Related
Hi,
i just got rooted my g2x 2.3.3 (stock rom), can anybody help me how to overclock it??
Thanks
You need to flash a kernel that supports overclocking. Check over in the development section for one that's compatible with your rom.
yogieajuz said:
Hi,
i just got rooted my g2x 2.3.3 (stock rom), can anybody help me how to overclock it??
Thanks
Click to expand...
Click to collapse
Use http://forum.xda-developers.com/showthread.php?t=1102720
I used it when I was stock rooted GB and it works great!!!
hope this helps and good luck!!
MisfitX said:
Use http://forum.xda-developers.com/showthread.php?t=1102720
I used it when I was stock rooted GB and it works great!!!
hope this helps and good luck!!
Click to expand...
Click to collapse
sorry,
what about after flash new kernel then not working, how i back to the original one?
thanks
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
phburks said:
You need to flash a kernel that supports overclocking. Check over in the development section for one that's compatible with your rom.
Click to expand...
Click to collapse
i have stock room and i rooted from your link before.
thanks
yogieajuz said:
sorry,
what about after flash new kernel then not working, how i back to the original one?
thanks
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
i have stock room and i rooted from your link before.
thanks
Click to expand...
Click to collapse
After you flashed the new kernel you have to use something like SetCPU (from the market) to set the processor speed higher. You can set it up to the maximum speed allowed by the kernel you flashed. Just be careful about running it at max speed for too long. This phone is plenty fast at 1GHz so no need to set it too high and risk damaging your phone.
Sent from my LG-P999 using XDA App
phburks said:
After you flashed the new kernel you have to use something like SetCPU (from the market) to set the processor speed higher. You can set it up to the maximum speed allowed by the kernel you flashed. Just be careful about running it at max speed for too long. This phone is plenty fast at 1GHz so no need to set it too high and risk damaging your phone.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
I'm only running mine at 1.2GHz and it performs fantastic..
Sent from my LG-P999 using xda premium
MisfitX said:
I'm only running mine at 1.2GHz and it performs fantastic..
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
@MisfitX:
Can you give me link (file), which one i have to use, my phone is:
OS: 2.3.3 (Rooted) Stock Rom
Baseband v :xxxx [JUL 152011]
Kernel: 2.6.32.9
Soft Ver.: LG-P999-V21e
Thanks
i appreciated...
yogieajuz said:
@MisfitX:
Can you give me link (file), which one i have to use, my phone is:
OS: 2.3.3 (Rooted) Stock Rom
Baseband v :xxxx [JUL 152011]
Kernel: 2.6.32.9
Soft Ver.: LG-P999-V21e
Thanks
i appreciated...
Click to expand...
Click to collapse
http://www.multiupload.com/KFCY74Q85M
That's faux123's 0.1.3 kernel for stock GB roms, works great!!
Thanks faux123
And good luck, hope it helps...
Sent from my LG-P999 using xda premium
MisfitX said:
http://www.multiupload.com/KFCY74Q85M
That's faux123's 0.1.3 kernel for stock GB roms, works great!!
Thanks faux123
And good luck, hope it helps...
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
@MisfitX,
how if i want to back to original like before i flash this kernel, what i have to do like uninstall this kernel maybe?
Sorry, i'm new on this.
Thanks
Has anyone posted a flashable zip for the stock GB kernel so if you try this and don't like it you can go back to stock easily? I have searched and cannot find it.
yogieajuz said:
@MisfitX,
how if i want to back to original like before i flash this kernel, what i have to do like uninstall this kernel maybe?
Sorry, i'm new on this.
Thanks
Click to expand...
Click to collapse
The best way would be to make a backup first, then follow the steps to flash the new kernel.. That way if you don't like it or if you have a problem you can always reboot into recovery and restore that backup..
Side note: its always a good idea when flashing anything to your phone to have a back up plan. Like what you will do if something has a problem or you don't like it.. Backup, backup, backup..
