said:
Well, when I turn on the phone, all I get is the TWRP interface. Mounting from there doesn't do anything. I am not in fact in bootloader. Maybe I am doing something wrong here!!
Click to expand...
Click to collapse
Turn off the phone. Then hold volume down and briefly press the power button. Don't let go of volume down until it gets to the boot loader screen. Wait for fast bot USB to display. Then you can try exad's fast boot commands.
Sent from my One X using xda app-developers app

lauterm said:
Turn off the phone. Then hold volume down and briefly press the power button. Don't let go of volume down until it gets to the boot loader screen. Wait for fast bot USB to display. Then you can try exad's fast boot commands.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Oh, thanks so much. I actually did know this from rooting my old phone - I guess I forgot.
It doesn't go into Fastboot USB though, stays at Fastboot. Is there another trick? Thanks so much!

use cwm

simsale said:
Oh, thanks so much. I actually did know this from rooting my old phone - I guess I forgot.
It doesn't go into Fastboot USB though, stays at Fastboot. Is there another trick? Thanks so much!
Click to expand...
Click to collapse
It should change to FASTBOOT USB if you are plugged into a computer. If you connected to the computer after you got to bootloader mode, you might have to press volume up or down to get it to switch to FASTBOOT USB Maybe this is the root of your problem. Have you tried multiple USB cables? Is there any crud in the micro-USB port on your phone? It's a little odd that the micro-USB port would break in a manner that charging would still work but not data connections, but I'm starting to wonder if that isn't the case.

lauterm said:
It should change to FASTBOOT USB if you are plugged into a computer. If you connected to the computer after you got to bootloader mode, you might have to press volume up or down to get it to switch to FASTBOOT USB Maybe this is the root of your problem. Have you tried multiple USB cables? Is there any crud in the micro-USB port on your phone? It's a little odd that the micro-USB port would break in a manner that charging would still work but not data connections, but I'm starting to wonder if that isn't the case.
Click to expand...
Click to collapse
OK, I managed to get into Fastboot USB and now have the SDcard mounted. I'll try flashing a new ROM now. Is this one you'd recommend?
http://forum.xda-developers.com/showthread.php?t=1868236&highlight=+rom+
Thanks so much!!
Simone

[Q] Nexus 5 does is dead???

I installed latest CM rom and unfortunately xposed framework on top.
after that my device does not start and seems to stack in CM logo for ever.
I can get to recovery but does not find any backup files! Seems like scdard is empty or not recognizable.
I tried to push a new rom for with adb from fastboot but my pc does not seems to find the phone. Like adb debugging is not enabled on the phone.
I also fails when I try to erase the device from recovery.
Any help is welcome.

Boot in fastboot and flash a factory image. Best way to fix pretty much anything.

mortenmhp said:
Boot in fastboot and flash a factory image. Best way to fix pretty much anything.
Click to expand...
Click to collapse
does for find the device any more, so i cannot flash anything

Try to reinstall the universal drivers, and try different usb ports on your computer.

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
You need to make sure you're in the bootloader.

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
Hi, your phone is ok, just empty. the problem is on the computer. You need to fix the driver for nexus 5. You probably have them installed since you unlocked the phone. just keep your phone connected and on recovery mode.
go to device manager, look for nexus 5. Choose "update driver"
"Browse my computer for driver...,
"let me pick from a list of device drivers"
choose any ADB driver, and install it.
Many more ways to do it

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
If it can boot to the bootloader, and it still cant find the device, the problem is either with your computer(driver) or with the usb hardware on the phone(highly unlikely since it happened after you messed with software)

mortenmhp said:
If it can boot to the bootloader, and it still cant find the device, the problem is either with your computer(driver) or with the usb hardware on the phone(highly unlikely since it happened after you messed with software)
Click to expand...
Click to collapse
problem solved.
i tried the exact same process on my imac and worked perfectly!
( i had already reinstalled the drivers on my pc with no luck...)

sprkrt said:
problem solved.
i tried the exact same process on my imac and worked perfectly!
( i had already reinstalled the drivers on my pc with no luck...)
Click to expand...
Click to collapse
He he this deserves a headline
Apple recovered my nexus from death lmao
Glad that you worked it out.
Sent from my Nexus 5 using Tapatalk