Okay. I have read quite a bit on this forum regarding the ROMs and CWM. I have rooted my phone and am looking to add Gummy Charge. I have never done this with a phone and the rooting process was nerve racking knowing what could be the consequences. I use this phone for work, but would like to enjoy it while I have it.
As I said, I have read quite a bit, but am still confused. I have a few questions:
1) Define flash.
2) I have dowloaded the following files:
- GummyCharged_FE_1.9.1_FullOdin.tar.md5.7z
- 0817_charge_recovery.tar.md5
- Voodoo-stable-5.5-Froyo-GT-I9000-odin-pda.tar
Are these the files I need for this process?
3) What order to add these to the phone through Odin?
4) Once these are added, do I start up after each install?
I think this will cover it for now.
I appreciate everyone's time and hope this is not a repeat series of questions. I really appreciate all developers and the time they have spent putting all this together for our benefit.
Scott
K so forget the i9000 file all together. Actually just delete it before you really screw something up.
Flashing is the act of overwriting system partitions with alternate firmware. Thats my best shot at a clear def.
On to the rest. Be sure youve got odin set up properly drivers and all.
Now all youve got to do is flash the gc1.9 odin package. Let boot. Go back to download mode then flash recovery in odin and let the phone boot.
Ps you may not need to flash the recovery in odin but i can't remember if that gc package includes one do you might as well just do it....
Also I believe that package includes a voodoo kernel so it could take quite a while to boot up the first time..
Happy flashing my friend!
Sent from my Gummy Charged GBE 2.0 using XDA App
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Now all youve got to do is flash the gc1.9 odin package. Let boot.
Click to expand...
Click to collapse
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
TacticalMonk said:
Thank you for your quick response.
I'm assuming I have all the drivers for Odin since I used it for the rooting process.
If there is something I may be overlooking please let me know.
You mention:
Is this what I use Odin for or is Odin only used to "place" the file in the phone? Are there steps that I need to do to "flash" the phone or do I just boot up and I'm now running Gummy Charge.
Click to expand...
Click to collapse
all you need to do is get the phone into download mode and connect it with Odin open on your pc, press PDA (NOT PHONE) and browse for the Gummy odin package ending in .tar.md5, place the battery back in and press start then let Odin flash the rom to your phone... when its finished unplug your phone and remove battery, then put it back in and boot the phone up (first bootup may take a while so bear with it) then enjoy your rooted and custom rom'd phone... using ClockWorkMod that installs with the rom you can then flash anything you want in the future like newer kernels or different roms
blazing through on my 4G Droid Charge
I am preparing to root my Verizon GS3. The process looks pretty simple, but I still have a few questions I would like to have cleared up first just to make sure everything goes to plan.
I have downloaded the following files as instructed to in one of the threads on how to ROOT the GS3:
- USB Drivers
- Odin (unzipped with Winzip)
- Stock rooted system image (mirror link)
- CWM
My first question is whether or not I am supposed to unzip the stock rooted system image. The post says I should have a file named "rooted.system.img.tar" to select in the PDA section of ODIN, but the name of the file I have is just "rooted.system.img."
The second question I have is which custom recovery should I choose? I downloaded both, but don't know if one is better than the other or if it just comes down to personal preference. Also, do I need to unzip either one of those files? And if I choose not to push a recovery now, can I push it later if needed to flash a new ROM that I like. I ask this because the only real reason I want to root right now is to disable the ridiculous wifi notification in the notification bar and the pop up that you get when opening a "high data usage application."
Another concern I have is returning to stock. On my DROID X2, all I had to do was use RSD Lite and flash back to stock. I have downloaded the stock kernel and stock ROM off of one of the threads on here (I can't find it for some reason), but was just wondering how I would go about using that to get back to the way it was out of the box.
Thanks for the help!
Edit: As far as the first question goes, I selected the rooted.system.img in ODIN and it shows it as rooted.system.image.tar at the end, so I'm guessing no unzipping for that file is necessary, correct?
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
manchild83 said:
Don't unzip that tar you are good with that system image. Install the usb drivers and put your phone into download mode. Start Odin then set that to pda plug in your phone and wait for the drivers to install correctly. Remember you should have a full battery before flashing. Browse to your image then flash the system image, it might take a while to flash so be patient and don't move the computer or phone.
Just pick the recovery you like they are really up to personal preference. I like cwm because I used it in my og droid and dinc. You can always change recoveries in the future if you find a different one you like more.
