HI. i am opening these post for people like me that the have the same chineese pad and they cant root it.
I have try to root it with any method but with no succed.
(adb command, z4root, universal root, gingerbreak,oneclick)
at oneclick and adb tablet no recognized as usb. the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
same issue here
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
mounesh25 said:
Hi. I too tried to root this chinese pad (Flytouch 6) but unable to. Also I was trying to update the ROM with HoneyComb but unable to. ANy help is appreciated.
Thanks. Mounesh.
Click to expand...
Click to collapse
Hi my mate. i have found 2 updates i have test one only and i succed to update it.
these is from another forum:
<<ok new download link for firmware update http://www.multiupload.com/5DI5AAL5BQ
i have found a issue with it when you go into android market because this as the latest android market apk it will let you download games etc free and paid but on some it comes up not enough memory,but i noticed by going into settings and clearing google framework and shutting down tablet a few times it allowed me to download a lot more i have put a earlier android market apk on which works perfect,but when i shut down tablet it goes back to newest android market apk?so if you know of a way to delete the android market apk on the tablet let me know?
////////////////////////////////////////////////////
please note before you start you must have your tablet charging with tablet charger otherwise it will not let you put firmware on tablet
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
the way of flash the firmware of v10
sd-card into tablet while turned off
1,press the "menu"+""power"ON button at the same time
2.release the “power” after the boot up.and keep holding menu
3.pls release the "menu" after the there is a flash firmware picture with a android holding a brown bag/box
4. then you will have to do some scrolling with these buttons
5 function of the button front of the device is page up
6 function of the button of "meun" is page down
7 function of the button of "Home" is confirmation (to install firmware)
you will have to scroll to install from sd-card then press home button
you will have to scroll to your firmware them press home button to install
if you ever need to reflash or restart your tablet for any reason you can do this by holding the the on button and menu?which will allow you to reload firmware etc >>
motherofallbattles thanks a lot
chriskleov said:
the first thing that i do, is to change the usb drivers with the usb googles drivers.Than oneclick it found it as rooted!but when i press to root it again i had many errors.
i upload a image with device info that i grap form adb
i am start to thinking that they put some protect that we cant have access at the rom. i use root explore r/o its highlight.its give mt the permissionto delete apk from system./app but later i can find them inside. at the info of taach u can see that device is rooted!
anyway. i found a firmware update but i havent test it yet
Click to expand...
Click to collapse
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Thanks for the update
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
flytouch5.user said:
I am confused as to what USB drivers you used to get the PC to recognize the FlyTouch...can you please provide a download link to these USB drivers you used? I am trying to get my device rooted as well. Thanks.
Click to expand...
Click to collapse
to change the drivers of wopad go to devices and printers.there you will find it as usb storage.there press right click.then hit at the 2nd tab and then prpoerties.chancge manual the drivers.
http://www.megaupload.com/?d=JA6F5VS6
mounesh25 said:
Hi Cheklov,
I did manager to update the firmware using your given link and instructions.
Thanks mate.
BTW...is there a way I can update to honeycomb version?
I've downloaded a few HC versions meant for other tablets like WMT, HTC etc..but no way could I update. Any instructions and link is appreciated.
Thx, Mounesh.
Click to expand...
Click to collapse
i have no idea for custom rom.i think its to early..the chinese pad its to new...no one havent succed to root it.
I ROOT IT!!!!!
FINALY I SUCCED TO ROOT IT!!!
i succed by adb cmds!!
ADB root
ADB shell mount -o remount,rw /system
ADB push su-3.0.3.2-efghi-signed /system/xbin/su
ADB push su-3.0.3.2-efghi-signed /bin/su
ADB shell chown 0.0 /bin/su
ADB shell chmod 04755 /bin/su
ADB shell chown 0.0 /system/xbin/su
ADB shell chmod 04755 /system/xbin/su
ADB shell mount -o remount,ro /system
ADB install -r Superuser-3.0.7-efghi-signed.apk
reboot UNISTALL superuser.apk and INSTALL IT again!
@chriskleov can you tel me more about this updates?
is there update to android 3.0 or higher?
USB OTG control problem
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
wipe data then
try to reflash the upadate
and then aagain wipe
done that
Ive already done that. But result is same.
anyone can help?
mounesh25 said:
Ive already done that. But result is same.
anyone can help?
