Related
Hello,
I just try this on my Asus Transformer and it seem to make a big different on the tablet smoothness.
Before when I either wake up the TF or running allot of program, it would lag allot. After the ram tweak, I can said it does make a different. Even after I had almost fill my memory up to 90%, opening new programs and swapping screen is fast. Android does a decent amount of work and return my memory back to 150 (and up) with the OOM Kill task. It did not cure my SOD problem.
I am current running the ram optimization with no other ram optimizer or task killer.
Here my TF configuration:
Prime 1.5, Netformer 1.5 @ 1.5GHZ, SD Boost, and Script Ram Optimization. The link is below. Check it out and let me know how it goes on your transformer. As always, make a nano backup before the tweak.
Credit goes to Juwe11
http://forum.xda-developers.com/showthread.php?t=1111145&highlight=ram
Hi, if you're running prime 1.5 it has support for sysctl changes built in. By using /system/etc/sysctl.conf_default as a guide, simply put the desired settings into the /system/etc/sysctl.conf file and these will be applied on reboot by the 04sysctl init.d script that's already in the rom.
Or just use the script for the post above, it should work fine too.
nice work !
By the way, what is SD Boost?
can i use this tweak with the netformer kernel and stock rom?
amerikian said:
By the way, what is SD Boost?
Click to expand...
Click to collapse
The default settings for I/O is really slow when it comes to SD r/w. With SD Boost app on market, it'll tweak the I/O parameters on boot. If you're running Prime, then it is already tweaked for you and is permanent.
frosty5689 said:
The default settings for I/O is really slow when it comes to SD r/w. With SD Boost app on market, it'll tweak the I/O parameters on boot. If you're running Prime, then it is already tweaked for you and is permanent.
Click to expand...
Click to collapse
But those files can be applied on stock rom with root and Kernel netformer 1.5 or i can fall in some issue if i don't have prime 1.5 installed into TF?
devilpera64 said:
But those files can be applied on stock rom with root and Kernel netformer 1.5 or i can fall in some issue if i don't have prime 1.5 installed into TF?
Click to expand...
Click to collapse
Apps like that or SD Speed Increase should be fine with just a rooted device at minimum.
jonitfcfan said:
Apps like that or SD Speed Increase should be fine with just a rooted device at minimum.
Click to expand...
Click to collapse
and the RAM tweak? if i apply it with CWM on the stock rom (as i have done with wpa_supplicant to turn on Ad-Hoc connections) it's ok or i can have issues?
Here is what Roach2010 already has in the kernel by default:
[taken from the /system/etc/sysctl.conf_default file in PRIME v1.5]
NOTE: only the values that relate to what is in the script that the OP links to
Code:
vm.dirty_background_ratio = 5
vm.dirty_ratio = 20
vm.dirty_writeback_centisecs = 500
vm.dirty_expire_centisecs = 200
vm.swappiness = 60
vm.vfs_cache_pressure = 100
Here are the values to place into the /system/etc/sysctl.conf file that Roach2010 mentions above:
NOTE: these are the replaced values that relate to the script the OP links to
Code:
vm.dirty_background_ratio = 5
vm.dirty_ratio = 90
vm.dirty_writeback_centisecs = 1000
vm.dirty_expire_centisecs = 500
vm.swappiness = 50
vm.vfs_cache_pressure = 10
Looks to be similar to this app => https://market.android.com/details?id=com.rs.autokiller&feature=search_result
Roach2010 said:
Hi, if you're running prime 1.5 it has support for sysctl changes built in. By using /system/etc/sysctl.conf_default as a guide, simply put the desired settings into the /system/etc/sysctl.conf file and these will be applied on reboot by the 04sysctl init.d script that's already in the rom.
Or just use the script for the post above, it should work fine too.
Click to expand...
Click to collapse
Canny figure oot if yer sayin this is gonny help oor no?
I'm running Prime 1.5 and clemsys kernel v14b.
