Hi, i bought Asus TF300T 1 month ago in Taiwan.
When I turn on the screen by pressing Power button, I use it 5-10 minute and the screen has some point "auto-touch", example: I reading book and Home button on Notification bar was touch, like someone try touch that button continuous (And more point in the screen have same problem). I must press Power button again to turn off the screen then try press 1 more to turn on it. And use 5-10 minute, problem return, again.
I tried hard reset it but it not change.
Any idea? I'm so sad and worry.
Related
My vox keeps on restarting when the microsd card is inside, and when it's outside its just doesn't getting to the home screen. It's getting stuck on the second HTC logo.
It is after I did soft reset to my device after I used the SDA_ApplicationUnlock and the new comm manager style (list):
http://forum.xda-developers.com/showthread.php?t=355490
I've tried hard reset:
http://www.modaco.com/index.php?showtopic=255861&mode=threaded
And it doesn't seam to work... ):
When I push all the 3 keys altogether when the VOX is off the phone doesn't even turn on, just pushing only the power button turning the VOX on.
So, how can I rescue my VOX?
By the way, I soft reset my VOX by pulling outside the SIM slot and then pushing it back inside.
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
good luck
Nothing happens… only when I press just the power button the phone turning on.
Maybe I don't know what are the two softkeys?
Help!
the sokt keys are the 2 keys between the home and back keys and the d-pad, ie the keys above "1" n "3"
hth
Well, I was wrong about the two softkeys. But its still doesn't seem to work.
When I follow the instruction above the phone is turning on, as usual, but nothing else happens (the phone still gets stuck at the second HTC logo).
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Still doesn't work, its continuing to the screen with the "windows mobile" logo.
I had the same promblem, fixing by removing SIM and go ahead
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed untill...
5. a black screen will aprear with some white text asking for hardreset confirmation.
Greetz BAUr SImon
Hi It still doesnt seem to work with me.
Because i have the same problem and i tried to do all the things from above.
This is bad. man my phone doesnt work.
That's strange, if the phone can go as far as the second htc screen I thought it should be able to hard reset.
Also make sure usb cable is not plugged in while you try to hard reset. I just tried it and I don't get the white text on black screen when I have the cable in.
ן succeeded in doing a HR a couple of days ago, but I forget to write it down here.
The instructions are:
1. Take out the battery of 5 sec.
2. Put in the battery.
3. Press the two soft keys (above 1 and 3), and don't stop pressing.
4. Press the power button. The sec the green light blink, next to the HTC logo, you remove your finger from the power button (this is what no one told me).
5. You are asked to press the SEND button to confirm the HR.
lastOne said:
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
Click to expand...
Click to collapse
lastOne said:
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Click to expand...
Click to collapse
are you sure nobody told you that ?
Sorry, let me rewrite myself:
I didn't fully understand this instruction, and if I didn't understand it good enough maybe other people would understand it as me. So I wrote a farther instruction.
Today I turned on my phone and the touch screen didn't work at all. I can use the track pad but when I open an app I have to restart the phone to get out of it because I cannot use the touch back button.
I took the battery out for 30 seconds. I also tried to use the button code to hard reset (Pressing the call button: green, Track pad, and the Call End button: red) This was the code I needed to press before I rooted my phone. I'm wondering it there is a different button code...
When I used the phone last, about 2 hours ago, it was working just fine.
So I've had my fuze a little over a year now, no major issues. Used mostly energyroms, but about December time I switched back to a simple non-bloated stock rom for the stability.
Anyway today at work I was texting, and I press the power button to put the phone in standby. And the screen remains on and usable. I tried again and it would not go into standby (power button physically feels normal, it does not feel loose or abnormal.) So i let it sit for a few minutes, then i look at it and a message poped up asking if i wanted to turn the phone off (like as if i was holding the power button)so i press no, then it comes up again a few seconds later and aagain and again. So I soft reset the phone.