Good luck hope this helps
Sent from my LG-P999 using xda premium
Gotcha.....
Sent from my LG-P999 using XDA Premium App
I tried this but it didn't seem to work. I saw the new kernel version in settings, and in SetCPU it showed 1100 as the speed, but when I went to adjust the slider it maxed out at 1000, not 1500. Did I do something wrong?
When in set cpu ; settings; detect new frequencies. Then try it.
Sent from the fastest g2x in the world
Edit: nevermind, I needed to autodetect after installing kernel. Thank you so much.
Is anyone using a different kernel with the new v21y baseband?
Faux's 14b 2.
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
14b2? I'm familiar with the g2x prior to baseband update but I've never seen that one...link?
Sent from my LG-P999 using XDA
Check on rootz, second to last post.
Sent from my LG-P999 using Tapatalk
Faux all the way.
http://forum.xda-developers.com/showthread.php?p=25924733
Sent from my LG-P999 using xda premium
I'm using the 14b2 faux123 kernel with v21y. It's a lot better than the stock kernel.
Sent from my LG-P999 using XDA
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Sk8trfred said:
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
There you go.
Sent from my LG-P999
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
andrewNY said:
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
Click to expand...
Click to collapse
What about battery life?
Sent from my LG-P920 using XDA
cricketAC said:
There you go.
Sent from my LG-P999
Click to expand...
Click to collapse
Switch to a different browser if want to save more battery
Sent from my LG-P999 using xda premium
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
aaCotyaa said:
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
Click to expand...
Click to collapse
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
cricketAC said:
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
Click to expand...
Click to collapse
That one works with the new bb?
aaCotyaa said:
That one works with the new bb?
Click to expand...
Click to collapse
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
cricketAC said:
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
Click to expand...
Click to collapse
Just looked into it. Apparently 050 is for Rc2 only.
---------- Post added 2nd June 2012 at 12:06 AM ---------- Previous post was 1st June 2012 at 11:49 PM ----------
OK, I got it working. I flashed my old favorite Trinity kernel. I really didn't expect it to work, but apparently it does.
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
jimmydafink said:
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
Click to expand...
Click to collapse
That would explain it then lol
I running T15-G2x-06022012 with CM7 RC3 OCed to 1400 with out issues
For Faux's 014b2 kernel, which do you recommend when running Kwes' modified stock ROM (v21y)? I see pre-UV and stock voltage versions. I'm leaning towards stock voltage, but is there a major advantage for the pre-UV? (I'm not even really sure what is meant by pre-UV -- pre-under voltage?)
Thanks!
EDIT: pre-UV is pre-under volted. From a little more reading, I found that pre-UV means the kernel has a -50mv UV already. So if using UV/OC tools and apps, you need to take into account that -50mv already.
http://forum.xda-developers.com/showpost.php?p=14887835&postcount=262
Hopefully this explanation helps anyone else with a similar question.
To run with for an ICS rom?
Including Lighting and CM9 - which one is most stable.
Anyone provide OV/UV?
Thanks,
Rico
I don't know which kernel is the most stable, you could try the Team FAH-Q kernel.
As far as I know, no ICS kernel so far supports OC/UV.
Sent from my SGH-T959V using xda app-developers app
A new ics kernel was just posted in the dev section and it supports oc/uv
Sent from my SGH-T999 using xda app-developers app
Will team fah-q or thomas's lz or this new one work with aokp?
scoop_dtx said:
Will team fah-q or thomas's lz or this new one work with aokp?
Click to expand...
Click to collapse
yes they both work with aokp
straight from the dope house!
Could I get the location of this "Dope House?"
jrosetto said:
Could I get the location of this "Dope House?"
Click to expand...
Click to collapse
if it was relevant to this thread maybe...
straight from the dope house!
