I rooted my phone with the quick root tool from noxious Nina. I want to flash a new kernel so overclocking is capable. can I just install and run the vzw ez unlock from the play store or do I have to completely flash a new Rom and all on my phone? any help would be appreciated. thanks.
The EZ unlock tool works great!!! Just make sure you flash the correct kernel.... AOSP kernel for AOSP base ROMs and a stock/touchwiz kernel for stock/touchwiz ROMs. Most of the ROMs floating around have a kernel built in specific to that ROM. Happy flashing and make a nandroid before anything!!!!
Sent from my SCH-I535 using xda app-developers app
I have everything backed up with TB. do you know of a good stable stock Rom kernel that can be overclocked.
Synergy is stable and good. I have been running that since the beginning. I am gonna jump to ParanoidAndroid this weekend since most of the bugs have been worked out. You can search around for the most compatible OC apps and methods. I normally leave things be unless I need to change them.
Sent from my SCH-I535 using xda app-developers app
Ok soooooooooooo I have another question. I'm looking at flashing clean kernel. I want to use vzw ez recovery. Has any one done just a kernel with this app and how did you do it. Just select your image and click flash or reboot recovery. I have done research on this but I have yet to find a solid answer on how to do it.
Sent from my SCH-I535 using xda app-developers app
I normally just reboot to CWM and flash away.... I don't use EZ for anything other than choosing recovery and unlocking the bootloader. If you're not on a custom ROM you can use EZ to boot into recovery after flashing the recovery of your choice.
Sent from my SCH-I535 using xda app-developers app
So if I use ez and flash into COM 6.0 then I can go into download mode with vol up home and power then just boot to any Rom that way?
Sent from my SCH-I535 using xda app-developers app
I don't know if it still applies but you aren't supposed to flash kernels with ez recovery.. I did that once and got stuck in a boot loop. That should be used for recoveries only. Use that to flash cwm and go to where you downloaded your kernel..most likely your download folder and flash it. But as stated before make sure your kernel applies to your ROMs tw=tw aosp = aosp no crossing. I personally still use cwm 6 although that was a recovery for kexec methods..it can still be used...for flashing ROMs make sure you know if you have to wipe data and cache as well. You can get into some nasty boot loops and bricks if you don't. I personally do a nandroid and then wipe everhthing then flash a new ROM...just a force of habit. I hope this helps..hit the thanks button if this helps you at all.
VZW SGSIII SynergyRom R60 w/Imoseyon's LeanKernel v0.5
---------- Post added 4th September 2012 at 12:06 AM ---------- Previous post was 3rd September 2012 at 11:59 PM ----------
Also to add to your question..you flash ROMs from cwm recovery. Download mode is used for Odin to flash stock ROMs and stock rooted ROMs. To boot into cwm from an off state its power volume up and home at the same time. From there back up using the backup option and once that is complete wipe data/wipe cache then go to install zip from SD card or ext SD card wherever you downloaded the new rom and flash that and don't panic if your phone doesn't boot up right away (hanging at the boot animation screen) the first boot always takes the longest.
VZW SGSIII SynergyRom R60 w/Imoseyon's LeanKernel v0.5
crackerhacker said:
So if I use ez and flash into COM 6.0 then I can go into download mode with vol up home and power then just boot to any Rom that way?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Boot into RECOVERY and wipe cache, wipe dalvik cache and Flash it.
I figured it all out yesterday. Running synergy r68 with ziggys kernel
Sent from my SCH-I535 using xda app-developers app
crackerhacker said:
So if I use ez and flash into COM 6.0 then I can go into download mode with vol up home and power then just boot to any Rom that way?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
You flash Rom in recovery not download mode..lol
Sent from my SCH-I535 using Tapatalk 2
Related
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
bfitzpatrickd2d said:
so i finally decide to grow a pair and root.... how ever when i try to install device drivers it says program unexpectily quit and closes however when i open odin i get a yellow box on teh top that says com something.. i am asuming that is what i need to see in order to see the flash works properly.. second just want to flash a stock rooted rom do a backup and then flash gummy charged newest version with kernal how do i go about doing this want to make sure my i are dotted t's are crossed etc...
Click to expand...