The phone resets but takes a LOT longer at the att/htc splashscreen, then it hangs at the htc screen and does not make it to the wimo screen, but instead an error screen saying:
"The device is unable to boot because you have either turned off the device incorrectly or tried to install an applicationa from an untrusted source, press SEND to reset your device or press any other button to cancel..."
I think it went through the hard reset this time because when it restarted it asked to calibrate the screen and install stuff. it resets again sometime after that, still takes forever at the splash screen and comes back up to the error, only this time no matter what button i press it wont go away and boot into wimo. It seems like none of my buttons work (they wont light up now) when i slide out the keyboard, it is not lit up like normally.
And heres the kicker, my only way to turn on/off the phone is to take out/put in the battery. As soon as I pop the battery back in the fuze turns on. Is my phone toast? Ive tried to hard reset and the phone does not reach the bootloader, it goes straight to the splash screen. Same with trying to reflash it from my comp, raphealwrapper cannot find my phone.
I've only recently encountered the exact same problem on my Touch Pro, but stock ROM and everything. As far as I can tell, our power buttons are busted and probably need to be serviced. One of the contacts must be stuck in the 'on' position somewhere inside :\ As a temporary fix, I've been using AEButton Plus and remapped double tap end call key to turn the screen off, and removing the stylus to turn it on.
Hi everyone!
Has anyone found a way (maybe an app?) to change the screen backlight/lock behaviour?
What I'm looking for is the following behaviour:
Ability to have the screen only turn off the backlight after a certain amount of time, with
a) option to lock the device at the same time
b) option to also turn off the part of the screen that reacts to touch at the same time
c) options to set the timers for the aforementioned options separately
Basically I want the device to turn the backlight of the screen after 30 seconds to save power, but stay responsive to touch so that I don't need to pick up the device and press the power button before I can use it.
Then, after about 5 minutes, it should lock itself but respond to key presses, so that it can be unlocked without needing to press the power button.
Then, after another five minutes, the screen should completely go off and stop responding to touch altogether (the way it is on Android by default).
Has anyone found a way to do this? It would be REALLY useful for when you've got the phone laying flat on your desk and are IM'ing with a slow typer, meaning you've got 2 or 3 minutes between each message, and need to press the power button every time you get one...
It shohuld be a default setting in my opinion...
Thanks in advance!
Hi, my S3 has a problem in that if the screen turns off and I immediately (well, fairly soon) press the home button or side power button to wake it up again.. there is a very long delay... so much that I only use the home button now, because I keep clicking the side button and often by the time the screen wakes up, it will have gone back to sleep because I had pressed the power button again.
So now I use home because home will not turn the screen off, only on.
Anyhow I'm sure it must be due to some app doing some processing when the screen goes off...
my question is, how do I track down the app? I have no idea which one it is
I have no problem to get the screen to turn on immediately, if some time has passed... let's say 30 seconds.. but often you need to turn the screen back on after it has timed out, so it's annoying to have to wait 10 seconds after immediately pressing the button.
btw. I use Cyanogenmod (android 4.3) but I don't think it's the cause because I don't remember this behaviour when I first installed it.
any ideas? thanks
mishaxz said:
Hi, my S3 has a problem in that if the screen turns off and I immediately (well, fairly soon) press the home button or side power button to wake it up again.. there is a very long delay... so much that I only use the home button now, because I keep clicking the side button and often by the time the screen wakes up, it will have gone back to sleep because I had pressed the power button again.
So now I use home because home will not turn the screen off, only on.
Anyhow I'm sure it must be due to some app doing some processing when the screen goes off...
my question is, how do I track down the app? I have no idea which one it is
I have no problem to get the screen to turn on immediately, if some time has passed... let's say 30 seconds.. but often you need to turn the screen back on after it has timed out, so it's annoying to have to wait 10 seconds after immediately pressing the button.
btw. I use Cyanogenmod (android 4.3) but I don't think it's the cause because I don't remember this behaviour when I first installed it.
any ideas? thanks
Click to expand...
Click to collapse
I'm interested as well, I really wish samsung would improve the wake time on their phones. My HTC turned on without delay