Sorry, but you all are way too early for this thread. 3 kernels out right now that were released in the past 1.5 months. Lightning Zap-injectable/BlastoffV2-cwmTWRP/Hefe-cwmTWRP. They are all doing their best to improve each one and eventually have an finished stock kernel. I'm having fun with Hefe so far at 1.2 OC. He is working on a lot of stuff including the setting of UV values. In my opinion, they equally will be beast kernels as development continues. Thank the Devs for their precious time as they work hard, so be patient.
You know blastoff is a bml kernel and will NOT work on the ICS Flavored roms right?
I agree tho some of us (including me) were quick to say oc/uv wasnt possible and then jeffsf stroll's in and drops hefe.
Oh crap that's right. I was testing that on Valhalla Black. Sweet kernel though. Lol
Sent from my SGH-T959V using xda app-developers app
---------- Post added at 06:55 AM ---------- Previous post was at 06:50 AM ----------
rbedell said:
Oh crap that's right. I was testing that on Valhalla Black. Sweet kernel though. Lol
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Sleep deprivation training is key to survival of the zombie apocalypse. J/k thank you for catching that.
SimplyCM10.1-v1 Kernel
These kernels are basically the stock versions of the CyanogenMod 10 and 10.1 Linux kernels, with the addition of Voodoo Sound and optional Voodoo Color. I've also added a few minor patches to get it to compile with the Linaro 12.09 GCC 4.7.2 13.06 GCC 4.7.4 compiler, which is supposed to make it faster. It uses my new AnyKernelEpic method of flashing, so it doesn't affect the ram disk your rom uses to boot, meaning this can be flashed to a wider varity of roms. For example, the CM kernel doesn't always change when a new nightly comes out, so this will still be flashable to new nightlys without me having to rebuilt it and you having to redownload it. This is also could work on CM9 / MIUI / AOKP / etc, but this is a 3.x kernel and I haven't tested it on any of those, so try at your own risk.
Look's like this isn't likely to boot on any roms other than Cyanogenmod 10 due to a recent change in the display driver there. See this post.
FEATURES
Up to date with CM10.1 stable release kernel as of commit 29b35d26ad13804188f71c6fb148246268579205
Up to date with CM10 stable release kernel as of commit f69938bf027965329ba5b6955760b7fa3af1ed95
Voodoo Sound
Voodoo Color (optional)
Dock audio from CM10 / CM10.1
Default governor: Interactive
Default i/o scheduler: Deadline (CM10) / Row (CM10.1)
Built with Linaro
AnyKernel
Stock modem only!
KNOWN ISSUES
Any and all issues that exist in the CyanogenMod kernels.
Kernel version shows as unknown in CM10.1 settings menu. Workaround: Run `uname -a` in Terminal or use any other app that shows kernel version (like Voltage Control)
DOWNLOAD
All downloads - Google Drive folder
File names with -vc- have Voodoo Color enabled
SOURCE
Kernel - github
Build tools - github
THANKS
All the people working on cyanogenmod
supercurio - voodoo sound / color
codeworkx (Daniel Hillenbrand) - patch to compile with GCC 4.7
marcusant - copied his voodoo color patches from the old nyan kernel
CHANGELOG (CM10.1)
Version 1
Up to date with all changes in the CM10.1 stable release kernel
Cherry-picked all patches from CM10 to enable Voodoo Sound, Color, and Linaro build
Built with Linaro 13.06 GCC 4.7.4
CHANGELOG (CM10)
Version 4 - FINAL CM10 VERSION
Up to date with all changes in the CM10 stable release kernel
Version 3
Added latest patches from CM10 for dock audio
Updated toolchain to Linaro 13.06
Version 2
Update to date with CM again
Changed default governor and i/o scheduler
Added voodoo-color build
Version 1
Voodoo Sound
Built with Linaro 12.09 GCC 4.7.2
First! New kernel again
Btw no voodoo colour?
Sent from my SPH-D700 using xda app-developers app
Ooohhhh 2nd... I may just have to try this out...
