[DEV][cm10]Source build : Jelly Bean[help needed] - Samsung Galaxy SL i9003

Guys currently i am downloading the cm10 sources and its 95% done after the completion i will start the development, so the thing is to post this thread is that i want some dev's who are ready to help me in this project. See i am not doing this for me its for all of us...I am not forcing anyone here to join me and all.. i just want some interested ppls who are ready to help ...
jus comment if you are willing to join and make it a success ... thank you.

Ravi H Basawa said:
Guys currently i am downloading the cm10 sources and its 95% done after the completion i will start the development, so the thing is to post this thread is that i want some dev's who are ready to help me in this project. See i am not doing this for me its for all of us...I am not forcing anyone here to join me and all.. i just want some interested ppls who are ready to help ...
jus comment if you are willing to join and make it a success ... thank you.
Click to expand...
Click to collapse
I think dhiru already ported cm10 for our device, but he stopped further development due to an incomplete ICS which he thinks should become stable first before going to CM10.
I'm not saying that you shouldn't do dev for cm10. Maybe you and dhiru can work together on cm10. Thanks. :good:

cm 10 JB download completed
Guys good news i ve just now completed the JB source download

can any one tell me which lunch file ive to use to config our device ??:->
You're building on Linux
Lunch menu... pick a combo:
1. full-eng
2. full_x86-eng
3. vbox_x86-eng
4. mini_armv7a_neon-userdebug
5. mini_armv7a-userdebug
6. full_panda-userdebug
7. cm_captivatemtd-userdebug
8. cm_crespo-userdebug
9. cm_crespo4g-userdebug
10. cm_d2att-userdebug
11. cm_d2spr-userdebug
12. cm_d2tmo-userdebug
13. cm_d2usc-userdebug
14. cm_d2vzw-userdebug
15. cm_evita-userdebug
16. cm_fascinatemtd-userdebug
17. cm_galaxysmtd-userdebug
18. cm_galaxysbmtd-userdebug
19. cm_grouper-userdebug
20. cm_i9100g-userdebug
21. cm_jewel-userdebug
22. cm_maguro-userdebug
23. cm_quincyatt-userdebug
24. cm_p3100-userdebug
25. cm_p3110-userdebug
26. cm_p3113-userdebug
27. cm_p5100-userdebug
28. cm_p5110-userdebug
29. cm_p5113-userdebug
30. cm_p930-userdebug
31. cm_su640-userdebug
32. cm_tf101-userdebug
33. cm_tf201-userdebug
34. cm_tf300t-userdebug
35. cm_toro-userdebug
36. cm_toroplus-userdebug
37. cm_vibrantmtd-userdebug
38. cm_ville-userdebug

I highly suggest you pm dhiru for advice because as stated above, he has built it already. It would also allow you to start off nice

bscraze said:
I highly suggest you pm dhiru for advice because as stated above, he has built it already. It would also allow you to start off nice
Click to expand...
Click to collapse
already messaged dhiru .. hope i will get a reply from him soon

Good luck Ravi H Basawa Hope everything goes nice with you

I think its galaxysmtd...
Not sure.
Sent from my GT-I9003 using xda app-developers app

Ravi H Basawa said:
already messaged dhiru .. hope i will get a reply from him soon
Click to expand...
Click to collapse
Dhiru has already a build CM10 which doesnt boot but due to lack of time he is not able to work on ICS & cm10.

Doesn't boot? I'm sure I saw a screenshot of cm10 by dhiru.
Sent from my GT-I9003 using xda app-developers app

vishal24387 said:
Dhiru has already a build CM10 which doesnt boot but due to lack of time he is not able to work on ICS & cm10.
Click to expand...
Click to collapse
It boots... As BassBlaster said, dhiru did post the screenshot.

ammar786 said:
It boots... As BassBlaster said, dhiru did post the screenshot.
Click to expand...
Click to collapse
If I remember correctly I had talked with Dhiru over facebook chatting. He had told me that he has some problem with partition problem with new cm10 base rom which is not booting properly. So he had pm that rom to hillbeast to look into problem. Bat as we know they both are busy so there is no further development in CM10 rom.
I hope LG will soon release ICS for optimus 2x which will help dhiru to have stable CM9.

vishal24387 said:
If I remember correctly I had talked with Dhiru over facebook chatting. He had told me that he has some problem with partition problem with new cm10 base rom which is not booting properly. So ye had pm that rom to hillbeast to look into problem. Bat as we know they both are busy so there is no further development in CM10 rom.
I hope LG will soon release ICS for optimus 2x which will help dhiru to have stable CM9.
Click to expand...
Click to collapse
i think u have mistakenly written optimus 2x bcoz our sl has specifications to optimus black.but if i am wrong then optimus 2x is getting ics in korea http://www.gsmarena.com/lg_outs_ice_cream_sandwich_update_for_the_korean_optimus_2x-news-4721.php

pratik_s said:
i think u have mistakenly written optimus 2x bcoz our sl has specifications to optimus black.but if i am wrong then optimus 2x is getting ics in korea http://www.gsmarena.com/lg_outs_ice_cream_sandwich_update_for_the_korean_optimus_2x-news-4721.php
Click to expand...
Click to collapse
i think so :fingers-crossed:

pratik_s said:
i think u have mistakenly written optimus 2x bcoz our sl has specifications to optimus black.but if i am wrong then optimus 2x is getting ics in korea http://www.gsmarena.com/lg_outs_ice_cream_sandwich_update_for_the_korean_optimus_2x-news-4721.php
Click to expand...
Click to collapse
Ooops...I wanted to say optimus black.