You don't need to install cwm in the old way, just download it from the play store after you are rooted. When you install the recovery from the app choose Verizon galaxy s3 from the list. It will ask for root before trying to install cwm recovery. When you install cwn it will make your phone say custom when you boot up so if you don't want that skip the recovery for now.
I have never returned a phone to stock but I think to return to stock flash the stock Verizon image with Odin.
Down with Verizon for locking my bootloader
Click to expand...
Click to collapse
Sorry for the late reply. I went out to eat with the fam.
Thanks for clearing that stuff up for me! Can't wait to root my GS3 in 7 days after my return policy is used up!
Thanks again!
You're welcome good luck with the phone.
Down with Verizon for locking my bootloader
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
DROIDLOVERX2 said:
So I am officially getting ready to ROOT my GS3. Is there anything I need to do to prepare for the process? I have seen people say you need to enable any of the bloat you have disabled and I have also seen wiping the cache thrown around a few times, so I would just like to know if there is anything along those lines that I need to do before I start.
Click to expand...
Click to collapse
I'd follow this to root. Don't need to do anything else but what it says there.
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!
3. Using your USB 2.0 cable and ports Install the Custom Rom "P900XXUANB3-RecoveryImg.tar" FIRST and flash it via ODIN 3.07 under the PDA checkbox that is "fixed" (so you noobs don’t make any soft bricks if this is your first attempt at rooting), and only use the ODIN 3.07 THAT COMES W/ CHAINFIRES AUTO ROOT .zip file and then unzip the folder to open ODIN 3.07 ONLY! This is only because I have read that there have been issues installing the SU via Chain Fires Auto Root Process... the file is called (currently as of 25 JUNE 2014) "P900XXUANB3-RecoveryImg.tar" PDA select it and then start when in DOWNLOAD MODE on your device. Manually select DOWNLOAD MODE if you have to BEFORE PRESSING START! Otherwise, one is just going to sit there and not accomplish anything.
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
http://forum.xda-developers.com/attachment.php?attachmentid=2591159&d=1392930654
http://forum.xda-developers.com/attachment.php?attachmentid=2775098&d=1401644348
4 Reboot back into DOWNLOAD MODE. Flash in ODIN 3.07 with the PDA section and select this file next to install: "openrecovery-twrp-2.7.1.0-v1awifi.img.tar"
5. In DOWNLOAD MODE and flash the file under the PDA box TWRP (OR CURRENT RECOVERY OF YOUR CHOICE THAT IS AVAILABLE)
6. AGAIN... Restart your device into DOWNLOAD MODE via ODIN 3.07 and select PDA and then finally root this: "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5" Then you can backup, restore, flash anything, and be happy! YOU SHOULD FINALLY HAVE A SUCCESSFUL ROOT! Turn off and REBOOT into RECOVERY to see if TWRP stuck and then reboot to see if the SU stuck. IF everything stuck reboot back into TWRP to flash whatever rom is available MAKE SURE TO BACK UP EVERY FILE BEFORE YOU FLASH ANY NON-STOCK ROMS. If not successful rinse wash and repeat until it does!
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
7. That’s it you should have root and a custom rom and recovery if you followed these instructions for flashing via ODIN 3.07 and Chainfires AutoRoot files. If you still have an issue repeat until root/recovery/Rom sticks. If you have to update the Binary for the SU just go to the Google Play Store and install the app and then try it again till it works. GOOD LUCK it worked for me this way!
**IMPORTANT**
BACK UP BACK UP BACK UP BACK UP after every flash that is possible to back up. If you can, back up the NON-SU stock ROM BEFORE installing SU, after installing the recovery and/or back up.
***IF I HELPED YOU OUT THANK ME***
DISCLAIMER - all research was observed via comments on the thread according to issues people have been having during ROOTING the device I simply have compiled the data and made a check list!
Need a link to the files you mentioned.
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
sstea said:
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
Click to expand...
Click to collapse
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Spere said:
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Click to expand...
Click to collapse
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
sstea said:
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
Click to expand...
Click to collapse
You can always flash stock firmware via odin
I was just wondering if everyone was having a much easier time with achieving root now? Kies caused me to "Hang" a lot during the Root and custom rom to stick w root... as of right now i can not get the only ONE custom ROM that looks promising, i have found by GWatts (correct me if i am wrong and i apologize if i have typed the wrong screen name handle) i believe his handle is... at this point im not sure what i am doing wrong as of yet but im sure i am missing a step or i just need to start back at unroot back to stock firmware and try and try again lol. not saying anything is wrong with his work at all by any means because people other than me with the same device have gotten it to stick and im just wishing i could as well because its sweet looking ROM! NOT TO MENTION THE ONLY ONE THAT IS OUT (that is which i know about. i haven't been on in a few months idk), SO KUDOS TO WATTS i just haven't been successful at installing his custom rom just yet... Im hoping that its just going to need to be erased again and then reformatted after a factory reset and what not, i pray it sticks because his incorporation of the aroma installer was a nice touch and his ROM really looks good... Now if i can just get it not to stick at samsung boot logo and freeze id be good lol!
sanvara said:
Need a link to the files you mentioned.
