Unofficial Cyanogenmod 9.1.0 for LY-F1 (Allwinner A10)
Im not warranty your device, so backup your files before install and please be careful, do with your own risks !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Working :
Audio
Sensors
Multitouch
Camera
Sdcard
Wireless
Ethernet
USB
Soft/hard button
Charger
Not Working :
Zoom Camera
Not Tested :
HDMI
Downloads :
Cyanogenmod9.1 (Build Date 31/08/2012) (md5:168a523f70cba5acb5374362b94d370d)
Cyanogenmod9.1 (Build Date 02/09/2012)
Cyanogenmod9.1 (Build Date 13/01/2013) (md5:b0abd427847dcb1ba378bb26384c2195)
How To Install :
Your android must be a version 4.0 Ice Cream Sandwich (if you still using android 2.3 gingerbread please upgrade your firmware).
Root your device using unlockroot (you can skip this part if your device has root).
Install the CWM Recovery, follow this thread
Download the rom and put at your sdcard.
Goto CWM Recovery, choice Install zip from sdcard and choice .zip rom.
Back, to the home CWM and dont forget wipe data and wipe cache.
Reboot system.
Thanks to :
Cyanogenmod Team
christiantroy
turl
Quarx2k
*Just press thanks if you like my work, or donate if you want
Any chance for MIUI port?
Sent from my Alldro Speed using xda premium
bioan said:
Any chance for MIUI port?
Sent from my Alldro Speed using xda premium
Click to expand...
Click to collapse
to many bugs if i port MIUI from another devices, and MIUI launcher not perfect work for tablet.
flowish said:
to many bugs if i port MIUI from another devices, and MIUI launcher not perfect work for tablet.
Click to expand...
Click to collapse
It has been compiled from sources or ported one?? also Can you please provide the build date...asking these questions because I am on 11062012 build.
By the way many congrats and thanks for picking up three projects for A10..hope some new adventures in future
It's fantastic, thanks man.
Shiv Prajapati said:
It has been compiled from sources or ported one?? also Can you please provide the build date...asking these questions because I am on 11062012 build.
By the way many congrats and thanks for picking up three projects for A10..hope some new adventures in future
Click to expand...
Click to collapse
this is 90% build from cyanogenmod source, and 10% from another A10 developers .. yes i will provide the build date later..
im success build from christiantroy source with a lot of feature ,and fix the wireless issues. uploading later ...
john9 said:
It's fantastic, thanks man.
Click to expand...
Click to collapse
you are welcome
flowish said:
this is 90% build from cyanogenmod source, and 10% from another A10 developers .. yes i will provide the build date later..
im success build from christiantroy source with a lot of feature ,and fix the wireless issues. uploading later ...
you are welcome
Click to expand...
Click to collapse
Hi flowish Any progress on new build??
Shiv Prajapati said:
Hi flowish Any progress on new build??
Click to expand...
Click to collapse
check the link , build date 02/09/2012 im fix the wireless issue
flowish said:
check the link , build date 02/09/2012 im fix the wireless issue
Click to expand...
Click to collapse
Hey I was away from XDA these past days.. will try your builds tommorrow...
One question to ask On 02/09/2012 build the wireless issue is fixed? can you please confirm..
Different wifi chipset driver maybe?
Flowish,
This ROM looks good on my Mach Speed (LY-F1 clone) TRIO stealth PRO but I still have no wifi.
Some research over on this thread discovered maybe the issue. http://forum.xda-developers.com/showthread.php?t=1831257&page=8#72
I have RTL8188CUS chipset on my tablet.There are some others with this same chipset confirmed who also cannot get wifi on CM9 and CM10 Rom's by you, Seby and christiantroy.
1 user, Goes1967 has RTL8192CU in his Trio Pro and has not had a wifi issue with the same ROM's.
Is it possible to make a version of this rom or a compatibility zip with drivers for RTL8188CUS ?
Thanks
kevmodee
Shiv Prajapati said:
Hey I was away from XDA these past days.. will try your builds tommorrow...
One question to ask On 02/09/2012 build the wireless issue is fixed? can you please confirm..
Click to expand...
Click to collapse
yeah fixed the issue, but i found a new bug the tablet doest auto rotate, im waiting cm9 update again
kevmodee said:
Flowish,
This ROM looks good on my Mach Speed (LY-F1 clone) TRIO stealth PRO but I still have no wifi.
Some research over on this thread discovered maybe the issue. http://forum.xda-developers.com/showthread.php?t=1831257&page=8#72
I have RTL8188CUS chipset on my tablet.There are some others with this same chipset confirmed who also cannot get wifi on CM9 and CM10 Rom's by you, Seby and christiantroy.
1 user, Goes1967 has RTL8192CU in his Trio Pro and has not had a wifi issue with the same ROM's.
Is it possible to make a version of this rom or a compatibility zip with drivers for RTL8188CUS ?
Thanks
kevmodee
Click to expand...
Click to collapse
yes it's possible but i need your driver source code
flowish said:
yes it's possible but i need your driver source code
Click to expand...
Click to collapse
I am not exactly sure what you need when you say "driver source code" .
Does that come from the original stock firmware or just what is available at the Realtek site?
Also I found a GB 2.3.4 that has wifi AND sound both working.
http://www.mediafire.com/?gd3necyrq3062pd
Maybe that helps figure out driver source code?
kevmodee said:
I am not exactly sure what you need when you say "driver source code" .
Does that come from the original stock firmware or just what is available at the Realtek site?
Also I found a GB 2.3.4 that has wifi AND sound both working.
http://www.mediafire.com/?gd3necyrq3062pd
Maybe that helps figure out driver source code?
Click to expand...
Click to collapse
yup i need driver source from realtek site, so i can compiling wifi driver for your tablet
GB and ICS driver is not same so it cant work
flowish said:
yup i need driver source from realtek site, so i can compiling wifi driver for your tablet
GB and ICS driver is not same so it cant work
Click to expand...