need help ..
guys need ur help badly ... pls don't move to off topic ... pls help me in selecting the lunch file below ...
Lunch menu... pick a combo:
1. full-eng
2. full_x86-eng
3. vbox_x86-eng
4. mini_armv7a_neon-userdebug
5. mini_armv7a-userdebug
6. full_panda-userdebug
7. cm_captivatemtd-userdebug
8. cm_crespo-userdebug
9. cm_crespo4g-userdebug
10. cm_d2att-userdebug
11. cm_d2spr-userdebug
12. cm_d2tmo-userdebug
13. cm_d2usc-userdebug
14. cm_d2vzw-userdebug
15. cm_evita-userdebug
16. cm_fascinatemtd-userdebug
17. cm_galaxysmtd-userdebug
18. cm_galaxysbmtd-userdebug
19. cm_grouper-userdebug
20. cm_i9100g-userdebug
21. cm_jewel-userdebug
22. cm_maguro-userdebug
23. cm_quincyatt-userdebug
24. cm_p3100-userdebug
25. cm_p3110-userdebug
26. cm_p3113-userdebug
27. cm_p5100-userdebug
28. cm_p5110-userdebug
29. cm_p5113-userdebug
30. cm_p930-userdebug
31. cm_su640-userdebug
32. cm_tf101-userdebug
33. cm_tf201-userdebug
34. cm_tf300t-userdebug
35. cm_toro-userdebug
36. cm_toroplus-userdebug
37. cm_vibrantmtd-userdebug
38. cm_ville-userdebug

crk1995 said:
I think its galaxysmtd...
Not sure.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
galaxysmtd is for i9000 bro .. so m not getting !!... and dhiru is also not replying ...

vishal24387 said:
Dhiru has already a build CM10 which doesnt boot but due to lack of time he is not able to work on ICS & cm10.
Click to expand...
Click to collapse
vishal vishal this will shock the nuts outa u
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Ravi H Basawa said:
galaxysmtd is for i9000 bro .. so m not getting !!... and dhiru is also not replying ...
Click to expand...
Click to collapse
try asking alfrix or hillbeast......
and dont ask such questions in the general section...the few devs we have here usually dont bother browsing the general section

It's not as easy as many of you think to build cyanogenmod from source. Firstly you have to "prepare" the code for our device as it is not included in CM repositories. You can do so by downloading device and vendor files from Dhiru's repository. Once you do that, our device will appear in the device tree so you can choose it to build.
Also, with CM10 you have the problem of the system partition being too small for all the system and GAPPS. You would have to link some of the files to the data partition so that the system can fit in that partition.
Sent from my GT-I9003 using xda app-developers app

Related

[JB:CM10:HYBRD] PARANOIDANDROID [2.00, True HybridMode, Size & UI on Per App Basis]

