my English is poor,apologize
I have a tf300t(bought from US,I am a chinese),it isn't unlocked until update to stock JB(i update to 4.1.1from OTA,locked),but after unlocked,I flash the CWM 5.5.0.4,but it didn't work.Then i flash the TWRP 2.2.1.3 for JB only(http://forum.xda-developers.com/showthread.php?t=1843694),it worked.But after i flash the fireware "ASUS-ICS-HYDRO-PONIC"(http://forum.xda-developers.com/showthread.php?t=1750861),after reboot,the device hanged at the asus logo for a long time(i watched it for even 10 minutes.....),so i tried the stock rom(download from ASUS site,US_epad-user-9.4.3.30.zip)but it didn't word too.Now my tf300t can't boot to the OS,it only can get into the recovery(TWRP2.2.1.3 for JB).somebody help me......,I wonder if it is the update from OTA to cause my problem)
There are others in the same situation. Keep watch on this thread http://forum.xda-developers.com/showthread.php?p=30516010
And others. There should be a fix soon to downgrade back to ICS and start over. Hang in there and be patience. At least you can get into TWRP so there's still hope.
Sent from my Nexus S 4G using Tapatalk 2
DMardroid said:
There are others in the same situation. Keep watch on this thread http://forum.xda-developers.com/showthread.php?p=30516010
And others. There should be a fix soon to downgrade back to ICS and start over. Hang in there and be patience. At least you can get into TWRP so there's still hope.
Sent from my Nexus S 4G using Tapatalk 2
Click to expand...
Click to collapse
thanks a lot,i think i must be patient for a while.just like you said,i can get into TWRP,there is still hope.
jijitax4 said:
...it isn't unlocked until update to stock JB(i update to 4.1.1from OTA,locked),but after unlocked...
Click to expand...
Click to collapse
So you used unlock tool on JB, and it worked?
That's handy to know anyways...
mozyman said:
So you used unlock tool on JB, and it worked?
That's handy to know anyways...
Click to expand...
Click to collapse
yes it worked,my tf300t is unlocked,there is the word"this device is unlocked" on the asus logo screen.but it can't load os.
So I wonder if maybe you would have luck wiping and trying to install a jb based ROM like cm10? Since you're already on jb firmware its understandable that an ICS ROM fails... I'm by no means an expert but just someone considering an unlock after JB ota
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Looks like partition sizes chaged with the Asus update. I couldn't flash CM10 or any other rom as well (signature mismatch). If you installed the official 4.1.1 update, you need to manually install it again. Older versions and rollbacks wont work unless you push to some trickery mmcblk0p4, but that's another thread in itself
Download the JB update from Asus's website (if you still have it, that's fine) and extract the blob file. Put the blob file in teh same directory as your fastboot. Boot your TF300 into bootloader and enter:
fastboot -i 0x0B05 flash system blob
It will take a while to install, so be patient. Hope this helps
zeiroe said:
Looks like partition sizes chaged with the Asus update. I couldn't flash CM10 or any other rom as well (signature mismatch). If you installed the official 4.1.1 update, you need to manually install it again. Older versions and rollbacks wont work unless you push to some trickery mmcblk0p4, but that's another thread in itself
Download the JB update from Asus's website (if you still have it, that's fine) and extract the blob file. Put the blob file in teh same directory as your fastboot. Boot your TF300 into bootloader and enter:
fastboot -i 0x0B05 flash system blob
It will take a while to install, so be patient. Hope this helps
Click to expand...
Click to collapse
thanks a lot!!! it worked! i can enter the OS jb again!,thank you very much!Hope this can help others just like me.
but there is another question,can i flash other fireware like cm10 or downgrade the TF300T now?I do not like the JB OS,it is bed support on flash video.I need it.
jijitax4 said:
thanks a lot!!! it worked! i can enter the OS jb again!,thank you very much!Hope this can help others just like me.
but there is another question,can i flash other fireware like cm10 or downgrade the TF300T now?I do not like the JB OS,it is bed support on flash video.I need it.
Click to expand...
Click to collapse
Not yet. This fix is in the works. The new custom recoveries need to be modified for OTA JB first. Keep an eye on the development threads.
Sent from my Amazon Kindle Fire using Tapatalk 2
So if you put all these steps together...
