Related
This is the Froyo FRG22 image for our Milestone. but as this is not using the kernel, there are some limit to functions based on kernel requirement. But its close, and works great and is alot faster.
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod´or you can visit my new homepage at Dexter's mods
Primary Image download - MotoFrenzy v0.52 FULL image
OLDER FULL RELEASES -
MotoFrenzy v0.51 FULL image
MotoFrenzy v0.5a FULL image
MotoFrenzy v0.4 FULL image
MotoFrenzy folder goes into /nandroid/adbrecovery on your SDCARD
ALWAYS WIPE YOUR PHONE BEFORE INSTALLING A FULL IMAGEPatches
none
download the latest attached zip , and inside you find a MotoFrenzy-vx.xx-update-nosign zip , which you copy to your sdcard into the folder /OpenRecovery/updates and recover from OpenRecovery menu.
Patches only match the release which it is made for. so 0.1 release has patches 0.1(a-z) and so on. you cannot use 0.1a on a 0.2 release.
THEMES (works on 0.5 but FRG22 features are lost)
Themes applied with OpenRecovery, will automatically format(factory reset) your phone, as these has different signatures and cannot be used on top of this releas without factory reset.
Download http://dext3r.komodin.org/MotoFrenzy/MotoFrenzy-v05-FRF91-stock-theme-nosign.zipTheme - Nexus1 theme for froyo.
This theme is based on Modaco R21 release with chinese included too.
it has multilanguage support and france,germany,italian,portugese and some chinese(i cannot pronounce) as examples
hw keyboard light only works when "auto" light is disabled. (use power panel, so you can manage light if needed)Download http://rapidshare.com/files/410811694/MotoFrenzy-v04-theme-UDexteme5.0.1--nosign.zip.htmlTheme - UD Extreme 5.0.1 for froyo.
This theme is primarily "dark grey".
All credits goes to Ultimate Droid for the making of this mod, i just ported their Droid release to run on our milestone.
You should note, this uses an alternate launcher(PRO) and added functions(UDParts menu) into menus for configuation and as example DISABLE/CHANGE PREFERRED STORAGE for Market downloads, which we, with a 2.1 kernel can utilize. Please visit their site to see the pictures of this mod.
I have not have the chance to test all options of their menu functions but it looks promissing.Download http://rapidshare.com/files/410815633/MotoFrenzy-v04-theme-stock-theme--nosign.zip.htmlTheme - Droid FRG01 stock theme for froyo.
Original theme coming with 0.4 image. this is primarily just for easy restore.STATUS
WORKINGCamera
Bluetooth
GPS
Radio (GSM,GPRS,HSPA)
Wifi
SDCard detection
USB / ABD
AC Charging (milestone specific option)
3D games / full display support
Video playback (Youtube etc..)
Wipe
G-sensorNOT WORKINGVideo Recorder + camera focus/audio
INSTALLATION
FULL Images are copied to the SDCARD into /nandroid/adbrecovery folder, and installed from your OpenRecovery menu.
Patches are copied into the /OpenRecovery/updates folder, and installed from openrecovery menu.
Radio Band Requirements for different countries
Some countries require the original 3G files of your current ROM to work ie. Canada, Brazil, Venezuela, Germany and some others countries uses a different band for 3G. If u dont backup the 4 original 3G Files and restore it over this nandroid once installed u gonna have poor signal, sms problems and HSDPA loss (even if u set apn and get conection its gonna be crappy one).
Files should be in the /system/etc/motorola/bp_nvm_default/ of your phone.
Files can only be copied from OpenRecovery , using adb shell.
Latest v0.5 has builtin install option using GScript , so you can get the radio replaced/installed. without update zip files.
You might check this thread , if a update-nosign.zip file exists for your model. which makes it easier for you to install.
Filenames are:
File_Audio
File_Audio2
File_GSM
File_Seem_Flex_Tables
generic_pds_init
Changelog history
v0.52: 13-09-2010- native froyo apps2sd now working, thanks to Nadlabak on his work on this. you can call it a preview of his cm6 release looking forward to it.
- location fix, mistakenly updated complete gapps update, but not compatible with our milestone.
- vpn correction.. (thanks to Pooyan for supplying the account to verify it with)
- adobe flash removed (download and add externally, the enabler i made is not working)
- youtube,twitter,maps,voice updates possible in this version (problem related to gapps update)v0.51: 11-09-2010
- updated google apps so updates are possible.
- added missing flash apk. (use gscript to activate)v0.5d: 10-09-2010
- Deodex'd framework.. added custom circle battery stats + E/3G baseband icon.
- DLNA + Files apps (original from MotoBlur) included.