Click to collapse
We can't get lspci to run but dmesg listed this:
the interesting chip info in my log
<6>[ 54.860000] rtw driver version=v3.3.0_2971.20111128
<6>[ 54.860000] ##########rtw_suspend_lock_init ###########
<6>[ 54.920000] usbcore: registered new interface driver rtl8192cu
<6>[ 54.920000] register rtw_netdev_ops to netdev_ops
<6>[ 54.950000] CHIP TYPE: RTL8188C_8192C
here is the same entry in Orionoya's log and has same issue
[ 193.690000] rtw driver version=v3.3.0_2971.20111128
[ 193.700000] ##########rtw_suspend_lock_init ###########
[ 193.710000] usbcore: registered new interface driver rtl8192cu
[ 193.880000] usb 4-1: new high speed USB device using sw-ehci and address 2
[ 194.030000] register rtw_netdev_ops to netdev_ops
[ 194.030000] CHIP TYPE: RTL8188C_8192C
We opened our tablets and found this on the actual chip inside
Realtek RTL8188CUS , C3H37H1 ,CC14,TAIWAN
And so I think the drivers from realtek are listed here
RTL8188CUS - Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8 Android 1.6~2.3 and 4.0
http://www.realtek.com.tw/downloads...ownTypeID=3&GetDown=false&Downloads=true#2742
Thanks for continuing to look at this for us
kevmodee said:
We can't get lspci to run but dmesg listed this:
the interesting chip info in my log
<6>[ 54.860000] rtw driver version=v3.3.0_2971.20111128
<6>[ 54.860000] ##########rtw_suspend_lock_init ###########
<6>[ 54.920000] usbcore: registered new interface driver rtl8192cu
<6>[ 54.920000] register rtw_netdev_ops to netdev_ops
<6>[ 54.950000] CHIP TYPE: RTL8188C_8192C
here is the same entry in Orionoya's log and has same issue
[ 193.690000] rtw driver version=v3.3.0_2971.20111128
[ 193.700000] ##########rtw_suspend_lock_init ###########
[ 193.710000] usbcore: registered new interface driver rtl8192cu
[ 193.880000] usb 4-1: new high speed USB device using sw-ehci and address 2
[ 194.030000] register rtw_netdev_ops to netdev_ops
[ 194.030000] CHIP TYPE: RTL8188C_8192C
We opened our tablets and found this on the actual chip inside
Realtek RTL8188CUS , C3H37H1 ,CC14,TAIWAN
And so I think the drivers from realtek are listed here
RTL8188CUS - Linux Kernel 2.6.18~2.6.38 and Kernel 3.0.8 Android 1.6~2.3 and 4.0
http://www.realtek.com.tw/downloads...ownTypeID=3&GetDown=false&Downloads=true#2742
Thanks for continuing to look at this for us
Click to expand...
Click to collapse
ok got the realtek information, but i still working for mobile now maybe a few week im build again because cm9 not update now
Hey Flowish,
Any chance you will have time for an update for 8188CUS?
Thanks
Kevmodee
Sent from my MID using xda app-developers app
kevmodee said:
Hey Flowish,
Any chance you will have time for an update for 8188CUS?
Thanks
Kevmodee
Sent from my MID using xda app-developers app
Click to expand...
Click to collapse
i dont have allwinner device now (because my father borrow my tablet), so last update just cwm recovery 6.0.1.2
I've just tried this rom (the September 2 version) on my tablet, and everything seems to work well except the capacitive buttons. If I tap the "back" button while any text field is open, it types the number "1". (If I tap the back button on the home screen, nothing happens.) Similarly, the "menu" button types a number "2". Any ideas how to fix that? I'm not exactly sure what model tablet I have, but I've been using the stock LY-F1 firmware on it without any problems.
Edit: I've just noticed that the home button is behaving like a back button. I can use it as a back button for now, but it would be useful to have a functioning home button and menu button too.
Hello flowish, did you have the chance to look at the missing WiFi issue for Trio Stealth Pro?
Thank you!
update build 13/jan/2013 ,enjoy ..
Related
SO HERE WE GO MY GT-6210 FRIENDS.
I sold my tab because I got an iPad 2 for work and used the money to get a Galaxy Nexus I will probably keep building this ROM once the kernel is worked out and everything is working. Most likely Build AOKP
Just like the GT-6200 Developer Release this is a very basic preview build of CM9. That being said, if you choose to flash this build, YOU DO SO AT YOUR OWN RISK.
I am not a Dev or claim to be one, I just spent a lot of time the last few monthes learning how to build from AOSP and CM9, and figured I'd share my success with the community. I am not resposible for any one bricking their devices by not reading all the information that is all hear on XDA.
Please atleast read through this if you are a n00b: http://forum.xda-developers.com/showthread.php?t=1452716
And this if you are not Rooted yet: http://forum.xda-developers.com/showthread.php?t=1379532
ONCE AGAIN
FLASH AT YOUR OWN RISK
All credit and thanks goes out to:
-Google
-The whole Cyanogen team
-aorth (for getting this moving on out TABs)
-locerra (for his quick work on the p6210 device tree & framework tweaks)
-garyd9 (for all his work on the p6210 and this forum)
-Anyone else that made this possible THANK YOU
I will try to maintain this thread as much as I can, but I have a full time job, school, family and a life
I will at the least be folowing any changes in the source code or on github and post any builds I compile.
I WILL NOT BE:
-Responding to any questions that can be found by simply searching
-Spending a lot of time helping people to get this up and running
This is what I did to get it up and running:
-Put the ZIP file on the TABs internal sd partition (NOT THE SD CARD YOU PUT IN TO THE TAB)
-Reboot into Recovery
-Wipe data/factory reset
-Wipe cache partition
-wipe Dalvik Cache
-format /cache
-format /system
-format /data
-Install update-cm-9.0.0-RC0-p6210-UNOFFICIAL-signed.zip
-Reboot and enjoy!!! Not much is working though.
What's working:
Accelerometer
Hardware-accelerated launcher
Touch input
Vibration
Physical buttons (volume + power)
Audio
What's not working:
Bluetooth
Wifi
Camera
GPS
Hardware-accelerated video
Ambient light sensor(working for the most part in new build 2)
Here is the link: http://www.mediafire.com/?jrcehwgewyxi6kb
Any Mirrors for downloads are welcome, not sure how for the free mediafire account will go.
New Build with working Audio
Thanks to locerra!!!
DP2: http://goo.gl/6mXTQ
md5: 79bdbb1e44d8e4421221525c00947688
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved
Sent from my GT-P6210 using xda premium
Hey! This is awesome, i'm glad you were able to get this running. I was gonna try to get it running, but I ran outta space on my ubuntu partition lol.