Click to collapse
sounds like it's connecting fine.. and you described it right, flash the stock rom in Odin first and boot up to make sure it works or do some minor set-up, then flash the latest 8/17 CWM in Odin and immediately boot into it after, make the backup then flash whatever rom/kernel you want (Gummy 2.0 has one included and will enable voodoo lagfix on first boot)
not that hard once you do it once or twice and kinda learn how it all works and whatnot
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
do you. mind shooting me a download. link. of stock rom and cwm what about kernals do I need to. flash a kernal or is. that included in stock. rom as well as gummy charged
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
CWM
http://forum.xda-developers.com/showthread.php?t=1112804
Stock (though not the latest as Gummy is based off the slightly older EP1W)
http://forum.xda-developers.com/showthread.php?t=1260214
Gummy 2.0/2.1
http://rootzwiki.com/topic/5643-romep1wcwmgummycharged-gbe-21-10242011/
GB Voodoo Lagfix Kernel (I'd recommend version 3.0.0+)
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
and no the stock rom does not include a custom voodoo kernel but the Gummy 2.0 package does so it will install the kernel and rom and enable voodoo lagfix on first boot (the Gummy rom package includes version 2.2.5 of that kernel I linked so it's a bit old, you can update it if you want by flashing the new one in CWM afterwards)
bfitzpatrickd2d said:
what about wiping sd card want to do a clean wipe that is a safe thing as long I format as fat 32 correct?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
you don't really need to format the sd card as everything android related (not phone #'s or pictures or anything *you* put on there) will be wiped when you do the wipes in CWM
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
and it doesn't matter what baseband I am on currently I just do what is listed above and thought about removing simple just to be safe
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man so. I am assuming I put. the. stock in the past. section wait. for. reboot. put. kernal in pda. reboot the put the cwm version in there
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
no no no stock rom in PDA first, boot up after the flash, power down and connect to Odin again and put CWM in PDA (everything goes in PDA) and flash then unplug phone after it passes and immediately boot into CWM no regular boot up.. then wipe data, dalvik (under advanced) and cache then flash Gummy or rom of your choice (custom rom build must match stock build like stock EP1W with EP1W Gummy 2.0), select reboot phone option and let the kernel activate voodoo lagfix when it boots up (may take a while)... once it starts you'll have a rooted voodoo custom rom, then you can hold the power button down until the reboot options menu comes up and select recovery to proceed to flash the updated kernel if you want
also the modems will be the ones installed with the stock rom, but you can flash new ones in Odin in the PDA section if you want
blazing through on my 4G Droid Charge
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
thanks man, normally not this causious but dont want to brick again someone linked a video so i will follow that.. sorry gor being a extreme noob ever thoigh im not
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
lol no problem and yeah its better to be careful at first.. also that guy's videos are good I should've thought to recommend them
blazing through on my 4G Droid Charge
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
bfitzpatrickd2d said:
one question if your still around i hope so anyway about the cwm.tar or what ever it is there were a lot of people haveing soft brick and brick issues with this but there was a cwm ver 4.008 will this work all i want to do is flash gummy charged and that is about it.
Click to expand...
Click to collapse
yeah that one will work fine, I use it since I don't do nandroid backups much.. I think there's a download link in the OP of that kernel thread at rootzwiki
blazing through on my 4G Droid Charge
sweet thanks
Sent from my SCH-I510 using xda premium
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
bfitzpatrickd2d said:
last time i flashed a rom for some reason the stock. recovery overwrote. cwm anything that you know. of that i can do. to avoid this in future?
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
probably because the rom didn't include a custom kernel or for whatever reason it didn't make it work.. flash or reflash a custom kernel and there won't be any more problems
blazing through on my 4G Droid Charge
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
capt8210 said:
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm not sure what you mean. You can do a backup of your current state, or you can flash a new rom from via zip file
If you have recovery your good to go. I do recommend doing a backup before you flash anything though just in case something goes wrong.
Dude everything you need is here
http://forum.xda-developers.com/showthread.php?t=1762709
Sent from my SCH-I535 using xda premium
capt8210 said:
Im rooted i download ez recovery flashed cwm 6. What else do i need to do ive been reading and people saying different things to do .
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Post #3 is correct...
OK..you are rooted and now have recovery CMW 6.0.1.0 which you flashed with ez recovery (all you need to do with that app, you are done with it). At this point just pick a rom that you want...example SynergyROM. All you would do is download the rom and place it on your SD card...I would recommend the extSDCard.
Boot your device into recovery by holding the buttons to do it or just open EZ recovery and hit button 'boot recovery' option only. Find the zip on ext card and that is it...
