I bought my TF300t from B&H on April and it works fine. But a couple days ago, its touch screen did not work. Sometimes, after reboot, it responded a short time but failed soon. I have performed a factory reset, it seemed to have been resolved. But the touch screen failed again in a day.
I noticed a few report of similar problems but still have no idea how can I fix it. Does anyone have any ideas?
Thanks!
same here
longbow0 said:
I bought my TF300t from B&H on April and it works fine. But a couple days ago, its touch screen did not work. Sometimes, after reboot, it responded a short time but failed soon. I have performed a factory reset, it seemed to have been resolved. But the touch screen failed again in a day.
I noticed a few report of similar problems but still have no idea how can I fix it. Does anyone have any ideas?
Thanks!
Click to expand...
Click to collapse
Exactly the same Problem Here.did also factory reset.happend again. Only 8 apps installed. Ans news. Im in the newest Android Version available
Sometimes my touchscreen just goes flipping around, acting like it got impulses but i dont touch the screen..
Then i do screen off and on and its okay it happenes a lot actually lately
Related
Hi Guys,
I just recently had a problem with the screen of my 750. The screen stops responding after the first touch.
I would like to know if theres is a way to skip this alignment screen process. Right now i´m stuck at this screen.
Thanks for your help
http://forums.palm.com/palm/board/message?board.id=hardware&thread.id=16220
I think this will help u.
jesusodin said:
Hi Guys,
I just recently had a problem with the screen of my 750. The screen stops responding after the first touch.
I would like to know if theres is a way to skip this alignment screen process. Right now i´m stuck at this screen.
Thanks for your help
Click to expand...
Click to collapse
After using my used Treo 750, WM 6, AT&T for about two months, it started experiencing the screen problem. Upon hard reset, the screen would respond to the first tap, and be almost unresponsive to the calibration. I had to press repeatedly very firmly. Went through a couple of hard resets and it didn't get better.
The screen would respond find for a while and then start working. I thought that I had it all taken care of and was working well yesterday until the afternoon rolled around. It started being unresponsive again. After a hard reset, it would respond to the first touch and then calibration barely worked.
Finally, I was able to get into it and installed Palm's Device Reset and ran it. It has since then been calibrating fine. I'm only using it bare bones right now and won't be able to test it more in depth until this weekend to see if the problem is resolved.
I did notice using SKTooks that the gwes.exe process was running at a high percentage while this was occurring, near 40-50 % when it is running at 0% now.
Any thoughts? ANyone tried the device reset at:
http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,kb=PalmSupportKB,t=ooccase,case=obj(9260)
Treo 750 touch problem
Hi , I'm having the same problem wit my Treo . Did you solve your problem?
Hey Davidoff,
For quite a while, mine acted up, so much that I bought a used Wizard to replace it. Even after performing the device reset as I noted above, it would still be unresponsive at times, with the GWES.exe process (as shown by SKTools) running much higher.
For a while, I let it set without it's battery (perhaps a week) and then reinserted, fully charged it and immediately disabled ALL today plugins. So far, it has been running great but I'm very tentative to switch back to it as my primary phone, even though I love it.
I'm wondering if you can try disabling your today screen plug-ins, set the screen backlight to dim at one minute and the device to auto-off at one minute and see if this helps to resolve the issue. I'm curious as to whether any of those three combinations made a difference in mine, or have just bought time until it acts up again.
Anyways, I'd be interested to learn your results.
Brian
Hi,
I bought a TF300TG last year. It's working good since my trip to China in April this year.
There the touchscreen stopped working. I could only use the device with the touchpad.
I tried rebooting and it there was a message like: "no touch screen driver found" or so. (I don't remember the exact message)
So I left in the suitcase.
When I came back the problem was gone... for the moment...
Since then sometimes the touchscreen works when I boot the tablet and sometimes it doesn't. I can't see a regularity.
I've tried to reset the tablet, I tried custom and stock roms, but the problem appears on both.
So, what can I do? (except sending it to Asus)
Thanks for your help and excuse me for my bad English.
Simon-PC
The only fix I know is let the battery completely die. I mean run it down to as far as when it switches off then leave it for a day.
Recharge it and then the screen should come back.
I purchased my NVIDIA tablet yesterday but having problems with the responsiveness coming from sleep. About 1/5 of the time, my tablet will not respond to my finger/stylus. I always have to press the power button a few times to get it to work.
I have all the updates, including the recent update from yesterday. Is this defective?
Thanks in advance
ttxcsabby said:
I purchased my NVIDIA tablet yesterday but having problems with the responsiveness coming from sleep. About 1/5 of the time, my tablet will not respond to my finger/stylus. I always have to press the power button a few times to get it to work.
I have all the updates, including the recent update from yesterday. Is this defective?
Thanks in advance
Click to expand...
Click to collapse
I've never experienced any issues like this. Contact Nvidia Customer care.
This screen is very responsive!! Make sure you are all up to date with your ota and make sure you have a look in a settings / SHIELD POWER CONTROL/ OPTIMIZED
ttxcsabby said:
I purchased my NVIDIA tablet yesterday but having problems with the responsiveness coming from sleep. About 1/5 of the time, my tablet will not respond to my finger/stylus. I always have to press the power button a few times to get it to work.
I have all the updates, including the recent update from yesterday. Is this defective?
Thanks in advance
Click to expand...
Click to collapse
I've had that many times during one single day. Had to literally reboot the thing 5 or 6 times that day. COMPLETELY NO RESPONSE FROM THE SCREEN, ONLY BUTTONS. Still have to clue what the deal was. Hasn't done it since, but the issue DOES exist. And yes, I bought from the very first batch, straight from Nvidia.
