Sgs issue - General Questions and Answers

HEPL! i HAVE A VERY BIG PROBLEM ( FOR ME) . My SGS Plus is stucked in recovery mode . When I try to turn it on , the Samsung logo appears and the I se the CWM again and again (I`ve rooted it). I`VE TRYED TO REBOOT IT but wasn`t succesfull and I also took the baterry off. I`m desperate Could anyone help me quickly

Related

Pls Help : Is my HTC Magic Bicked/Brocken? :(

Hello,
I rooted my phone :HTC magic(Vodafone) from 1.6 to 1.5 (successfully, I used it for 2 days)
I wanted to resore it to 1.6
When I tried to update it using HTC-Radio update "ota-radio-2_22_19_26I.zip" from HTC Website.
I could installed it,however when I restarted the phone it is stuck on Vodafone Splash screen.... Itried following things :
1) I created the goldcard again and tried to reboot it in to fastboot mode ,but phone is not entering in to boot screen and again Vodafone Splash screen appers.
2)I tried with Power+Trackball combination as well,but it only thing happening is :Blue LED glows and screen is completely blank.
3)I tried to detect the phone from my pc using adb devices , fastboot devices commands, but phone is not detected
Can anybody help me out of this?
Is my HTC Magic Bicked/Brocken?
if yes then , can somebody tell me where can I repair it in USA ( I am in Dulles/Sterling VA , USA)
PPPLLLLLLLSSSSSS Help me.....
Welcome to forums
Try reading Wiki here
Also enter to Sapphire section, perhaps you can solve your probs there before thinking on send to repair.
Good luck,
Hi Orb,
Thanks for the reply...appriciate it...
I seen the wiki , but I can not see the possibility to boot the phone in fastboot or recovery mode

[Q] Please help ! Bricked my Xperia J , turned off after sony and battery logo .

Just now i rooted my device and still running fine . Then i flash cwm that was intended for other firmware , just trying my luck . Then i try to boot from it , the recovery showing double sided screen and its blinking . Then i realized its not compatible . When i try to boot back my device , it turned off by itself after the sony and battery logo . First sony logo , then battery logo , Then it turned off :crying: :crying: .
Still a newbie . Urgent helpp pleasee . Please dont say its too late :crying: :crying:
umarnisme said:
Just now i rooted my device and still running fine . Then i flash cwm that was intended for other firmware , just trying my luck . Then i try to boot from it , the recovery showing double sided screen and its blinking . Then i realized its not compatible . When i try to boot back my device , it turned off by itself after the sony and battery logo . First sony logo , then battery logo , Then it turned off :crying: :crying: .
Still a newbie . Urgent helpp pleasee . Please dont say its too late :crying: :crying:
Click to expand...
Click to collapse
Uhm, try flashing the stock ftf file using flashtool.:cyclops:
umarnisme said:
Just now i rooted my device and still running fine . Then i flash cwm that was intended for other firmware , just trying my luck . Then i try to boot from it , the recovery showing double sided screen and its blinking . Then i realized its not compatible . When i try to boot back my device , it turned off by itself after the sony and battery logo . First sony logo , then battery logo , Then it turned off :crying: :crying: .
Still a newbie . Urgent helpp pleasee . Please dont say its too late :crying: :crying:
Click to expand...
Click to collapse
As far as i know, your partitions will be all messed up.
I guess all recoveries have recovery.fstab. All mountpoints should exist in this file and it is crucial this information be correct or else very bad things can happen, such as a recovery flash writing to the wrong location.
I don't think you will have any success with it, but still try flashing the ftf file

[Q] Mediacom Smartpad 1010i

I bricked my smartpad trying to install a clockwork recovery.
When I turn it on it , the only thing it does is to use the lights under the screen (I don't know how are they called ) , the screen is black , no logo , no recovery , no factory mode , it doesn't do anything , even the reset button doesn't work. When I connect it to the pc it doesn't recognize anything.
Any idea on how to bring it back life ? Tell me any method even the hardest to understand , I usually follow every guide.
But please find me a way! :crying:

How do I fix my soft bricked Gionee F100 in bootloop

hello everyone !
I got a Gionee f100 few days back .. I noticed each time it was turned on it displays a 4glte animation, which want cool to me .. so last night I went on with the idea of changing the boot animation.zip , which didn't work until this morning .. I was so happy to have a Gionee animation on my phone's startup screen .. to my surprise it got stuck and latet rebooted it self ..
and got stuck again .. I've tried everything which I read online .. N.B .. my phone doesn't enter the factory mode no more .. please guys how do I fix this ?? ..
Flash custom or stock rom.
Thank you my friend !..
I gave it to a mobile engineer .. he returned it saying my phone is a clone .. but I don't believe him because .. it is running what a normal Gionee re F100 should ..
And I rooted it my self .. KingRoot displayed the information : GiONEE F100 with other details ..
Does it mean my phone is truly a clone .. cos I don't think KingRoot would lie .. can it ??
Please help !!
You have to put your phone at download mode or fastboot mode then you have to connect it to your computer then use adb software to factory reset your phone and try to install TWRP or i prefer {redwolf TWRP} using adb software or use mi tool to install it and then flash Supersu or i prefer magisk module.
Your phone will be fine after factory reset
Kahoan said:
Flash custom or stock rom.
Click to expand...
Click to collapse
Thanks Kahoan .. I downloaded the flash file of my phone and with the help of Spflashtool I was able to bring my phone back to life !! Thanks everyone I really appreciate !!
Pdrood said:
hello everyone !
I got a Gionee f100 few days back .. I noticed each time it was turned on it displays a 4glte animation, which want cool to me .. so last night I went on with the idea of changing the boot animation.zip , which didn't work until this morning .. I was so happy to have a Gionee animation on my phone's startup screen .. to my surprise it got stuck and latet rebooted it self ..
and got stuck again .. I've tried everything which I read online .. N.B .. my phone doesn't enter the factory mode no more .. please guys how do I fix this ?? ..
Click to expand...
Click to collapse
Hello,
Please i have a similar problem with my phone,. whenever i install new app and restarts the phone it gets stucked into boot loop at the animation. I searched for stock rom online to reset it, apparently i used the wrong one and now my phone is not coming on,not responding at all.
I need your help,
Thanks

how to unbrick my samsung j7 max

few days ago my phone just stop working . Like it was not charging , no recovery mode and nothing else . So according to internet its hard bricked .
then after couple hundred tries i got it up to odin mode and felt happy thinking now I can flash new rom . but it just stuck at initialing . and suddenly there's message saying use smart switch cause there was error updating the device . Then I used smart switch and even there it cannot recognize the device . So i thought let use sp flasing tool cause why not . I could not find scatter file . also i dont think that will work . I also flashed just the stock recovery and it worked but when i use it to flash or factory reset it just reboot to logo and next the recovery is gone again. NOw i have no idea what to do . can anyone please help me

Categories

Resources