Globespy said:
Canny figure oot if yer sayin this is gonny help oor no?
I'm running Prime 1.5 and clemsys kernel v14b.
Click to expand...
Click to collapse
Everything about how much "snappier" it becomes is subjective.
frosty5689 said:
Everything about how much "snappier" it becomes is subjective.
Click to expand...
Click to collapse
Cheers. I guess it falls in the same basket as autokiller etc. Highly debatable subjects.
Just from my experience. When I have using the TF for 4 hours, I would have use over 10 programs. opening the android market up would take at least ten seconds or more. With the ram tweak, it open up in two seconds.
Opening all other programs there after are just as quick, as if you first start up the Transformer. Switching from screen to screen is very smooth. Where with out the tweak it would lag for a few seconds if I have allot of programs running.
My experience with the tweak vastly improve the usability of the tablet. Then again, it is subjective.
Did not know Prime 1.5 already have the SD Boost tweak? Can anyone recommend me a SD Card benchmark tools that can work on the microsd, SD, and internal storage? Been looking on the market, but not that work for all the storage slots in one tools.
Thanks
I am using the Clemsyn version 16 kernel. Can I use the CWM RAM Script?
Thanks a lot
I don't see why not. OC does help with loading up the program faster and durning usage. The ram tweak help with the multitasking part. It use subjective though.
Do a backup before tweaking it.
minhgi said:
I don't see why not. OC does help with loading up the program faster and durning usage. The ram tweak help with the multitasking part. It use subjective though.
Do a backup before tweaking it.
Click to expand...
Click to collapse
would a complete nandroid be necessary or could we just backup the files it alters?
adiliyo said:
would a complete nandroid be necessary or could we just backup the files it alters?
Click to expand...
Click to collapse
A complete nandroid backup would a safer bet in this instance, or any other instance for that matter, in case you can't boot into your TF for whatever reason. It'll also be more convenient than having to find out which exact files are being modified and to use a root file manager to manually copy and paste the current versions before flashing.
It seemed to help me on my tf. Surprisingly I didn't have anything in my sysctl.conf before I added this in.
brando56894 said:
It seemed tohelp me on my tf. Surprisingly I didn't have anything in my sysctl.conference before I added this in.
Click to expand...
Click to collapse
Same here...I don't have any sysctl.conf on my Asus..
I have asus eee transformer with kernel netformer 1.5 @1,5 ghz and prime 1.4 but after a succesfull flash wirh cwm i don't see the file in the folder and with the other metod i can't change permissions with root explorer, what have to do?*
hello, i decided to make guide and also to tell peoples more about this great scripts.
all thanks goes to zeppelinrox!!!!!
original thread http://forum.xda-developers.com/showthread.php?t=991276
a bit messy, thats why i decide to make guide , so peoples are not scared when see wall of text
for past few weeks i was testing all possible scripts , lagfreev1 , v3 , tweakzv5 , allinone , sick etc.
and to be honest, its bull****, all what those scripts give are placebo efects. they dont eaven have proper premissions to run, meaning they do nothing .
script to work must have rwe re re , or all cheched .!!! not rw r r
Now back to theme .
V6 supercharger + kak is only script that i noticed that work evry reboot, and actualy do what it says.!!
how to install :
u need to have busybox version 1.18.2 , download from market busybox installer, chose version 1.18.2 and install
second u need to have script manager , download for market .
steps :
1. when u run script manager, chose browse as root!!
Press MENU then MORE and Advance Options then Config. CHECK Browser as root and press back.
2. find script in sd card. press on it, chose green buton skulls and bones aka superuser . NOT RUN AS BOOT!! when its green, press RUN
3. now u are asked if u wana BUILD.prop or LOCAL.prop . LOCAL.prop is safer but i had problems reaching 100% supercharged that way, so i evrytime run BUILD.prop , there is no risk, becouse script make backup automaticaly!