I've had this problem since day one. Also the tab crashes at random times and it getting ****ing annoying. Thinking of returning the thing. It's worse than useless. Turn the screen off and you can bet that i'll have to reboot to get the touchscreen working again.
Idk why this helped but it did. I switched from using philz touch recovery to cwm recovery...now screen works less than half the time I turn it back on. That's still better than never.
Sent from my SHIELD Tablet
I've never experienced this on Stock, Only on Pac-Man ROM and CM11. Either way it is very annoying.
This is a reaaallllllyy ghetto work around until the issue is solved, but the way I worked around it on CM11 is to have Tasker and Secure settings wake the device for a few seconds every 45 mins - 1 hour. Ever since I've had Tasker performing that task I've had no issues with the screen being unresponsive.
I have figured out how to fix the touchscreen issues. All you have to do is go under Settings>Apps>All Apps and find anything that ranges from Google Taiwanese or any Google foreign language app and disable it. There should be two of them. I haven't had any problems since I disabled them. :good:
I found something that has worked so far. I always use Nova launcher since it's my fav. I didn't think much of leaving the launcher that came with the rom. I went to titanium backup and froze the other launcher and it solved the touchscreen issue. This also fixed the app crashing problems most of the time. Still if I run more than two applications at the same time everything on the tab starts crashing. Seems to be a ram problem. I checked max backround processes and it's at "normal" which usually is fine. If anyone has a solution to the crash problem please let me know. Meanwhile i'll keep trying stuff.
Sent from my SHIELD Tablet
Same problem here... Funnily enough I just wanted to try a custom rom to see whether this issue will be fixed and a new official upgrade to 7.0 came up - https://shield.nvidia.com/support/shield-tablet-k1/release-notes/1
Will see whether ithe problem is gone.
There was a time when my screen became a bit unresponsive. Very random. Calibrating the touch sensor fixed it up. Its a bit hidden but you'll find it by going into Settings>About Tablet (device)>Click on Model Number 3 times>The calibrating settings will pop up hit Touch then hit Start. It'll do it's thing and reboot. Hopefully it helps.
2kool2Bcruel said:
There was a time when my screen became a bit unresponsive. Very random. Calibrating the touch sensor fixed it up. Its a bit hidden but you'll find it by going into Settings>About Tablet (device)>Click on Model Number 3 times>The calibrating settings will pop up hit Touch then hit Start. It'll do it's thing and reboot. Hopefully it helps.
Click to expand...
Click to collapse
I had a similar issue with touchpoints not working near the corners, calibration fixed things for me also. It's pretty quick and easy to do so I urge you to try that before doing a factory reset.
So far so good... Android N seems to fix the problem
Sent from my Pixel using Tapatalk
Hello everyone,
i'm experiencing a problem with my shield tablet since couple days ago. My touch screen is not working. Up until yesterday i had to reboot in order to make it to work but now even when I'm rebooting is not working.
I tried to reset to factory setting but it's still the same. I'm curently running lollipop. Does anyone has a solution?
Thanks in advance for your replys guys.!
Does the screen work when you restart it in bootloader mode?
Sent from my Asus Infinity TF700 with Dock
Sadly, no...
gregargx said:
sadly, no...
Click to expand...
Click to collapse
hopefully you get a good answer mine is starting to lose multitouch at times.
Then your device is sadly broken.
Just RMA it to Nvidia, they will replace it swiftly.
I've just got this issue today. Using my tablet normally and suddenly the screen touches aren't executed or responsive. I haven't updated to lollipop still using Kitkat 4.4.2
I am on my second shield tab and multi-touch is a problem. For example, in a game with analog joystick on left side of screen and pressing the action buttons on the right side to not both work at the same time. Happens on multiple games. Is this a known issue and is there a way to calibrate or correct it? Thanks.
EDIT: i just did a touch screen calibrate and that fixed it. good to go for now
So My gf & I both have the same phone (Idol 3 5.5, Single SIM) Mine works fine so far without any issues, though hers has had the touchscreen randomly stop receiving touch inputs at least twice during work today?
I'm pretty savvy, so I've already tried a few things to try and work the issue out.
Disabled all gestures under settings
Factory reset
Still it has happened again.
Any thoughts guys?
UPDATE: Contacted Amazon for replacement, they were happy to comply with the request.
mrm0rbid99 said:
So My gf & I both have the same phone (Idol 3 5.5, Single SIM) Mine works fine so far without any issues, though hers has had the touchscreen randomly stop receiving touch inputs at least twice during work today?
I'm pretty savvy, so I've already tried a few things to try and work the issue out.
Disabled all gestures under settings
Factory reset
Still it has happened again.
Any thoughts guys?
Click to expand...
Click to collapse
Sounds like a hardware defect (broken digitizer)
mrm0rbid99 said:
So My gf & I both have the same phone (Idol 3 5.5, Single SIM) Mine works fine so far without any issues, though hers has had the touchscreen randomly stop receiving touch inputs at least twice during work today?
I'm pretty savvy, so I've already tried a few things to try and work the issue out.
Disabled all gestures under settings
Factory reset
Still it has happened again.
Any thoughts guys?
Click to expand...
Click to collapse
Hardware problem.
Sent from my 6045I using Tapatalk
I messed with it for awhile when she got home today. Performed another factory reset. Eventually it bootlooped several times before I called it quits. Amazon is already sending a replacement.
Guess she got a lemon. Nuff said.