Hi everyone. I am hoping that you will be able to help me because I am not getting any joy from the seller of my tablet. (Letsgomobile Hong Kong)
I am wanting to install the windows drivers for my Zenithink ZT-180 but having problems.
I am holding the round menu button down whilst I power up the Tablet and it shows a small android icon with a triangle containing an '!' inside the triangle on the screen of the tablet and if I press the menu button again it comes up with Android e2 and a mini menu which includes
Reboot
SD card update
clear Cache
and reset to factory settings
But when I plug it into my computer it detects device and is identifying it as Android Eclair.. and it wont accept the drivers included in Burntool 7.2..
looking at the guides on the net it appears that the device should be identifying its self as SEC SOC Test Board..!
Note I have tried several computers running xp,vista and win 7 and all do the same thing
Can anyone advise where I am going wrong? or is it that the tablet is faulty?
if you need any more info let me know
Many thanks in advance
Ken
please someone help me out I feel like I'm fishing aroud in the dark here as android is new to me despite being a Boffin with windows. Sorry I know I haven't posted here before but I have been a member for 4 years.
USB Driver
Hi,
I had to update my ZT180 yesterday because it suddenly did not want to switch on aymore.
I had trouble getting my XP pc to recognise it and finally worked when I used a mini USB cable in the OTG port on the ZT. You have to make sure you are realy pressing the front button before you switch on, and then you will only see the blue light - nothing on the screen.
I tried with a mini USB adapter on a regular USB cable but it did not work. The proper cable came with my Nokia phone.
Here is a link to a good description of the process and a picture of the cable. ...dreambeta.com/support/zenithink-zt-180
Hi thanks for the advice but I am pressing the correct buttons but can't get the blue light to turn from green and instead it comes up on the screen with a triangle a small android and an "!" in the triangle???? pressing the home (round) button brings up a menu...I dont seem to be able to stop it booting into android can it be that the device has been locked????
I received a Traveltek CA908 tablet as a Christmas gift this year and I have not seen much information on it anywhere. I am starting this thread as a repository of information. Feel free to contribute.
First, the specs:
CPU: ARM A20 Dual-Core Cortex A7 1.0Ghz
GPU: Quad-core ARM Mali 400 MP
Operating system: Android 4.2.2 JB
RAM: 1G DDR3
Nand Flash: 4GB
Memory Card: Micro-SD (SDHC, supports up to 32GB)
Display Screen: 9.7inch TFT LCD 1024x768
WIFI: 802.11 b/g/n
I/O Ports: 1x micro USB port, 1x host micro USB port, Micro-SD (SDHC), 3.5mm stereo out, 1080p HDMI out, DC 5V in
Speaker: 8Ω/1W, 1 speaker
Mic: Built-in
Cameras: Front 300K pixels, Rear 2MP
Battery: 3.7V/5500mAh, (4 hours work time)
Net weight: 550g
Size: 240.5*189.5*10MM
I'm also pretty sure this was bought from a home shopping channel in the USA.
Official user manual from Traveltek here (too large to upload)
Recovery mode was somewhat difficult to figure out. The volume buttons do not move the highlight; instead, slide a finger up/down on the "No command" message to move the highlight down/up. Pressing the power button or touching around the "No command" message will choose the highlighted option. Figuring this out took lots of trial and error.
The bootloader seems to be unlocked by default.
I was able to root the device by using Lannig's "utoo-root-signed.zip" file that can be found here.
Direct link here
Don't forget to thank Lannig. This download was blocked by Google Chrome as a malicious file, but all scans came up negative on the .zip and its contents.
To install:
Download file > copy to Micro-SD card > put Micro-SD in tablet > boot into recovery mode > load from TF > choose utoo-root-signed.zip > reboot tablet
I have not found any custom ROMs written specifically for this tablet.
Reset?
Hi
I have another model of the same brand. I put a password in but forgot what it is and is trying to do a factory reset. I tried using power button and Vol+but it didn't work. Do you have another way to do a factory reset? Thanks for your time.
i956
CytoBob said:
I received a Traveltek CA908 tablet as a Christmas gift this year and I have not seen much information on it anywhere. I am starting this thread as a repository of information. Feel free to contribute.
