Related
For a few weeks im trying to use mobile odin to install ics on my tab but when i open mobile odin it doesnt work it told to my these.
Device no compatible or not recogniced check root
Or do you want to make a dump file these may help to make your device compatible.
I do this all the time but norhing helps me im a rooted us:crying:er but it doesnt work please someone that helps me quickly:crying:
darkangel05 said:
For a few weeks im trying to use mobile odin to install ics on my tab but when i open mobile odin it doesnt work it told to my these.
Device no compatible or not recogniced check root
Or do you want to make a dump file these may help to make your device compatible.
I do this all the time but norhing helps me im a rooted us:crying:er but it doesnt work please someone that helps me quickly:crying:
Click to expand...
Click to collapse
I feel for you - I had same problem, which I was never able to solve - if it's any consolation, the ICS update has fixed it, which I installed with desktop odin.
Yeah but my problem is that i came to a little town in colombia for vacations (there is so hot girls in this contry) :good
And in this place the electric service is very bad and i had fear that when i am updating my phone the electricity fails and the computer turn off and my phone get bricked
darkangel05 said:
Yeah but my problem is that i came to a little town in colombia for vacations (there is so hot girls in this contry) :good
And in this place the electric service is very bad and i had fear that when i am updating my phone the electricity fails and the computer turn off and my phone get bricked
Click to expand...
Click to collapse
Use a laptop...
Sent from my myTouch 4g via Tapatalk
Use a computer. It won't take more than a minute or two. Worse vase electricity goes out u soft brink ur phone. Plug it back in, boot in download mode. And flash again. And you are done.
Sent from my GT-P6200 using xda premium
Alright my friwn i would try it but you are sure that is soft brick and when i open desktop odin which options i should check and ics got anorher problem? Cause i read that wifi doesnt works
After I up rom trickdoid 7.1 for both version of One S, my phone cant log into normal condition. after a few steps unlock and relock the bootloader, my phone cant operate anything else. I send to repair but it not in the warranty.. I keep send to other place to repair but they say no LCD screen to replace. Now I got my phone back like a black brick. I got no idea to have my phone back in normal condition. any recommend will be appreciate to me. I live in Kingsbury 3083 Victoria Australia.
Does your Htc work? You must flash TrickDroid 1.0.0 for your VilleC2
Sent from my HTC One S using xda premium
oh i didnt see anyone tell that. My one s now is no working any punction. I dont know have to install any rom in this situation
Can you boot to recovery ,
Sent from me
no thing I know. It can not charge or go though the recovery that why I send to repair
If it can't boot at all , generally Its brick bit om not completly clear ön what håppänönc tåöä
Sent from me
maek_it_happen said:
If it can't boot at all , generally Its brick bit om not completly clear ön what håppänönc tåöä
Sent from me
Click to expand...
Click to collapse
I not clear what you mean? I had hear that the Fonebiz told me that 350$ for new main board. But I dont think that is need for my phone cause at that price I can buy another. If someone have any idea or solution please help me.Cause I wait for the repair nearly 6 weeks from now.. It problem happen on 17/8
I'm not sure what you mean , did this happen as a result of you flashing an s4 Rom or did this happen after it was sent for repair ? You have no warranty , I would figure an Aussie would have better command of English , right mate ?
Sent from me
maek_it_happen said:
I'm not sure what you mean , did this happen as a result of you flashing an s4 Rom or did this happen after it was sent for repair ? You have no warranty , I would figure an Aussie would have better command of English , right mate ?
Sent from me
Click to expand...
Click to collapse
Yes I just an international student come to Au for study. it is the result I flash rom trick roid version 7.1( say suitable for s3 and s4). After I cannot do anything after the install rom process I try to lock the bootloader to take repair from the services( hope it work but it not) the phone shut down and no more signal to come normal state
Only trickdroid 1.0.0 is compatible with s3 , there is a separate link for that , if you can boot to recovery just flash that rom , if you can't try to boot to fastboot and reflash a compatible s3 recovery , you will need the compatible s3 twrp recovery ....try this
Sent from me
Thanks for you advise but my phone can not do any things instead a black screen.