1. Update to JB using OTA
2. Unlock
3. Flash TWRP
4. Flash extracted blob
You have an unlock/custom recovery method for those of us on JB am I correct?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
TheAdamizer said:
So if you put all these steps together...
1. Update to JB using OTA
2. Unlock
3. Flash TWRP
4. Flash extracted blob
You have an unlock/custom recovery method for those of us on JB am I correct?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
yes exactly! but you need flash the TWRP again after flash the extracted blob,or it will be the stock recovery.and then you can flash the ROOT.zip.So the device will be rootd.
Related
already rooted. is there a step by step to downgrade to ics. really miss my flash player. can't get it to work on jb.
There is not a way to downgrade at the moment if you are running the OTA JB.
Btw flash can still work with JB using the stock browser. Here's a copy of the recent flash player if you need it
https://www.box.com/shared/b58c065aae3988d53e04
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
DMardroid said:
There is not a way to downgrade at the moment if you are running the OTA JB.
Btw flash can still work with JB using the stock browser. Here's a copy of the recent flash player if you need it
https://www.box.com/shared/b58c065aae3988d53e04
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
I would think to truly do this, you would need to flash the bootloader, system, and recovery all at the same time so everything is in sync with ICS, just not worth it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
funnel71 said:
I would think to truly do this, you would need to flash the bootloader, system, and recovery all at the same time so everything is in sync with ICS, just not worth it.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Well, can't we just download the latest ICS factory image from Asus? Or would the bootloader prevent us from even using the factory ICS image?
naddie said:
Well, can't we just download the latest ICS factory image from Asus? Or would the bootloader prevent us from even using the factory ICS image?
Click to expand...
Click to collapse
When I was locked, I tried to take the zip and put it in internal storage. It installed the downgrade as it called it, but when done, I was still on jb. I would think if you're on jb and force flashed the ICS blob it would possibly brick the device because jb has different permissions and from what I've read a different partition table all together.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
funnel71 said:
When I was locked, I tried to take the zip and put it in internal storage. It installed the downgrade as it called it, but when done, I was still on jb. I would think if you're on jb and force flashed the ICS blob it would possibly brick the device because jb has different permissions and from what I've read a different partition table all together.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
I don't believe it has a different partition table but even if it did, asus blobs include the partition table in every update so that wouldn't be an issue, the issue however is that you cannot download the bootloader, the bootloader is now signed seperately to the rest of the update to prevent abuse like what we did with the tf201 to obtain nvflash access. When you unlock the bootloader signature remains enabled while the blob flashing signature check is disabled. This has a side effect of preventing downgrades as the bootloaders pre-JB do not have this same signing mechanism in place.
funnel71 said:
When I was locked, I tried to take the zip and put it in internal storage. It installed the downgrade as it called it, but when done, I was still on jb. I would think if you're on jb and force flashed the ICS blob it would possibly brick the device because jb has different permissions and from what I've read a different partition table all together.
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
I actually attempted to downgrade last night. Quite frankly, I think that I came close o a few soft bricks. I tried flashing a custom ICS rom...no go. I tried loading the firmware from the Asus website to the root of the SD card and restart...no go. I tried force flashing the firmware using recovery mode, and it completed "successfully." When I rebooted...no go...and no ROM. This is when I started getting worried, because when I tried to boot into recovery, I received a red error message saying that there was a mismatch. I hard rebooted again, and booted into recovery, and reflashed my JB Rom. I did everything BUT use fastboot to load an ICS recovery image. I didn't want to take that risk.
My suggestion....leave it alone. I am leaving it to the experts. And if you are not an expert, then LEAVE IT TO THEM TOO!
aarsyl said:
I actually attempted to downgrade last night. Quite frankly, I think that I came close o a few soft bricks. I tried flashing a custom ICS rom...no go. I tried loading the firmware from the Asus website to the root of the SD card and restart...no go. I tried force flashing the firmware using recovery mode, and it completed "successfully." When I rebooted...no go...and no ROM. This is when I started getting worried, because when I tried to boot into recovery, I received a red error message saying that there was a mismatch. I hard rebooted again, and booted into recovery, and reflashed my JB Rom. I did everything BUT use fastboot to load an ICS recovery image. I didn't want to take that risk.
