Haven't decided whether to flash a new ROM, but I wanted CWM recovery so I could wipe battery stats to improve battery performance like I did on my MyTouch 3g. I rooted my Galaxy S 4g and followed the "[RECOVERY]CWM FINAL for the SGS4G" instructions exactly. I downloaded the recovery file and used File Expert to place it in the /system/bin folder. I didn't delete anything (I DID save a copy of the original file), just let it overwrite. I downloaded the update.zip file and placed it in the root of my SD card.
I rebooted and now I can only get to the splash screen, whether I just power it up or hold down both volume buttons and the power button to try to get into recovery. I can get into download mode so I downloaded Odin and it recognizes my phone. I'm pretty sure I can restore from here and will look for instructions on the site, but I would rather just restore the original recovery file first (if it's possible) to see if that works.
Question: Can I use Odin to restore just the original recovery file? If not, is there another way it can be done considering that I can only get into download mode?
You can't (to my knowledge) use ODIN to deal with individual files like that. You could download the android SDK from www.android.com, install it, install only the 'tools' module (else you download and install all of the different sdk versions for the platform as well as other stuff), and use adb to move the file back into place.
I'm sure someone here probably has a mo-better way, though.
I was spending too much time on this so I decided to flash another ROM. GB ROMs gave me the rainbow bootloop so I flashed stock FROYO (thanks, krylon360) successfully. I'll worry about GB, rainbows, and bootloaders later when I have more time, but I still want CWM recovery. Any ideas as to why it didn't work (see OP)?
To get rid of rainbow screen just odin the kg4 leak. Then Odin one of Dr honks gb kernels to get cwm.
Sent from my SGH-T959V using xda premium
GB ROMs will do that if you don't first flash one with the correct boot loaders. KG4 was the first GB ROM to have the right ones.
I'm not sure what happened with your initial attempt to get CWM working, though. I've never attempted it that way; I've always flashed one of drhonk's GB kernels.
As everyone knows Stock ROM ICS 4.0.4 prevents a custom recovery from persisting after a reboot, it just returns to stock, ive experienced this using ODIN, however I think i found a workaround using mobile odin pro, the basic version should work too....
what i did was flash the cwm recovery using mobile odin pro rather than ODIN on the computer, and cwm didnt remove itself after a reboot, i did however update to the newest 4.0.4 Stock ICS the UEBLH3 version recently, not sure if this works in the prior versions but its worth testing
disable reboot , and rreboot to recovery directly fom download-mode !
that was problem on 5100 ! hope it helps
I do know that sometimes there's a script under /system/etc called install-recovery.sh that runs and reflashes stock recovery before Android is fully loaded. If you delete this or just make it 0 bytes, it won't run and volia, no more stock ROM eating your custom recovery!
That's what was on my Iconia Tab - it kept eating my TWRP2 that I installed on it.
i see this firmware in this post http://forum.xda-developers.com/showthread.php?t=2074458
how install in my tab p3113 please
i need root or clockworkmod recovery i dont know
sorry for my english i speak spanish
Dear baby tab owner..........
The instructions are clearly included in the thread you posted. There are tutorials in the general and development sections. Please read.
DigitalMD said:
Dear baby tab owner..........
The instructions are clearly included in the thread you posted. There are tutorials in the general and development sections. Please read.
Click to expand...
Click to collapse
no, my question is if I need to install the recovery or I can use the recovery that brings the tablet without root or other recovery
if you're installingnstock Samsung firmware, or those leaked OTAs, you only need stock recovery, i'd advise you to odin flash the UK 4.1.1 version for the 3110 instead, those OTAs are unstable and odd, the first 4.1.1 ota boots and gives wifi and autobrightness issues, the latest 4.1.1 ota does not go past the tab 2 bootscreen, I'm running the uk 4.1.1 for the 3110 from Sammobile on my P3113, overall, everything works smooth.
Sent from my GT-P3110 using XDA Premium HD app
those are test firmwares, and if arent sure how to install them then perhaps you shouldnt. if there is a problem you are gonna have a hard time fixing it.