Are you able to charge the battery?
none of anything I know work. It like a black stone that all
thienvandac said:
none of anything I know work. It like a black stone that all
Click to expand...
Click to collapse
This sounds like your motherboard is dead. If you have warranty, then I suggest you to take the phone to service and just act dumb . You just make something up, like you were talking and the phone frozen, then you've tried to reboot it, and after that the phone just won't start any more. You've got nothing to loose.
thanks for your suggestion. but I have do it and they know that not in the warranty. they say replace the main board need 350$AUD. that why I take my phone back cause I can buy another just 500$ now. I try to find other solution to this issue here
thienvandac said:
thanks for your suggestion. but I have do it and they know that not in the warranty. they say replace the main board need 350$AUD. that why I take my phone back cause I can buy another just 500$ now. I try to find other solution to this issue here
Click to expand...
Click to collapse
I have encountered a problem before where my battery was totally dead, wouldn't charge nothing. I would plug it into the charger and the orange light would come on to indicate that it was charging but only for a few seconds and then go off again. I'm just wondering if you have the same problem as I know a possible workaround for this.
Thanks for you suggest but I get the problem by bootloader not because the battery( my phone is 1 month new)
Could anyone help me with this problem please
Is there anyone know this??? Please help me
I think it's save to say, that you need a new phone/mainboard for it. I would've read more about the S3 ROMs before flashing anything.
Hello, I just got my new GS3 yesterday. Eager to root and ROM and all the fun stuff. I rooted and unlocked, and used Odin to flash CWM Recovery. Flashed the latest version of Android Revolution HD 16. I wiped cache, dalvik, the whole 9 yards. I did not WIPE boot.img though. Flashed Android Revolution 16, it all went good. Clicked Reboot Phone in CWM Recovery and nothing. No LED light on when plugged into USB or via wall charger. No Download mode, or recovery. Nothing, like nothing at all. Anything you guys suggest?
EDIT: I am not sure if it is Hard Bricked. When I plug it into my PC, it makes a sound. Also tries to install a driver and fails every time.
EDIT2: Okay guys, my fault. Downloaded a ROM that was meant for a different model/type GS3 forum when I have a Verizon GS3 (SCH-1535). Anyone know how to fix this problem? Please disregard this incorrect forum post.
If you flashed anything related to the international S3, Google search J-tag! Or return the device and play dumb...
droidstyle said:
Google search J-tag! Or return the device and play dumb...
Click to expand...
Click to collapse
I am paying for full coverage every month too, and okay, couldn't I also get a Usb JIG to force download mode?
T Greezy said:
I am paying for full coverage every month too, and okay, couldn't I also get a Usb JIG to force download mode?
Click to expand...
Click to collapse
No read my edited post. You most likely hardbricked your device, meaning you no longer have download mode.
droidstyle said:
No read my edited post. You most likely hardbricked your device, meaning you no longer have download mode.
Click to expand...
Click to collapse
Well, I NOW have a red LED on my phone when it is plugged into the PC without battery, sd card, or sim card. Is that a good sign?
T Greezy said:
Well, I NOW have a red LED on my phone when it is plugged into the PC without battery, sd card, or sim card. Is that a good sign?
Click to expand...
Click to collapse
No that verifies what i previously posted.
droidstyle said:
No that verifies what i previously posted.
Click to expand...
Click to collapse
I have faith, thought. I can maybe push something using ADB you think?
You need J-tag.
If there was a way to fix it yourself, nobody on here would worry about bricked phones.
Gotta be super careful and read every single word of a ROM thread and if you aren't sure if it will work for your phone or not, just ask and someone will say either yes or no
Sent from my SCH-I535 using xda app-developers app
josh995 said:
You need J-tag.
If there was a way to fix it yourself, nobody on here would worry about bricked phones.