- "Files" it makes it possible to copy from/to/between windows fileshare.
- DLNA service is for now still testing- replaced battery stats lib..
- corrected /etc/gps.conf , added google info + Europe NTP services.
- fixed libril driver (earlier version had problems)
- added notification information onscreen, when shortcuts are used.
- re-enabled panic daemon reboot, if/when a process fails (such as radio process)
v0.5c: 28-08-2010- Added Ext2 filesystem check before mounting.
- init.rc changes
- New Keyboard shortcut functions (hold all 3 keys to activate)
- Spotlight switch (LEFT SHIFT + A + DPAD CENTER)
- hw keyboard light switch (LEFT SHIFT + A + L)
- Disable apps2sd (LEFT SHIFT + A + U)
- Enable apps2sd (LEFT SHIFT + A + T)
- start adb (LEFT SHIFT + A + X)
- restart RIL(phone driver) *TEST* (LEFT SHIFT + A + SPACE)
- copy all downloaded apps to sdcard (LEFT SHIFT + A + P)- Latest Overclock module + app (v1.4) and is now activated (550Mhz) even if no "overclock" file is found on /sdcard
v0.5b: 23-08-2010"Call waiting" has been fixed.v0.5a(a): 22-08-2010blue led startup fix + usb fix + GScript app + apps2sd ownership mount fix.v0.5: 21-08-2010Release updated to FRG22 (official Droid OTA release)
Apps2SD ext2 partition supported (no more need for use_apps2sd trigger)
Fixed data signal icon to show E/G/H types
Added GScript script options for ease of use.
- Included overclock file creation (Default 550Mhz)
- Baseband installation option (several countries included)
- Switch GoogleEmail app (Exchange policy on/off)
- See space free on EXT2 sdcard partition (partition2 only supported)
- switch build.prop (Nexus1 and Droid)
Corrected hw keyboard link, so G.O.T hw keyboard recovery should work now.
Dalvik cache now moved to /cache folder
Adobe flash 10.1.72 included seperately
v0.4: 03-08-2010Camera starting to work a little, but has FOCUS problemCompletely new rebuild with Droid stock FRG01BFlash 10.1 included as apk (push it to the phone with "adb"
its no longer possible to download with this release.
build.prop does not match.see bottom of this post for AudioEffect application, and download zip here.
Removed old changelog below v0.4, seems useless now...
the greetings
Nadlabak - compiling and testing native froyo apps2sd functionality.
Pooyan - getting vpn working
Fightspit - circle battery icon stats.
Anonymous - betas of images.
Thyrus - early versions testing with alternate framework
Luis - themes
OMG
this is for real !???
wooooww coool, now we dont have to wait the slowpoke motorola to release the froyo
keep working man
thank Dexter_nlb.
Nice!
Could someone host the file somewhere else, please?
Not working here, a warning appears and screen turns black.
Same here... warning screen flashed then nothing.
what a great job ! thanks
good news! thanks.
Flashplayer works?
Sent from my Milestone using Tapatalk
Wow that is great news, thank you very much.
Just one - F**k yeah, damm Motorola no need to release Froyo, we have Dexter_nlb
waiting for new release
Thanks!
so it worked?? I have ever opened a thread about not touching the kernel, but only upgrade the OS
amazed this is possible, i will try this
Amazing Work!
Hopefully we can build on this ;-)
wow!
how did you manage it with the bootloader?
you are my hero!!!!!!
barach said:
Flashplayer works?
Sent from my Milestone using Tapatalk
Click to expand...
Click to collapse
Yes, Adobe Flash 10.1 Beta 3 works fine
FIXFILES for offline image - MotoFrenzy v0.1 missing dump files (5MB)
Sorry, but i was hoping that i could do without, but you prove me wrong here...
These fixfiles are for those that get the first image..the other image will be uploaded again with a all files included.
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
yantz said:
rapidshare is driving me nuts!! perhaps you could upload it somewhere else? thx!
yantz
Click to expand...
Click to collapse
Mirror 2 - MotoFrenzy v0.1 missing dump files (5MB)
megavolt007 said:
Same here... warning screen flashed then nothing.
Click to expand...
Click to collapse
I come to think that you used WIPE after installing image?
There is a check builtin which checks if app files are missing,
was that the "warning" you saw?
thx a lot dexter! actually i was referring to the new image you were abt to upload thx once again
yantz
!!This is ONLY for Toshiba Folio 100!!!
This Mod is based on Tnt Stock image for Viewsonic G tablet and now working on our Folio 100.