First, the specs:
CPU: ARM A20 Dual-Core Cortex A7 1.0Ghz
GPU: Quad-core ARM Mali 400 MP
Operating system: Android 4.2.2 JB
RAM: 1G DDR3
Nand Flash: 4GB
Memory Card: Micro-SD (SDHC, supports up to 32GB)
Display Screen: 9.7inch TFT LCD 1024x768
WIFI: 802.11 b/g/n
I/O Ports: 1x micro USB port, 1x host micro USB port, Micro-SD (SDHC), 3.5mm stereo out, 1080p HDMI out, DC 5V in
Speaker: 8Ω/1W, 1 speaker
Mic: Built-in
Cameras: Front 300K pixels, Rear 2MP
Battery: 3.7V/5500mAh, (4 hours work time)
Net weight: 550g
Size: 240.5*189.5*10MM
I'm also pretty sure this was bought from a home shopping channel in the USA.
Official user manual from Traveltek here (too large to upload)
Recovery mode was somewhat difficult to figure out. The volume buttons do not move the highlight; instead, slide a finger up/down on the "No command" message to move the highlight down/up. Pressing the power button or touching around the "No command" message will choose the highlighted option. Figuring this out took lots of trial and error.
The bootloader seems to be unlocked by default.
I was able to root the device by using Lannig's "utoo-root-signed.zip" file that can be found here.
Direct link here
Don't forget to thank Lannig. This download was blocked by Google Chrome as a malicious file, but all scans came up negative on the .zip and its contents.
To install:
Download file > copy to Micro-SD card > put Micro-SD in tablet > boot into recovery mode > load from TF > choose utoo-root-signed.zip > reboot tablet
I have not found any custom ROMs written specifically for this tablet.
Click to expand...
Click to collapse
i956 said:
Hi
I have another model of the same brand. I put a password in but forgot what it is and is trying to do a factory reset. I tried using power button and Vol+but it didn't work. Do you have another way to do a factory reset? Thanks for your time.
i956
Click to expand...
Click to collapse
You will need to enter into recovery mode to reset to factory settings. Turn the tablet completely off, hold the power and Vol+ buttons until the tablet boots into recovery mode, move the highlight to "wipe data/factory reset", then press the power button to select it. You will then need to go down the list to highlight "Yes" and press the power button again to choose it.
After completing the above steps your screen will say "Reset Complete". Once this message pops up, select "Reboot system now" (again, to take the option, press your power button once it is highlighted) and you will be brought back into the Android OS.
These steps are no different from all other Android devices. If you still have trouble after reading the above information, search for "Android recovery mode factory reset" on youtube for video tutorials.
GPS
CytoBob said:
I received a Traveltek CA908 tablet as a Christmas gift this year and I have not seen much information on it anywhere. I am starting this thread as a repository of information. Feel free to contribute.
First, the specs:
CPU: ARM A20 Dual-Core Cortex A7 1.0Ghz
GPU: Quad-core ARM Mali 400 MP
Operating system: Android 4.2.2 JB
RAM: 1G DDR3
Nand Flash: 4GB
Memory Card: Micro-SD (SDHC, supports up to 32GB)
Display Screen: 9.7inch TFT LCD 1024x768
WIFI: 802.11 b/g/n
I/O Ports: 1x micro USB port, 1x host micro USB port, Micro-SD (SDHC), 3.5mm stereo out, 1080p HDMI out, DC 5V in
Speaker: 8Ω/1W, 1 speaker
Mic: Built-in
Cameras: Front 300K pixels, Rear 2MP
Battery: 3.7V/5500mAh, (4 hours work time)
Net weight: 550g
Size: 240.5*189.5*10MM
I'm also pretty sure this was bought from a home shopping channel in the USA.
Official user manual from Traveltek here (too large to upload)
Recovery mode was somewhat difficult to figure out. The volume buttons do not move the highlight; instead, slide a finger up/down on the "No command" message to move the highlight down/up. Pressing the power button or touching around the "No command" message will choose the highlighted option. Figuring this out took lots of trial and error.
The bootloader seems to be unlocked by default.
I was able to root the device by using Lannig's "utoo-root-signed.zip" file that can be found here.
Direct link here
Don't forget to thank Lannig. This download was blocked by Google Chrome as a malicious file, but all scans came up negative on the .zip and its contents.
To install:
Download file > copy to Micro-SD card > put Micro-SD in tablet > boot into recovery mode > load from TF > choose utoo-root-signed.zip > reboot tablet
I have not found any custom ROMs written specifically for this tablet.
Click to expand...
Click to collapse
Just a Question:
Has this tablet a GPS Module?