4. now script ask if your launcher is locked to memory , IT SHOULDNT BE , but u can change that later , just press what u have yes or no
5. now in driver options u press 1, to check your status , there will be sugestions of how to chose , supercharge lvl etc,
6. afther that u press 10 , You are given the minfrees values of "6, 8, 30, 36, 41, 47". If the values are like this. Then press Yes.
7. now follow what script says, it will put your launcher as hard to kill or Die hard , set minefree vaules and suggest u to restart phone, since this is your first time, u should chose superclean and reebot, so it delete your dalvik and u have fresh phone!
8. afther reboot run script again from sd card folder , u should be 100% supercharged and launcher hard to kill or die hard . if not , chose re
supercharge
9. if 100% u can chose Nitro Lag Nullifer , it will make phone eaven smoother option 20.
10. now chose option 18 . the Engine Flush. It will flash your RAM but not like the Task Manager where it closes your application or it will close your 3rd Party Keyboard and etc. This ENGINE FLUSH is a good way if u experience lag but you have still an ample amount of RAM. In short, you can make a habit of this to run anytime you experience LAG.
11. pick option 31 to stop script
11. NOW IMPORTANT THING FOR STOCK ROMS . u can run this script BUT u have to be rooted. AND u have to go in script manager to folder data/99supercharger.sh. Press on it , and chose options run as root (green) and run as boot (blue)
12. Custom roms dont do that becouse script is in init.d folder , witch execute script automaticaly.
Now reboot again and run script again from sd card , one that u run first time, to make sure that evrything is ok.
if u are supercharged 100%, launcher die hard or hard to kill u are good!!
thats about v6 supercharger
now for kickasskernelizer aka KAK
same procedure , run script from sd card, press green icon, run
follow options , press yess to all, and let script modify i/o shedulers also
now is preferable to run sio sheduler , u will see in script .
sio is bad for benchmarks dont worry. chose deadline and see big numbers
enjoy your supersmoother and optimized phone, stock phones will GREATLY PROFIT FROM THIS, cm7.2 can feel longer battery life!!
DOWNLOADS :
DOWNLOAD LINKS WORKS, these are not files, but pdf scripts, where u have to remove .pdf extension when downloaded!!!!!
press right click, save as , when downloaded, remove .pdf
i use v6supercharger update 9 rc6.9 . witch is in beta, but working flawless!!!
most recent updates follow here
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Also CM9
(gets more battery life) ????
no mate, this versiion is only for gb based os , for ics aka cm 9 there is some other way , witch can be found on post number 2 of original thread, didnt go deep into it so i cant say how it works or how to make it work
djozaa said:
no mate, this versiion is only for gb based os , for ics aka cm 9 there is some other way , witch can be found on post number 2 of original thread, didnt go deep into it so i cant say how it works or how to make it work
Click to expand...
Click to collapse
So give me a tuturial i dont know anything about it
THE DOWNLOAD LINKS WONT WORK
to download press right click and save as.
then delete .pdf
this is only for gb and cm 7
didnt use myself cm9 so i am not writeing turt. about it
Sent from my GT-S5670 using Tapatalk
djozaa said:
to download press right click and save as.
then delete .pdf
this is only for gb and cm 7
didnt use myself cm9 so i am not writeing turt. about it
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
does it work with creeds rom 2.0/2.5
yes with any custom, stock and cm7 gingerbread rom
tho having lagfree , tweakz or something scripts is not good, since this one do it better. but anyway, those scripts dont eaven have right premissions to work evry boot so is not big deal. but yea, best would be without it
djozaa said:
tho having lagfree , tweakz or something scripts is not good, since this one do it better. but anyway, those scripts dont eaven have right premissions to work evry boot so is not big deal. but yea, best would be without it
Click to expand...
