I rooted my LG P 350 with Gingerbreak, and i set up CyanogenMode 7.2. Phone worked whole day, but when i connected phone to PC it was in debugging mode, so i try to disable it and my phone just showed me a black screen. No i can't start Android, all I get is Linux penguin in the top left corner. How can i fix it? Thank you.
Have you tried rebooting from recovery. Simply pull back your battery and put it back again, and press the power, call button and the volume down button to start your ph in recovery mode. Just select reboot button from there. If it doesn't work, you may need to reflash your cm rom.
Sent from my LG-P350 using xda app-developers app
Related
I'm new to Android and had my phone rooted everything seems good with the root but as soon as I go into rom manager and try to go into recovery mode I get the white HTC screen then starts to turn kinda brownish then black and will stay like that until phone is shut off. Please help I can't download any custom roms due to this I'm guessing. Thanks
Open Rom manager again. Press the option at the top to flash the recovery. After its done try to boot into recovery again.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Ya I tried that already a few times and still does not work also changed the clockworkmod recoveries and nothing
Have you tried booting into recovery manually by holding volume down and pressing the power button? I find this way is more reliable that ROM manager.
Is there a trick to that I tried it my phone vibrates and get the power off option but no reboot to recovery thanks
Have you turned fastboot off? settings - applications - remove check from fastboot
Make sure fastboot is off, like the poster above me said. Turn your phone off. Hold the volume down and press the power button. You should then be able to scroll down and select recover.
All you guys are awesome the headache is gone it worked thanks very much
actually when i go into recovery i still get that htc screen that turns black and will frezze up
Did you use Bubby323's root method? That is what it sounds like. If you did, then read the FAQ. There is a fix for this graphical error.
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
I thought I'd done something wrong with my G2x because that happened to me too. Remove your battery and USB. Then insert your battery again. When you turn it on, make sure to hold both the power button and the volume down button until you see text that says android. If you, like me, thought you just had to hold the volume down and tap the power button (like my Nexus One), that might be your issue.
Sent from my Nexus One using Tapatalk
just disconnect usb, and go to recovery Power+vol down...
.....and congrats !
yep, I thought I bricked it too.. When you were done at the green screen where it said press any button, thats where you press whatever you want and then unplug the cord. Then, put the battery back in and hold down vol then power, don't let go until "android" pops up.. You did it man, just missing your last step..
Moved to proper forum
I can get to the Recovery screen, but I cant select any of the options....volume lets me scroll, but cant find anything to select any of the options....kinda new at this
power button to 'action' your selection... at least it works for me.
usajlh said:
My phone is currently sitting with a "S/W upgrade" screen after a series of stupid events. I flashed recovery using ROM Manager before I had read that it fake flashed. I rebooted into recovery and installed CM7 nightly. Rebooted and it's stuck in a boot loop. So I finally see all the warnings against that so I figure I need to get a real recovery so I use the awesome guide from TGA_Gunnman. I follow all the instructions and it appears from the log on my PC that the CM recovery flashed successfully. I pull the cord, reinsert my battery and my phone just sits in the S/W upgrade screen. It's been like that for 30 minutes now.
What do I do?
Click to expand...
Click to collapse
The "S/W upgrade" stays on, that's normal. See if your terminal window has completed whatever stuff it is doing. If you get a completed message, you are good to go and can safely pull out the USB chord even if your phone still says "S/W upgrade". Put back your battery and hold Power+Vol DOWN button and see if you get into cmw recovery.
so im trying to fix my friends phone and this is weird..
im able to go to cwm, wipe it all and flash a new rom.. it flashess successfully but when i reboot it goes back to the s/w update screen..it happens with any rom i flash.. its been sitting there for a while.. how long should i wait?
Once you flash the ROM you shouldn't be getting that screen...Does your friend has the G2x or 2x and which ROM did you flash?