My suggestion....leave it alone. I am leaving it to the experts. And if you are not an expert, then LEAVE IT TO THEM TOO!
Click to expand...
Click to collapse
Good suggestion haha - now I have been reading about nvflash being usable for the tf300, but only if you were on the ICS bootloader, wondering if you can do an nvflash type backup - don't know much about it - but after backup, upgrade to jb, then use backup to return to ICS...
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
I tried every method out there to get back to ICS. So there is no way. Tried fastboot, tried adb, tried wolfs downgrade method, tried restoring a backup with CWM and TWRP and many more. So unfortunately there is no way, but Scotts and Seanz Roms were the best Roms on ICS, so I think I dont have to, cause I have the best Roms to choose.
Only thing missing is NVflash and OC (its been working on )
Have you tried erasing everything
mikaole said:
I tried every method out there to get back to ICS. So there is no way. Tried fastboot, tried adb, tried wolfs downgrade method, tried restoring a backup with CWM and TWRP and many more. So unfortunately there is no way, but Scotts and Seanz Roms were the best Roms on ICS, so I think I dont have to, cause I have the best Roms to choose.
Only thing missing is NVflash and OC (its been working on )
Click to expand...
Click to collapse
I recently just restored my bricked Tf300 by using these commands from fastboot thanks to user Buster99
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adt-bundle\platform-tools\blob (this is my path - your's may vary depending where you stored your blob)
fastboot -i 0x0B05 reboot
this completely erased my system, fixed my bootloo and brought it back to stock. Can there be a way to erase the bootloader this way???
Link to how i recovered "http://forum.xda-developers.com/showthread.php?p=45386598#post45386598"
So I own an Asus TF300T and I'm using Jelly Bean [Rooted 4.1.1]
Here are my current problem's.
1) I am unable to get CWM to work on it as it will install correctly through Fastboot but when I reboot into Recovery it will hang t the RCK screen. I don't know how to fix this as I've tried a few different recovery images, all of which were CWM.
2) When transferring via Bluetooth to my Nexus 7 the TF300T will reboot for some reason... same thing happens when I'm sending files from my N7 to the TF300T. Any idea's as to why this would be happening?
3) I am unable to reset my device to stock, has anyone else had this problem?
4) I have minor time's where the device will just reboot because of what I assume to be the processor taking on to much of a load from the Android OS. Is there a fix for this problem?
Any answer's or solution's would be helpful. Every time I find what I think to be a fix doesn't work...
1) What bootloader are you running from? [Edit: Sorry, forgot you mentioned you are on Jelly Bean there -- You will need to make sure the CWM is JB compatible (again look at the link I posted here for the CWM JB Recovery)] If you are on the new JB bootloader you have to have CWM recovery that recognizes this. I don't use CWM on my TF300, but you might try HERE to find info on that. I do know that TWRP version 2.2.1 and higher have a JB bootloader version. You can find it from their site HERE.
2) No clue on the bluetooth. I don't use the bluetooth transfer so I haven't ever tried this out.
3) By "reset device to stock" do you mean the Factory Wipe Data option from the boot menu, or something else? Please explain and I'll do what I can to assist.
4) I've had my device reboot a time or two for no reason, but I don't know enough about debugging things in the software to know what's going on.
-Nate
Hey nate, thx for the reply, but by "Reset to Stock" I mean ou download the original stock image and re-flash the original firmware...
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Rykugen said:
Hey nate, thx for the reply, but by "Reset to Stock" I mean ou download the original stock image and re-flash the original firmware...
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
Click to expand...
Click to collapse
Being that you are already on the Jelly Bean bootloader, you cannot flash any firmware to working condition that is not a Jelly Bean bootloader. This means that you can only flash 10.4.2.9 or 10.4.2.13 firmware versions. Anything else won't boot on the JB Bootloader. Also, the ZIP file you might download from the ASUS site requires it to be unzipped first. There is another zip file inside of the downloaded file that is used for the actual flashing process.
-Nate
Yup I know that part...
Just confused as to the process of getting it done...