Gotta be super careful and read every single word of a ROM thread and if you aren't sure if it will work for your phone or not, just ask and someone will say either yes or no
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I guess so. I read something about plugging the phone into the pc without the battery so the red light would come on. Then, you would hold a combination of buttons, and while you're still holding them, put the battery back in while you're still holding them. I guess J-Tag is the only way? Where can I get this? Someone link me. Thanks!
T Greezy said:
I guess so. I read something about plugging the phone into the pc without the battery so the red light would come on. Then, you would hold a combination of buttons, and while you're still holding them, put the battery back in while you're still holding them. I guess J-Tag is the only way? Where can I get this? Someone link me. Thanks!
Click to expand...
Click to collapse
Look like I'm going to drop 60 bucks for a JTAG service? Anyone please stop me if this is not the only way to fix this
email me at [email protected]!
No one is going to stop you. You flashed an international ROM on an s3. This is a known method of hard bricking your s3.
Sent from my SCH-I535 using xda app-developers app
T Greezy said:
Look like I'm going to drop 60 bucks for a JTAG service? Anyone please stop me if this is not the only way to fix this
email me at [email protected]!
Click to expand...
Click to collapse
That sounds about right. Luckily it's $60 and not $600 for a new phone
Sent from my SCH-I535 using xda app-developers app
Same thing happened to me. Needed a j-tag but risked calling Verizon told them my phone wouldn't come on all they asked me was if I damaged it with water or heat. (Either Verizon doesn't care or actually they just scrap the phone) I was rooted and unlocked but flashed the wrong carrier rom. Now I have a replacement phone that cost me $0.
They sent me the 16g and not the 32g by mistake I figured I've pushed my luck enough
Sent from my SCH-I535 using Tapatalk 2
First go to Get.cm download a d2vzw rom. Put it on your sd card. Put the sd card into phone
If you have ADB on your computer do
Code:
adb reboot recovery
You should boot in Clockwork Recovery.
From there flash the D2VZW Rom, Wipe Data,
That should save you.
ericerk said:
First go to Get.cm download a d2vzw rom. Put it on your sd card. Put the sd card into phone
If you have ADB on your computer do
Code:
adb reboot recovery
You should boot in Clockwork Recovery.
From there flash the D2VZW Rom, Wipe Data,
That should save you.
Click to expand...
Click to collapse
How do you figure? How can you adb recovery when the device wont turn on? The device is hardbricked plain and simple...your advice is simply false hope.
I do have a question for the op and the other guy who flashed an international ROM. Were did you get them and how did you find then ( like was it a site you googled?) I've noticed a lot of these lately and am wondering if it's something that can be avoided (besides the obvious read what you're flashing)
To the adb guy there us no recovery on his phone it was overwritten by part of the international ROM. he needs to JTAG his phone, don't call Verizon. You did this to your own phone, pay the 60 and learn your lesson.
Sent from my SGS3 running Eclipse 2.1
droidstyle said:
How do you figure? How can you adb recovery when the device wont turn on? The device is hardbricked plain and simple...your advice is simply false hope.
Click to expand...
Click to collapse
One day someone is going to find a way to unbrick the hard brick, lol. Eventually. Anyways, if it was "dead" then why would it show my S3 as "QHSUSB_DLOAD"? and attempts to install a driver. I'm gonna try to find the right driver to manually install, and troubleshoot from there. I mean come on guys, be optimistic. How great if this problem was RESOLVED? Also, the download mode got wiped/overwritten from a different ROM for a different model of the GS3. What about the Recovery? CWM? If I can just magically, somehow, maybe even push some type of command. Even maybe ADB? Or something in the terminal. I'm really trying to find a solution. So in the future, we will have a SOLUTION.
Anyways, I'm going to be shipping my GS3 Monday or Tuesday for Samsung to repair (If they can) or replace for no charge!
Wish me luck guys, gonna be really thinking out of the box.