[JB:CM10:HYBRD] PARANOIDANDROID [2.00, True HybridMode, Size & UI on Per App Basis]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an ongoing developer project to make way for a modification that will entirely transform your device, but retain the aesthetics and the experience of your phone.
For more information about PARANOIDANDROID please check this website
Download Links:
ParanoidAndroid JB Builds for Defy and Defy+ (Current Version: 2.00 Built from source)
JB gapps
Click to expand...
Click to collapse
ParanoidAndroid Final ICS Build for Defy (Version: 1.5 Based on Quarx 16/07)
hybrid_gapps for ICS only
Click to expand...
Click to collapse
0. Back up your ROM
1. Wipe data/factory and cache
2. Wipe dalvik cache
3. Flash the ROM
4. Flash the ics gapps
5. Wipe data/cache again.
6. Reboot
Click to expand...
Click to collapse
Click to expand...
Click to collapse
-Go to paranoidandroid settings - configuration - choose tablet optimised
-Change the dpi for systemui and framework-res to 160 (for ICS only)
-Go to system - navigation bar - select softkeys
-Toggle "expand desktop" by pressing the power button for switching to full screen while playing games or using any other full screen app.
The beauty of this ROM is in customizing it, the better u play with paranoidandroid settings, the better u will make the look of the ROM. Advanced users shud share the customization here in this thread, I will add those in the OP.
Click to expand...
Click to collapse
Most of the problems are faced if you dont really know how to play with dpi settings. Please read the ParanoidAndroid FAQ Here
Any other problem, You can always report it here in the thread, I shall be happy to help.
Click to expand...
Click to collapse
Bugs:
FM Radio doesn't work (you can use spirit FM)
Click to expand...
Click to collapse
A Special Thanks to Quarx and Kayant.
Thanks to these guys for general help : cdesai, m11kkaa, gokussjx, scott.hart.bti, skeevy420
D4rKn3sSyS, molesarecoming and other PA members.
ldiomedi for the images
Click to expand...
Click to collapse
Warning: Please flash this ROM at your own risk, I am not responsible for any damage that you make to your phone. Be cautious however it is not expected to harm ur defy
Click to expand...
Click to collapse
HAPPY TO HELP
Thanks for share...
Borat says : Its nice :laugh:
Thnx a ton.....now one more raining imp rom is aokp.....den d collection is full.....heeeehaaawwwww ...!!!!!
Btw....dis one for defy/defy+/froyo/gb?????....shed some light on that ......n it can b installed on virtual rt?????
Sent from my MB525 using xda app-developers app
thanks mate
Bhai , getting bootloops again and again . was on wr 1.6 , green lense defy , wiped everything , flashed 2nd build , flashed kernel ,flashed ui fixes and then wiped cache and data . still getting bootloops. dimaag khaarab ho gya hai bro !!
Hey thanks and good luck
Sent from my MB525 using xda app-developers app
what nightly did you use as the base ROM
Is it quarx's 8th march (HWA) ?
in what sbf froyo?
for defy green lense?
flashing method?
usb will be fixed i know wat must hav gone wrong
also plz specify which kernel and wat nightly was used to port
nogoodusername said:
usb will be fixed i know wat must hav gone wrong
also plz specify which kernel and wat nightly was used to port
Click to expand...
Click to collapse
From the screen shots , i can tell its froyo kernel .
however cant say anything about the base rom.
kanpurite said:
what nightly did you use as the base ROM
Is it quarx's 8th march (HWA) ?
Click to expand...
Click to collapse
i think it cant be quarx 8th march nightly , as it is a 4.0.4 ROM
Update PARANOIDANDROID Version to 1.5a
If you will update the PARANOIDANDROID version the USB Bug will disappear
I just woke up to add the download link.
need some sleep, till then happy flashing:
Its based on the latest nightly of Epsylon3 (27062012) with froyo kernel.
procedure if u r on froyo cm9 by epsy:
wipe data/factory and cache
flash the ROM
flash the ics gapps
wipe again.
reboot
go to paranoidandroid settings - configuration - choose tablet optimised and reboot.
enjoy the ROM and play with it
Please note that this is a port from Galaxy S2 and there are some parts which still needs to be modified. There is no file explorer in the rom so please download one from market. I ported in a hurry. As of now there is still cm9 bootanimation. I shall release an update.zip very soon containing fixes.
What do you mean by usb not working?
is it just no adb or no connectivity at all
At the moment no usb connectivity but it shud not be a big problem to fix.
Sent from my defy
brajesh.sharma87 You are the man
Wow WoW WOW WOW finally a great news
Its a great pleasure and joy to see this dream come true
:good: :good: :good:
@ brajesh.sharma87 : Thank you many milion times more
I wish i could have a pm from you includes your details for money transfer using Wistren Union cause its the only way i have to donate , Please i want to feel that i helped
Hey thanks for the appreciation.
However if u really wnt to donate, please donaye to m11kkaa, the one who developed multiboot but never got any donation :-/
P.s did u flashed the rom? I just wanted to confirm that it was a gud upload.
Sent from my defy
i flashed it it booted fine i found no bugs in my brief use of it (which isn't down to bad development, i was just having a quick try)
hybrid UI in portrait mode is working on this port?
Thanks for porting this ROM... hope anyone port a Sense 4 ROM

Discussion Thread on Epsylon’s CM Build..