RESOLVED: the ODIN flash did work once i got the right tar file.
I tried flashing one of those firmwares for 4.1.1 which was only 357 MB and it got stuck at the boot screen, It seems I had bad instructions I followed with a link to an incomplete flash file, perhaps part 1 of a 2 part download. When it flashed it last said it was updating remaining files and then went back to the recovery, When I rebooted it stuck at the recovery even after a data wipe. I tried flashing a 3113 rooted stock rom and it gives me an E:signature verification failed. I used odin to flash the 4.04 stock rom which passes, but it still freezes at the boot screen even after a data wipe. Should I try flashing CWM recovery through odin to get around the signature verification or does someone know another procedure that has worked to get back to stock 4.04 from this condition. I have seen this mentioned a couple of times in the development threads with users indicating that they got back to stock, but without details of exactly how.
The firmware I apparently partially flashed was GT-P3113_P3113UECLI4-OTA-P3113UEBLH2_XAR_374372839
Also I was not able to see if usb debugging was enabled since I could not do anything but recovery or download modes on the tablet.
EASY... relatively speaking.
I read XDA forums for hours and hours... and hours. Seriously. I spent about 20 hours reading XDA just for this. All the info is out there, but it is spread out across a dozen different threads, and multiple posts within those threads.
When I actually went through the process, I had (no lie) eighteen windows open, each with a relevant thread/post.
Sheesh, and people think this is complicated... [/s]
But in the end - I have a custom Lollipop ROM on my phone (Goldeneye v53) and it is working beautifully. And I had NO issues with the process, it all went smoothly.
The phone (which previously was starting to run out of space, lag, and just all-around felt "old") is now like new. And, dare I say... better than a stock S6? It is certainly leaner and meaner than a stock system (that's a good thing - I despise all the bloat on stock systems)
So, to make it easier for all those who come behind me, here is how to do it. In 39 easy steps.
One post.
One list.
Bullet points.
Links.
EASY.
Do this EXACTLY - and you will have a custom ROM on your S4.
Do something "just a little" different... Or miss a step... I'm pretty sure your device will explode, or at least catch on fire.
Either way, there is no express or implied warranty on this process I have collected and posted here. Anything you choose to do to your device is on you, and if something goes wrong, I accept no liability.
For risk mitigation in my case (as I'm an overly anal type) - I made sure that I dug my previous phone out of the closet, charged the battery, installed my SIM, and confirmed that I could use the old phone to at least make calls/texts in the event that "something" happened to my S4 during the upgrade process and I had to go to work the next day without my S4. Everything went smoothly, but IMO you should definitely have a contingency plan just in case.
Note - this is only for those NOT on MDB or MDL bootloaders. You guys have it easy. Don't do all the crap below - you don't need to, and if you DO do it, you are locked into this "complicated" method FOREVER (mwa-ha-haaa!!!)
1. Preparation
1.1 READ THROUGH THIS POST 27 TIMES (NO LESS, NO MORE) AND MAKE SURE YOU "GET IT". IF NECESSARY, READ THE THREADS LINKED THROUGHOUT THIS POST. <<< THIS IS THE SINGLE MOST IMPORTANT PART OF THE PROCESS. IF YOU JUST READ THE FIRST FEW STEPS AND START FLASHING CRAP, YOU ARE GOING TO F SOMETHING UP. READ IT ALL, UNDERSTAND IT, THEN DO IT. I CAN'T EMPHASIZE THIS ENOUGH.
1.2 Backup. Back your stuff up. Back it all up - ALL of it. Understand that whatever you do not back up now, YOU WILL LOSE. This process is going to wipe your device clean. Anything you want to save, you need to back it up now.
1.2.1 Do not use Titanium Backup - for anything. It will F your stuff up. Which is unfortunate, because TB is a great app that is incredibly useful - just not this time. Apparently TB has issues when migrating form one version of Android to another (i.e. 4.x.x to 5.x.x). Sorry, but you gotta do it manually.