I was wondering if we could get wifi working by porting this..
https://github.com/psyke83/AR6kSDK.3.1
fyi, locerra = ohanar
locerra said:
fyi, locerra = ohanar
Click to expand...
Click to collapse
Good to know lolz
Sent from my GT-P6210 using xda premium
Woooo yes bring it on! Great to see people chipping in and getting this off the ground! Really looking forward to seeing this finished.
Would be abysmally funny if they finish before Samsung gets their ICS out even though that circumstance is not likely to happen.
bdds13 said:
Hey! This is awesome, i'm glad you were able to get this running. I was gonna try to get it running, but I ran outta space on my ubuntu partition lol.
I was wondering if we could get wifi working by porting this..
https://github.com/psyke83/AR6kSDK.3.1
Click to expand...
Click to collapse
Not sure if I could get this worked into a build. Do you have more info on what and where this code comes from?
Sent from my GT-P6210 using xda premium
This is great and really inspiring. I really wish I knew where to begin to help out on moving this forward. Thanks for all the work guys
kmmxracer said:
Not sure if I could get this worked into a build. Do you have more info on what and where this code comes from?
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
Yeah, I got it from this old post here on the general forum.
http://forum.xda-developers.com/showpost.php?p=23262686&postcount=18
It's supposed to be from one of sony's e-book reader devices.
Good to see you up and running. Congrats! Now you guys get to work on wifi and I'll start working on telephony .
kmmxracer said:
Not sure if I could get this worked into a build. Do you have more info on what and where this code comes from?
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
i found something similar quite some time ago.
https://github.com/DerArtem/AR6kSDK.3.1
it's from derartem, he and nopy is working on ICS for Folio 100 too currently.
http://forum.xda-developers.com/showthread.php?t=1470823
it is the same thing with some modification from DerArtem.
Progress on wireless... sorta.
P6200/P6210 use an Atheros 6003 wireless chip (also for bluetooth?). The open-source atk6kl driver from compat-wireless supports this chip. I found some interesting information about building this module on the HP Touchpad forum over at RootzWiki. I can compile the module, but I just can't load it.
Here's how:
1. Compile kernel:
Code:
cd ~/src/git/kernel_samsung_c210
LOCALVERSION="" ARCH=arm CROSS_COMPILE="/home/aorth/src/android-ndk-r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-" make -j8 zImage
2. Compile compat-wireless
Code:
cd ~/src/compat-wireless-3.3-2-n
./scripts/driver-select ath6kl
ARCH=arm CROSS_COMPILE="/home/aorth/src/android-ndk-r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-" KLIB=~/src/git/kernel_samsung_c210 KLIB_BUILD=~/src/git/kernel_samsung_c210 make -j4
But attempting to insert the resulting modules spits out errors like:
Code:
# insmod compat.ko
insmod: can't insert 'compat.ko': invalid module format
# dmesg | tail -n3
<4>[ 365.244149] load_module: umod=4015c000, len=1311485, uargs=01a1f008
<3>[ 365.266659] compat: unknown relocation: 96
<6>[ 382.490328] BAT : soc(100), vcell(4152mV), curr(0mA), temp(26.7), chg(0), full(1), rechg(0), cable(1)
@ohanar... help!
Nice start!
aorth said:
P6200/P6210 use an Atheros 6003 wireless chip (also for bluetooth?). The open-source atk6kl driver from compat-wireless supports this chip. I found some interesting information about building this module on the HP Touchpad forum over at RootzWiki. I can compile the module, but I just can't load it.
Here's how:
1. Compile kernel:
Code:
cd ~/src/git/kernel_samsung_c210
LOCALVERSION="" ARCH=arm CROSS_COMPILE="/home/aorth/src/android-ndk-r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-" make -j8 zImage
2. Compile compat-wireless
Code:
cd ~/src/compat-wireless-3.3-2-n
./scripts/driver-select ath6kl
ARCH=arm CROSS_COMPILE="/home/aorth/src/android-ndk-r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-" KLIB=~/src/git/kernel_samsung_c210 KLIB_BUILD=~/src/git/kernel_samsung_c210 make -j4
But attempting to insert the resulting modules spits out errors like:
Code:
# insmod compat.ko
insmod: can't insert 'compat.ko': invalid module format
# dmesg | tail -n3
<4>[ 365.244149] load_module: umod=4015c000, len=1311485, uargs=01a1f008
<3>[ 365.266659] compat: unknown relocation: 96
<6>[ 382.490328] BAT : soc(100), vcell(4152mV), curr(0mA), temp(26.7), chg(0), full(1), rechg(0), cable(1)
@ohanar... help!
Click to expand...
Click to collapse
I need to learn to compile a kernel. Where did you get the kernel from and where did you get the toolchain/cross compiler from? Is it the one inside the cyanogen repo or codesourcery or what?
Sorry if the dumb questions, but I'm just getting started/interested in kernels
kmmxracer said:
I need to learn to compile a kernel. Where did you get the kernel from and where did you get the toolchain/cross compiler from? Is it the one inside the cyanogen repo or codesourcery or what?
Click to expand...
Click to collapse
The kernel we are currently using is the one at https://github.com/ohanar/kernel_samsung_c210, however, in the long run we should move over to https://github.com/teamhacksung/android_kernel_samsung_smdk4210, although this is currently broken for our devices (so we need to fix it ).
I am using the latest ndk toolchain that comes with in cm repo.
---------- Post added at 02:35 AM ---------- Previous post was at 02:33 AM ----------
aorth said:
@ohanar... help!
Click to expand...
Click to collapse
Haven't really looked into this too much. I'm more interested in getting the smdk4210 kernel working (and that already includes the atheros drivers).
Thanks, I just found some good reading on compiling kernels. I allways find what I need right after asking in a thread
I'll start with the teamhacksung git. Thanks!!!!
locerra said:
Haven't really looked into this too much. I'm more interested in getting the smdk4210 kernel working (and that already includes the atheros drivers).
Click to expand...