Please use this thread for all your discussion about the CM for the Galaxy R.
It is important to note that Nightly Builds are not for most Users​
Things to know about Nightly Builds:
Not Stable releases
Will have bugs / issues
Not intended to be used as everyday ROM
Are not Fully Supported like Stable Releases
You Should be comfortable enough to recover from soft bricks On your OWN
As many of you know Epsylon has released the CM 7 alpha build for Galaxy R, so I am creating this thread for discussion on CM 7 build’s..
What is CyanogenMod:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
CM Features: Click here
List of apps in CM and app details: Click here
CyanogenMod Settings: Click here
For more details click here
KNOWN ISSUES
Camera
Bluetooth
Working Feature's
Phone Calls
WIFI
Mobile data
Messaging
Music
Sensors
Many Cyanogen features...
And many more...
INSTRUCTIONS
Please make sure you have taken CWM Backup before proceeding...
First time installing CyanogenMod to your Galaxy R, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps (Link)
- Boot into Recovery
- Flash CM zip
- Flash GApps zip
- DO A DATA WIPE / FACTORY RESET
- Reboot
Upgrading from earlier version of CyanogenMod:
- Copy CM ZIP to your internal SDCard
- Boot into Recovery
- Flash CM zip
- Reboot
DOWNLOADS
You can download the latest build's from(here)
DEVELOPMENT THREAD
This thread is for dev purpose click here
Note: Please don't ask for ETA's....
FAQ's for Cyanogen MOD ROM's..
Boot Animation:
Download CID Boot animation from here
CM7 Themes:
Themes Repository
Screen Shot's:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mj.vikram said:
KNOWN ISSUES
Some apps
Camera
Bluetooth
Vibration
Working Feature's
Mobile data
Messaging
Music
Sensors (some times it stops working)
Root access
Many Cyanogen features...
And many more...
Click to expand...
Click to collapse
You forgot to include "Phone calls/Network" in the working features. That's a main point. If it's there, then only people will think on flashing it.
1337SereniTyx3 said:
You forgot to include "Phone calls/Network" in the working features. That's a main point. If it's there, then only people will think on flashing it.
Click to expand...
Click to collapse
updated with phone calls & WIFI...
Hi vikram,
Show me some cm7 screen shots including "about phone" details(ram details) and quadrant benchmarks.
Sent from my GT-I9103 using Tapatalk 2
Manjunath324 said:
Hi vikram,
Show me some cm7 screen shots including "about phone" details(ram details) and quadrant benchmarks.
Click to expand...
Click to collapse
uploaded the screen shots....
Good work buddy. :good:
This will help keep the CM Dev thread clean.
Ummm....I have a question. After this ROM is finally ready for daily use...I mean I know this is going to take time, but will the Galaxy R then appear on the official CM site as a supported device?
The-Droidster said:
Ummm....I have a question. After this ROM is finally ready for daily use...I mean I know this is going to take time, but will the Galaxy R then appear on the official CM site as a supported device?
Click to expand...
Click to collapse
Yes buddy Epsylon told he will try to add our mobile in CM supported device list, may be once we get the stable build.....
mj.vikram said:
Yes buddy Epsylon told he will try to add our mobile in CM supported device list, may be once we get the stable build.....
Click to expand...
Click to collapse
Sounds cool.....woooaah....STABLE BUILD....of the CM7.2 for our Galaxy R....even the thought makes me feel proud n happy:laugh: Thanx to all the devs...especially @epsylon3
im currently on neorom3 (xwla4)
can i flash direct?
does this cm have hardware accelaration? i heard some other device became 2x so good after cm !
is it faster than neov3 ?
Sent from my GT-I9103 using xda premium
@vikram
Nice work buddy.
It looks clean & organized now...
Sent from my GT-I9103
Birki96 said:
im currently on neorom3 (xwla4)
can i flash direct?
does this cm have hardware accelaration? i heard some other device became 2x so good after cm !
is it faster than neov3 ?
Click to expand...
Click to collapse
Buddy its still alpha state so you can try it but still so many bug's are there....