Hope you can figure it out. But someone had a way to fix a hard brick.... The JTAG
Sent from my SGS3 running Eclipse 2.1
Okay guys, I've actually have gotten some good progress, I hope! I came across a thread that a guy named (therockk) he also, hard bricked his S3. Sent him a PM, and he told me he got ODIN to recognize his hard bricked S3 "WITHOUT" download mode. He said he found a driver for QHSUSB_DLOAD and manually applied the driver update. His PC, then recognized his S3 as a ID CODE: COM10 - I do not know what that means, I asked around. Some people say that it is the code for when your phone is connected in Download Mode? Nevertheless, this is good in my eyes. The phone as now, recognized as COM10 in ODIN, in its hard-bricked stage. This could be that also, maybe, the phone will be recognized in ADB/Fastboot commands. Maybe we can get something going here guys! I'm trying to look on the bright side. I'll keep you posted.
EDIT: Okay guys, was looking at some screenshots of the CODE ID's. Like I said, my buddy "therockk" said he got ODIN to recognize his phone as a COM10, while being hard-bricked. I am guessing there are different CODE ID's for each model/version of the S3. I did make an observation that he, has a different model S3 ( i747 ) and he got his to see COM10. Which means it was Added!! - My Verizon S3 (SCH-1525) should come up as COM4 when the PC recognizes it. When I do get my PC to recognize my S3, I will confirm that my SCH-1535 phone comes up as COM4, if not, I will confirm the correct CODE ID. therockk's i747 came up as a COM10, that is confirmed.
EDIT 2: Okay guys! Updated the driver successfully! QSHUSB_DLOAD is now Qualcomm HS-USB QDLoader 9008 (COM8). I feel like we're getting closer. Now to see if Odin will pick it up!
I can probably help you through this problem after work tonight if you are still having trouble. Just pm me around 10pm est
Sent from my SCH-I535 using xda app-developers app
my galaxy SL suddenly getting boot loop.then i tried flash with odin.i dont know what going wrong.now i just can enter download mode.but i cant go to recovery mode.my phone is rooted with jellybean install.so what should i do to recover the phone back ?
galaxy SL i9003
country malaysia
android Jellybean 4.1.1 (forgot already but sure its jellybean)
i saw alot people said XXKPE Gingerbread Firmware.
i scared to try.so i hope u guys can explain for me.
To flash kpe first you have to flash (latona) with odin in pit,then pull the battery and enter download mode again and flash the other 3 files incuded in the firmware. Here is the link
http://forum.xda-developers.com/showthread.php?t=1004647
Read carefully and dont get nervous if you can access download mode you are able to recover the phone.
Good luck.
Sent from my GT-I9003 using xda premium
i already done the flashing the device.after i flash the 3 thing.the phone not restart and after that i pull the batery.the phone not going to any mode anymore.this time i really dont know what to do.
Can't get into recovery/ download mode? Looks like it's bricked..
Lim Wee Huat said:
Can't get into recovery/ download mode? Looks like it's bricked..
Click to expand...
Click to collapse
yea i think so.i cant go download mode anymore.before i flash i still can go to download mode and i cant go to recovery mode.and now cant already after i flashing with GT-I9003_PDA-XXKB3.so this phone still can repair or not ? i mean repair by myself or help from the other.or i just straight go to samsung center.how much is the cost exactly
qimux said:
yea i think so.i cant go download mode anymore.before i flash i still can go to download mode and i cant go to recovery mode.and now cant already after i flashing with GT-I9003_PDA-XXKB3.so this phone still can repair or not ? i mean repair by myself or help from the other.or i just straight go to samsung center.how much is the cost exactly
Click to expand...
Click to collapse
Don't bother replacing, go get yourself a new phone. No budget? Get s2, it's still quite usable with CarbonRom. Got budget, get anything better.. You'll be happier. With Jellybean, i9003's already struggling so hard. Honestly, don't put hope on key lime pie. The i9003 development currently happening here are for the remaining surviving daredevils who have yet brick their i9003. Anyway for repair, you can always walk into their service centre and ask for quote.. I've hard bricked my 1st i9003 around 3 years back and they quoted RM4/5XX for the motherboard and I don't think they have got stock now too.