1.2.2 Copy your pics/vids to your PC
1.2.3 Use "SMS Backup& Restore" from the Play store
1.2.4 Let Google sync your contacts and calendar.
1.2.5 Any apps that store your data locally (not sync'd to their server) - manually find it (I like ES File Explorer) and copy it to your PC if you care about it.
All of that said - I found that wiping my device and migrating to Lollipop was a GREAT way to clean a bunch of useless crap I no longer needed off of my phone.
2. Rooting and Flashing STOCK KitKat (4.4.2) ROM (relevant thread - see post #2, under the "NB1 - KitKat 4.4.2 > Option 2" section.
Note: The reason you have to do this is because you must have rooted Lollipop on your device in order to flash custom Lollipop ROMS. If you just want stock, non-rooted Lollipop maybe you COULD just use Odin to flash Lollipop directly? But there is no way to get root on Lollipop directly - and you must be rooted if you want to wind up with a custom ROM. So you have to do this intermediate step of flashing and rooting a 4.4.x or higher OS. This version of NB1 is easiest because you can use Odin to flash a ROOTABLE ROM which makes the root process simple with Towelroot.
2.1 Download Odin v3.09 here. Place on PC.
2.2 Download ROOTABLE NB1 ROM here. Place on PC.
2.3 Download towelroot v3 here. Place on PC and copy to device (likely your SD card).
2.4 Use Odin to flash ROOTABLE NB1 ROM to your device. When the phone boots up, just speed through the "initial setup" screens, it doesn't matter since you're going to install a couple more ROMs before the finished product.
2.5 Go to settings>more>security and check "unknown apps", and uncheck "verify sources".
2.5 Navigate to towelroot v3, and install it.
2.6 Open towelroot and click the "make it rain" button.
Congrats, you are now rooted on KitKat NB1.
3. Upgrading to ROOTED STOCK OC3 (Lollipop) using "keep root" method (relevant thread)
As mentioned, this process takes you from ROOTED NB1 (KitKat, 4.4.x) to OC3 (Lollipop, 5.x.x). The only way to get rooted OC3 is to first get root in any 4.4.x version or higher and then upgrade to OC3 using the "keep root" method. There is (as of this writing) no way to root OC3 Lollipop directly. "keep root" reference thread - post #1
3.1 Download Flashfire app using below steps. (no direct link available).
3.1.1 Join the G+ community using the same Google account as you're using for Play on your phone/tablet Here.
3.1.2 Sign up to receive the BETA versions from Play Here.
3.1.3 Use the link provided after sign-up to download the app. Note - the link was not immediately available for me, and apparently that is normal. (There was a link, but it told me something like "link not found" when I tried to access it at first.) I had to sign up, and then 30 minutes later I went back and had access to the Flashfire file.
3.2 Download I337_OC3_Stock_Rooted_ROM here.
3.3 Place ROM on SD card.
3.4 Use Flashfire to flash ROM (see "keep root" reference thread from above for specific details of using Flashfire)
Congrats, you are now on rooted (stock) Lollipop.
4. Install your CUSTOM Lollipop ROM
4.1 Download ROM and prepare Safestrap recovery
4.1.1 Download your chosen ROM. I chose Goldeneye v53 here. (I chose Goldeneye because after brief reading, Goldeneye seemed to be one of the more stable options, and stability is what I wanted when going through this the first time.) Place it on your SD card. Here are other options for Lollipop custom ROMs on AT&T GS4. If you happen to wander into the development section and see all the shiny, new, intriguing ROMs floating around, keep in mind that most of them won't work for the AT&T GS4. Any custom ROM on this device must be based on Touchwiz and setup to be compatible with safestrap - only a handful meet those criteria.
4.1.2 Download Safestrap v3.75 here. Place it on your SD card. Do not install it at this point, Safestrap is currently not compatible with Lollipop - you are going to flash a different Kernel in Step 4.2 to work around this.