Always do a backup first which you can do in recovery before flashing the new rom and save that to your ext sdcard also which is an option in 6.0.1.0 after backup then flash new rom
Thank you all for the info
Sent from my SCH-I535 using Tapatalk 2
parcou said:
Post #3 is correct...
OK..you are rooted and now have recovery CMW 6.0.1.0 which you flashed with ez recovery (all you need to do with that app, you are done with it). At this point just pick a rom that you want...example SynergyROM. All you would do is download the rom and place it on your SD card...I would recommend the extSDCard.
Boot your device into recovery by holding the buttons to do it or just open EZ recovery and hit button 'boot recovery' option only. Find the zip on ext card and that is it...
Always do a backup first which you can do in recovery before flashing the new rom and save that to your ext sdcard also which is an option in 6.0.1.0 after backup then flash new rom
Click to expand...
Click to collapse
Do we even use Rom Mgr? I think this where I'm making mistakes.
You don't need to use Rom Manager. You have the EZ recovery that flashes a recovery. Rom manager does the exact same thing but EZ recovery makes it simple. Just do what post 3 says and you'll be fine. I just started using EZ recovery 3 days ago and I've already flashed a recovery and a custom kernel. The EZ recovery is only foe flashing recoveries...don't ever try to flash a custom Kernel through it. You can flash custom kernels through CWM Recovery the same way you flash custom rooms, but you need a recovery that supports kexec which would be CWM 6..which is what you have.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
95talondsm said:
You don't need to use Rom Manager. You have the EZ recovery that flashes a recovery. Rom manager does the exact same thing but EZ recovery makes it simple. Just do what post 3 says and you'll be fine. I just started using EZ recovery 3 days ago and I've already flashed a recovery and a custom kernel. The EZ recovery is only foe flashing recoveries...don't ever try to flash a custom Kernel through it. You can flash custom kernels through CWM Recovery the same way you flash custom rooms, but you need a recovery that supports kexec which would be CWM 6..which is what you have.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
Click to expand...
Click to collapse
Ok, thanks. Been having problems and I think it's because I've involved Rom Mgr
I would to flash my gs3 to CM10 but my question is can I use ez recovery app and flash it to cmw 6.0.1.0 and then the CM10 rom or I have to choose custom and a select d2vzw_recovery.img to flash it?
Sent from my SCH-I535 using xda premium
GserMx said:
I would to flash my gs3 to CM10 but my question is can I use ez recovery app and flash it to cmw 6.0.1.0 and then the CM10 rom or I have to choose custom and a select d2vzw_recovery.img to flash it?
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I believe EZ recovery allows you to flash a lot of kexec based recoveries, including CMW 6.0.1.0.
I'm curious if using a kexec recovery with CM10 will cause your phone to boot into recovery when you hard reboot, but I'm trying to find out if there's a way to go back to your already flashed CM10 instead of booting the stock ROM.
I have been following the ROM for awhile and tried to flash 1.1 last night. (Now I see 2 is coming so I will wait). My question is I have only flashed beans and aokp. Beans had the aroma install like version 2 of this ROM will have which I simply install from clock work. Do you install 1.1 that way as well or do you flash from Odin? I tried to install from zip using clockwork but it just reboots to stock. Thanks for the help
Sent from my SCH-I535 using xda app-developers app
Install 1.1 from recovery. NOT Odin. Be sure to wipe data beforehand in cwm or twrp.
Sent from my SCH-I535 using xda app-developers app
Sorry I'm noobish...but used clockwork wiping all cache ect...then installed zip from external card. It says installing update then I reboot. It installs faster than normal. On reboot it just seems so stock. Maybe I'm just retarded and it installed fine. Anyway to tell in settings?
Sent from my SCH-I535 using xda app-developers app
I have flashed many 4.3 Roms and can not get any of them to boot. I have followed all install instructions but can't get past gs3 screen. Any ideas?
Sent from my SCH-I535 using xda app-developers app
im having a similar problem to yours..i mean after i do a fresh install+gapps it works..but after i go back to recovery and install my other files it wont go past the gs3 logo no idea why.
Yep frustrating any other ROM is OK just 4.3 not working, sucks.
Sent from my SCH-I535 using xda app-developers app
I've flashed every 4.3 and all booted. Try just flashing ROM first. Let sit a few minutes then flash gapps. I also use the eclipse ROM gapps for all. No issues.