V0.4 EDITION BREAKS QUADRANT SCORE OF 3000+ with fs optimization patch
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me a Red bull, and you're sure i stay up working on this mod or you can visit my new homepage at Dexter's mods
Folio100 Wiki pages available here and here
Other non-FolioMod , but folio100 threads Kernel&Tweaks & General questions thread
Please use these for non-FolioMod questions, like screen,battery etc...
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE
Download FolioTntMod v0.4
Extract contents to a folder and follow instructions below or Readme inside zip file.
copy the update.zip to a sdcard, and insert sdcard into folio.
Enter "Recovery menu" when folio is just turned on and press (POWER) once and (VOL up) next.
press (VOL up) Factory reset or system update.
press(VOL down) to continue to system update.
press (VOL up) to confirm system update.
during installation progress bar will show har far it is.
folio will reboot after installation.
if you need to wipe, repeat the steps above without sdcard inserted, and you get into recovery menu. Press "HOME" button to see menu and choose "factory reset".
Rollback to original stock rom:Download Folio stock image for full restore to stock rom
extract zip to a folder, and from here follow steps 1 - 9 above, to install the update.zip .
This image is for rollback purpose, if you do not want the mod edition, here is the way back to stock rom.
Remember to run a factory reset before or after this stock rom install..
Old releases
Mirror 1 - FolioMod v0.3a Nvidia based
Mirror 1 - FolioMod v0.2a Nvidia based
Patches
IMPORTANT PATCH 02-01-2011 - Fixes serious fs optimization problem download here
This patch will automatically enable the fs optimization in v0.4 as well.
Rename zip file to update.zip and install using recovery menu.
Known issues (also reported by users)
- Wifi seems to work in inverse on v0.4, you need to force "always enabled" in avanced settings, to have it turn off when not used
- all - Cannot use "clear data" in "manage application".
- Vending(Market app) has wrong icons (stars looks wrong)
CHANGELOG
v0.4a
Fixes serious problem with fs optimization , if a crash occur.
Fixes wrong sensor library used.
v0.4
Wifi adhoc/regular mode possible with FolioWidget (installed seperately)
Games orientation fix by weeds2000 (tested with Asphalt5,3d tilt as example)
Nvidia performance pack v2 (originally built by rothnic/xda-forum)
(Quadrant 3D performance increase is +400 compared to previous runs)
filesystem optimization addon solution
* put "update-enablefsoptimize.zip" on sdcard, rename to "update.zip"
and run through recovery as normally with update.zip to enable optimization.
DO NOT EXTRACT "update-enablefsoptimize.zip"!! JUST RENAME IT.
(Quadrant I/O performance is adding another 700+ points to score)
Custom kernel included for CIFS support
v0.3a
Audio missing with tnt drivers, so its using folio drivers now.
v0.3
Based of latest TNT release 1.1-3338
Added Gapps support
Added Superuser apk
Removed a few unneeded apks (OTA update for TNT only)
Paid Apps can be downloaded in this version!.
Fixed framework to utilize our external sdcard + usb stick.
Thanks to all those which have donated. Its truly appreciated to see people actually like this and would pay a little to get the improvements in place!!
Thanks!
Thanks to all who reported on beta-testing of this latest release..
WARNING: Use this image at your own risk and i take no responsibility if
you brick your tablet.. Image has been tested on a Toshiba Folio 100 and works fine if guidelines are followed.
FIRST!!!
Thanks Dexter!!!
downloading now...
Thanks
downloading..............................
My Folio should come in few days and I have questin, which room should I choose? This one or 1.2?
Best regards M-XXXX
Hi Dexter,
Do we need Wipe Before Installation ?
shpitz said:
Hi Dexter,
Do we need Wipe Before Installation ?
Click to expand...
Click to collapse
yes..
and sorry..
download has been pulled...
framework does not seems to work with new Vending.apk app..
i tested it fine with old vending apk, and at last moment installed new Vending apk and now it crashes.
Cool, wait until you upload a revised version.
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Thanks
Stéph.
Ive installed the "crashing" version...
now I wait for the new release...
but...
it's possible to have some some more languages (i.e. Italian )
Ive force close with contact app...maybe a new market related issue...
I cant set my own wallpaper...ther is a way to do that please?
btw great rom! maybe better than foliomod! I really like the new interface!
ps. no screen lock. Ihave to set it somewhere?
davidebeatrice said:
it's possible to have some some more languages (i.e. Italian )
Click to expand...
Click to collapse
did you try "morelocale2" as i suggested in readme?
davidebeatrice said:
I cant set my own wallpaper...ther is a way to do that please?
ps. no screen lock. Ihave to set it somewhere?
Click to expand...
Click to collapse
don't know.. normally you can "lock screen" in settings.