Click to collapse
Yeah, you're right. It's likely the same ath6kl driver, though, as compat-wireless is where the mainline kernel gets linux-wireless-next (and smdk4210 kernel is based on mainline, or at least will be soon... it might be based on origen board kernel right now, see OpenGalaxy).
btw, this module loading issue isn't strictly a wireless issue. I can't load j4fs or scsi_wait_scan either. I swear I loaded these once before, recently...
btw, this module loading issue isn't strictly a wireless issue. I can't load j4fs or scsi_wait_scan either. I swear I loaded these once before, recently...
Click to expand...
Click to collapse
Yeah, I'm having that issue too...
locerra said:
Yeah, I'm having that issue too...
Click to expand...
Click to collapse
Question... when you were still using kernels compiled with Samsung's LOCALVERSION string, did you ever get the ar6000.ko to load?
Please Donate your contribution in the below link...
http://pledgie.com/campaigns/17567
As many of you know Epsylon3 from CM Team is ready to help us in porting CM 7/9 but we need to provide then Galaxy R.
Epsylon3 is buying this device just to help us on my request, he already owns 3 devices (2 defys and 1 atrix) that is why we need to provide him Galaxy R.
****[UPDATE]****
Friends,
Im very proud to say that
WE REACHED OUR GOAL!!!
I want to thank all of you for this achievement. Finally we did it and Now Epsylon is having what is needed to start the work.
Thank you very very much once again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Found this on French online, http://www.ldlc.com/fiche/PB00124931.html
http://www.saholic.com/mobile-phones/samsung-galaxy-r-i9103-1002157
cant trust the website
Sent from my GT-I9103 using XDA
vipul12389mehta said:
http://www.saholic.com/mobile-phones/samsung-galaxy-r-i9103-1002157
cant trust the website
Sent from my GT-I9103 using XDA
Click to expand...
Click to collapse
No the Website is well Trusted!! So No Problem with that
http://www.ebay.com/sch/Cell-Phones...ocalstpos=&_nkw=samsung+i9103+galaxy+r&_clu=2
I think It has E-BAY BUYER PROTECTION, also from Paypal i think
donate
voted for 10$, but can donate 50-100$ if needed. cant wait for ICS on R
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Here is the full story
I'm also in Atrix dev team which is a similar phone and made some recovery and bootmenu work on it...
Working on this phone will help the 2 devices, even if Atrix one is already almost fully working (camcorder is still buggy)
Epsylon3 said:
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Here is the full story
I'm also in Atrix dev team which is a similar phone and made some recovery and bootmenu work on it...
Working on this phone will help the 2 devices, even if Atrix one is already almost fully working (camcorder is still buggy)
Click to expand...
Click to collapse
Hi Epsylon3 welcome to Galaxy R,
i am very happy to see you on our forum, our Galaxy R users will be very much thank full to you..
Epsylon3 said:
I confirm i'm familiar with tegra kernel and also i can pay a part of it by myself
I got the defy ICS port almost working only a few days after sources release, and last official moto rom was a froyo 2.2.2 ...
Click to expand...
Click to collapse
Hi buddy,
Thanks for showing interest in developing CM 9 for our device.
If possible elaborate & give us a rough idea on how you'll go about the development of CM 9 for SGR. It could help in keeping the expectations of people donating here close to reality. But ofcourse I am not asking for exact ETAs just some rough structure on how will the development go on and if other CM devs (eg LG O2X devs) will be involved in developing CM 9 for our device ?
Moreover 'supercurio' is also from France, it would be nice if you could cooperate with him and help in unlocking the full potential of the quality sound chip we have on R. He has already made progress in developing a Voodoo MOD for our device & if you could cooperate with him we can get official support & updates from supercurio for our device. Would it be possible ?
----------------------
I just have a big noob question, if you don't mind kindly clarify.
We don't have an ICS kernel as the ICS update for R isn't out yet. As per what a fellow member said (who was trying to develop CM 7 / 9 for our device) CM 9 requires kernel 3.0, so does that mean you'll build the kernel 3.0 for our Galaxy R from scratch ?
------------------------
I hope that I'm not asking too much.
BTW I have studied French at school level and found it to be pretty suave most of the times & sometimes a complex language. Another reason for which I loved it was because it was high scoring subject.
Cheers !
'cooleagle' said:
Hi buddy,
I just have a big noob question, if you don't mind kindly clarify.
We don't have an ICS kernel as the ICS update for R isn't out yet. As per what a fellow member said (who was trying to develop CM 7 / 9 for our device) CM 9 requires kernel 3.0, so does that mean you'll build the kernel 3.0 for our Galaxy R from scratch ?
------------------------
Click to expand...
Click to collapse
cooleagle, I was going through Epsylon3's work on bringing ICS to Defy. From the demo videos, it seems to run CM9 Nightly on 2.6.36 Kernel. I hope we may not need kernel v3 to run ICS. Again, Pls correct me if i'm wrong.
emanoj.i9103 said:
cooleagle, I was going through Epsylon3's work on bringing ICS to Defy. From the demo videos, it seems to run CM9 Nightly on 2.6.36 Kernel. I hope we may not need kernel v3 to run ICS. Again, Pls correct me if i'm wrong.
Click to expand...
Click to collapse
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
mj.vikram said:
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
Click to expand...
Click to collapse
I am just trying to gather info by discussions:
In that case do we lose any features/functions if we keep on using the GB kernel in the CM9 build ?
And what happens when ICS is released for our device, will the dev have to start from scratch once again to get CM 9 with ICS kernel running or will it be an easier process ?
mj.vikram said:
I think you are correct because in his thread its clearly mentioned that CM9 with Froyo kernel....
Thread Heading: [ICS] CM9 Android 4.0.4 for the Defy (Froyo kernel)
Click to expand...
Click to collapse
The Froyo kernel is for certain Defys with a different camera (SoC version) and the Gingerbread Kernel is for the other type of Defys (Bayer module) and Defy+
This was sent from a Galaxy Ace. Problem?
Я за ics : Круто:
Android is not locked to a specific kernel version... but proprietary libs (and nvidia ones are a good example) are made for the kernel shipped with them.
Defy froyo (and gb) kernels are 2.6.32 but with some advanced moto features like the usb gadgets, we had the luck to have almost all the stuff required for ics.
One missing GL_OES api is making hwui port very hard. But that is not exactly a missing kernel feature.
