J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
The problem is that there is not enough power available from the audio amplifier. This can't be corrected with software.
What this .cab does is probably that it tries to increase the amplification beoynd the capabilities of the device. This may make the sound seem louder, but as you have noticed, it also increases distortion. There is no workaround for the laws of physics...
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
illi said:
So we are really really stuck with a very inferior product.
I installed SRSWOW but lost all sounds
Click to expand...
Click to collapse
Did you change the dll file in the registry so that if points at the right one? Its been written a couple of times the the SRSWOW cab going about set the wrong values in the reg. So I think this should be an easy fix if you do a bit of searching. Try the Daimond forums.
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
@WizP: I'll do a search for the fix.
@Taajuus: The sound must be decent enough....
Taajuus said:
Either this problem varies from device to device, or then Ijust dont understand how loud you guys need...
When my wife calls, she shouts so loud I even have to tone done volume
Click to expand...
Click to collapse
I have my volume set to the halfway mark. I'm talking about the conversation volume, only settable while in a call, not the system or ringer volumes.
Those that are reporting low volume, is it the ringer, system, or call volume you are complaining about? In other words, is it the front or the rear speaker that's producing low volume?
The ring volume is more than fine, it's just the speaker volume when in a call, when outsuide you can hardly hear it
Yes, I concur.
I've got my in call volume at maximum and you can still barely hear the other person.
Before you ask, I don't have a screen protector covering the earpiece.
I still wonder - I havent had any problems with incall voice. Can hear person very clearly even outside in traffic noise.
Could this really be single device problem, or maybe operator dependant?
With that audiopara file in my raphael (ROMeOS V.1.05) the speakerphone volume is now hugh,the music playback is loud, but a little disorted, but j think that there was no serious change in incoming ringtones (though j use only wav files-that are much louder from mp3's.
As far as the disortion a new modified audiopara file that suits well with Raphael should make the difference.
J will try some mods with SRSWOW..
Worked here... But the sound is VERY distorted..
Couldn't find a way around it with SRS (Tried treble reducer) and no luck.
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Mr.Sir said:
I can´t even here when I´m talking to somebody, but I still have that plastic over the earpiece but still! There´s NO sound at all through it (well really really low), I have max volume, will it get better with the screenprotecter that doesn´t block the small speaker?
Click to expand...
Click to collapse
REMOVE THAT. It's the same thing if I tried to yell to you with a wall in between us. Sound has difficulty traveling through a medium, specially a piece of plastic.
Dear Taajuus,
Could this really be single device problem
Click to expand...
Click to collapse
Well... yes sit can because:
1. There are several related problems that are not seen in all devices.
2. Not all Raphaels [Touch Pro] are the same model, make or version.
or maybe operator dependant
Click to expand...
Click to collapse
It can never be related to the operator because:
1. The operator's interaction with the device is the one of a comm carrier.
2. It's only possible influence would be with/thorough the radio, never the ROM.
3. The operator cannot directly interact with the hardware.
Cheers.
xenkato said:
J dont think that it is posted here,so from Diamond forum the file below makes Raphael sounds louder.Test it to mine & works, BUT it's a little disorted (with .wav files j use) ,maybe someone with enough knowledge fix it.
Media player now its loud, havent test it in incoming ringtones or bluetooth.
It doesnt sound well when SRSWOW is on.
Click to expand...
Click to collapse
how do you install this?
The sound is distored cause tripp modified the values of the gain but put it too high. If some one could put lower values it would be great. I tried but didn't manage . I also tried to put the values of the HTC NIKE but it resulted in a lower sound that the original one.
How to install audiopara (to 'ekerbuddyeker")
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
xenkato said:
Get in /Windows,search for audiopara3.csv, MAKE A BACKUP, use resco exp. and copy the new audiopara to /Windows, soft reset and done.
Click to expand...
Click to collapse
Ah, so that's how you install it ololol better write this on the first post...
Well for me this file really fixed the sound of my device, specially the earspeaker!! Now I have to lower the system sound so I don't get deft
I recommend everyone to use it...
So do u actually mean that this cab file has increased the volume on a call or just the general sound???
After I updated I5800 with I5800XWJPK (and later with I5800XWJPS) firmware... there is no sound at all. Sound icon in my notification bar "allows" only "Silent" and "Vibration"..
I checked all settings in "Settings"-"Sound"-"Volum"... but... there is no sound coming out of the phone.
But... if i plug in headphones... i can hear (in headphones) all sounds perfect as they should be without plugged in headphones!!
I rooted my phone, installed Kyrillos Rom (7.0 and upgraded to 7.1)... but... there is no sound.
Well... It will be rather strange to use my I5800 only with headphones from now on... so... guys... any help?!
Thanks in advance!
JMR
Anyone?!
Please.
Thanks.
It seems to be a hwadware problem
Flash back to the stock rom of your region - make it like just out of box(no root,mods,etc. ) and take it to a service center
One more thing
On homescreen, hold the vol. Up button and call yourself — from some other phone
Thanks for help.
No succes. I changed 5-6 different roms in last few hours. No sound at all. But.. there is, as always excellent sound if i plug in my headphones. So.. erm.. i doubt it is hardware problem.
Hi Gurus,
Sorry if this question has been posted earlier, I am pretty much a newbie here
I have just laid hands on a One plus one , and was totally bonkers over the device till yesterday. Strangely on attaching my headphones ( Skullcandy S2SBFY-058 Smokin Bud Mic In-the-ear Headset ) which where working absolutely fine the day before now force the music or notification sounds to mute :crying: The worse part is if it try to increase the sound , the drag-er ( if that's what its called ) runs back to zero. Its very frustrating and saddening. I have already tried re-booting and doing a factory reset. :crying:
Is here a fix for this ? Moreover can this be a software issue ? Any help will be really appreciated
Thanks in advance
Hi,
A couple of days ago I lost completely my mic during calls. (Other persons can not here me but i can. Even when i speak through speakers they can not here me)
Even the sound with my video's is gone.
But the strange thing is that when i tap my phone when my voice recorder app is on, it will detect the tapping but it will not record anything.
Can anybody help in this matter?
I use a ZP999 rooted, custom rom
update : the voice recorder did record something afterall.
When i put my headset in i can hear it clear.
I did pull out my headset and i now can hear the voice recording through my speakers which before didn't work.
I had some hope now the mic of my phone dialer should work but it didn't.
Can there be something wrong with my headset-input-jack which controls also the mic of my dialer???
Is it possible that my phone "thinks" there is still a headset inside so my mic won't work?
I remember i used some softtouch-pen which had on the other end a "jack"-like the usual headsets. But i remember it didn't fit the wright way.
It could possibely caused the harm.
Any way to override or fix this problem ???
Any help would be welcome.
i need a option or a app,that lets me disable the speaker, to avoid a phonecall to be shouted thru the room.
more simply, if you make a phonecall there is a small button to the right, that can be pressed and your whole phonecall gets on loudspeaker mode,i wanne block that darn button. cant happening that a whole hospital gets disturbed by such a call (didnt happen to me,but another person),iam happy with a function,a app,a apk.
bluetooth works,but only aslong as the earpiece has power,whats by far not a whole day.
cabled earpieces are not an option.
another thing the upper button bar with wifi bluetooth light etc.. is there a way to modify it?
1.change the selection of the first 6 to see,to something more useful
2.add another function,like usbselect(charge/data/other stuff),the function from dev sub
that are the biggest probs right now,not some for everyone,but maybe one has a clue to prob 1 or 2
thanks for reading