So I flashed ICS using touch recovery..I then tried flashing another ROM and some how I lost touch and went to basic cwm..ROM worked n
Which was Megatron..tablet eventually did a reboot to recovery and got stuck in a recovery loop. I was able to cold boot through rock..I tried flashing jb and now I get even cold boot..just stuck in recovery loop any suggestions
same as the other thread next to yours - what did you use to flash the rom after you flashed ICS?
try and see if you can get your Tf into apx mode when you connect it to your pc.......if you can then i would suggest looking at one of the tools to Nv flash a base rom and recovery and start again.
have a look HERE and remember to thank T.O.D if it gets you out the shizzle.
Related
I tried to flash CM7 onto my G2X and it is stuck on the boot with the LG logo and the blue lines in the background. I need to get past it. Also it wont boot into recovery mode. Thanks in advance for all and any help
Follow the instructions on this thread http://forum.xda-developers.com/showthread.php?t=1248644
Once you have gb 2.3.3 installed try to boot into recovery, if it doesn't work, flash recovery again (using nvflash of course, not through rom manager). Once you get CWM working, flash CM7 again.
My tablet recently froze when i was not able to turn off my wifi in the settings of my Revolution 3.1 ROM. I have tried to boot up since this and now it is stuck on the ASUS boot screen with the circle.
I am able to boot to cwm 3.2.0.1 and wipe data/flash the rom again, but no matter what I do, it is stuck on the same screen.
I recently tried doing a cold boot and a factory reset/wipe data in the recovery menu, but when i choose to wipe data, after it loads the recovery kernal image, all i get is the android triangle.
What else can I try?
I have the same problem with my TF101. Are you able to find a solution to your problem.
shutchins said:
My tablet recently froze when i was not able to turn off my wifi in the settings of my Revolution 3.1 ROM. I have tried to boot up since this and now it is stuck on the ASUS boot screen with the circle.
I am able to boot to cwm 3.2.0.1 and wipe data/flash the rom again, but no matter what I do, it is stuck on the same screen.
I recently tried doing a cold boot and a factory reset/wipe data in the recovery menu, but when i choose to wipe data, after it loads the recovery kernal image, all i get is the android triangle.
What else can I try?
Click to expand...
Click to collapse
Maybe a problem in kernel or /system partition, try to flash the ROM again may fix the problem.
Same......
tingtan said:
Maybe a problem in kernel or /system partition, try to flash the ROM again may fix the problem.
Click to expand...
Click to collapse
I have the same problem.....
I rooted, installed Rom Manager to get CWM Recovery installed and then flashed the new CyanogenMod 10 - B1 ♦ K.A.T. As soon as I restarted, after it appeared that the flash went fine, it hung at the boot screen - not frozen just wont go any further.
I tried rebooting by holding the power button, I tried re-flashing both the CY 10 and the original Rom and tried "restoring" my backed up rom.
I have tried recovering through Easy Flasher but I don't think my PC is seeing the transformer properly.
I have ADB drivers installed but because the TF dose not boot properly it dose not seem to get there.
I have let the battery drain as some report a resolve when they get it to power down all the way but as soon as I plug it in and power it up it goes back to the boot screen and stays there.
Please help as I cant afford to lose this pad (yes I knew the risks).
Chaos-sa said:
I have the same problem.....
I rooted, installed Rom Manager to get CWM Recovery installed and then flashed the new CyanogenMod 10 - B1 ♦ K.A.T. As soon as I restarted, after it appeared that the flash went fine, it hung at the boot screen - not frozen just wont go any further.
I tried rebooting by holding the power button, I tried re-flashing both the CY 10 and the original Rom and tried "restoring" my backed up rom.
I have tried recovering through Easy Flasher but I don't think my PC is seeing the transformer properly.
I have ADB drivers installed but because the TF dose not boot properly it dose not seem to get there.
I have let the battery drain as some report a resolve when they get it to power down all the way but as soon as I plug it in and power it up it goes back to the boot screen and stays there.