Most GPU libs are bought by vendors and are proprietary sets of prebuilt objects (.lib) and headers, for the omap they come from the SGX DDK
So to answer on how i want to start... I think we need first a CM 7.2 port, to reduce and test before the possible problems.
Making a CM rom is not a zip kitchen... It require sources for almost all, a few ones can be grabbed first from existing gb roms, some will always be proprietary (nvidia ones).
Kernel work should only be done if there is no other ways... Since we are locked to the nvidia layer, changing the kernel generation can break all...
I dont know yet if there is available source code published, checking...
EDIT: i got kernel samsung sources of 2.6.36.3 kernel (Feb 2012), and a few other things from samsung
could somebody confirm me the wifi/bt chip is a bcm dhd ? and if fm radio is supported by the phone ?
EDIT2: we get interresting stuff when "diffing" kernel updates : https://gist.github.com/2890552
ps: github epsylon3 is my secondary account for tegra stuff
@Epsylon3
Thanks for responding. Do tell us if it would be possible for you to cooperate with 'supercurio' for Voodoo sound.
This handset does have FM Radio support but I have no info about the broadcom chip will check and revert.
Edit: There are some internal chipset diagrams of Galaxy R here on xda itself.
Do you remember the chipset numbers of some common bcm chips which are used in mobiles ? If you do then checkout the diagrams below it could help.
Kindly check your PM
Cheers !
@Epsylon3
We have a great gingerbread kernel made from Samsung's sources by ardatdat. Most people here I think use this kernel as it solves some problems of Samsung's kernel, like inability to count 3G traffic.
You can find it here: https://github.com/ardatdat/GalaxyR-i9103-Kernel
The device does have a FM radio.
I don't have an easy way to detect the bt/wifi module but my device shows dhd module as loaded.
Code:
$ lsmod
dhd 236992 0 - Live 0xbf015000
Si4709_driver 36073 0 - Live 0xbf006000
bthid 3547 0 - Live 0xbf000000
mrsaccess said:
@Epsylon3
We have a great gingerbread kernel made from Samsung's sources by ardatdat. Most people here I think use this kernel as it solves some problems of Samsung's kernel, like inability to count 3G traffic.
You can find it here: https://github.com/ardatdat/GalaxyR-i9103-Kernel
The device does have a FM radio.
I don't have an easy way to detect the bt/wifi module but my device shows dhd module as loaded.
Code:
$ lsmod
dhd 236992 0 - Live 0xbf015000
Si4709_driver 36073 0 - Live 0xbf006000
bthid 3547 0 - Live 0xbf000000
Click to expand...
Click to collapse
i mean, does somebody has seen it working on stock roms ?
because the Atrix has the chip bcm4329 FBGA(WLAN/BT+FM+EDR) for it but its not linked in hardware :/
for the wifi/bt... i ve atrix schematics too... i will check the chip size
thanks for the link... i will try to link to my test repo : https://github.com/epsylon3/
yours is a bcm4330 : http://www.logictoyz.com/cell-phone...rated-bluetooth-4-0hs-and-fm-transceiver.html
6x6mm
Yes, the FM radio is officially a feature of the phone.
I have only used it with Samsung's app though. Works great with ardatdat's kernel too.
EDIT:
I am not sure if we have bcm4330 because our bluetooth is v3.0 I think.
ive seen that in kernel sources, bcm4330 folder is part of samsung changes
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Seeing everyone has demanded it (well not demanded, but asked politely), it's time for me to bring my legendary kernel to the Galaxy SL.
Features
Busybox
ADB root
LZMA compressed
Credits
dhiru1602 for his work to date with the Latona
Source Code
https://github.com/hillbeast/Kyorakernel-SL
Changelog
Coming soon
Download Links
Coming soon
Guides
Coming soon
Full Feature List
Coming soon
This mean u are going to backport some 3.0 features or u are just going to compile a normal 2.6 kernel for i9003?
OT: Again and again: thanks hillbeast in the name of almost every xda-developers
simbita said:
Works it with CM9?
Click to expand...
Click to collapse
Not yet. I'm just getting it to work before I start supporting CM9 and all that.
Wucaiting said:
sorry
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I'm really a terrible teacher. If people want to learn kernel development, I'm not the best teacher. I lack the effort, can't explain stuff right, and I'm too busy in my personal life to dedicate myself to teaching people. Sorry.
luiseteyo said:
This mean u are going to backport some 3.0 features or u are just going to compile a normal 2.6 kernel for i9003?
OT: Again and again: thanks hillbeast in the name of almost every xda-developers
Click to expand...
Click to collapse
Both. It's going to be a normal 2.6 kernel, but it's going to get tuned up over time. It's usable for people right now, but I'd call this a stock kernel in it's current state.
If anyone wants to know what I'm working on, I'm working on MTD for this kernel.
This is the current status:
Code:
[ 4.945831] Muxed OneNAND 512MB 1.8V 16-bit (0x50)
[ 4.950927] OneNAND version = 0x0242
[ 4.955993] Scanning device for bad blocks
[ 4.960266] onenand_bbt_read_oob: from = 0x00000000, len = 2
[ 4.966247] onenand_bbt_wait: read timeout! ctrl=0x0400 intr=0x8000
[ 4.972808] onenand_scan_bbt: Can't scan flash and build the RAM-based BBT
[ 4.980255] OneNAND driver initializing
That's it trying to start the OneNAND, and I'm pretty sure that's right. It is a 512MB OneNAND and I haven't had to tell it that so it figured it out by itself. I just need to figure out why it's not able to read it. Apart from that, this is good progress considering I only just started.
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
bscraze said:
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
The WiFi issues are caused by modmagic. The WiFi drivers are supplied in /system/lib and are paired to a kernel. It would be a matter of taking a paired dhd.ko and putting it in the kernel itself rather than in the /system.
bscraze said:
If you can get it to work properly on the value packs that would be great. The older universal kernels have bugs such as wifi errors and random reboots, even though I still face wifi errors on the stock kernel(because of root? I have no idea)
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Ya all the kernel in present situation are based on xxkpq sources having universal feature. But on value packs like XXLF2, DDLF2 etc these universal kernel dont work properly & have errors like above said.
reserved. after this hoping for kyorarom if possible.
hillbeast said:
The WiFi issues are caused by modmagic. The WiFi drivers are supplied in /system/lib and are paired to a kernel. It would be a matter of taking a paired dhd.ko and putting it in the kernel itself rather than in the /system.