Sounds like you screwed up the boot image. Go into APX mode again and reflash the recovery package making sure it completes, you hit a key to close the terminal window, and you hold the volume buttons the entire time. Then go into recovery and factory reset and clear the Dalvik cache. Then if you still get the S/W update screen you are going to need to go to the thread about fixing bricked phones and use the KDZ method to reflash the entire GB OTA package. There is also a new method to reinstall the entire OTA package using NVFlash but you have to hold the volume buttons down for about ten to fifteen minutes while everything flashes.
my phone is canadian version of g2x, p-999dw (wind mobile)
my phones not bricked turns on but stuck at team eagle blood after trying to upgrade to ICS 4.0.3 fallow instructions online i screwed up now i need help
when i get stuck on logo power + volume up will = hard restart after i hold and press for 5 sec.
power + volume down at boot screen hold tell recovery, this is where i need help because these are the functions on my phone in the system recovery version <3e>
volume control = up/down
home key = menu display enable/disable
and i don't have a batten on my phone to select any options
so how can i fix my phone used just my computer?
please i need help by the end of work today!!!!
Use the volume keys to navigate through the options then use the power button to select the option that you need.
Sent from my LG-P999 using XDA
try nvflash'in it again.. that will resolve you.
i've tried the power batten it really does nothing at all....
When you're scrolling down and hit the bottom of the menu and it goes back to the top if you do it a few times it says the buttons were disabled and you have do it again a few times to re-enable them. You wouldn't happen to be disabling the buttons and that why it doesn't work? You could also try using the touch version of CWM
Do you have rom manager installed rite?
Sent from my LG-P999 using XDA
man i dont have anything on my phone i cant load it, ive tried to load ATX mode but it is a no go
im stuck with the TEAM EB logo stuck on my phone ive powered down tried to get to recovery but i can not select any options i can only display them
and yes my power button still works valume up + power hold for 5 sec reboots the phone
Ive tried valume up and down insert USB and it wont load axt mode...
can i fix this threw my computer because im having a hard time running nvflash....
Hey bro, the search button is the select button...and your phone is the same as Tmobile here in the states. Still a great phone.
xBkKx said:
When you're scrolling down and hit the bottom of the menu and it goes back to the top if you do it a few times it says the buttons were disabled and you have do it again a few times to re-enable them. You wouldn't happen to be disabling the buttons and that why it doesn't work? You could also try using the touch version of CWM
Click to expand...
Click to collapse
well this would be nice but i cant load my phone so i cant change anything
and im using the android system recovary <3e> not clockworksmod because clockworksmod isnt installed any more
please help....
g1-and-only said:
Hey bro, the search button is the select button...and your phone is the same as Tmobile here in the states. Still a great phone.
Click to expand...
Click to collapse
the only button that works man is the home button... and it just pulls up the menu or hides it
my search button will not do anything...
ive tried every button
ok well apx mode started on my phone
s/w upgrade
please wait while upgrading
now i dont have any apx drivers on my computer please help
ok good!!! i restarted my phone and i got APX mode to load on the computer now
thanks to everyone who replyed
I just rooted my One S using this thread: http://forum.xda-developers.com/showthread.php?t=2008440. I flashed Clockworkmod touch recovery and installed the latest CM10 Nightly. I ended up installing the standard Clockworkmod recovery (non touch) through ROM manager once my phone was up and running. Everything on my phone was working great until I let my battery run all the way down to the point my phone shut off. I plugged my phone in and it automatically booted to recovery. I waited a little bit for the phone to charge and selected "reboot system now" from recovery. My phone did not boot and only goes to recovery. When it reboots, it briefly flashes a green stripe twice in the upper third of the screen prior to booting all the way but never shows the HTC screen or anything other than recovery. I tried reflashing the ROM in recovery, formatting every partition in recovery, entering fasboot using ADB, rebooting using ADB, and nothing seems to get my phone to do anything other than boot to recovery. I tried running the latest RUU and it fails (presumably because it can't enter fasboot). I tried pressing and holding volume+, -, and the power button at the same time, I tried holding just the volume down button while holding the power button, but no luck so far.
Is there a way to reflash the recovery from ADB while the phone is in recovery? Is there any other way I can force my phone into fastboot? Can I safely use the method in this thread http://forum.xda-developers.com/showthread.php?t=1990043 to "unbrick" my phone by entering commands via ADB shell while in recovery rather than in terminal emulator? Thanks in advance for all the collective XDA wisdom that I'm sure will help get my phone back up and running.