yes you can flash on Neo V3 but follow the instruction's......
Happy flashing ....
Birki96 said:
im currently on neorom3 (xwla4)
can i flash direct?
does this cm have hardware accelaration? i heard some other device became 2x so good after cm !
is it faster than neov3 ?
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
Don't flash it on XWLA4! When I did, I had to face force close problems and no auto synchronization. Also I couldn't sign into my google account.
So then I flashed ZSLE6 first and then flashed this ROM. Then everything worked perfectly [Those which should work].
Sent from my GT-I9103 using Tapatalk 2
1337SereniTyx3 said:
Don't flash it on XWLA4! When I did, I had to face force close problems and no auto synchronization. Also I couldn't sign into my google account.
So then I flashed ZSLE6 first and then flashed this ROM. Then everything worked perfectly [Those which should work].
Click to expand...
Click to collapse
I've also flashed on Neo V3 only buddy but i haven't faced any issues....
@vikram
Kindly include the step to take a backup of the previous firmware as a step before all the others.
In case of boot loop they can restore their previous firmware from the backup created. I've just added this in the FAQ's.
Correct me if I'm wrong ?
EDIT:
- A few FAQ's have been added here & more are gonna be added soon, will try to keep on updating them through all the upgrades CM ROM receives but kindly do not have a discussion on this thread: http://forum.xda-developers.com/showthread.php?t=1773917
- If you want me to add some new Q & A then post it in that thread, I'll add it asap.
Guys I am still not getting incoming calls on the build CM72-20120714-NIGHTLY-Galaxy-R.zip
I am pretty sure, I flashed it correctly. Anyone else facing this issue?
I was so convinced this morning that I will never have to back to stock rom again on my Galaxy R. Still haven't reverted back but sooner or later I will have to if I can't fix this.
Any help is appreciated.
First of all I am really happy that SGR getting CM support :victory:
Now I fallow all instruction but when I flash it on my sgr with CWM 4.0.0.2 and than CWM 5.5 both I face same problem
I got msg zip package flashed successfully but when i boot my mobile it's keep repeating boot animation and didn't boot up I waited for 10 mins.
any one facing same problem plz help me
mj.vikram said:
I've also flashed on Neo V3 only buddy but i haven't faced any issues....
Click to expand...
Click to collapse
Don't know then. Maybe it happened with me only. Don't know how and why...
Sent from my GT-I9103 using Tapatalk 2
I have one question obout cm9
How can it be that there are cm9 roms for lg p990?? They dont even have official ics for drivers??
How did they get that?
Sent from my Big R 6343Antutu
dack1612 said:
First of all I am really happy that SGR getting CM support :victory:
Now I fallow all instruction but when I flash it on my sgr with CWM 4.0.0.2 and than CWM 5.5 both I face same problem
I got msg zip package flashed successfully but when i boot my mobile it's keep repeating boot animation and didn't boot up I waited for 10 mins.
any one facing same problem plz help me
Click to expand...
Click to collapse
Maybe you can try wipe data / factory reset again in recovery.
It once happened to me on the Blade while flashing CM7 when wipe data again did the trick.
---------- Post added at 04:49 PM ---------- Previous post was at 04:41 PM ----------
parajsinghal said:
Guys I am still not getting incoming calls on the build CM72-20120714-NIGHTLY-Galaxy-R.zip
I am pretty sure, I flashed it correctly. Anyone else facing this issue?
I was so convinced this morning that I will never have to back to stock rom again on my Galaxy R. Still haven't reverted back but sooner or later I will have to if I can't fix this.
Any help is appreciated.
Click to expand...
Click to collapse
Can someone at least confirm if I am using the right zip file? I even verified md5sum and my zip is 100% correct.
I reverted back to stock everything works fine. Then I tried again with CWM 4.0.0.2 and still no incoming calls.
Someone please help me. Am I doing something wrong or am I the only unlucky one?