Click to expand...
Click to collapse
speaking of wifi issues, may/can you make it work on posidon rom? because other GB kernels seems to have alot of issues with wifi and other stuff.... (xxkpq)
Wahaha123 said:
speaking of wifi issues, may/can you make it work on posidon rom? because other GB kernels seems to have alot of issues with wifi and other stuff.... (xxkpq)
Click to expand...
Click to collapse
I can try. I want to get MTD working first. I think I just have an address wrong somewhere. I need to find where these are set for OMAP. I know where they are in Samsung Hummingbird/S5P/Exynos, but not OMAP.
ggclanlord said:
Subscribed.
Click to expand...
Click to collapse
u didnt hav to say that lol
@hillbeast- thanks for ur contribution here are a little of my experiences with this phone.. oc more than 1.2 ghz causes problems for camera n video recording and its not advisable .. even underclocking leads to sod at times although not always(based on uk kernels) ... and since u specialize in kernels.. c if u can get gpu oc to work.. most said it isnt possible n it wasnt working ... all the best sir m not demanding anything
cukierkas said:
Willing the best!
By what points your kernel will be better than current ones? Just asking
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
For that you'll have to wait and watch.
There were requests from senior members in other thread for features that weren't available on current kernels. I guess that's what prompted Hillbeast to create this kernel for this device. Also, I guess in developing this kernel, he might find out what exactly is going wrong with 3.x and we might get both working.
o0Arthas0o said:
I just have a piece of advice.How about include exFAT support in your kernel.It can improve the speed of SDCARD
Click to expand...
Click to collapse
I can try, but the problem there is the same as adding NTFS support to the SD card. I did it in G3MOD and it worked, but Android itself couldn't read the SD card because vold didn't know how to handle it.
BassBlaster said:
I don't think mtd supports exfat
Click to expand...
Click to collapse
MTD is for the OneNAND. The memory card uses standard Linux MMC drivers.
Thread cleaned extensively, let's keep on topic please, and avoid the little, "thanks", "subscribed", and eta posts.
Thanks
hi
how to flash it? and where is the tar file? i need stock kernel please. my menu and back button sensor not working.. TIA
Before Hillbeast and others got mad at you please try cf-root heres the link http://forum.xda-developers.com/showthread.php?t=1351056 download bagaria.tar. Questions should not be posted in dev. area.
francisac3 said:
how to flash it? and where is the tar file? i need stock kernel please. my menu and back button sensor not working.. TIA
Click to expand...
Click to collapse
Download Ubuntu 64-bit and install it on your computer
Download the build tools and git-core
Clone my GIT repository linked on the first page
Compile the kernel
Flash the output TAR
There is no download link. I don't see the kernel as being ready to be released to public.
As a usual disclaimer : THIS CAN KILL YOUR PHONE , MAKE YOUR CAT BLIND OR DISINTEGRATE THE TIME CONTINUUM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AOKP
DOWNLOAD
CHANGELOG
2013/02/22 : Device tree cleaned, thanks to h1n1 team - sim unlock bug cleared, compass working, waiting for your feedbacks
2013/02/11 : Addition of a Touchscreen legacy setting in device tree (idea of jinxxed), feedbacks needed !
2013/02/07 : New build with last kernel sources, add some tethering option, feedback appreciated
2013/02/06 : first release
YOUR ATTENTION
You will not send Private Message for noobish questions
You will READ before asking
Feedbacks (positive or negative) must include the version you are using
NEVER ASK FOR ETA (especially by PM)
Donations are accepted and would be used to buy a dedicated phone for dev
STATUS
[+]
Boots
GSM/3G
Wifi
bluetooth transfer
photo/camera
HW encoding (decoding only software)
charging
USB Mount (desinstall all alcatel drivers and one touch craps)
FM Radio (with spirit free app)
battery stats
bluetooth audio
compass/magnetometer NEW!
[-]
amount of data used is not available in the settings
HW decoding
bluetooth voice (sound goes out the headset but is awful)
tethering (only open, not WPA)
hdmi (image goes out but is distorded)
SOURCES
http://forum.xda-developers.com/showthread.php?t=1731574
https://github.com/ius/android_device_alcatel_cocktail
https://github.com/ius/alcatel_cocktail_kernel
https://code.google.com/p/ot995-cyanogenmod/wiki/Installation
Click to expand...
Click to collapse
THANKS TO
Cyanogenmod Team
Paranoid team
AOKP team
iuss
all testers
Click to expand...
Click to collapse
for your information, i have put the adreno libs which are the msot stable atm, but HW decoding is not working.
Confirmed AOKP mass storage works with Windows 7 and 8 x64.
Sent from my OT-995 using xda premium
tumaini418 said:
Confirmed AOKP mass storage works with Windows 7 and 8 x64.
Sent from my OT-995 using xda premium
Click to expand...
Click to collapse
Flash 3 times and still not working, my windows 7 x64 never had OTU installed S50 version here
maybe installing OTU then uninstalling it will add some kind of drivers on windows, i'll try that later
gaelos said:
Flash 3 times and still not working, my windows 7 x64 never had OTU installed S50 version here
maybe installing OTU then uninstalling it will add some kind of drivers on windows, i'll try that later
Click to expand...
Click to collapse
Same version here. Don't know what to tell ya, except maybe your cable is on the fritz. I just connected to my personal/work laptop and my DAW laptop. Both work and had no problem recognizing my phone. But I knew that about win 8 from last night when I transferred mp3 files.
Sent from my OT-995 using xda premium
tumaini418 said:
Same version here. Don't know what to tell ya, except maybe your cable is on the fritz. I just connected to my personal/work laptop and my DAW laptop. Both work and had no problem recognizing my phone. But I knew that about win 8 from last night when I transferred mp3 files.
Sent from my OT-995 using xda premium
Click to expand...
Click to collapse
Problem solved
installed OTU 2.5.8
uninstalled OTU 2.5.8
reboot windows
mass storage detected
I have flashed gapps 4.1.2 but nothing available, i can't even add a google account. Help will be appreciate.
gaelos said:
Problem solved
installed OTU 2.5.8
uninstalled OTU 2.5.8
reboot windows
mass storage detected
I have flashed gapps 4.1.2 but nothing available, i can't even add a google account. Help will be appreciate.