Click to collapse
its sais no such file or directory -.- ...
errors:
line1: syntax error near unexpected token ´newline´
line1: ´<?xml version="1.0" encoding="iso-8859-1"?>
Thank you man works great for me
Sent from my GT-S5670L using xda premium
n00b.androidDEV said:
its sais no such file or directory -.- ...
errors:
line1: syntax error near unexpected token ´newline´
line1: ´<?xml version="1.0" encoding="iso-8859-1"?>
Click to expand...
Click to collapse
Incomplete download...
Yes you can get the die-hard launcher on ICS/CM9 with a patched services.jar.
I give detailed instructions on how to do it.
People are having quite a lot of fun doing it themselves and learning a thing or 2
But there are a few CM9 services.jars which should work.
Every CM9 services.jar that I've tried has worked on my device running CM9 for milestone.
So should i remove lagfree, ramscript allinone etc scripts from init.d folder before installing these??
yes . only s ript i use with these is to put my sd card chache 2048 and ungaze.
Sent from my GT-S5670 using Tapatalk
djozaa said:
yes . only s ript i use with these is to put my sd card chache 2048 and ungaze.
Sent from my GT-S5670 using Tapatalk
Click to expand...
Click to collapse
Hey can u tell me which script did u use for sd card cache increase..in cm7.2 rc5.5 with ics there are 2 or 3 scripts for sd card..plz tell me which one should i remove???????
i guess u use cm7 combined by asad007 , then u should remove all those scripts , and leave only cm7 stock ones, witch are
00banner , 01sysctl , 03firstboot, 04modules, 05mountsd , 06mountdl , 20userinit.
working scripts are easy to see since they have all premissionss checked!! others have rw r r and they do nothing but mess system.
also dont delete ungaze script or a2sd or watewer u use for sd ext partition.
about sd card chache i use simple script from here, i chose 2048 one http://forum.xda-developers.com/showthread.php?t=1010807 , make sure it have all premissions checked when in your init.d
Thats rght i use the modified cm7..so i should remove everything xcpt those scripts..now i wil give a shot
its not really modified. only have extra scripts in. just make sure u leave those scripts above and for ungaze or a2sd or watever u use for sd ext storage.
Sent from my GT-S5670 using Tapatalk
OMG i cant believe its really working..now my phone's just flying..many thanks to the script maker as well as the uploader too
heheh
Sent from my GT-S5670 using Tapatalk
thanks, will try this after i'm done with my studies
when i press the script, press su button and then run and it say "Syntax Error : newline unexpected
help please?
i have open optimus rom , i use it for a long time, after a clean reinstall and several apps i keep getting this problem:
cpu 100% , i checked the pico TTS (solved) then it reappeard after some time and i can`t make it run less than 100% only if i unmount the sd card.
i mounted another sd card (from my camera with no apps installed) and still 100% .. now i use my phone as a nokia 3310 only to call and text because i can`t use SD card at all..
what can i do ?
i`m sick of flashing everythng again and arrange my icons and make it as i am used to it bla bla...
Get an app from play store to see CPU usage. learn what actually causes CPU spike. and please specify the rom u are using
Souron29 said:
Get an app from play store to see CPU usage. learn what actually causes CPU spike. and please specify the rom u are using
Click to expand...
Click to collapse
i see the cupu usage with quick system info and the statusbar icon shows 100% but in aplications that are running all is fine.
i konw it`s 100% because of batterylife and stuff....
i am using OpenOptimus 2.2 or something (the updated one by ciaox) i think i`s a good Rom, this new ones all have bugs, i don`t want bugs to limit me for the sake of "fashion"
today i did factory reset twice and it doesent start up properly (i cant use it) i have to flash new ROM anyway
Hi Guys,
Here i present a Work in progress Guide(cause i'm constantly learning and evolving this guide as a result) on the best settings for the supercharger v6 script to achieve the most out of your rom.
Prerequisites:
>Android device with 280mb user accessible ram(sorry but currently these are the devices targeted).
>Root acess, script manager and init.d support(tested on cm7 will work on both stock and cm roms).
