Custom boot animation bricked my tablet? - Transformer TF300T Q&A, Help & Troubleshooting

Aight, so here's what happened, installed a custom boot animation, but it's in a loop, it keeps playing, cold boot doesn't work, recovery gives me the dead android, can't rly acces my tab in any way. The only thing I can do right now is getting it recognized as fastboot, everything else I tried results in my Hardware manager not even recognizing my tablet.
I got a rooted JB, not unlocked.
Rly got no idea what to do now, is it perma bricked or can I find a way out again?
Update: just left it bootlooping while I went for a spliff and voila, seems like it's done a factory reset or so
Looks like i lost EVERYTHING on the tablet but seems like it's working again, probably lost root etc though :/
Update 2: google is reinstalling all my apps now, gonna take a while
Update 3: at first looks, I still got root, rootchecker says I still have root, don't know what should happen with like ES file explorer if I don't have root but so far it all seems to work. Got it figured out what happened too, it wasn't a boot loop, it was just the custom animation that sorta ****ed up and kept rolling, I then started a recovery but didn't let it finish, so when I finally decided to stop tampering and just let the battery die out, it had enough time to actually finish that recovery.
Update 4: first reboot got me again, still the same animation, well, let's hope I still got root after next recovery, so I can fix that.
Update 5: all is good again, besides that everything from tab is gone, aah well, kinda wanted a fresh start with jb anyway

Related

Issues with recovery

Just bought my phone a couple of days ago, I was looking to root it as I had an Incredible but stepped up to this. Rooting went pretty good, failed first time but went through the second. Then I installed rom manager and flashed clockwork. I then went into the recovery but saw that I had an issue with with it about signatuire verification so I figured I still had the stock recovery. I went in and got the modded recovery file and just renamed the old one. Rebooted into recovery and the phone would lock at the samsung screen and not go anywhere. So i booted it back up like regular and flashed clockwork again and tried to boot into recovery again with the same issue but now I can't get the phone to boot up regularly. Its just hanging at the samsung screen, I have the battery pulled while I wait just to make sure its not an issue like that. Did I miss something when I was doing this? I watched the videos on how to root and install the recovery but I'm lost as to what is going on now. I thought my only issue was the stock recovery was still installed for some reason so I replaced that with the modded version. Thanks for you help and I hope I don't have to redo everything again.
Alright, delete this as I got inpatient and figured my phone was screwed anyways so I went ahead and used odin and I'm in clockwork right now. Sorry for creating a useless thread.

[Q] Bricked/Boot Loop Galaxy Note 10.1!!

Hello fellow XDA members! I am a Noob.
So I believe I have a Bricked Galaxy Note 10.1. Model GT-N8013
I Rooted Stock ROM, and flashed Collective Edition 5 Dark Side.
So heres what happened, everything seemed fine, until I made a mistake, I was Pimping my ROM with the PimpMyRom app. Every change seemed fine and my note worked, but when i saw the double boot screen slide in the app, i did what it said, i have the imf support or something like that. Then after i had the ''support'' needed, i clicked install button on the double boot slide, it seemed to do something and requested nothing, so i went ahead chose a second clip, and clicked set as second boot screen. It said it wont take effect until the 3rd boot, so i rebooted 3x, but at the third time, it was stuck at the boot screen with the galaxy note 10.1 logo ! It did not start or did anything, over time it would turn off and automatically reboot, but it would get stuck again !.
To attempt to fix it, I Booted into recovery (CWM) and did everything i could. I wiped nearly all cache, factory reseted, then out of fear, i flashed the stock firmware ROM from Sammobile website, with ODIN, and to my knowledge, it got worse!! It booted, seemed to do something then in the logo screen it got stuck once again!! Stock recovery says unable to mount /efs, i don't believe EFS is completely corrupted, I left it stuck for awhile and it shut down in like an hour. Help, what can i do to fix this!?!?!?!
Device cannot boot up.
I could boot into recovery and download mode only.
I thought that I too had bricked my 8013 the past weekend. Trying to do something that I shouldn't. It took me a bit of work and a lot of worry (my wife gave me my 8013 for Xmas and if I had to tell her that it was now a doorstop, she would have killed me). I used this method to get back to stock and then was able to work my way back to the ROM I use. I disremember in which order I Odin'd things, but in the end was able to un-brick. All I can say is give it a shot.
jusliloleme said:
I thought that I too had bricked my 8013 the past weekend. Trying to do something that I shouldn't. It took me a bit of work and a lot of worry (my wife gave me my 8013 for Xmas and if I had to tell her that it was now a doorstop, she would have killed me). I used this method to get back to stock and then was able to work my way back to the ROM I use. I disremember in which order I Odin'd things, but in the end was able to un-brick. All I can say is give it a shot.
Click to expand...
Click to collapse
i did what u said...but all i got is i able to get through the logo but without seeing anything only able to hear the sound. any other tip? i got the same problem as above.

[Q] Galaxy S2 Soft Bricked after root....

Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
addamT989 said:
Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
Click to expand...
Click to collapse
Try flash a stock firmware by using flashtool, it will work 100%:angel:
revernwe therefore
addamT989 said:
Hi everyone!! New here, but not new to Forums in general. I searched around and couldn't find my exact issue, so I figured I’d start a new thread. This is gonna be kinda long, but I wanna give as many details as I can to keep things accurate.
My wife and I both have the Galaxy S2 T989 (T-Mobile). Both purchased like new off eBay. When I got hers a couple months ago, as soon as I got it I factory reset and wiped the caches, upgraded to JB via Kies, and then turned right around and rooted it via Odin using the instructions found on galaxys2root.com. Everything went flawless, took me less than a half an hour total for everything. I got mine a couple months later and did the exact same process as soon as I got it in the mail. However after rooting on Odin and getting the green pass just like hers, it got stuck in a boot loop when it rebooted. It would go as far as the "galaxy S2" splash screen, and sometimes past that to where the Android takes off, then reboot, or freeze. It then became unresponsive to any button pushes and I had to pull the battery to get it to shut off (The battery is a new OEM Samsung battery incidentally). I ultimately had to unroot, re-install ICS and re-upgrade back to JB via Kies again to get out of the loop. I did this whole process 3 times to make sure it wasn’t something I did. So I’m still running unrooted with JB on it now.
The only thing I noted that was kinda odd was that when I open Rom Manager in my current non rooted state, it shows that I already have CWM and TWRP installed on it. Even though when I go to recovery mode it's the standard OEM Samsung menu. I never installed TWRP, and CWM was only on it for a bit when I was in the boot loop. Could this be my issue? Are they both still somewhere on my phone interfering with each other and I can only see them via ROM manager?
Sorry for such a long first post, and thanks in advance!
Click to expand...
Click to collapse
hi,
can 'be that your device has some residual old. Do as you have advised. install a stock rom and firmware, so it becomes a new cell phone. After odin starts TWRP (much better) and root.
I would flash a complete bone stock Rom using Odin and start over. Also rom manager was highly discouraged on the AT&T version of the s2 so I don't know what the stance is on T-Mobile's version
Sent from my CLEAN Note ll
brandonarev said:
I would flash a complete bone stock Rom using Odin and start over. Also rom manager was highly discouraged on the AT&T version of the s2 so I don't know what the stance is on T-Mobile's version
Sent from my CLEAN Note ll
Click to expand...
Click to collapse
Thanks for the advice! Should i flash it back to ICS then try to root again via Odin before i upgrade back to JB? I'm guessing there's something that isn't getting wiped. Since i can run CWM and Root with Odin without a hitch. it's the initial reboot after all that is done that I go into the boot loop.
tainiun rioters
pierm said:
hi,
can 'be that your device has some residual old. Do as you have advised. install a stock rom and firmware, so it becomes a new cell phone. After odin starts TWRP (much better) and root.
Click to expand...
Click to collapse
Sorry for my ignorrance, what exactly is TWRP, and is it now on there because i used Odin and it installed it automaticly? And do i want to use this vice CWM?
One more question...before i try all this, can i backup everything on Kies just like i would be able to with CWM and reinstall if my root fails again? I've only used Kies for firmware upgrade, never to reinstall a backed up copy of my phone.
Thanks!
addamT989 said:
Sorry for my ignorrance, what exactly is TWRP, and is it now on there because i used Odin and it installed it automaticly? And do i want to use this vice CWM?
Click to expand...
Click to collapse
addamT989 said:
One more question...before i try all this, can i backup everything on Kies just like i would be able to with CWM and reinstall if my root fails again? I've only used Kies for firmware upgrade, never to reinstall a backed up copy of my phone.
Thanks!
Click to expand...
Click to collapse
Hi
TWRP and the 'one touch recovery, better than CWM.
The backup kies can not recover from CWM
steps:
install odin, after recovery, nandroid backup, ROM, and root.
hi
Flash the stock firmware using odin!!..it will work!
Sent from my GT-N7100 using xda premium
freezes then booted
Hello I have this problem with my galaxy s2 i9100. After reboot the phone wasn't booting something like "boot loop" so I re flashed the firmware and now the phone boots up but after the boot it freezes immediately. So I decided to install clock work mod recovery and install cyanogen mode 11 with cyanogen mode the phone boots up and are able to be used again until the screen goes to sleep mode or the power button is pressed then the screen goes black and doesn't turn on after long pressing the power button it reboots. So I don't know what else to do I have tried kernels, operating systems re flashing reseting and nothing helps. No need to tel me to do resettings. Also my galaxy s2 i9100 chip has insane chip bug but I don't know if it has to do something with my problem.

[Q] Stuck on

So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
agentkalaw said:
So I decided to try to flash Zombie-Pop today and everything went fine during installation but when the tablet started booting up it was stuck on "android is starting.." and it seems to load the apps. I knew it would take a bit of time to stabilize so I let it run but after 1 hour of it stuck there, I tried to reboot into recovery but I get a black screen and I can't access TWRP. It just boots right back to the android is starting screen. It doesn't seem to be a boot loop since it finishes the boot sequence. My biggest problem is not being able to access recovery because of the black screen which apparently is happening to some people with TWRP. I tried to go through adb but since my tablet isn't done installing, it doesn't have the drivers to run adb. Is my tablet toast? bricked?
edit: apologies for the title. I must have deleted the text before posting.
Click to expand...
Click to collapse
Which bootloader are you on?
How are you trying to boot to recovery?

[Q] Soft bricked Zte grand x

Ok so, I've been researching for about 2 days now. Trying to figure out a way to fix my soft bricked phone, now the problem with the phone is that, before it was bricked I had rooted it with this program called Kongo Root, after it ended and what not, it seemed like the phone was rooted successfully, so I went on and went to the play store and decided to download Superuser(even though I already had one from the Kongo Root program) anyhow I installed this superuser, and it asked for root permission, I allowed it, and after it asked me to go to the recovery install, I said yes, and my phone restarted, now it is stuck in the screen where it is supposed to download something or update idk, but it just shows an android with the sphere or whatever it is on its stomach, and there's a percentage bar at the bottom, and it just shows a 0% and it does not go any further than that, I cannot access bootloader, and it seems like my PC won't recognise the phone either. Help please. Sorry if my explanation is not good enough, I typed this really fast, im just really desperate.

Categories

Resources