Click to expand...
Click to collapse
Give me a few and I'll pm ya a link for the gapps minimal I used. Unless someone beats me to it. Glad you sorted it out.
Sent from my OT-995 using xda premium
how's battery life?
From what I've seen so far today, not as good as PAC.
Sent from my OT-995 using xda premium
tumaini418 said:
Give me a few and I'll pm ya a link for the gapps minimal I used. Unless someone beats me to it. Glad you sorted it out.
Sent from my OT-995 using xda premium
Click to expand...
Click to collapse
i tried a minimal i found for PAC but not working either ooops i received a pm
ok i use 5.* recovery maybe it was just that.
which recovery are you using ?
BENETNATH said:
which recovery are you using ?
Click to expand...
Click to collapse
was using 5.5. and now i use 6.0. with minimal gapps
thanks it looks normal now
testing tether in a few minutes
new build released, with a kernel compiled from last alcatel sources, and i've added some tethering options, feedback appreciated.
BENETNATH said:
new build released, with a kernel compiled from last alcatel sources, and i've added some tethering options, feedback appreciated.
Click to expand...
Click to collapse
Can I just flash over this one? I guess not now that I think about it. Dam, just got this one fully setup. Your cool Ben, but you're killing me man. lol
Sent from my OT-995 using xda premium
give a try, i did without trouble
wooaaa i'm charging the phone atm, and i'll give it a try...
BENETNATH said:
give a try, i did without trouble
Click to expand...
Click to collapse
tether was not working on the old one. No connection possible open or wpa or wpa2 windows see the wifi but refuse to connect.
damn i finished to my setup flashing over without wipe ? sound cool
testing tether on new one later
anyone speaking french here ? i have plenty of time
USB Mount (desinstall all alcatel drivers and one touch craps)
you must say
USB Mount (install then unsinstall alcatel drivers with "one touch upgrade 2.5.8")
after installing maps for navigation voice search give me a FC
had to install voice search from market, maybe because i choose minimum install for gapps ?
if you are speaking french, then you can translate the ROM control strings, to get a proper french release
just translate these lines : https://github.com/AOKP/packages_apps_ROMControl/blob/jb-mr1/res/values/strings.xml
and send me the result ..
tumaini418 said:
Give me a few and I'll pm ya a link for the gapps minimal I used. Unless someone beats me to it. Glad you sorted it out.
Sent from my OT-995 using xda premium
Click to expand...
Click to collapse
please, give me link to the minimal gapps u used
I have the one given in the PAC thread.
aleksandar.1 said:
please, give me link to the minimal gapps u used
I have the one given in the PAC thread.
Click to expand...
Click to collapse
seems to be the same as PAC
Tether not working on the new release same problem when connecting
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Zeus Toolkit was first put into development in january of 2014 for the use with the Allwinner A13 tablets. Since its birth the tool has progressed rapidly with new functions which make repairing/modifying a breeze compared to doing it all from a command prompt and coding scripts etc..
The tool can automate tasks which some might find hard to do manually for instance editing the script.bin
NOTE: Could ALL Q&A related posts please be posted in the new Q&A Thread HERE any Q&A related posts will not get a response from this thread. Thank You.
SCREENSHOTS
SUPPORTED DEVICES
ALLWINNER A13:
Analyze Device
CPU Info
CPU Usage
Software Version
Battery Stats
Build Description
Partition Info
LSMOD
Firmware Backup
Open Livesuit
Bootanimation Changer
Boot Logo/Splash Changer
Build.prop Editor
Scrript Tool/Editor
CWM Recovery Installer
DragonFace
LENOVO TAB 2 A8-50:
Analyze Device
CPU Info
CPU Usage
Software Version
Battery Stats
Build Description
Partition Info
Build.prop Editor
Root Device
VERSION CHANGELOGS
**Version 6.0**
Fixed all known bugs for the allwinner a13 functions
Added device lonovo tab 2 a8-50
Updated some gui graphics
**Version 5.0**
Cleaned Up Code
Fixed all bugs brought to my attention!
Redesigned GUI Completely (due to the future addition of other devices )
Removed Root Function (all allwinner tabs are already rooted when bought)
Removed Zeus Rom (no longer maintained)
Removed Automatic Updater (due to some security issues on my side should be back in next version)
Temporarily Removed Windows Drivers (i am fixing it up and will be back in the next version)
** Version 4.5 **
Added Root Function
Added The first version of the Zeus ROM JB 4.2.2 (for nearly all allwinner a13 tablets)
Fixed som GUI Elements
** Version 4.4 **
Added Rooting function
Added/Changed some GUI details
Fixed Bug installer not creating shortcuts on desktop/start menu
** Version 4.3 **
Added some GUI changes eg, cursor changes etc..
Added Screenshift Fix Function
Added Inverted TS Axis Fix
** Version 4.2 **
Added Automatic Updater
DOWNLOAD
https://mega.nz/#!I8dTySKC!fy3UCVYZXpDP8VGf8WAPXtAVhC7VM8BfELvMuchF-2s
good to see development progress for A13!
bdw is the rom stable and battery friendly??
Sent from my Nexus 7 using XDA Premium 4 mobile app
tjkingg said:
good to see development progress for A13!
bdw is the rom stable and battery friendly??
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hi yes currently the rom is stable and is as fast as it can be at the moment.. and it is battery freindly as can be expected for the a13.
thanks
Hi
I just trying your ROM on my Prestigio pmp3670b (red)...but I have problem with touchscreen modules. I was tried modules from other ROMs but one was working.
Can I use modules from official prestigio FW? how? Or do you have any solution for me?
Thanks for help
Hey guys,
I can't seem to get this tool working. Stumped at the first hurdle. I click "Analyze device" and nothing ever happens. None of the other device based commands seem to work either.
I know the device drivers are all working correctly as I can use the Uberizer tool to do ROM dumps and adb lsmod commands.
Any ideas? Maybe I am not waiting long enough or some other problem? I just want know if I have the right device and modules to run a custom ROM.
Cheers
Calorian said:
Hey guys,
I can't seem to get this tool working. Stumped at the first hurdle. I click "Analyze device" and nothing ever happens. None of the other device based commands seem to work either.