I have some experience in flashing new firmware but with the TF300T I'm so confused xD
Sent from my ASUS Transformer Pad TF300T using xda app-developers app
There isn't anything "rocket-sciencey" to flashing on the TF300. If you have ever done any type of ROM flashing, the returning to Stock is the exact same way, just using the stock firmware file downloaded from ASUS.com. Find the firmware you want to load, download and unzip the file to a YY_epad-X.X.X.X_2012xxxx.zip where the YY is your location code (US more than likely) and the X.X.X.X is the version of the firmware you are loading up. The xxxx should say "user" if memory serves correct. Put it on your MicroSD and flash it like you would any normal custom ROM. Wipe Data, Wipe Cache, Flash ROM, Wipe Dalvik, Reboot. I'd be happy to put together a more fluid tutorial on this if needed.
-Nate
I didn't see anything from US so I tried WW.....
Sent from my Nexus 7 using xda app-developers app
If you go to asus.com and click on United States, then go to the Tablets and the TF300 download section the only ones available should say US. But I think WW should work, no guarantees though.
I'll try that today thx...
I'll post back later
Sent from my Nexus 7 using xda app-developers app
[TWRP&CWM/Install JB OTA from custom recovery] Jelly Bean OTA for Unlocked Devices
Hi guys,as you may know,if you unlocked your bootloader you won't be able to receive OTA's anymore so you have to wait for Asus to upload the firmware on their site.Or even better you can use your custom recovery to flash a modified OTA pack wich will update your device just fine.
Warning:
** I'm NOT responsible for any damage caused to your device by using these files so use them on your OWN risk.
** This update will also flash the Jelly Bean bootloader so if you are still on .26 bootloader and you didn't used the NvFlash tool yet,well,it's time to do it because after installing this update there's NO WAY to go back,yet.
** You Custom Recovery will be replaced by the Stock Recovery (You can install this CWM Recovery after installing JB)
** I only tested with TWRP but it should work with CWM recovery too
** Verify your MD5 checsum after download
Requirements
* Your device must be unlocked and rooted
* You need to be on STOCK 9.4.5.30 ROM with no modifications to system files (build.prop,etc) (no need to do the Factory Reset)
* Use OTA RootKeeper before installing this update if you want to keep ROOT
Installation
1) Download the file for your specific SKU
2) Move the downloaded file on your internal or external storage
3) Boot your device in Recovery
4) Install the update / That's it,wait for the install proccess to finish
NOTE: If you are getting errors and you are using CWM recovery try renaming the file (i.e TF700T WW_10.4.4.16-20120927 OTA.zip - - > TF700T_ WW_10.4.4.16-20120927.zip)
Download Links
WW_SKU --- > TF700T WW_10.4.4.16-20120927 OTA.zip ----- MD5 checksum: 9d4e1e91a08254256357eb2870d2df7d
US_SKU --- > TF700T US_10.4.4.16-20120927 OTA.zip ----- MD5 checksum: 4131cab5458153856185c43e05b67ebe
great! just what i was waiting for...links works, started download. i will let you know how it goes. first i need to apply root and install custom recovery again... thanks!
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
No download
The download is not working for me either.
Edit: you missed a ":" after http
http://www.sendspace.com/file/d7lw1o
glenner05 said:
great! just what i was waiting for...links works, started download. i will let you know how it goes. first i need to apply root and install custom recovery again... thanks!
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Click to expand...
Click to collapse
can you do this for the US version as well? im itching to get JB loaded up on my Infinity.
Gonna test tonight as well. Won't expect any issues, but I'll tell the results here.
Download link fixed.Yes i'm uploading the US version right now.
May I ask why we need to be on stock prior to flashing?
Sent from my Transformer Pad TF700T
Itching for that US version too! Being Unlocked has never tasted so bitter until now!
Jbb3393 said:
May I ask why we need to be on stock prior to flashing?
Sent from my Transformer Pad TF700T
Click to expand...
Click to collapse
i think because this is not a complete rom. Its an update package. So if you gonna flash an official update over a custum rom your asking for trouble
Jbb3393 said:
May I ask why we need to be on stock prior to flashing?
Sent from my Transformer Pad TF700T
Click to expand...
Click to collapse
Because the update will fail to install if some system files are missing or beeing modified.Please don't try this on custom firmware,but if you do,just don't complain about it in case is failing or even worse.
Pretoriano80 said:
Download link fixed.Yes i'm uploading the US version right now.
Click to expand...
Click to collapse
Is the US version uploaded yet?
Jbb3393 said:
May I ask why we need to be on stock prior to flashing?