Lim Wee Huat said:
Don't bother replacing, go get yourself a new phone. No budget? Get s2, it's still quite usable with CarbonRom. Got budget, get anything better.. You'll be happier. With Jellybean, i9003's already struggling so hard. Honestly, don't put hope on key lime pie. The i9003 development currently happening here are for the remaining surviving daredevils who have yet brick their i9003. Anyway for repair, you can always walk into their service centre and ask for quote.. I've hard bricked my 1st i9003 around 3 years back and they quoted RM4/5XX for the motherboard and I don't think they have got stock now too.
Click to expand...
Click to collapse
nevermind about that.i think i just flash with wrong rom.i put i9000 rom. on i9003 wow :good:
qimux said:
nevermind about that.i think i just flash with wrong rom.i put i9000 rom. on i9003 wow :good:
Click to expand...
Click to collapse
That's what I did to my 1st i9003 too!! Yup, confirmed it's a hard brick...
so i cant repair by myself for hard brick ?
i really need to repair because its my brother phone.
he still study so i guess he dont have much money to buy new phone.
i really hope i can repair.
qimux said:
so i cant repair by myself for hard brick ?
i really need to repair because its my brother phone.
he still study so i guess he dont have much money to buy new phone.
i really hope i can repair.
Click to expand...
Click to collapse
Sadly, no for hard brick. It still can be saved if it's a soft brick or boot loop..
i saw on youtube.i can revive with JTAG
qimux said:
i saw on youtube.i can revive with JTAG
Click to expand...
Click to collapse
Good luck..
errr..its like you saying that the phone cant be revive with JTAG.i had to try
hello, i have major issue on my nexus 5. my phone keep stuck in bootloop and its rooted, unlocked bl and have cwm. sent it for repair at the place i buy it but they dont accept it because the water mark in the phone turned red. furthermore, my nexus is an AP set, so cant sent for manufacturer warranty. i try to sent it to my friend (he's pro in fixing phone software) but still he cant fix it. the cwm also lost so i have no recovery. i presume that the phone broke because of software or hardware (my nexus 5 power button rattle) or maybe both..its been a month and i almost give up on my nexus 5 but i dont want to buy new phone cause im a student and have a tight budget. im willing to repair my nexus 5 but idk where i should sent it for repair. im willing to sent it to repair to overseas if its necessary. im from malaysia btw. please help me anybody out there :crying::crying:
El Taco said:
hello, i have major issue on my nexus 5. my phone keep stuck in bootloop and its rooted, unlocked bl and have cwm. sent it for repair at the place i buy it but they dont accept it because the water mark in the phone turned red. furthermore, my nexus is an AP set, so cant sent for manufacturer warranty. i try to sent it to my friend (he's pro in fixing phone software) but still he cant fix it. the cwm also lost so i have no recovery. i presume that the phone broke because of software or hardware (my nexus 5 power button rattle) or maybe both..its been a month and i almost give up on my nexus 5 but i dont want to buy new phone cause im a student and have a tight budget. im willing to repair my nexus 5 but idk where i should sent it for repair. im willing to sent it to repair to overseas if its necessary. im from malaysia btw. please help me anybody out there :crying::crying:
Click to expand...
Click to collapse
Flash the factory image first. If it doesn't work, use the LG tool to completely flash everything on your phone from scratch.
If that doesn't work, you'll have to send it somewhere to get it fixed.
usaff22 said:
Flash the factory image first. If it doesn't work, use the LG tool to completely flash everything on your phone from scratch.
If that doesn't work, you'll have to send it somewhere to get it fixed.
Click to expand...
Click to collapse
but i have problem with the adb driver.. my pc wont detect my phone.. LG tool?? what type of tool is it?
El Taco said:
but i have problem with the adb driver.. my pc wont detect my phone.. LG tool?? what type of tool is it?
Click to expand...
Click to collapse
Fix your adb first then.
Anyone figured anything out?