Click to expand...
Click to collapse
http://www.apad.tv/apadforum/list.php?category/46-Flytouch-5-Wopad-Firmware
Who can tell me why the Navionics Marine 2.1 crashes (force close) after hitting "i agree" in the beginning? Your help would be highly appreciated!
USB problem
hi all
I.ve updated with the file from the above post and noe I have the same problem with the usb
force close - no way to connect to PC
please help
You can try this method to root, it is for another similar vimicro device:
Q: How to root the Haipad M8?
A: You need the GingerBreak and some manual work.
You need to have an installed Android SDK with adb.exe or take this archive with adb.exe only. And you need to have a modified USB driver.
Connect the Haipad M8 to the PC (USB OTG). You will have to install modified USB driver if it is needed.
"USB debugging mode" must be enabled in the device.
Run the cmd.exe and go to a directory where the adb.exe is located (for example: cd d:\adb)
Run command:
Code:
adb root
adb shell
must be # in the prompt (root mode)
Code:
cd /bin
check a symlink su
Code:
ls -l --color=never su
"su -> busybox" is not right. Delete the symlink su
Code:
rm ./su
Install the Gingerbreak and root device.
Install the RootCheker and check the root.
Instructions taken from here: http://www.chinadigitalcomm.com/haipad-m8-vimicro-vc882-t10830.html
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Can you try to install the attached package and see how it goes. Just confirm you want to replace the existing version. It worked for me.
mounesh25 said:
I've updated the firmware successfully.
But now I have a new issue with the USB OTG. I cannot use the USB OTG control to change from host mode to device mode. Everytime I try to go and click on USB OTG control, it throws error "the application USB OTG (com....) has stopped unexpectedly". Ive tried to reset to factory defaults...but now seems the problem is still stuck there. I cannot go into ADB to do the rooting without enabling the 'device' mode connection for the USB. pl help.
Ive googled but none of the solutions seem to be working.
Click to expand...
Click to collapse
Go to system/app
find usbcontrol.apk
install it
you get a fault (not installed)
after that it works agian
hey!
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
czy86 said:
I found this:
blog.mcbub.com/index.php/tablet-pc/10-2-zenithink-c91-android-4-0-firmware-update-guide-beta-version
Do you think it would work on superpad? Because in guess that zenithink is kind of same thing like superpad m I wrong?
Click to expand...
Click to collapse
I don't know but would be nice!
i feel useless... after i run the batch file from the extracted motochopper folder, it starts in terminal and says not found followed by daemon started and nothing happens.. i checked usb debug and the unknown source security boxes on the tablet and since im running windows 7, i ran the batch file as administrator. please anything will help kind of afraid to pull usb cable out of laptop what do i do now??
beahrr77 said:
i feel useless... after i run the batch file from the extracted motochopper folder, it starts in terminal and says not found followed by daemon started and nothing happens.. i checked usb debug and the unknown source security boxes on the tablet and since im running windows 7, i ran the batch file as administrator. please anything will help kind of afraid to pull usb cable out of laptop what do i do now??
Click to expand...
Click to collapse
Sounds like your ADB is not working. Can you connect to your device thru ADB from a PC?
Code:
adb devices
Should echo your S/N. If it says "List of devices attached" followed by blank (nothing) then your ADB is not working and you need drivers for W7, W8. You also have to add the path to platform tools to your Windows system environment variables path so the system can find it.
Code:
which adb
Should echo "/system/bin/adb" otherwise you don't have the adb binary installed on your device.
Code:
adb version
Should echo 1.0.29 for 4.1.1
Should echo 1.0.30 or 1.0.31 for 4.2.1 (secure adb)
elfaure said:
Sounds like your ADB is not working. Can you connect to your device thru ADB from a PC?
Code:
adb devices
Should echo your S/N. If it says "List of devices attached" followed by blank (nothing) then your ADB is not working and you need drivers for W7, W8. You also have to add the path to platform tools to your Windows system environment variables path so the system can find it.
Code:
which adb
Should echo "/system/bin/adb" otherwise you don't have the adb binary installed on your device.
Code:
adb version
Should echo 1.0.29 for 4.1.1
Should echo 1.0.30 or 1.0.31 for 4.2.1 (secure adb)
Click to expand...