Sent from my SCH-I535 using xda app-developers app
I also have the same problem when I try to reboot on 4.3 Roms. First boot up is fine. But when I go into to recovery it won't boot back up unless I reflash the ROM from the start. If someone tries flashing ROM and gapps separately let us know if it fixes it.
Sent from my SCH-I535 using Tapatalk
Tried eclipse ROM and apps. No different. Initial boot works and ROM runs fine but reboot freezes up on gs3 screen. What is getting scrambled and is there a way to fix this.
Sent from my SCH-I535 using xda app-developers app
I've never had this issue. What I've done/used to flash all 4.3 roms was use the super wipe tool found in the general section(the one that wipes data, system and caches only) and then run it once and flash Rom+ gapps as instructed. I use twrp as well. Also, perhaps it's a stock 4.3 kernel and maybe flash a kernel straight after you flash the rom and gapps. Rom> gapps>kernel . Hope it helps
Sent from my SCH-I535 using Tapatalk
---------- Post added at 08:47 PM ---------- Previous post was at 08:41 PM ----------
http://forum.xda-developers.com/showthread.php?t=2097365
[Mod][Utility] Wiping Tools - Simple and Fast
Sent from my SCH-I535 using Tapatalk
I used ez recovery from the play store and used cwm touch recovery and I no longer have the reboot issues. Even if you're using cwm, I would just download ez recovery and try it.
Sent from my SCH-I535 using Tapatalk
Use ez recovery to flash the ROM or install cwm and then flash through that?
Sent from my SCH-I535 using xda app-developers app
I had a similar problem when I first tried 4.2 but I've found two ways that have always worked for me
Full wipe (I wipe everything 3 times, but I'm sure that's overkill)
Flash rom
Flash gapps
Reboot
If it gets stuck on any screen wipe the cache and dalvik cache
Reboot
The other method I've only used with Dirty Unicorns
Full wipe
Flash rom
Reboot
Once the rom reboots, reboot back into recovery
Flash gapps
Reboot
Wait 10 minutes
You can either reboot again or just use as is
But if nothing is working you can odin back to stock
Then use this tool to root, unlock the bootloader, and flash the custom recovery of your choice http://forum.xda-developers.com/showthread.php?t=2332825 (it even works on a mac)
(This is what I always use to root, unlock the bootloader, and flash recovery whenever I have to flash back to stock)
After I do that I always reboot and use Rom Manager to flash the latest recovery before flashing anything else.
These 2 roms have been 100% stable for me
http://forum.xda-developers.com/showthread.php?t=2484256 (4.3.1)
http://forum.xda-developers.com/showthread.php?t=2469789 (4.3 I've never tried the weeklies just the lastest stable build)
Hope it helps
It seems that most ROMs will boot up fine with the latest TWRP recovery. But there are a few that will only boot up with CWM. So download both recoveries and flash them using ez recovery when one of them isn't working.
So, I usually stick with TWRP 2.6 as my default. The great thing about ez is that it includes cwm in it. First off I'd make sure you're running the latest recovery available. Then if that doesn't work restore your backup, hopefully you made one, and flash cwm and try reflashing the ROM. Assuming you're wiping everything at least 3 times and flashing the correct ROM with the correct gapps, there's no reason why it shouldn't work. And another thing. It's never a good idea to restore data from any app, ever. Trust me, I know.
Sent from my SCH-I535 using Tapatalk
Juice3250 said:
It seems that most ROMs will boot up fine with the latest TWRP recovery. But there are a few that will only boot up with CWM. So download both recoveries and flash them using ez recovery when one of them isn't working.
So, I usually stick with TWRP 2.6 as my default. The great thing about ez is that it includes cwm in it. First off I'd make sure you're running the latest recovery available. Then if that doesn't work restore your backup, hopefully you made one, and flash cwm and try reflashing the ROM. Assuming you're wiping everything at least 3 times and flashing the correct ROM with the correct gapps, there's no reason why it shouldn't work. And another thing. It's never a good idea to restore data from any app, ever. Trust me, I know.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
You do realize that the recoveries built into ez recovery are over a year old. I wouldn't flash those under any circumstances. Only use ez recovery to flash from the custom slot.
Sent from my SCH-I535 using Tapatalk 2
Thanks for correcting me on that one. My bad.
Sent from my SCH-I535 using Tapatalk