4.1.3 Download BusyBox from Play store
4.1.4 Install BusyBox on your device.
4.1.5 Install Safestap 3.75
4.1.6 Open Safestrap
4.1.7 I did not do this step because I did not start this process with any previous version of SS on my phone. But if you did have a previous SS recovery installed, use the Safestrap to "uninstall" the previous recovery version. It is my understanding that you can't install v3.75 on top of another version, you need to first remove the old version before installing the new version. The "uninstall" option is done from within the SS app, not the Android application manager - you are uninstalling the custom recovery, not the SS app.
4.1.8 "Install Recovery" (from within Safestrap). NOTE: this only INSTALLS safestrap, it does not boot you into safestrap recovery. There is no need to go into safestrap recovery yet. That's later.
4.2 Flash NC1 Kernel
As mentioned above, you need to flash the NC1 Kernel so that you can do your thing in Safestrap. But then you MUST remember to reflash the OC3 Kernel after using Safestrap to install the ROM, or else your phone will explode (probably).
4.2.1 Download NC1 flasher app from here. Place it on your SD card.
4.2.2 Download I337_stock_OC3_kernel_recovery_flashable from here. Place it on your SD card.
4.2.3 Download OC3 modules from here. Place it on your SD card.
4.2.4 Open NC1 flasher app and press "flash" (it's the only button)
4.2.5 Wait for completion and press reboot. NOW you will get automatically rebooted into safestrap recovery.
4.3 Install your custom ROM!!!
(note: all the below is done in safestrap recovery)
4.3.1 Go to "Wipe" and perform factory reset (will wipe system data, cache, and dalvik)
4.3.2 Flash your ROM. For Goldeneye ROM, it uses the AROMA installer. Choose the options that you like, but make sure to READ THEM ALL BEFORE SELECTING ANYTHING - IF ONE OF THE OPTIONS MENTIONS AT&T/SAFESTRAP, YOU MUST CHOOSE THAT OPTION. HELLFIRE, BRIMSTONE, AND ETERNAL DAMNATION WILL AWAIT YOU IF YOU CHOOSE ANOTHER OPTION.
4.3.3 At the end of the ROM installation, uncheck the "reboot now" option and continue - it will send you back to safestrap.
4.3.4 From within SS, install the OC3 modules from your SD card.
4.3.5 From within SS, install the I337_Stock_OC3_kernel_recovery_flashable from your SD card.
4.3.6 Reboot > system
4.3.7 Keep hitting "continue" when you get the safestrap recovery screen. This is a symptom of Lollipop not being compatible with Safestrap. Hit "continue" repeatedly (like 4 or 5 times) and eventually you will get into your ROM.
4.3.8 (Optional) Install safestrap.apk (that you d/l to your SD card) to your phone, and then use it to UNINSTALL recovery. This will avoid the above step 4.3.7 happening every time you reboot your phone.
Congrats, you now have a custom Lollipop ROM running on your device.
Note: SuperSU is finicky on Lollipop. See this thread for how to manipulate SuperSU to get your root apps working.
.
.
.
.
See? EASY.
Safestrap never works. I always select recovery when its powering on and it just powers up normally and takes me to my lockscreen. I installed safestrap using the apk, im already rooted on stock lollipop.
Israelsalinas19 said:
Safestrap never works. I always select recovery when its powering on and it just powers up normally and takes me to my lockscreen. I installed safestrap using the apk, im already rooted on stock lollipop.
Click to expand...
Click to collapse
You probably missed the step where he said to flash the nc1 kernel.
Yup, safestrap is known to be not fully compatible with OC3, that's why you have to flash the NC1 kernel in order to be able to use SS to flash your custom ROM. Don't forget to flash back to the OC3 kernel though, as stated in step 4.3.4.
Bootloops everytime. Flash kernels and modules after rom..reboot, samsumg custom screen then safestrap then 10 seconds later back to custom screen. After flashing kernels and modules I'm still able to get into recovery, nc1 should be gone in order for ss to work. I'm so sick of odin... :what:
Sent from my sghi337 on oc3
robot_head said:
Bootloops everytime. Flash kernels and modules after rom..reboot, samsumg custom screen then safestrap then 10 seconds later back to custom screen. After flashing kernels and modules I'm still able to get into recovery, nc1 should be gone in order for ss to work. I'm so sick of odin... :what:
Sent from my sghi337 on oc3
Click to expand...