>A usable brain.
>Common Sense
>a will to experiment
>not being an Ass and helping here if you can.
>Crossbreeder
>Supercharger script
Thread Map :
Post #2 : Supercharging and crossbreeder co usage.
Post #3 : Some more supercharging.(experimental)
Post #4 : Sysctl.conf tweaks for a better battery life(experimental)
Post #5 : Credits.
NOTE : attached to this post is a zipalign binary if your rom doesnt have it(look in /system/bin and /system/xbin) then extract binary from rar file and move it to /system/bin and give permission 0755(rwx,r-x,r-x)
how to do via adb
Code:
adb push zipalign /system/bin/
adb shell
chmod 0755 /system/bin/zipalign
Supercharger and Cross-breeder co-usage.
Supercharger CrossBreeder Combo:-- Yes This will help provide a boost.(this is an alternate to Activo Speeder,Adrenaline engine+boost)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Q.Now you guys ask me why to use crossbreeder along with supercharger ?
Ans.Crossbreeder is an entropy generator(faster refreshing & movements generation in apps) along with dnsmasq cached dns requests(speeds the net)It does nothing where the ram is concerned(and ram is a scarce resource).Here's where Supercharger comes in the combination of min-frees , and fast engine flush(its like an automated adrenaline boost!)allows for much better user experience.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
How to patch service.jar Guide below
your service.jar is not patched(otherwise oom groupings would be fixed and launcher patched only for ics and above).
you are using windows download this zip(yes its a zip) extract its contents to a folder.
now connect your device to the computer(enable usb debugging and allow root permission for adb and apps).
now from the folder you extracted the Ultimate jar power tools to click on ultimate_jar_patcher_adb.bat
while running since you have connected your phone and enabled all settings as mentioned choose live mode.
If you face any problems upload your service.jar here and I'll patch it.
Note : - the service.jar doesn't need to be patched for 2.3 or 2.2 as the values are written & read from build.prop or local.prop(preference to build.prop).
now lets begin.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CrossBreeder in recovery its a flash-able zip.
now for the interesting part cross-breeder has certain parts of supercharger in it.Mainly Kernel Mods(KAK)
so in supercharger I'm sure you know how to use it if no here's a small guide.
Guide
install an app called script manager(available in the play-store).
inside the app your first prompt will have an option of browse as root choose it(gets highlighted as blue)and click OK
now navigate to where the downloaded script is located and click on it.
on the top corner there should be an icon of superuser (skull with cross bones) click it and the n click run
now you are running the script....
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
now I wont help you with each and every aspect here(Its actually very simple if confused ask).
main point is to accept nearly everything when asked
a few exceptions are.
if you have zip align is any other script like int2ext then choose to disable boot align and zip align and only enable fix emissions.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
launcher strength = die-hard
Note :don't lock home in memory.
min-frees Settings this is your ram manager :
The setting are not available for 384mb devices(like us) so after a lot of trial and error I found the best working categorization they are as follows :-
Old Settings:
for people who like to have a smooth lag-free experience in their current app BUT no multitasking choose balanced(512hp) categorized by me as aggressive.(option 6)
for people who like limited multitasking along with a fairly lag-free experience choose Quick v6 cust-OOMizer. Categorized by me as balanced. (option 10).
for people who like a large amount of apps open simultaneously and don't mid as many apps open choose 256hp balanced categorized by me as Multitasking (option 3).
a good guide to understand min-free settings and OOM is this
Note : disable zram(comp-cache).
Note : disable lock launcher in memory.
now when prompted for kernel strength choose default(thus no conflict with crossbreeder).
Detailing (helps use it).
for detailing choose every 4th boot.
Some Moarh Supercharging(Experimental).
New Settings: (only for people who know what they are doing).
These are custom minfree values that can be entered from option 10(custOOMize) and not enabling minfree calculator values.
they are still experimental.