[ROM & KERNEL][PORT] CyanMobile Experience Stable Release 2.3.8

THIS CM7 ROM IS BUILD FROM SOURCE WITH MODIFICATION FROM AOSP AND AOKP
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR DEVICE BY FLASHING THIS ROM
highly recommended to charge your cell phone at least 90% to prevent failure during flashing process..
THIS ONLY FOR GT-S5670 NOT OTHERS​
ITS RECOMMEND TO PARTITION YOUR SDCARD BEFORE FLASH​
Click to expand...
Click to collapse
I AM POSTING THIS ROM AFTER TAKING PERMISSIONS FROM SQUADZONE​
Working : Everything
Not Working : U guys play with ROM and Comment
How to Flash CyanMobile ROM :​
Download and copy the latest CMobile ROM to SD Card
Reboot to Recovery Mode
Select Wipe data and cache
Select install zip from sd card
Select choose zip from sd card
Select the new CMobile ROM
Select Yes - Install update
Wait until the Installation is finish
Select Wipe data and cache
Select Wipe cache partition
Select reboot system now
MY PREVIOUS RELEASES
Cyanogenmod RC5.1
Cyanogenmod RC5.2
Cyanogenmod RC5.3
Cyanogenmod RC5.4
Cyanogenmod RC5.5
Cyanogenmod RC5.6
Cyanogenmod RC6.1
Thanks to Squadzone
Link for Orignal Thread of Cyanmobile for Mini
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Screenshots
​
Downloads
CyanMobile eXperience 20121020 Release - Download
Google Apps (For Google Play and Other Google Apps) - Download
Old Links
CyanMobile eXperience 20120830 Release - Download
CyanMobile eXperience Stable Release - Download
Just want to ask one question - " why have u posted [PORT] of a ROM which will be already available for Galaxy Fit by Squadzone himself within a few days?",are there some additional features by you in this port?..
[NO offence]
neil.richard said:
Just want to ask one question - " why have u posted [PORT] of a ROM which will be already available for Galaxy Fit by Squadzone himself within a few days?",are there some additional features by you in this port?..
[NO offence]
Click to expand...
Click to collapse
Squadzone officially released a new Cyanmobile yesterday only for 3 devices
and long time ago he has also announced that he has stooped development for galaxy fit
neil.richard said:
Just want to ask one question - " why have u posted [PORT] of a ROM which will be already available for Galaxy Fit by Squadzone himself within a few days?",are there some additional features by you in this port?..
[NO offence]
Click to expand...
Click to collapse
I think we will not get the stable release........check out the mad team forum......he released the stable release for 3 phones.....and said that for other devices u will have to port it........
Sent from my GT-S5670 using xda premium
ankkdroid said:
Squadzone officially released a new Cyanmobile yesterday only for 3 devices
and long time ago he has also announced that he has stooped development for galaxy fit
Click to expand...
Click to collapse
Ya!...I know that!...I thought he will continue fit project also! Lol...Thanx alot for porting it bro!...By the way can u also port the kernels that Squadzone uses in Mini because they are really fast, stable and efficient than any other kernels!...Please try to port the kernel as well!
neil.richard said:
Ya!...I know that!...I thought he will continue fit project also! Lol...Thanx alot for porting it bro!...By the way can u also port the kernels that Squadzone uses in Mini because they are really fast, stable and efficient than any other kernels!...Please try to port the kernel as well!
Click to expand...
Click to collapse
Definitely buddy
m working on kernel
ankkdroid said:
Definitely buddy
m working on kernel
Click to expand...
Click to collapse
so when we will get the download link?:fingers-crossed:
also see this........
http://madteam.co/forum/general/cyanmobile-experience-port-permission/
droider007 said:
so when we will get the download link?:fingers-crossed:
also see this........
http://madteam.co/forum/general/cyanmobile-experience-port-permission/
Click to expand...
Click to collapse
Download link will be posted in 1 or 2 hours most probably
Link Available Guys
Welcome bro...........Go on
wifi not working for me......
some more features but not stable....
same as 26-06-2012.....
droider007 said:
wifi not working for me......
some more features but not stable....
same as 26-06-2012.....
Click to expand...
Click to collapse
Wifi Fixed
Uploading the ROM
tell me what else is not working
ankkdroid said:
Wifi Fixed
Uploading the ROM
tell me what else is not working
Click to expand...
Click to collapse
when music is playing then lockscreen is a bit laggy.........plz fix that
Sir, after fixing everything please upload the ROM on dropbox!...
Can anyone check whether video recording is fine or its laggy?
neil.richard said:
Sir, after fixing everything please upload the ROM on dropbox!...
Can anyone check whether video recording is fine or its laggy?
Click to expand...
Click to collapse
video recording is fine............
One question.....is this same with cyanomobile build by squadzone? If yes....can't use a2sdgui or another script...and its very laggy......
Sent from my GT-S5670 using xda premium
neil.richard said:
Sir, after fixing everything please upload the ROM on dropbox!...
Can anyone check whether video recording is fine or its laggy?
Click to expand...
Click to collapse
Uploading done on Mediafire
Download it from there
ROM IS NOW BUG FREE
minz_katro said:
One question.....is this same with cyanomobile build by squadzone? If yes....can't use a2sdgui or another script...and its very laggy......
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
Now its not at all laggy
just try it
If you have problem running S2E then plz tell me