Click to collapse
So you got all the way to step 4.3.6 successfully, it sounds like? And now you are just getting the Safestrap screen - where you can either "continue" or "recovery"? How many times did you hit "continue" and go through the "bootloop" (if any)?
After step 4.3.6, when you boot into your custom ROM, you will have the Safestrap screen pop up several times (like, at least four or five) - keep hitting "continue" and you will eventually get into the ROM. This is another symptom of Lollipop not being fully compatible with Safestrap.
I did not put that detail in the writeup. Very sorry it caused you issues. I am updating with that info now.
I must of not been patient enough, with so many failed rom installs with this locked bootloader i just odin'd back to nb1 to get to oc3... Any custom recovery would be such a relief as ss acts wonkey in lollipop, and flashfire isn't accessible if you're caught in a bootloop or the radical "att unauthorized software". Thanks for the help
Sent from my sghi337 on oc3
Update:
So once again I follow the instructions completely to the t
After I flash the ROM and the kernel and the modules and I reboot I get the Samsung custom screen then to safe strap then 20 seconds reboots to Samsung Galaxy s4 screen then safestrap then again to the Samsung Galaxy s4 screen with reboot to recovery again and this time it puts me into stock recovery no safestrap after rebooting system each time from recovery. It does the same thing and eventually i end up at the system recovery... I've tried this about 11 times, with no success to boot into the ROM
Sent from my sghi337 on oc3
robot_head said:
Update:
So once again I follow the instructions completely to the t
After I flash the ROM and the kernel and the modules and I reboot I get the Samsung custom screen then to safe strap then 20 seconds reboots to Samsung Galaxy s4 screen then safestrap then again to the Samsung Galaxy s4 screen with reboot to recovery again and this time it puts me into stock recovery no safestrap after rebooting system each time from recovery. It does the same thing and eventually i end up at the system recovery... I've tried this about 11 times, with no success to boot into the ROM
Sent from my sghi337 on oc3
Click to expand...
Click to collapse
Did you try wiping data/cache in the stock system recovery?
Yes wiped with system recovery and safestrap. This is an issue of flashing the oc3 kernels and modules with safestrap. I think.....
sent from my sghi337 on oc3
Read through your tutorial, very nice. ?The only thing I noticed is you flash the kernel before the modules. I think flashing the kernel should be the very last step before rebooting, I'm not sure it matters, but it might. Also when the phone is booting I never touch any buttons (continue or recovery) just let it work through the screens on it's own.
Thanks, Cats_PJs - I will edit the OP to indicate flashing the modules before the kernel. I didn't see such a recommendation to flash one or the other first in my research, and I honestly can't remember now which I flashed first. But I will update the OP to recommend flashing the kernel last, just in case.
If I'm safestrap'd and rooted on a custom 4.x.x ROM, should I flash to rootable NB1 per step 2.2 then start here with step 3? Thanks for compiling all this, I chuckled at the 18 pages open comment. I know that pain.
What version are you running now? If you already have root on a KitKat 4.4.x or higher ROM, you should be able to go straight to rooted Lollipop using the muniz_ri keep root method method here. (see the very first line of the linked reference post.) So if you meet that criteria, you could start in Step 3.
If you're on a lower build, you'll want to just start with step 2 and flash NB1 via Odin. I believe that you will need to uninstall your current version of safestrap at some point to be able to install the required v3.75.