Click to expand...
Click to collapse
ok
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
pnuker said:
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
Click to expand...
Click to collapse
**Edit**
I went back and reflashed the twrp file and it got me out of the error screen. I installed supersu, and then re-flashed the cf-auto-root file, and it worked like a charm. I'm not sure if it was the installation of supersu, or just repeating the process that fixed it, but I'm happy either way...
Thank you! I succesfully rooted my SM-P900 after all mentioned problems ( hanging in the cache.img and after a while a disturbed screen etc.) with your guide. I am a very happy rooter now.
Thanks,
Thanks to the poster. I tried rooting with the instructions from a few other sites and thought I bricked it,
Followed your instructions, and presto.. Rooted! :good:
Rooted!
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
your welcome!
frankiecxyz said:
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
Click to expand...
Click to collapse
your very welcome! it took me a bit to get it down but i eventually figured it out and at the time information on rooting the device was hard to find with this specific model. then i discovered what the issues where and felt the need to post it! im glad i could help!:laugh:
Flash SU with TWRP not ODIN
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
soft bricked
Hello!
First of all let me say that I'm a complete newbie, this is my first android device. I tried to root my SM-P900 (P900XXUANI1) using an online guide (image with URL attached, as I am not allowed to paste URLs)
Unfortunately at Step 10 (flashing with Odin) the operation failed and now I ended up with a soft bricked device (I assume this is the correct definition). It will only show the message asking me to connect it to KIES to recover it.
I know i can try to use KIES 3 and restore it, but before that i would like to ask if there is any alternative which will allow me to unbrick the device without losing all my data... (yeah i know...).
If i follow this guide will this help? I'm not sure if I can even put the device in download mode again as it shows the error message about connecting it to KIES...
At this point I don't care about rooting, I just want to unbrick the device.... I understand the guide up to (and including) step 3. But for the rest of the steps I'm lost Could anyone please explain them in a bit more detail? I don't want to install any custom firmware, just to unbrick it...
Any help would be very appreciated!
Thank you
Yemble said:
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
Click to expand...
Click to collapse
Have you got a link to the odin rwrp 2.7 you used and the su 2.7 flash for twrp please?
VenomousViper said:
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!.......
Click to expand...
Click to collapse
When i trying root, my SGN freeze in "cache". Odin show error and tablet goes to Emergency Firmware Recovery. Аnd it does not matter what program I use and how I do it.
Mine Reboots Constantly
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
sunnykhs said:
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
Click to expand...
Click to collapse
Have you cleared dalvic cache and cache in TWRP recovery? Be forewarned the process takes a while for cache wipe.
Sent from my SM-P900 using Tapatalk
this is the second time i've soft bricked my phone in the past 6 days and if this is fixable i will probably consider researching for weeks at a time before trying anything new..
anyway, the first time i soft bricked my phone last week, my s6 was rooted (via chainfire, G920IDVU1AOC6) but i decided to unroot so i could update software. after unrooting with SuperSU, i attempted to update by using smart switch and then something went wrong with that process (my firmware was at G920IDVU1AOC4) which i then fixed by flashing G920IDVU1BOE3 (latest stock firmware) WITHOUT the hidden.img
backstory out of the way, i wanted to flash TWRP so i could install xposed installer. i used the same chainfire firmware that worked the week prior (above) and so now my phone is soft bricked
things i've tried:
- flashing recovery of AOC4 - i can get back into recovery mode with the older firmware
- flashing AOC4 stock firmware with AND without the hidden.img
- flashing the BOE3 stock firmware with AND without the hidden.img
i'm still able to get into download mode and stock recovery and i've already tried wiping cache and factory reset but nothing works.
i continue to get FAILED on odin
if anyone is able to bring my phone back from purgatory for the second time it would be greatly appreciated.
thanks in advanced, mojo.
Ok, I soft bricked my s6 too :/ its fine now so dont worry, actually, I read somewhere the problem of failing is in Odin, and you need to flash the stock recovery and then recocery.img you extracted from it in a way odin can read, im from my phone now so I will try to search it out, hope I will find. Dont worry dude your s6 is alive.