Code:
8,12,30,36,41,47----Balanced(same as minfree calculator).
8,12,33,39,44,50----Aggressive
8,12,24,30,35,41----Multitasking
Fast-Engine Flush
for fast engine flush(its kind of like adrenaline boost hell its the same). choose every 6hrs(its automatic wont even know its there) recommended for gb or froyo roms....still lagging choose every 3hrs or recommended is 6 hrs.
NOTE FOR GAMERS
enable fast engine flush every . hrs this will remove cached apps every 6mins allowing for free ram i.e a fast and generally lagfree experience though i recommend to change back to 6hrs once game finishes.
this should allow for a fast and smooth performance with no loss of life.
Thanks and Happy Flashing.
Sysctl.conf tweaks for a better battery life(Highly Experimental)
Attached is a sysctl.conf file that should be placed in /system/etc/<here>(first unzip it) with permission rw-,r--,r-- or 0644
also if you are on a rom other than cm7 then also place in /system/etc/init.d/<here> file 01sysctl(first unzip it) and permission 0755 or rwx,r-x,r-x
these are certain tweaks for the kernel that are executed at boot time and supose to help improve the battery life as stated experimental.
Risk:
Lower battery life ,lag.
for those who want to see the sysctl tweaks here they are.
HTML:
vm.drop_caches=3
vm.oom_kill_allocating_task=0
vm.panic_on_oom=0
vm.dirty_background_ratio=70
vm.dirty_ratio=90
vm.vfs_cache_pressure=10
vm.overcommit_memory=1
vm.min_free_order_shift=4
vm.laptop_mode=0
vm.block_dump=0
vm.oom_dump_tasks=1
vm.swappiness=60
vm.dirty_writeback_centisecs=500
vm.dirty_expire_centisecs=250
vm.min_free_kbytes=4096
fs.file-max=524288
fs.inotify.max_queued_events=32000
fs.inotify.max_user_instances=256
fs.inotify.max_user_watches=10240
fs.lease-break-time=10
kernel.msgmax=65536
kernel.msgmni=2048
kernel.panic=10
kernel.random.read_wakeup_threshold=128
kernel.random.write_wakeup_threshold=256
kernel.sem='500 512000 64 2048'
kernel.shmmax=268435456
kernel.threads-max=524288
net.core.rmem_max=524288
net.core.wmem_max=524288
net.ipv4.tcp_rmem='6144 87380 524288'
net.ipv4.tcp_wmem='6144 87380 524288'
net.ipv4.tcp_timestamps=0
net.ipv4.tcp_sack=1
net.ipv4.tcp_congestion_control=cubic
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_tw_recycle=1
net.ipv4.tcp_tw_reuse=1
Credits
Zepelinrox(Supercharger creater)
Hero(sysctl.conf guy)
idcrisis(crossbreeder developer)
Dark Passenger(Guide maker)
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
ZmisiS said:
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
Click to expand...
Click to collapse
Install V6, install crossbreeder done
ZmisiS said:
@ Dark Passenger
I don't understand nothing. What need install? If all, I think it is much. It is too tangled for me.
Click to expand...
Click to collapse
Its a guide to know which settings to configure in Supercharger v6 script so as to get the best performance.
So to install you need the supercharger script.
swat4samp said:
Install V6, install crossbreeder done
Click to expand...
Click to collapse
actually i found supercharger entropy enlarger is better than crossbreeder(doesnt get killed easily and better scaling).
Dark Passenger said:
Its a guide to know which settings to configure in Supercharger v6 script so as to get the best performance.
So to install you need the supercharger script.
actually i found supercharger entropy enlarger is better than crossbreeder(doesnt get killed easily and better scaling).
Click to expand...