Sent from my Transformer Pad TF700T
Click to expand...
Click to collapse
Asus OTA updates aren't a complete replacement. Instead the update performs a patch to your existing files. A non-stock or non .30 version may cause a failure during the update process.
Truthfully if you're running an unlocked device you should wait for a ROM developer to make a new ROM and use that to update instead of trying to flash the Asus official update. It should only be 24 to 72 hours and a ROM won't do things like remove root or replace your custom recovery with the stock recovery.
Works 100% with CWM recovery!
Thanks a lot My friend!
I can also confirm, this method works! I`m on jelly bean now
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
Work great!
Thx!
Dees_Troy said:
Asus OTA updates aren't a complete replacement. Instead the update performs a patch to your existing files. A non-stock or non .30 version may cause a failure during the update process.
Truthfully if you're running an unlocked device you should wait for a ROM developer to make a new ROM and use that to update instead of trying to flash the Asus official update. It should only be 24 to 72 hours and a ROM won't do things like remove root or replace your custom recovery with the stock recovery.
Click to expand...
Click to collapse
Quoted for fiction
It's fine to flash if you are on stock .30. Replacing the recovery costs about 30 seconds, and replacing root on an unlocked device takes about 30 seconds as well. Then you can evaluate an Asus jb yourself before seeing a custom jb.
Sent from my One X using xda premium
anaviel said:
Is the US version uploaded yet?
Click to expand...
Click to collapse
Sorry guys,but something went wrong with the upload process so i had to start over...is at 20% now,let's hope this time will be ok.
ZaJules said:
Works 100% with CWM recovery!
Thanks a lot My friend!
Click to expand...
Click to collapse
Does you SD card show now?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Pretoriano80 said:
Sorry guys,but something went wrong with the upload process so i had to start over...is at 20% now,let's hope this time will be ok.
Click to expand...
Click to collapse
Oh dang, we better be verifying md5/sha1's! Best to be careful.
Thanks!
Sent from my One X using xda premium
Hey guys,
So I recently did the procedure to enable NVflash on my TF700, and flashed the AndroidRoot bootloader in the process (over my stock .26). Unfortunately, I forgot to make a backup of the bootloader before doing that.
My question is, is there any way I can get back to a stock .26 bootloader now? A bootloader image file I can download somewhere? I want to do so to get back to stock .26 firmware and then upgrade to stock Jellybean.
Thanks
I'm really curious as to *why* you'd want to do this... If you just want to get to Jelly Bean with the stock bootloader, you can download the full JB firmware from Asus now (it's a FULL install, not just an upgrade like the OTA was) - it will replace the bootloader as well.
I just can't think of any valid reason to revert to the .26 bootloader just to get to get back to the stock bootloader in order to upgrade to JellyBean/stock bootloader.
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
So can I just run the Jellybean installer to return my tablet to stock (keeping bootloader unlocked of course)?
By the way I have TWRP recovery. So I need to change to stock recovery first to run that file, right?
dark42 said:
So can I just run the Jellybean installer to return my tablet to stock (keeping bootloader unlocked of course)?
By the way I have TWRP recovery. So I need to change to stock recovery first to run that file, right?
Click to expand...
Click to collapse
Actually, just installing the stock JB image from Asus will replace your bootloader and your recovery, so no need to change to stock recovery first...
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
jtrosky said:
Actually, just installing the stock JB image from Asus will replace your bootloader and your recovery, so no need to change to stock recovery first...
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
But I can't find a way to run the ASUS update, since I have TWRP recovery (seems like it requires a stock recovery)... If I start the update from within Android, it just takes me to TWRP. How do I run the file?
Never mind, I just tried installing the ASUS update file from within TWRP, to my great surprise it worked! I thought it was going to brick my tablet, honestly (I have an NVflash backup so no worries). Well, I'm happy, thanks for your help, jtrosky.
I am having problems flashing Clean Inheritance Rom 4.1 and I believe my TWRP 2.4.4.0 may be the problem because it seems corrupted.