So I have an update I finally found that sometimes safestrap won't flash the kernel so you have to Odin it even if its downgrading the kernel or upgrading. I've been able to flash any lollipop rom since I've been doing the Odin method for the kernels you still have to safestrap your ROM though. In another thread it said to flash the OC3 partition which I didn't find necessary and when I did try to flash them Odin kept failing therefore it wasn't required you must also flash the module with safestrap right after you do your rom unless you have your modules in a tar file then just do it via Odin. So to go over it one more time... you have to be able to use safestrap so if you were on lollipop you must downgrade your kernel (via odin or nc1 flasher) then you can use safestrap to flash your ROM and flash your oc3 modules then reboot into download mode and use Odin to flash your oc3 kernel(sometimes it will fail,just try again, i hold my phone gently to comfort it through the process) and it boots up going through the safestrap screen at least 4 to 5 times.
Confirmed to work. ..
Goldeneye
Imperium
Car hd
I'll be testing all the compatible lollipop roms for my device it's exciting I can finally flash roms thank you for this tutorial for heading me in the right direction.
:thumbup::thumbup:
Sent from my GT-I9505 using XDA Free mobile app
robot_head said:
So I have an update
I finally found that sometimes safestrap won't flash the kernel so you have to Odin it even if its downgrading the kernel or upgrading.
I've been able to flash any lollipop rom since I've been doing the Odin method for the kernels - you still have to safestrap your ROM though.
In another thread it said to flash the OC3 partition which I didn't find necessary and when I did try to flash them Odin kept failing therefore it wasn't required
You must also flash the module with safestrap right after you do your rom unless you have your modules in a tar file then just do it via Odin.
So to go over it one more time... you have to be able to use safestrap so if you were on lollipop you must:
downgrade your kernel (via odin or nc1 flasher)
then you can use safestrap to flash your ROM and flash your oc3 modules
then reboot into download mode and use Odin to flash your oc3 kernel (sometimes it will fail, just try again, i hold my phone gently to comfort it through the process)
and it boots up going through the safestrap screen at least 4 to 5 times.
Confirmed to work. ..
Goldeneye
Imperium
Car hd
I'll be testing all the compatible lollipop roms for my device it's exciting I can finally flash roms thank you for this tutorial for heading me in the right direction.
:thumbup::thumbup:
Click to expand...
Click to collapse
robot_head, glad to hear you got the custom ROMs working on your device! I will add a note in the OP regarding your experience so it helps others that might have the same issue.
Sorry, but stupid question - you did only try to install flashable ".zip" files from within safestrap, and ".tar" files using Odin? Your word choice in your above post seems to indicate that you do recognize the difference. But I ask that because I did not realize the difference at one point, until I tried to load a .zip into Odin and encountered issues. (and also I wanted to make this distinction for any others reading this thread)
Question for you – when you are swapping between custom ROMs, are you backing up your system settings and apps/data, then restoring them to each ROM (or are you just “sampling” each ROM for limited time and not worrying about your apps)? Based on advice I read in several places, I didn’t use Titanium Backup when I upgraded from 4.x.x to 5.0.1, but I figured I could use it to swap between ROMs now that I’m on Lollipop. But I just wanted to be sure I could easily move between ROMs without requiring so much time manually downloading apps like I did for the upgrade.
@sac02 yes I do have backups of all of my firmware and roms and yes I am just sampling through all of the roms and any apps that I need backed up are on my SD card and Google Play backs up the ones from them automatically. Yes when I'm flashing with safestrap obviously it has to be a zip file and Odin has to be a tar. And if you search the site there are downloads for your kernel in a tar format I actually got half of the help I needed from this thread and the other half from the Goldeneye thread when someone was having an issue with safestrap they had to Odin everything.
Sent from my GT-I9505 using XDA Free mobile app
The instructions are good. You may have a bad download of kernel file. Note that the instructions call for the "reflashable kernel zip file" which can also be found on the NC1 flasher thread.
My main problem is i couldnt flash kernels with safestrap after the rom. Tried a different download, same thing. Either said unauthorized att software
Or firmware update failed, use kies
Or bootloop into system recovery.
Finally. ..just odining kernels solved my issue.
Sent from my GT-I9505 using XDA Free mobile app
I have root on a base NJ4 4.4.4 ROM. I couldn't get the google play edition working on my i337 (dimming sensor worked poorly during calls) so I went to something basic. I'll try your recommendation, thanks again.