Click to collapse
But i observed battey drain with supercharger's entropy generator..thats the reason i am using crossbreeder (well honestly i dunno whether its getting killed or not)..so ur suggestion is to use supercharger's entropy??I will have a go once again..
swat4samp said:
But i observed battey drain with supercharger's entropy generator..thats the reason i am using crossbreeder (well honestly i dunno whether its getting killed or not)..so ur suggestion is to use supercharger's entropy??I will have a go once again..
Click to expand...
Click to collapse
most likely the drain is because the entropy enlarger runs through out rather than only when device is awake.Dunno about now but the battery is okay for me works a day and a half with generally medium usage.
if crossbreeder works for you go for it.
also about battery try the sysctl.conf tweaks they cause a battery drain of 1% in 6 hrs.Litterally seems as if the percentage meter was faulty. though this was during device sleeping with mobile data and sync on.
Bro is it good for cm7 too? Means is it beneficial to cm7 too? I think yes but what about services.jar patching of mini cm7 or official cm7?
Where to find zipalign binary for cm10...?
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Raj joshi said:
Bro is it good for cm7 too? Means is it beneficial to cm7 too? I think yes but what about services.jar patching of mini cm7 or official cm7?
Click to expand...
Click to collapse
Yes am using it currently in official cm7.(the main benefit is if you use an app2sd script and with a gazillion apps).
JatinSoni said:
Where to find zipalign binary for cm10...?
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
attaching to first post please wait.
EDIT attached along with how to give permission and copy via adb.
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
JatinSoni said:
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1241890&d=1344115573
unzip it and open sqlite3+zipalign_installer_v6.sh with script manager. it will automatically install zipalagn binary .
JatinSoni said:
I download zipalign & paste it to system/ bin & x bin....give it proper permission but still problem as it is.
Sent from my GT-S5670 using Xparent Cyan Tapatalk 2
Click to expand...
Click to collapse
only in bin not both bin and xbin.
ehsan-black said:
download this :
http://forum.xda-developers.com/attachment.php?attachmentid=1241890&d=1344115573
unzip it and open sqlite3+zipalign_installer_v6.sh with script manager. it will automatically install zipalagn binary .
Click to expand...
Click to collapse
Is this complete program? Need more something install?
ZmisiS said:
Is this complete program? Need more something install?
Click to expand...
Click to collapse
yes. it's complete. just Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit.and open zipalign script with script manager
ehsan-black said:
yes. it's complete. just Extract the zip to the root of the sdcard and it will all be in /sdcard/SuperCharger_Starter_Kit.and open zipalign script with script manager
Click to expand...
Click to collapse
I tried with Script Manager and I got notification that I run it with root and that I tray again. I opened Script Manager and click Allow for root, but problem is same. Font size in Script Manager is so smal.
ZmisiS said:
I tried with Script Manager and I got notification that I run it with root and that I tray again. I opened Script Manager and click Allow for root, but problem is same. Font size in Script Manager is so smal.
Click to expand...
Click to collapse
did you hit Skull and Bones icon?!!
This L SPEED IS MADE By. #PAGET96
#MALTONATOR
For more details and downloads go to http://forum.xda-developers.com/showthread.php?p=58598266
L Speed is a mod that combines some scripts and little tweaks in one package which is aimed to improve performance, reduce lags and expand battery life.
Originally developed for the LG L Series and Nokia X2, now this mod is expanded and modified accordingly to run on any device!
This mod will work on any device.
All you need to ensure is that your phone is running Android!
It will work from Android 2.3 (Gingerbread) to Android 6.0 (Marshmallow)
DO NOT USE THIS MOD WITH OTHER MOD, CLEAN UP YOUR init.d FOLDER BEFORE FLASHING!
If you're updating from previous versions, you don't need to do anything, the script will do everything automatically
User friendly (clear menu in Terminal Emulator)
Less RAM usage through zipalign
Better Performance
Less lags with LMK Tweak and various VM Tweaks
Faster SDCARD Read/Write speed
Cleaner script for cleaning system
Better battery life
CPU tuner
Battery calibration
Seeder
Kernel tweaks
FS Trim
No more ads, host file updated
How to clean up init.d
Use a root explorer as File Explorer)
* go to root directory ( / )
* navigate to /system/etc/init.d
* Open init.d folder
* Delete all files from other mods (e.g. zipalign, sqlite, setpermissions, System tweaks, etc.)