Dropple said:
First! New kernel again
Btw no voodoo colour?
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I used to be a big fan of it on ICS and earlier, but stock color looks much nicer on JB to me for some reason so I don't really feel the need for Voodoo Color.
Oh noo!!, doesn't works with NS4G modem
Sent from my SPH-D700 using xda app-developers app
Dropple said:
Oh noo!!, doesn't works with NS4G modem
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
I don't think its possible right now for one kernel to work with either modem, so I would have to maintain two branches for that. Since I only use the stock modem, I wouldn't be able to test it so that probably wouldn't end well.
Can it be used on fco9
Sent from my SPH-D700 using xda app-developers app
Sherrillface said:
Can it be used on fco9
Sent from my SPH-D700 using xda app-developers app
Click to expand...
Click to collapse
That's what I'm using it on. It should work on any normal epic modem.
Sent from my SPH-D700 using xda premium
great works
nice to see your work again, I always use your script to extract boot.img
Great work, thank you!
I'd love to try this one but I'm waiting for voodoo color. The other CM10 Kernel here just causes my phone to lockup. I'm hoping one of these Kernel's will eventually work for me!
brickwall99 said:
Great work, thank you!
I'd love to try this one but I'm waiting for voodoo color. The other CM10 Kernel here just causes my phone to lockup. I'm hoping one of these Kernel's will eventually work for me!
Click to expand...
Click to collapse
Nyan doesn't lock up
Sent from my Galaxy Nexus using Tapatalk 2
MДЯCЦSДИT said:
Nyan doesn't lock up
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
....where might this be.....
Sent from my SPH-D700 using xda app-developers app
If there is a SimplyCM10 Kernel version with Voodoo Color in the future, could there please be one without? I can't stand Voodoo Color, personally.
So I Odined FC09, flashed ACSRecovery5-1.0, to flash CM-9.1.0, & I flahed SimplyCM10 & everything seemed cool, but in the end it would not boot passed the Sammy/Cyan screen.
Agent Soap said:
So I Odined FC09, flashed ACSRecovery5-1.0, to flash CM-9.1.0, & I flahed SimplyCM10 & everything seemed cool, but in the end it would not boot passed the Sammy/Cyan screen.
Click to expand...
Click to collapse
Then it doesn't work for cm9 only cm10/JB roms
Sent from my SPH-D700 using Tapatalk 2
Agent Soap said:
So I Odined FC09, flashed ACSRecovery5-1.0, to flash CM-9.1.0, & I flahed SimplyCM10 & everything seemed cool, but in the end it would not boot passed the Sammy/Cyan screen.
Click to expand...
Click to collapse
Here's your likely source of the problem... although it is stated in the OP that the kernel is not guaranteed to work with CM9.
MДЯCЦSДИT said:
Nyan doesn't lock up
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Nyan for CM10 with Voodoo Sound and Color? If so, I'll install it right now! (Just need a link lol)
dohturdima said:
Here's your likely source of the problem... although it is stated in the OP that the kernel is not guaranteed to work with CM9.
Click to expand...
Click to collapse
Once I was using CM-9.1.0 my recovery was CWM6. I only used ACSRecovery because it works for me when I Odin.
---------- Post added at 09:09 PM ---------- Previous post was at 09:04 PM ----------
brickwall99 said:
Nyan for CM10 with Voodoo Sound and Color? If so, I'll install it right now! (Just need a link lol)
Click to expand...
Click to collapse
Dude, it's on the front page
[ICS] Nyan Colonel v5 (Atarashii) Voodoo & No Voodoo
Agent Soap said:
Once I was using CM-9.1.0 my recovery was CWM6. I only used ACSRecovery because it works for me when I Odin.
---------- Post added at 09:09 PM ---------- Previous post was at 09:04 PM ----------
Dude, it's on the front page
[ICS] Nyan Colonel v5 (Atarashii) Voodoo & No Voodoo
Click to expand...