Hey I had the same problem about a week ago. Are you sure you used the latest the RUU file?
chilaca91 said:
Hey I had the same problem about a week ago. Are you sure you used the latest the RUU file?
Click to expand...
Click to collapse
I'm using RUU_Ville_U_ICS_40_S_TMOUS_2.35.531.7_Radio_1.08ts.50.02.16_10.08e.50.04L_release_279577_signed.exe. I don't think it would matter which one I used though because it gives me an error that says it can't connect to the phone.
Try holding down the power button for 10 sec and then let go of the power and hold down the volume button. I had to do this a couple of times until I finally got into the bootloader
Sent from my One S using xda app-developers app
chilaca91 said:
Try holding down the power button for 10 sec and then let go of the power and hold down the volume button. I had to do this a couple of times until I finally got into the bootloader
Sent from my One S using xda app-developers app
Click to expand...
Click to collapse
Amazing! That did the trick. Thanks a ton for that info. I knew it would be something simple.
I also had a similar problem. Seemed to occur only when I had the USB cable plugged into the phone. Once I removed it, I could then get into fastboot. Once I was in fastboot, I simply plugged the USB cable back in, and everything worked flawlessly.
All that crap you got wouldn't have happened if you use TWRP instead of CWM.
The CWM file in my Infuse 4g is corrupt. When holding down volume up + volume down and pressing power button; CWM restore comes up but is garbled. I can not use it. Is there anyway to solve this? The phone is bricked.
That is due to missing GB bootloaders. Search around and you will find how to flash them on download mode.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
Do what andros11 said above
Sent from my SGH-I997 using xda premium
dlw1146 said:
I've been at it all day with no luck.
Went to the page suggested and could not get it to work.
Went to several more with the same luck.
Heimdall can't detect it. Odin can't detect it.
However, adb devices finds it.
adb reboot works but gets the same garbled up screen again and again.
Downloaded 3e_recovery_no_sig_check.zip
Installed it by adb push ... adb reboot recovery gives me the same garbled up cwm recovery window.
Reinstalled it several times... same thing.
I really need some help.
I have no phone... landline or other wise.
What happened was;
Rooted the phone.
Use modmanager to install cwm and install a rom.
All seemed to go well. The instructions said the new rom would boot up twice then to add the gapps zip.
It just kept booting up over and over for over an hour. (looping)
When I did the 'vol up + vol down and press power button to go into recovery mode, I got the garbled up recovery screen.
That where the phone is right now. Nothing but a brick.
Any help greatly appreciated.
dlw2
Click to expand...
Click to collapse
You said you used "modmanager"... did you mean ROM manager? ROM manager doesn't play well with most of these ROMs. Could be part of the problem. Get rid if it and do what andros11 said.
Sent from my SGH-I997 using xda premium
she Mbrumbe
It's working! Thank you all.
dlw
What did you do to fix it?
Sent from my SGH-I997 using xda premium
Did as andros11 suggested.
Use qkster's uclb3 heimdall one-click twice, the second time with the bootloaders checkbox ticked on.
All went well.
Also, can I root with this update?
dlw
Follow instructions in the 2nd post in the following:
http://forum.xda-developers.com/showthread.php?p=23118144
Sent from my SGH-I997 using xda premium
Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw
dlw1146 said:
Having trouble getting into 'download mode' after flashing.
With data cable connected to PC and phone.
vol down + vol up + power = e3 recovery
vol down + power = normal boot
vol up + power = normal boot
Without data cable connected to phone same as above.
How do I get back into 'downoad mode'?
dlw
Click to expand...
Click to collapse
Pull battery
Put battery back in
Hold volume +/- at the same time
Connect phone to pc while holding volume
Sent from my HTC PH39100 using Tapatalk 2
Thanks a million.
dlw
Deleted.
Sent from my SGH-I997 using xda premium
If you know how to solder make a jig, They'll save you lots of time if you have trouble getting in to Download mode.
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
Or you can buy them cheaply on flee-bay