I followed the instructions on this thread. http://forum.xda-developers.com/showthread.php?t=2187982
So far I have been able to flash the patched twrp 2.4.4.0 and install the Asus stock 4.2.1 but every time I try to flash CROM 4.1 twrp will initiate updating partition and then it will just restart w/o warning to its home screen. I think that my twrp may be corrupted but i have used fastboot to repush the twrp multiple times and the asus stock 4.2.1 multiple times but this is not solving my issue. I see that fastboot has a erase command and wanted to know if i would use that to erase the recovery img completely and then try flashing twrp again to see if this resolves the issue or will the erase command brick my device? Also do I need to have my stock kernel for the CROM 4.1 to work? I am attaching screenshot of my tablet info, please let me know if more info is needed or if i need to upload a video of what is going on thanks.
have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
robgee789 said:
have you redownloaded twrp mate it might have been a dodgy download or maybe a bad download of cromi, or you could try installing cromi 4.0 first
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Thanks robgee for the response, I have tried downloading the twrp patch and crom 4.0 and 4.1 but I am still having the same issue. Is there a way to flash CROM 4.1 without using twrp?
Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....
What OS are you using?
xgrind said:
Hi Williams,
I'm also facing the same as you, and still searching for an answer. Tried flashing the SuperSU patch and my tablet is still not rooted.
Running the WW version. Wonder if anyone can help us....
Click to expand...
Click to collapse
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?
im using windows 7 but i dont know if that has anything to do with it
No, im using Windows 7
williams2657 said:
I am still having issues but I am using Windows 8. Are you using Windows 8 as well?
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Update! bump please help someone
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?
williams2657 said:
I am still having issues installing clean rom 4.1 but I noticed that if I keep selecting to flash the CROM 4.1 or 4.0 rom it will eventually initiate and let me choose the options and actually start flashing but once it says it is complete and i reboot it does not boot CROM just gets stuck at the asus boot screen. Then i must use fastboot to flash the stock android 4.2.1 to get the thing up and running and then twrp pretty much breaks after i use fastboot to flash teh android 4.2.1 blob file so I have to reflash the patched 2.4.4.0 again. I really do think the problem is with twrp because ever since this new 2.4.4.0 update i have been having issues i remember before twrp was a great utility but now it seems like it is a nightmare is there a way from me to try flashing crom 4.1 with clockwork mod yet?
Click to expand...
Click to collapse
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
I haven't tried that yet, I will try and let you know. Thanks for the response.
I did try to flash the SuperSU zip to root the stock rom. Able to flash in the SuperSU but still not rooted
evo bryan said:
as far as i know clockwork was not updated yet are you able to flash anything in twrp lets say a su zip on stock 4.2.1
Click to expand...
Click to collapse
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I was able to flash SuperSU as well
I was able to flash SuperSU and it was confirmed rooted with root checker. I still don't know why CleanROM will not work I have downloaded the ROM multiple times but it just refuses to flash is there something else I need to check in order to flash the rom or is TWRP partially broken where it can only flash very small simple files but not a complete custom rom?
I just downloaded the energy rom and tried to flash it do my device and ended up having the same issue. It says the rom has been flashed and completes but after reboot it is just stuck on Asus bootscreen and never boots into the OS. What the hell is going on
I think my bootloader is somehow screwed up because it can't boot any custom roms it can only boot the asus stock 4.2.1 when i flash the blob file using fastboot. Did i miss a step or something to allow the bootloader to boot custom roms
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
I'm using the WW version and has the same problem
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2
Update
robgee789 said:
I don't know if it makes a difference but I used the ww version so it might be worth trying that but not sure how much difference it will make but you never know
Sent from my ASUS Transformer Pad TF300T using Tapatalk HD
Click to expand...
Click to collapse
xgrind said:
I'm using the WW version and has the same problem
Sent from my iPhone using Tapatalk 2
Click to expand...
Click to collapse
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Hi William,
Hope to hear good news
williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2
williams2657 said:
So I was able to use the patched twrp 2.4.4.0 to flash energy rom custom stock rom after 2 attempts so now I finally have a custom rom on my tablet but I really want clean rom because I like that version more. I will try to reflash clean rom later and let you know how it goes.
Click to expand...
Click to collapse
any news and just so you know clean rom just got updated
Yesterday tried again,
Still no luck. Anyone can share the link to patched TWRP for me to try again?
evo bryan said:
any news and just so you know clean rom just got updated
Click to expand...
Click to collapse
Sent from my iPhone using Tapatalk 2