Click to collapse
Isn't that only for CM9?
brickwall99 said:
Isn't that only for CM9?
Click to expand...
Click to collapse
not the one I posted on the last page of that thread with cm10 support
Here is a collection of CM7, Gingerbread, ICS/CM9, JB/CM10 kernels.
Sometimes users encounter errors downloading, mainly when on their mobile device. If this happens, please use a PC to download your file. PM me if you ABSOLUTELY cannot download a file with an e-mail address, and I will send it to you as an attachment.
I've added in version numbers. This will be changed anytime a new kernel/tweak/script is shared. I believe this may be an easy way for members to know without having to load up the thread if there has been an addition.
Thread Changelogs Here
Here are links to the kernel developers OP if you want to read up on features, changelog etc..
Mazout360's Kernel, The Most Recent Developed Kernel :good:
faux123 (faux kernels) :good:
morfic (Trinity kernels)
ttabbal (Dragon CM7 kernel)
djvoleur (CM7 Harsh Based kernels)
Harsh's Original Thread(Harsh's ICS/JB Kernels)
Mazout360's CM7/9/10 Kernel
CM7-Based ROMs, Stock Voltage
CM7-Based ROMs, Stock voltage, overclockable
Hackfest (CM9/10)-Based ROMs, Stock voltage
Hackfest (CM9/10)-Based ROMs, Stock voltage, overclockable
DEPRECIATED RELEASES (v0205)
CM7-Based ROMs, Stock voltage
CM7-Based ROMs, Stock voltage, overcloackable
Hackfest (CM9/10)-Based ROMs, Stock voltage
Hackfest (CM9/10)-Based ROMs, Stock voltage, overclockable
faux123 Gingerbread Kernels(for Rooted Stock ROM's)
This contains versions 13b & 14b
faux GB Kernels
faux123 CM7 Kernels (Not for use with Stock ROMs)
This contains versions 48, 50, 51, 52, & 54/54SV Kernels
faux CM7 Kernels
Morfic Trinity CM7 Kernels
IT'S BEEN REPORTED THAT YOU CANNOT FLASH TRINITY KERNELS USING TOUCH CWM!
YOU MUST DOWNGRADE TO A NON TOUCH CWM!
YOU'VE BEEN WARNED!
Normal (NON-ELP) Kernel
Current:T15-G2x-06022012
Old #1 for users who eat up the 1560MHz kernel:
TD158-G2x 1.58GHz MAX
Old #2 for users that have issues with the 1580Mhz MAX kernel, morfic states to use this kernel version, MAX 1560MHz:
T15max-g2x-20122011 1.56GHz MAX
Morfic Trinity CM7 ELP Series Kernel
!NOTE!
ELP Series has MAX OVERCLOCK LOCKED at 1.1GHz
Current: Extra Low Power, 373MB RAM w/ reboot-able recovery option.
elp-g2x-06022012
Old #1: Extra Low Power Max, 404MB RAM, no reboot into recovery option. Must boot into recovery manually.
elpmax-g2x-20122011
Old #2: X-TRA (?) Low Power, MAX CLOCK 864MHz
XLP-G2x-GBb
Morfic Trinity CM9 Kernel
Current: X-Tra Low Power, for CM9!
XLP-G2x-ICSc
Current: T15, for ICS!
T15-G2x-ICS
Harsh's ICS/JB/CM9/CM10 Kernels
I have not used these myself guys, I offer no support for them.
Harsh's Original Thread
Non-Overclock Version: update-harsh-3.0.44-P999-0510
Overclock Version: update-harsh-OC-3.0.44-P999-0510
The Destroyer Series Kernels (EXTREME OVERCLOCK)
!!!DISCLAIMER!!!
MAY NOT WORK ON YOUR PHONE!!
MAY BRICK, BOOT-LOOP, FRY, CAUSE SELF AWARENESS!!