[ROM & KERNEL] CyanogenMod 7.2.0 RC-1 Release [Latest 15/12/2012 Build]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Folks, Welcome to this Thread. Hereby i present Unofficial CyanogenMod 7.2.0 Compiled By Me via Source.
CyanogenMod 7.2 is a free, community built, aftermarket firmware distribution of Android 2.3.7 (Gingerbread), which is designed to increase performance and reliability over stock Android for your device.
Some Features Of This ROM Are :
# Fresh Build With Latest Source [12/11/2012]
# OC Kernel Included
# Zip aligned at boot
# Updated Bootanimation
# Speed optimizations
# 15 Kernel Governors
# Many Fixes And Stability Updates
# To Know More You Have To Try This ROM
Whats Working?
-Everything
Bugs
You Guys Report Me With Logcat!
Kernel Source: https://github.com/The-Superman/android_kernel_samsung_msm
ScreenShots
Procedure & Requirements
Requirements:
YOUR DEVICE MUST BE FLASH TO GINGERBREAD 2.3.6 OR ABOVE
CWM Recovery
Procedure To Install:
Download and copy the latest CMobile ROM to SD Card
Reboot to Recovery Mode
Select Wipe data and cache
Select install zip from sd card
Select choose zip from sd card
Select the new CMobile ROM
Select Yes - Install update
Wait until the Installation is finish
Select Wipe data and cache
Select Wipe cache partition
Select reboot system now
Downloads
CyanogenMod 7.2.0 RC1 [15/11/2012] Build
CyanogenMod 7.2.0 Kernel
Credits
This Project Was Not Possible Without:
Guys Please Press Thanks To Them Too
#My Best Friends (For Inspiring Me)
#My Father (For Giving Me G-Fit)
#Google (For Wonderful Android)
#Speed_bot (For Helping Me Always)
#Wilfredcool007 (For Helping Me Always)
#Tj_Styles(For CWM)
#xda(For The Platform)
#Me( For The Efforts )
superb work sir
RishabhAd said:
CyanogenMod 7.2.0 RC1 [15/11/2012] Build
Click to expand...
Click to collapse
Hey nice work bro..
dwlodng rite nw. keep updating..:good:
speed_bot said:
superb work sir
Click to expand...
Click to collapse
LOL! Sir sounds funny
Rohit02 said:
Hey nice work bro..
dwlodng rite nw. keep updating..:good:
Click to expand...
Click to collapse
Thanks Buddy...Gimme review
Some of the for me best ponits of this rom
Preinstalled S2E working very fine
fast and smooth at 604 MHz
TitaniumBackup-backups work without any problem
small and somewhat cleaned out system (for example the email-apk is pre-deleted, saving me some time )
Only "bug" I experienced: After switching some options for the notification bar right after flashing the Rom, the statusbar was gone until a restart. I couldn't repoduce this "bug", so no logcat :angel:
nice,smooth and fast rom.........
Scybalon said:
Some of the for me best ponits of this rom
Preinstalled S2E working very fine
fast and smooth at 604 MHz
TitaniumBackup-backups work without any problem
small and somewhat cleaned out system (for example the email-apk is pre-deleted, saving me some time )
Only "bug" I experienced: After switching some options for the notification bar right after flashing the Rom, the statusbar was gone until a restart. I couldn't repoduce this "bug", so no logcat :angel:
Click to expand...
Click to collapse
Thnx for d review. Il try to fix that bug ASAP
kevinbobo123 said:
nice,smooth and fast rom.........
Click to expand...
Click to collapse
Thank you so much
Hey flashed the rom last night.
Must say superb work bro..
very smooth and nicely themed. this is wat i dint liked in official CM7.
everything working fine. dint tried reverse tethering as i dnt need it..
TB worked but wen i did batch restore and rebooted it went in bootloop. My bad as i had backed up S2E dnt knw wat happend then again flashed the rom and restored only wat was needed.
Keep updating..thanx again
Rohit02 said:
Hey flashed the rom last night.
Must say superb work bro..
very smooth and nicely themed. this is wat i dint liked in official CM7.
everything working fine. dint tried reverse tethering as i dnt need it..
TB worked but wen i did batch restore and rebooted it went in bootloop. My bad as i had backed up S2E dnt knw wat happend then again flashed the rom and restored only wat was needed.
Keep updating..thanx again
Click to expand...
Click to collapse
Thank you so much for trying n review
RishabhAd said:
Thank you so much for trying n review
Click to expand...
Click to collapse
dnt just say.. press it..
Hey Rishab in ur next relese pl fix the battery issue.. dnt why bt alike official cm7 the battery back up is to moderat..
i listen songs for 3 hrs a day, lil tym fr facebook whatsapp n dwnlodngto very negligible extent, and EOD battery drains completly with 10% remaining..
thanx a lot.
:good:
bro can u please upload this rom somewhere else i am not able to download this rom from mediafire due to my ip restrictions (like on dropbox,box etc plz)
thanks beforehand
i_piss_on_apple said:
bro can u please upload this rom somewhere else i am not able to download this rom from mediafire due to my ip restrictions (like on dropbox,box etc plz)
thanks beforehand
Click to expand...
Click to collapse
yup wait some time for mirror
downloading it
dude i just wanna knw is der any need of Gapps I mean whether we hav to flash Gapps or not?