I know the device drivers are all working correctly as I can use the Uberizer tool to do ROM dumps and adb lsmod commands.
Any ideas? Maybe I am not waiting long enough or some other problem? I just want know if I have the right device and modules to run a custom ROM.
Cheers
Click to expand...
Click to collapse
Mmm. That's odd your the first person with this problem or at least the first to bring it to my attention.. The tool uses adb commands in the code to get your device name and to confirm the device is connected using adb...
I have a few questions...
1. What OS are you using on your computer?
2. Are you running the tool as administrator?
3. Do you have java/adb tools installed and up to date?
4. Have you tried using a different cable and/or different USB port? (This normally works to solve nearly all connection issues)
Hey,
I'm running Windows 7 64 bit, all drivers appear to be up to date and running Java v7
I tried a second cable and running as administrator still all to no avail.
Cheers
Sent from my I9300 (ArchiDroids 4.4)
Calorian said:
Hey,
I'm running Windows 7 64 bit, all drivers appear to be up to date and running Java v7
I tried a second cable and running as administrator still all to no avail.
Cheers
Sent from my I9300 (ArchiDroids 4.4)
Click to expand...
Click to collapse
Seems you have everything set up right?? I really don't know what to suggest... If you have another computer or laptop maybe try it on alternative machine just in case...
CWM require for All winner 13 JB 4.2.2
I am attaching recovery and fstab of my device please create me a CWM recovery
i will sort you out a recovery and pm it to you it will take some time though so give a day max...
very good program!
have an energy a4 (a13 4.3 "inch 480 x 272 pixels), I tried to install any rom but all do not look good for the resolution.
I've also tried to modify the system configuration Dragonface rom but I can not compile the rom .. or firmware does not support the tool to modify
only I have to change it to boot
Code:
;RGB 480x272 module name:KD43G18-40NB-A11
lcd_x =480
lcd_y =272
lcd_dclk_freq = 12
lcd_if = 0
lcd_hbp = 2
lcd_ht = 525
lcd_vbp = 2
lcd_vt = 572
thanks!!
I am looking for ROM for Tablet ZC-708B with Allwinner Tech A13 D1026CA 21G1 chipset.
Hello
I am looking for ROM for Tablet ZC-708B
Processor : Allwinner Tech A13 D1026CA 21G1
The board labels : Q8A_V2 2012-12-27 CPT2
Wifi : Realtek RTL8188EUS
Power Controller : AXP209
Controller Touch Screen : Silead GSL1680
Camera : KJT B5061 V1.0T
Another chip (memory) : PEB16-15E
Hynix H27UBG8T2BTR BC 303AA M12W0370Q4
https://docs.google.com/uc?id=0B9yfbmrBB-rBdlFYZEpzWEpUSGM&export=download
https://drive.google.com/file/d/0B9yfbmrBB-rBdlFYZEpzWEpUSGM/edit
This workong
---- END ----
djd2o said:
very good program!
have an energy a4 (a13 4.3 "inch 480 x 272 pixels), I tried to install any rom but all do not look good for the resolution.
I've also tried to modify the system configuration Dragonface rom but I can not compile the rom .. or firmware does not support the tool to modify
only I have to change it to boot
Code:
;RGB 480x272 module name:KD43G18-40NB-A11
lcd_x =480
lcd_y =272
lcd_dclk_freq = 12
lcd_if = 0
lcd_hbp = 2
lcd_ht = 525
lcd_vbp = 2
lcd_vt = 572
thanks!!
Click to expand...
Click to collapse
Work touch and screen in 4.3" but systemui.apk FC.....
how to adapt systemui.apk? I fail to prevent FC
SUPPORT
as described in the OP for any Q&A related posts please post in the dedicated Q&A Thread here >> http://forum.xda-developers.com//android/help/qa-zeus-toolkit-t2908060
This thread is not monitored and posts should only relate to the development of the tool..
Thank You
Inside 4ndroid said:
as described in the OP for any Q&A related posts please post in the dedicated Q&A Thread here >> http://forum.xda-developers.com//android/help/qa-zeus-toolkit-t2908060
This thread is not monitored and posts should only relate to the development of the tool..
Thank You
Click to expand...
Click to collapse
Sorry for bumping this thread, but is there a fix for your zeus tool for windows 8.1. its not running.
EDIT forgot to mention that I have the same problem as the other user stated. nothing happens when pressing analyze device.
Is this compatible with the quad core a13s?
Version 5 released
just a bump for the new version as described in changelog alot has been fixed an the tool should work flawlessly now. REMEMBER to make sure you have your adb drivers installed and there is no support for windows 8 at the moment..
Hit thanks if it works well for you and vote in the poll at the top of thread
enjoy
Inside 4ndroid said:
just a bump for the new version as described in changelog alot has been fixed an the tool should work flawlessly now. REMEMBER to make sure you have your adb drivers installed and there is no support for windows 8 at the moment..
Hit thanks if it works well for you and vote in the poll at the top of thread
enjoy
Click to expand...
Click to collapse
nice to see you still working on this, one thing tho in the previous version i couldn't get the recovery to install. It said installation successful but it wasn't. Did you fix this problem or was this something with the tablet?
kirito9 said:
nice to see you still working on this, one thing tho in the previous version i couldn't get the recovery to install. It said installation successful but it wasn't. Did you fix this problem or was this something with the tablet?
Click to expand...
Click to collapse
the problem should be fixed in version 5.0 if you still have any problems pm me an i will help you out..
djd2o said:
very good program!
have an energy a4 (a13 4.3 "inch 480 x 272 pixels), I tried to install any rom but all do not look good for the resolution.
I've also tried to modify the system configuration Dragonface rom but I can not compile the rom .. or firmware does not support the tool to modify
only I have to change it to boot
Code:
;RGB 480x272 module name:KD43G18-40NB-A11
lcd_x =480
lcd_y =272
lcd_dclk_freq = 12
lcd_if = 0
lcd_hbp = 2
lcd_ht = 525
lcd_vbp = 2
lcd_vt = 572
thanks!!
Click to expand...
Click to collapse
yu can now modify these settings in the new version of zeus toolkit (v5) lots of stuff fixed and a new menu driven gui