Ok i found it, http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736 , I burned stock and then the file he supplied,worked like a charm.
JusTeN_ said:
Ok, I soft bricked my s6 too :/ its fine now so dont worry, actually, I read somewhere the problem of failing is in Odin, and you need to flash the stock recovery and then recocery.img you extracted from it in a way odin can read, im from my phone now so I will try to search it out, hope I will find. Dont worry dude your s6 is alive.
Ok i found it, http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736 , I burned stock and then the file he supplied,worked like a charm.
Click to expand...
Click to collapse
thank you so much for your reply and reassurance! i'll try this out right now and update on the results
UPDATE: i tried flashing stock and then the my-recovery.img.tar and i could get into recovery but i was stuck in boot loop.
is there something i'm doing that's incorrect?
Saafir said:
Did you remove the cable, boot download mode, then reconnect and let the driver install screen complete on your PC? Sorry if its a bit redundant but I had made this mistake before.
Click to expand...
Click to collapse
yes i have reconnected each time but thanks anyway!
JusTeN_ said:
Ok, I soft bricked my s6 too :/ its fine now so dont worry, actually, I read somewhere the problem of failing is in Odin, and you need to flash the stock recovery and then recocery.img you extracted from it in a way odin can read, im from my phone now so I will try to search it out, hope I will find. Dont worry dude your s6 is alive.
Ok i found it, http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736 , I burned stock and then the file he supplied,worked like a charm.
Click to expand...
Click to collapse
I FIXED IT.
i'm not exactly sure of the steps i took, as i had to keep waiting for my Unified Android Toolkit to create the tars but essentially what i did was i flashed;
- stock BOE3 WITHOUT hidden.img
- TWRP recovery (was able to boot into twrp and when i looked through some settings (reboot) it said i had no OS installed for some reason
- from this info i tried flashing the AOC4 older firmware WITHOUT hidden.img then it worked.
do you think it is worth attempting the smart switch thing mentioned in that link you posted?
i wouldn't want to run into this problem again..
my lord.. so SOMEHOW i managed to get myself into this for THE THIRD TIME..
once i got it fixed, just a few hours ago, everything was fine and i was then able to flash CF root again.
but once i tried to install TWRP (it worked before i fixed the second time) odin FAILED again and i'm back to square one.
i'm unsure how to properly fix it and the steps i took before aren't working now and i can't even flash any recoveries (whether its AOC4, BOE3 or TWRP)
can anyone suggest anything else please?? i'm in panic mode again lol
this is definitely the last time i try to do any type of configuration with this device.
Do you have recovery now? Maybe burn some custom rom? ..
JusTeN_ said:
Do you have recovery now? Maybe burn some custom rom? ..
Click to expand...
Click to collapse
now i can't flash the twrp .. it won't work. this suck so much!
UPDATE (final update, hopefully ): fixed it AGAIN.
after going through this hellish nightmare for the 3rd time and reading countless threads, i've discovered that the FAILs on odin may be occurring due to the corruption of the firmware file.
so if anyone goes through my problem, CREATE A COPY of the desired firmware before flashing with odin!
thanks justen for your patience and attempts to help me!
So I just revived a replacement phone the other day, it came preloaded with 6.0.1. I wanted to root and flash a rom so I ended up finding a guild online and started to follow it. It had me flash a file via odin and after it would just stick on the tmobile logo with the blue led on. So I looked around and found another recovery file and tried that, now it gets stuck on the first screen with a warning that its not sandroid enforcing or something.
I am having a heck of a hard time finding the files to restore everything back to 6.0.1 so I can have another go but can't seem to find the files I need. I think I need 2 files, one for the boot part and one for the rom?
Please help or i'll be forced to use an iPhone!
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Guess this forum is le dead.
Drachnem said:
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Click to expand...
Click to collapse
lol you said "guild" and "Plox" you must play an MMO. ;p
Drachnem said:
Need help plox.
I keep trying firmwares but they fail, what Odin and firmware should I be using?
5$ to whom ever can get me back to stock, $10 to whom ever can then get me rooted and twrp via paypal as a thank you for your time and patience.
Click to expand...
Click to collapse
Flash stock firmware from sammobile.com. download most current, extract, place phone in download mode, have a GOOD USB cable, add file to AP section of Odin, and flash. Once you get fixed then I'll help you root or whatever you're trying to do. If you have any issues returning to stock, please copy Odin logs so I can see where Odin failed.