USE AT YOUR OWN RISK!!
TheDestroyer158-g2x 1.58GHz
TheDestroyer16-g2x 1.6GHz
TheDestroyer1.62-G2x 1.62GHz
The Destroyer1.66-G2x 1.66GHz
TheDestroyer1.7-G2x 1.7GHz
djvoleur's Harsh Based CM7 Kernels
THIS KERNEL REQUIRES SPECIAL INSTALLATION PROCEDURES, SUCH AS CWM 5.0.2.0! I STRONGLY SUGGEST READING UP ON THESE REQUIREMENTS IN djvoleur's THREAD.
CM7-3.0.41-0820-CS-OC
CM7-3.0.41-0820-LIN-OC
CM7-3.0.41-0821-CS-OC
CM7-3.0.41-0821-LIN-OC
CM7-3.0.41-0830-LIN-EASY-OC
CM7-3.0.41-0830-LIN-ALT-OC
Dragon CM7 Kernel
dragon-cm7-v152
Dragon is really old, and hasn't been updated, it can be risky, some new roms might not be compatible at all with it, and not as stable as other kernels.
Miscellaneous
My build.prop mod is available for download, and all information about it can be found in my G2x build.prop mod thread.
G2x build.prop mod DL
New Baseband fix by Owain, for people running the March 2012 baseband on older ROMs, NO BLUETOOTH CALL AUDIO, BLUETOOTH MEDIA AUDIO OK!
New Baseband Fix
Wanna know more about V6 Supercharger Tweak?
v6 supercharger
DankoFGL Quick Touchscreen Re-Calibration How-To
Touch Screen Re-Calibration
:good: :highfive: :victory: !!!!THANK YOU TO ALL MEMBERS WHO HAVE HELPED WITH THEIR SUGGESTIONS, REQUESTS, & CONTRIBUTIONS!!! :good: :highfive: :victory:
That will make it easy for anyone to find the kernel they are looking for. And for convenience the v6 supercharger link is here.
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Sent from my LG-G2x using XDA Developers app.
Aricrj said:
That will make it easy for anyone to find the kernel they are looking for. And for convenience the v6 supercharger link is here.
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
Sent from my LG-G2x using XDA Developers app.
Click to expand...
Click to collapse
Thank you. Will merge into the OP so it's not overlooked.
Please include the faux 048s under CM7 Kernels. It works well for some G2X devices, including mine.
Took me awhile to look for that kernel in another thread that is 400 pages long.
Thank you.
cody168 said:
Please include the faux 048s under CM7 Kernels. It works well for some G2X devices, including mine.
Took me awhile to look for that kernel in another thread that is 400 pages long.
Thank you.
Click to expand...
Click to collapse
Edited OP and done. Thank you for suggestion.
I knew there was a reason I keep all the old kernels and ROMs I have ever downloaded for my G2x. Links become dead or item is hard to find. I forgot about uploading 048. I actually used it longer than any other kernel.
justjackyl said:
Edited OP and done. Thank you for suggestion.
I knew there was a reason I keep all the old kernels and ROMs I have ever downloaded for my G2x. Links become dead or item is hard to find. I forgot about uploading 048. I actually used it longer than any other kernel.
Click to expand...
Click to collapse
Wish I could get this stickied. Bumped for someone.
justjackyl said:
Wish I could get this stickied. Bumped for someone.
Click to expand...
Click to collapse
If you want it stickied send a pm to veyka or naturist with a link to this thread requesting it be stickied.
Sent from my LG-P999 using xda app-developers app
There's a new version of faux kernel (054)
http://forum.xda-developers.com/showthread.php?t=1073626
Also, the v6 supercharger link is broken.
Thanks for making this!
helloha1 said:
There's a new version of faux kernel (054)
http://forum.xda-developers.com/showthread.php?t=1073626
Also, the v6 supercharger link is broken.
Thanks for making this!