* Done! Optionally, do a reboot for safety measure
Requirements
* Root Access
* init.d support (Users without init.d just flash the mod, but SuperSU is needed)
* Custom Recovery (such as CWM or TWRP)
- Mod will not be properly flashed on some device with TWRP because the recovery doesn't have /tmp folder
* Minimal ~10MB free space on system partition
How to install:
Before flashing please take a backup to avoid any incompatibility issues. (Just in case)
1. Change SElinux to permissive*IMPORTANT* (but no need for Nokia x2 because we already have it)
3. Reboot into recovery mode
4. Flash zip file
5. Reboot
6. Profit!
L Speed menu: (check script, L Speed Wizard, changelogs, uninstall)
Download Terminal Emulator from Play Store
Open it and type:
su
LS
You can BOOST your device directly from teriminal emulator
Thanks to
*@Paget32
XDAevDB Information
L SPEED, Tool/Utility for the Android General
Contributors
Yasat nokiax2,Paget96, skyinfo, F4uzan, aidasaidas75
Source Code: https://github.com/Paget96/L_SPEED.git
Version Information
Status: Stable
Stable Release Date: 2015-09-18
Created 2015-02-11
Last Updated 2015-09-18
What's this? There is already a thread for l speed.
Yes, but not in Nokia x2.☺
Sent from my ara
There is no thread for l speed for a certain device because it's made for all devices.
Totally time pass mod....i tried in cm11 no speed improvement i think i makes my phn more laggy now
Same problem.....
please use wisely guys. it works fine for me
yasat nokiax2 said:
please use wisely guys. it works fine for me
Click to expand...
Click to collapse
It performs good but not too good.....in cm11 before install l speed scroll lags and also after install this prblm occurs.....no chng
@yasat nokiax2 what exacktly to download from the zips because there is a lot?
https://www.androidfilehost.com/?fid=24269982086995056
Try that @Ahmed X
its laggy.. **** -_-
sonic.exp said:
its laggy.. **** -_-
Click to expand...
Click to collapse
Hey bro, can you please let me know which settings you used. Sol that we can solve that lag. Thank you!
@yasat nokiax2 bro......after flash play store sometime my phn gets leggy but after lock the screen and on its runs smooth how to solve......?
Pawan987 said:
@yasat nokiax2 bro......after flash play store sometime my phn gets leggy but after lock the screen and on its runs smooth how to solve......?
Click to expand...
Click to collapse
Hmm. Do you have good storage bro. I mean like >600mb internal storage?
yasat nokiax2 said:
Hmm. Do you have good storage bro. I mean like >600mb internal storage?
Click to expand...
Click to collapse
Yes i have
And what about mem card?
If you have more that 1gb in your mem. Card then download a app called ram expander from browser since its paid app. Open it and swap your wish in your mem. Card. Don't forget to keep 100% swappiness and autorun on. After completed reboot your device.
yasat nokiax2 said:
And what about mem card?
Click to expand...
Click to collapse
Yes mem crd also has 2-3gb free space
---------- Post added at 05:58 PM ---------- Previous post was at 05:55 PM ----------
yasat nokiax2 said:
If you have more that 1gb in your mem. Card then download a app called ram expander from browser since its paid app. Open it and swap your wish in your mem. Card. Don't forget to keep 100% swappiness and autorun on. After completed reboot your device.
Click to expand...
Click to collapse
I will try....thanks bro for help
Why y bee deleted all things...what happened??yasat
Pawan987 said:
Yes mem crd also has 2-3gb free space
Click to expand...
Click to collapse
Yeah try that . it may work. Let's me know the result bro