I get into recovery fine but than my volume buttons dont move the highlighted selection. My volume buttons work for everything else
---------- Post added at 08:10 PM ---------- Previous post was at 07:59 PM ----------
nevermind, i read better, lol
Thanks for the help. I was following the on-screen instructions with the volume button with no success at all. The screen swiping worked.
Unfortunately, I'm fixing this tablet for a customer and the screen is a bit cracked. It's a quite thick plastic screen, so it doesn't completely fail. It took a lot of finesse, stroking and feeling uncomfortable with my life choices to get around that.
ilgemello said:
Just a Question:
Has this tablet a GPS Module?
Click to expand...
Click to collapse
From what I can tell, this tablet does not have a GPS module.
Ametenshi said:
Thanks for the help. I was following the on-screen instructions with the volume button with no success at all. The screen swiping worked.
Unfortunately, I'm fixing this tablet for a customer and the screen is a bit cracked. It's a quite thick plastic screen, so it doesn't completely fail. It took a lot of finesse, stroking and feeling uncomfortable with my life choices to get around that.
Click to expand...
Click to collapse
Within 2 months of almost no use the battery had expanded so badly that the back panel started to snap off. I haven't tried doing anything with it since I tossed the battery.
All phones I have had in the past 4 years have been better and faster than this tablet.
Didi anybody bother to develop a custum rom for this piece of s##t table ?
Any rom or stock firmware?
Hello there,
I bought this tablet 2 weeks ago,everything is fine but the WIFI
It keeps disconnecting or does not connect at all.
What should I do ,pls help
It has android on it only ,no windows
TIA
Hello, I have the following problems with the purchased tablet Chuwi Hi9 Air Black 64GB MediaTek Helio X23 (MT6797D) 2,31 GHz.
1. The belts will appear from time to time when using the camera.
2. After starting the tablet and turning off the screen (by briefly pressing the button), the screen can no longer be switched on again. It is necessary to hold the button longer and restart the tablet.
3. When using the device, the self-restart has been repeated several times.
4. Instead of white, the screen shows a green color. I adjusted the colors as best as I could.
Videos and photos about the problems I have described can be found here: drive.google.com/drive/folders/1RxXYozK5Sh9V9Nts3lNGP17nBCTmgTyL?usp=sharing
I thought that after some time of use described problems will disappear. Unfortunately, they are still there. Returning to factory settings also did not solve problems. The tablet has the latest updates downloaded from the internet.
Can you help me solve the problems?
Tom
Hi There
Im new to Android Auto and need some help recovering my head unit. While driving someone removed a USB stick while music was playing from it on the unit. The unit displayed the word "formatting" on the screen and then rebooted to black screen and now Im stuck. the Unit has no sd card slots. The buttons light up and on holding the reset button the lights flash about 3 times but no recovery screen appears and display is just black or off. I have found a copy of the HXD rom online and loaded it onto a usb in both "update.zip" and a renamed "update.img" on the root of the usb but the unit not even lighting up the USB Drive? what am I doing wrong?
If you have HDMI out see if that works so you can at least see what you're doing. If you somehow flashed the wrong screen config I've explained how to fix that in this thread...
https://forum.xda-developers.com/an.../dasaita-max-10-downgrading-1280x720-t4191321
First of all, sorry for my spelling. I'm from Argentina.
Here are some photos of the case closed and opened and the "official" specs:
https://smithmayorista.com.ar/producto/ ... -mxq-max/
Brand: MXQ MAX
4gb ram
MALI 450 MP GPU
the board is p281
CPU-Z says it have a s905X processor but i know that this brands fakes it.
I think it really is a a s905W (because after many tries) the only TWRP i could install was for that CPU (especifically for the Tanix TX3 Mini).
I also read in some place that board p281 corresponds to s905w but I'm not really sure.
I can't identify the processor by removing the heatsink because it had glue sticked on it and by trying to remove that the name got erased,
Its not the same box as the on on this post:
viewtopic.php?t=4011&sid=f4504ee67416fc ... f69e24aff
You can tell by the photos i uploaded is not the same board (no clock, different ports)
¿Is there a way i can be sure what processor do I have?
i want to try some roms becase the live straming on browsers on fullscreen is terrible
I also want to know if there is a way to enter recovery mode phiscally, in case somethig goes wrong.
it doesn have a reset button. It does have a button next to the power plug but i don't know what it does.
Nothing happens when i press it, or when i power on the box with that button pressed.