[ROM][CM10.1.3][GT-S7500]Flash cyanogenmod 10.1.3 on your GT-S7500

How to flash CM10.1.3 on galaxy ace plus + camera fix​
Hi Guys! I will show you in this thread how to flash the CM10.1.3 on galaxy ace plus and how to fix the camera!
Disclaimer: By downloading and flashing/installing any of TheWhisp's files on your device, I am not responsible for any damage done to your phone and/or anything else that dissatisfies you. The development process is in an early stage, that means, anything can happen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First Check That You Have These Things:
All Samsung drivers already installed
GT-S7500 ONLY (NO OTHER VARIANTS!)
All neccessary packages Downloaded
Windows PC
Patient
Now you have to flash cwm on your phone,I prefer 5.0.2.8 :
1)Download the cwm package(recovery.tar)
2)Download odin3 and extract
3)Now you have to enable USB Debugging in your phone By going to Settings=>Applications=>Development
4)Now turn off your device and boot into download mode(volume down+home+power) and press volume up to continue
5)In your PC open odin3 and connect your phone to your computer,wait until ID:COM turn yellow in odin3
6)Make Sure that "Auto Reboot" and "F.Reset Time" are checked and "Repartion" is UNCHECKED
7)Press PDA and choose the cwm package (it must be a .tar or .tar.md5 package) and press start
8)Wait 1 min and odin will finish the process,you will see PASS and your phone will Reboot
What's working:
Full GPU acceleration
RIL (calls/sms/mobile data)
Touchscreen
Touch keys
Multi touch
Audio
Adb
Mounting of internal/external storage
UMS
Keypad Lights
Brightness control
Vibrator
Deep sleep
GPS,, Sensor
USB
Data Usage
Bluetooth
Camera
Wi-Fi AP
radio fm
charging off-line
What's not working:
Camcorder
Flash light
Now flashing the cm10.1.3 rom:
1)Download the cm10.1.3 rom from here http://www.mediafire.com/?cft4ug29b2am587
and gapps from here http://goo.im/gapps/gapps-jb-20130301-signed.zip
2)Copy these packages to the root of your External SD of your phone
3)Turn off your device and boot to recovery mode(volume up+volume down+home+power)
Wipe data/factory reset,wipe cache and wipe davilik cache
4) Now press "install zip from sdcard" than "choose zip from sdcard" and then select the cm10.1.3 package and "Yes"
5)Wait to finish installation and now repeat the same thing but choose the gapps package instead of the cm10.1.3 package
6)When it finish,press "Reboot System Now"
That's it!The cm10.1.3 is now successfully installed and your android version is 4.1.2 !!
NOTE:The first boot will take some time(~5min) so don't panic!!!
If you want to fix the camera just proceed to this thread http://forum.xda-developers.com/showthread.php?t=2345981
But maybe the camera will work,so check it before doing anything.
Credits:
thewhisp for Building jellybean rom that was a dream for us
thewhisp for source kernel
So all the credits goes to TheWhisp
JUST I WANT FROM YOU TO HIT THANKS!!
Enjoy!!!!
...
IF you have questions just comment!!
I will reply as fast as i can!!
Why did you made this thead that build of cm10.1 is outdated
Sent from my GT-S7500 using xda app-developers app
Need help please Mr.Dany
Hello,Is the cm10.1 support bbm ?
yjosipy said:
Why did you made this thead that build of cm10.1 is outdated
Sent from my GT-S7500 using xda app-developers app
Click to expand...
Click to collapse
What do you mean by this?!
The cm10.1 is more good than 10.3 or 11 so please don't post comments that don't mean anything!
Nasr Jaber said:
Hello,Is the cm10.1 support bbm ?
Click to expand...
Click to collapse
Of course,BBM will work on any rom that have android 4.0.4 or up
Thanks
thank you soooo much my galaxy ace plus have now jellybean !!!
Nasr Jaber said:
thank you soooo much my galaxy ace plus have now jellybean !!!
Click to expand...
Click to collapse
Your welcome
I remember this cwm has bootloop issue,and the last cm10.1 the whisper build was missing
Sent from my GT-S7500 using XDA Premium 4 mobile ap
coolfzk said:
I remember this cwm has bootloop issue,and the last cm10.1 the whisper build was missing
Sent from my GT-S7500 using XDA Premium 4 mobile ap
Click to expand...
Click to collapse
Hey bro,yes sometimes if you make a mistake you will stuck in a bootloop but you can fix it by falshing it again!
And by the way i updated the thread to cm10.1.3 which the whisper is working great!
UPDATED!
Hey every body!!I have Updated this thread to cm10.1.3 which is more powerful and thewhisp is working good!!
Enjoy!
Nasr Jaber said:
Hello,Is the cm10.1 support bbm ?
Click to expand...
Click to collapse
bbm in cm10.1 supported :3
longyap said:
bbm in cm10.1 supported :3
Click to expand...
Click to collapse
ohhh idk why m i writing this post alright READ THIS WERY CAREFULLY this build that you are sharing is made by theWisp last sommer and it has no camera(arm pie enabled) its laggy it has no radio in one word its outdated after that build theWisp relased a cm10.1.2 build which was fine it worked pretty well but still a alot of non working stuff then theWhisp stopped compiling builds for sgap and last month a user called techkang compiled a build with almost all bugs fixed.......and dont be rude when a senior is telling you something :angel:
yjosipy said:
ohhh idk why m i writing this post alright READ THIS WERY CAREFULLY this build that you are sharing is made by theWisp last sommer and it has no camera(arm pie enabled) its laggy it has no radio in one word its outdated after that build theWisp relased a cm10.1.2 build which was fine it worked pretty well but still a alot of non working stuff then theWhisp stopped compiling builds for sgap and last month a user called techkang compiled a build with almost all bugs fixed.......and dont be rude when a senior is telling you something :angel:
Click to expand...
Click to collapse
Yes you are right but don't forget that cyanogenmod is an unofficial ROM and have alot of problems.I would recommend to flash the cm10 i tried it everything is fine but no camera.
yjosipy said:
ohhh idk why m i writing this post alright READ THIS WERY CAREFULLY this build that you are sharing is made by theWisp last sommer and it has no camera(arm pie enabled) its laggy it has no radio in one word its outdated after that build theWisp relased a cm10.1.2 build which was fine it worked pretty well but still a alot of non working stuff then theWhisp stopped compiling builds for sgap and last month a user called techkang compiled a build with almost all bugs fixed.......and dont be rude when a senior is telling you something :angel:
Click to expand...
Click to collapse
I am not rude but after 2 hours of working hard to make this guide comments are too bad and I am sad now:crying:
is this rom support arabic language?
Hey danyznd123 plzz change d screenshots they r of cm10 :thumbdown:
Sent from my GT-S7500 using Tapatalk
---------- Post added at 01:07 PM ---------- Previous post was at 01:07 PM ----------
And stop copying threads
Sent from my GT-S7500 using Tapatalk
Amirstars said:
is this rom support arabic language?
Click to expand...
Click to collapse
No arabic
Razzor1508 said:
Hey danyznd123 plzz change d screenshots they r of cm10 :thumbdown:
Sent from my GT-S7500 using Tapatalk
---------- Post added at 01:07 PM ---------- Previous post was at 01:07 PM ----------
And stop copying threads
Sent from my GT-S7500 using Tapatalk
Click to expand...
Click to collapse
How do you understand???
I DIDN'T COPY ANYTHING and if you think so give me the link that i copied of!!!!!!!!
I REGRETED THAT I REGISTERED AND SHARED MY INFOS
i already root my phone gingerbread 2.3.6. if i want to flashing this i must to urooted back? sorry i newbie

Categories

Resources