Click to expand...
Click to collapse
Updated OP! Thanks!
Put in request for sticky for new members.
Sent via G2x on temasek b135.2 w/faux kernel v54
justjackyl said:
Put in request for sticky for new members.
Sent via G2x on temasek b135.2 w/faux kernel v54
Click to expand...
Click to collapse
Good! This needs to be. Thanks for doing this. Its nice to see people going the extra mile to help others.
thanks for this, very handy!
Why didn't you put ELP, ELPmax kernels from morfic along with his OC ones?
cricketAC said:
Why didn't you put ELP, ELPmax kernels from morfic along with his OC ones?
Click to expand...
Click to collapse
You mean to say the XLP right? Cuz the latest ELP was 06022012 or was there any other? One more thing. About battery life does ELP or XLP works better or the most recent OCd ones
Sent from my LG-P999 using Tapatalk 2
n30wav3 said:
You mean to say the XLP right? Cuz the latest ELP was 06022012 or was there any other? One more thing. About battery life does ELP or XLP works better or the most recent OCd ones
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
The elp aren't supported anymore but they work great, at least for me
Sent from my LG-P999 using xda app-developers app
helloha1 said:
The elp aren't supported anymore but they work great, at least for me
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Same for me... it still beats faux's in terms of battery life surprisingly. But I just wanna know if the newer ones were more battery friendly or just more power friendly (power in terms of speed)
Sent from my LG-P999 using Tapatalk 2
---------- Post added at 10:26 PM ---------- Previous post was at 10:16 PM ----------
Here you go the last morfics except the destroyers
http://www.derkernel.com/gb-p999-exp.html
Will be adding XLP too in a minute
Sent from my LG-P999 using Tapatalk 2
n30wav3 said:
You mean to say the XLP right? Cuz the latest ELP was 06022012 or was there any other? One more thing. About battery life does ELP or XLP works better or the most recent OCd ones
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
That too but I meant elp and elpmax.
Dunno about comparison but I find his kernels the best for cm 7. I usually UV my kernels
Sent from my LG-P999
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
helloha1 said:
The elp aren't supported anymore but they work great, at least for me
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
If by support you mean it's not being update morfic commented on it that he doesn't feel the need to fix what ain't broken.
Sent from my LG-P999
cricketAC said:
That too but I meant elp and elpmax.
Dunno about comparison but I find his kernels the best for cm 7. I usually UV my kernels
Sent from my LG-P999
---------- Post added at 10:33 PM ---------- Previous post was at 10:30 PM ----------
If by support you mean it's not being update morfic commented on it that he doesn't feel the need to fix what ain't broken.
Sent from my LG-P999
Click to expand...
Click to collapse
actually elp06022012 is the latest last elp kernel which is rocking .. and more rocking is the xlp = elpmax
http://goo.gl/NoYi
Sent from my LG-P999 using Tapatalk 2
Xlp is what he refers to cm 9 extra low power kernel.
Sent from my LG-P999
Originally I created this thread to showcase the CM7 and GB kernel lines. The reason I choose this is that I personally have used every kernel i uploaded. And thats the other point, I uploaded/mirrored these specifically as most new members are first time flashing this phone, so most tend to flash CM7/GB ROMs for stability. Alot of this older ROM material is getting buried/harder to find or the links are dead, and the latest has been government seizure of hosting servers.
That being said, if people want this to be a thread containing a collection of all kernels old and current i can change it up. I will need your help as i am a full time college student and work full time as well. Any kernel that you would like listed in the OP, please link me, or if you have it on your PC, PM me and send it as an attachment via email. Any kernel i list i want to upload /mirror that way i know the links are valid, and if for some unseen reason the current service im using for hosting gets caught up in a government seizure, i will be able to move everything to a second site more easily.
As always,open to suggestions and appreciative of your help.
We are a community.
Sent via G2x on temasek b135.2 w/faux kernel v54