It also internally comes with a port with 4 pins (similar to the ones for webcam or fan connectors). I dont know whati s that for.
it also doesnt get recgnized by the Amlogic burning tool so i can only install twrp zips/backups
Any help would be appreciated
Thanks in advance
It may be a RockChip 3229
board. The images aren't clear enough for me to see everything on the board to give you much information.. I can give you a website that may help you with that particular unit. Along with a YouTube channel that's very insightful when it comes to the mxq boxes. Inside of the audio port where you would plug in a headphone 3.5 mm Jack if you took a q-tip cut the end off of it to where it's just the shaft of the stick if you push it in there slightly you may feel a button in there that would be the reset buttons give that a shot also you should be able to take it into recovery mode with that.
https://youtube.com/c/MXQPROJECT
Contact Support
semental said:
First of all, sorry for my spelling. I'm from Argentina.
Here are some photos of the case closed and opened and the "official" specs:
https://smithmayorista.com.ar/producto/ ... -mxq-max/
Brand: MXQ MAX
4gb ram
MALI 450 MP GPU
the board is p281
CPU-Z says it have a s905X processor but i know that this brands fakes it.
I think it really is a a s905W (because after many tries) the only TWRP i could install was for that CPU (especifically for the Tanix TX3 Mini).
I also read in some place that board p281 corresponds to s905w but I'm not really sure.
I can't identify the processor by removing the heatsink because it had glue sticked on it and by trying to remove that the name got erased,
Its not the same box as the on on this post:
viewtopic.php?t=4011&sid=f4504ee67416fc ... f69e24aff
You can tell by the photos i uploaded is not the same board (no clock, different ports)
¿Is there a way i can be sure what processor do I have?
i want to try some roms becase the live straming on browsers on fullscreen is terrible
I also want to know if there is a way to enter recovery mode phiscally, in case somethig goes wrong.
it doesn have a reset button. It does have a button next to the power plug but i don't know what it does.
Nothing happens when i press it, or when i power on the box with that button pressed.
It also internally comes with a port with 4 pins (similar to the ones for webcam or fan connectors). I dont know whati s that for.
it also doesnt get recgnized by the Amlogic burning tool so i can only install twrp zips/backups
Any help would be appreciated
Thanks in advance
Click to expand...
Click to collapse
semental said:
First of all, sorry for my spelling. I'm from Argentina.
Here are some photos of the case closed and opened and the "official" specs:
https://smithmayorista.com.ar/producto/ ... -mxq-max/
Brand: MXQ MAX
4gb ram
MALI 450 MP GPU
the board is p281
CPU-Z says it have a s905X processor but i know that this brands fakes it.
I think it really is a a s905W (because after many tries) the only TWRP i could install was for that CPU (especifically for the Tanix TX3 Mini).
I also read in some place that board p281 corresponds to s905w but I'm not really sure.
I can't identify the processor by removing the heatsink because it had glue sticked on it and by trying to remove that the name got erased,
Its not the same box as the on on this post:
viewtopic.php?t=4011&sid=f4504ee67416fc ... f69e24aff
You can tell by the photos i uploaded is not the same board (no clock, different ports)
¿Is there a way i can be sure what processor do I have?
i want to try some roms becase the live straming on browsers on fullscreen is terrible
I also want to know if there is a way to enter recovery mode phiscally, in case somethig goes wrong.
it doesn have a reset button. It does have a button next to the power plug but i don't know what it does.
Nothing happens when i press it, or when i power on the box with that button pressed.
It also internally comes with a port with 4 pins (similar to the ones for webcam or fan connectors). I dont know whati s that for.
it also doesnt get recgnized by the Amlogic burning tool so i can only install twrp zips/backups
Any help would be appreciated
Thanks in advance
Click to expand...
Click to collapse
That button may be the reset button have you tried holding it down while you plug in the Box keep holding it down to see what happens you may need to do that while it's plugged into your computer hold down that button and plug it into USB port keep holding it down see if your computer recognizes it just grab the rock chip drivers along with the Phoenix drivers am logic drivers just install all the drivers and eventually a Windows machine should recognize the chip.
Metalheadx said:
That button may be the reset button have you tried holding it down while you plug in the Box keep holding it down to see what happens you may need to do that while it's plugged into your computer hold down that button and plug it into USB port keep holding it down see if your computer recognizes it just grab the rock chip drivers along with the Phoenix drivers am logic drivers just install all the drivers and eventually a Windows machine should recognize the chip.
Click to expand...
Click to collapse
i didn´t try to plug the USB while i was holding it. I did try holding it down when y plug the power and nothing happens, it just boots the system normally. I´ll try that later in home and tell you if it gets recognized by windows