Click to collapse
Thanks man, btw how do you thank on here to make ur thank meter grow
I ran into the same problem with win7. When I plugged in my tablet, it seemed like it would lose the connection shortly after connecting it. I eventually got it to root by running motochopper, and then plugging in my tablet. This was the only thing that worked, even after installing every Asus USB driver know lol.
Hope this helps
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
I cant able to use the adb. It's not listing my mobile.
Even though, I've enabled my USB Debugging, It's not listing my device.
Last day it worked well.
Any idea guys? I'm still struggling with this problem.
That's problem in the driver and the custom ROM. I myself solved he problem.
Well
swordfish said:
Well
Click to expand...
Click to collapse
if device is not shown in adb then there will be some possibilties like
you haven't properly installed the driver or older version of drivers
or you haven't have all the binaries files to run adb command
or previous adb server was not killed
to prevent that
install updated drivers,check whether you have all binary files
and for killing adb server try these commands
adb kill-server
adb start-server
adb devices
hit thanks if helped
so im trying to get into adb shell on my device. i have twrp 2.5.0.0 installed and when hooked up to my pc the "adb devices" command shows nothing. the reason im trying to use the adb shell through twrp is because im pretty sure i have some file system corruption and want to run e2fsck to fix it. ive tried unplugging the device from my pc, killing the adb server, restarting it, and plugging my device back in. im running windows 7 ultimate 64bit on my pc with the asus drivers. what can i do to either get into adb shell through twrp or fix my filesystem another way? im in dire need of some help
alb-o said:
so im trying to get into adb shell on my device. i have twrp 2.5.0.0 installed and when hooked up to my pc the "adb devices" command shows nothing. the reason im trying to use the adb shell through twrp is because im pretty sure i have some file system corruption and want to run e2fsck to fix it. ive tried unplugging the device from my pc, killing the adb server, restarting it, and plugging my device back in. im running windows 7 ultimate 64bit on my pc with the asus drivers. what can i do to either get into adb shell through twrp or fix my filesystem another way? im in dire need of some help
Click to expand...
Click to collapse
You can run commands directly from twrp terminal and there is no difference between adb shell and terminal on the tablet.
My problem is my tablet is visible in normal mode on my pc. Bootloader 4.2.1, The Device is unlocked ok. adb devices: #serie ok, and adb reboot-bootloader function works. The tablet will reboot into fastboot mode, but I am unable to find a driver that works on my pc. I installed 1.97 pc asus sync, google sdk, minimal adb fasboot driver, all indicates error code 10
"fastboot devices" does not work. Rck is on and the icon does not flashes, the fastboot reboot feature is '' Waiting for device ". So if I disconnect and reconnect the USB cable, the tablet will restart on the OS...
Even tried with a live linux cd and still the same problem...
Note my usb cable has been replaced by a generic for my original cable had become unstable.
It can be the cause of my problem. Of course I tested with 2 cables? Factory reset and unlocke with v7 and v8 apk, and also an OEM recovery to latest firmware 10.6.1.27.5-20130902
I would like to set up a recovery to try others Roms,
Thanks for your help.
cyborg3691 said:
I would like to set up a recovery to try others Roms,
Click to expand...
Click to collapse
First of all, your boot loader must end with 27.5. Check it out when you are unsure before you do anything more.
Then try to flash Kang TWRP from your SD Card with Terminal Emulator using the following code:
dd if=/sdcard/ twrp_tf300t_kang_2.8.7.2.img of=/dev/block/mmcblk0p4
For more information have a look at Josh’s thread http://forum.xda-developers.com/transformer-tf300t/development/recovery-twrp-t3046479
For this soluce the tablet need to be root...
I have make this but not working, the terminal not see the file on sd card....
On terminal i see
[email protected]:/ $ su
[email protected]:/ # dd if=/sdcard/foo.img of=/dev/block/mmcblk0p4
/sdcard/foo.img cannot open for read: no such file or directory
1 [email protected]:/ #
help me
SOLUCE With another computer...
My problem was my computer z87 motherboard with incompatible usb port? I try front and rear usb ports,
with a generic usb cable, I have solutioned this problem, with a other old computer and minimal adb fastboot v. 1.3.1 with a netbook msi wind u100 runing xp and now, tf300t was detected in adb and fastboot mode the command devices works fine. I intall twrp and intall and try another rom.
Thanks for your help.