Please help as I cant afford to lose this pad (yes I knew the risks).
Click to expand...
Click to collapse
Same issue, I can't get my computer to recognize the tablet to push any files to it, and I can't mount it from TWRP. What can I do?
Have you guys tried wiping out before flashing? Wipe out the cache,system, and all other partitions.
Hi, hope someone can help out with this.
I originally tried to flash a ROM to my phone that was not for the I727, and the flash failed, so I decided to recover to stock. I followed (carefully) the steps to recover to stock and eventually got Odin to flash the stock ROM. I was unable to flash the ROMs from the links provided, but when I tried the K0nane link, it PASSed. But, after doing that I cannot boot into recovery, and when I turn the phone on it's stuck at the splash screen.
I can still get into download mode and Odin recognizes the phone, and I can flash the K0nane ROM, and I've done that a few times now with the same result.
Where do I go from here?
-UPDATE - I just tried again...was able to flash the K0nane rom through Odin. When Odin rebooted the phone it just stays on the splash screen. I waited last time for 20-30 minutes, with no change. Hoping I did not mess up the phone beyond recovery.
Pull battery, boot into recovery, factory reset.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Like I mentioned, I can't boot into recovery. It shows the 'Galaxy' text screen, then just goes black instead of going into recovery.
I think I\m on the way now. One thing in the troubleshooting list I hadn't tried.....try it on a different computer. Tried it on my Windows 7 laptop and it worked. Now going to try again to install cwm and custom rom.
So i got a new T F 300T yesterday and wanted to root it today.
I unlocked it and rooted it successfully. But then I tried installing a recovery. Installed CWM using fastboot. tried booting into it using RCK. It says booting into recovery mode and just reboots to OS. Installed CMW touch, same problem. Installed TRWP since i read that cmw has some problems.Now i used the 1 click root 1.1 to boot into recovery mode. The device now keeps rebooting. IT starts on the asus screen, then reboots again. So im stuck in a boot loop. When I press vlm dwn +power, it doesnt give me a menu anymore , instead it says that its rebooting into recovery mode and reboots again. Im freaking out right now, anyway to recover my device? Or is it 400 bucks down the dran? I dunno why this happened , since i am not new to flashing ROMs and stuff, and ususally test out new ROMs using my GNex. Any help would be appreciated, thanks.
Hey guys,
I recently rooted my Galaxy Tab 2 P3110 , then installed CWM, and then went on to install the Cyanogen Mod 10.1.3. Installation was succesful .I then used the tablet for about 5-6 hrs before i restarted it. Now the tablet is stuck showing the Cyanogen logo. I have waited for an hour and still nothing happened.
When i tried to enter the CWM recovery mode, i end up getting the ODIN screen or the stock recovery mode.
Any ideas as to how i can resolve this issue.
Thanks in advance
Does it bootloop or just stick at boot animation?
If it's stuck at animation you may be able to adb push recovery.
sent using logic and reason from a device forged of witchcraft.
tokenpoke said:
Does it bootloop or just stick at boot animation?
If it's stuck at animation you may be able to adb push recovery.
sent using logic and reason from a device forged of witchcraft.
Click to expand...
Click to collapse
It just stuck at animation.
I don't know the Windows process of an adb flash of recovery.
You can also try to flash it with odin
sent using logic and reason from a device forged of witchcraft.
tokenpoke said:
I don't know the Windows process of an adb flash of recovery.
You can also try to flash it with odin
sent using logic and reason from a device forged of witchcraft.
Click to expand...
Click to collapse
I tried the ODIN method. I first downloaded the stock rom and then used ODIN to flash it. It says Pass in the ODIN App but when the device reboots, i still get the cyanogen logo which goes on forever..!!
I had the same issue with being stuck at the cyanogenmod boot animation. I went back into recovery, did a wipe data/factory reset. Once I did that, I flashed the .zip file from my sdcard and it worked fine. As far as your installation of CWM, you must have not installed it correctly. I use Philz Touch Recovery for my P5113.