HCPASS said:
Hi Dexter,
Do yu think it's possible to use TitaniumBackup Backup(Program and system) from 1.2 to réinstall program and system on these 0.3?
Click to expand...
Click to collapse
apps yes, but generic settings for the specific edition no..
as this has other framework + different launcher, some settings differ.
but try and find out, you probably find some apps crashing, but then try uninstalling and reinstall.. never tried it.
Dexter_nlb said:
did you try "morelocale2" as i suggested in readme?
Click to expand...
Click to collapse
oops...didn't readed
Dexter_nlb said:
don't know.. normally you can "lock screen" in settings.
Click to expand...
Click to collapse
i cant find screen lock option in settings...
wallpaper issue?
thx!
First experience (except for my small marketapp problem)
is , that it download/install faster... and lagging seems less here?
Of course post experience compared to my Toshiba edition, so we know if its worth using or just maybe, the fact that our Toshiba edition is actually is quite good..
Seriously I love it, it's running perfectly great:
-notification bar and setting are just awesome..
-wifi working great for me
-memory usage is good
-battery and standby I'll check tomorrow after night testing
-SDCard works great even with toshiba file manager (used titanium backup to install back my apps)
-new home also great but less responsive
-launcherpro or adw.launcher both works great but "setting" doesn't work since it's using new setting app
-Browser and mail client looks great
Still some bugs:
-No 360° rotation - Sorry 360° works great but doesn't work with home default launcher
-Only english (us & uk), more local 2 don't change a lot
-Taskmanager doesn't work
well this is my feedback after few minutes testing
again Dexter a great work, thanks
PS/ Happy Holidays for all
Dexter_nlb said:
download/install faster... and lagging seems less here?
Click to expand...
Click to collapse
I confirm...
bigbbl said:
mail client looks great
Click to expand...
Click to collapse
I love it!!!
bigbbl said:
-Only english (us & uk), more local 2 don't change a lot
Click to expand...
Click to collapse
you must be doing something wrong, i got like 15 languages selectable, and even more, when i type my national code as explained in readme.txt .
so check again.. many lang's works fine on this one, just using morelocale2
Hi all,
thanks for this new mod Dexter, but I've some questions :
- With morelocale2, I've change the langage to french, but I've always a QWERTY keyboard, any idea ?
- The mail app don't sync my email with hotmail in exchange, do you know why ?
I like this mod, you're doing a very good work, all my respect
Cheers
hi dexter,
Did You upload the updated version without the crash?
shpitz said:
hi dexter,
Did You upload the updated version without the crash?
Click to expand...
Click to collapse
yes it just finished now.. and its verified!!!
!!This is ONLY for Toshiba Folio 100!!!
This Mod is based on Toshiba Stock with additions from Nvidia SDK and Blur to make a better functioning stock rom with google apps and better OpenGL ES support.
You can also follow updates on Twitter now: Dexter Picard (DexterPicard) on Twitter or
me for my excellent and continued development or you can visit my new homepage at Dexter's mods
for new users with latest 2.2.5.0131 firmware, here is a howto on reverting tablet to be able to install custom roms.
Wiki pages available here and here Other non-FolioMod , but folio100 threads Kernel&Tweaks & General questions thread
Please use these for non-FolioMod questions, like screen,battery etc...
Installation Instructions:
ALWAYS HAVE CHARGER CONNECTED WHEN UPDATING A FIRMWARE.
A FACTORY RESET IN RECOVERY MENU IS ALWAYS RECOMMENDED TOO.
download latest FolioBlur full zipfile- Extract contents to a folder and follow instructions below.
copy the update.zip from inside downloaded zipfile to the root of your sdcard, and insert sdcard into folio.
Enter "Recovery menu" when folio is just turned on and press (POWER) once and (VOL up) next.
press (VOL up) Factory reset or system update.
press(VOL down) to continue to system update.
press (VOL up) to confirm system update.
during installation progress bar will show har far it is.
folio will reboot after installation.
if you need to wipe, repeat the steps above without sdcard inserted, and you get into recovery menu. Press "HOME" button to see menu and choose "factory reset".
After reboot a BLACK screen appear for 1 or 2 minutes!! don't worry, its normal!
Rollback to original stock rom:Download Folio stock image for full restore to stock rom
extract zip to a folder, and from here follow steps 1 - 7 above, to install the update.zip .
This image is for rollback purpose, if you do not want the mod edition, here is the way back to stock rom.
Remember to run a factory reset before or after this stock rom install..
Latest Full update
FolioBlur v1.2
Patches
V1.2 power button fix - here
Installs like update.zip in regular recovery menu, so rename this file to update.zip after download and put on sdcard and install from recovery.
Old releases
FolioBlur v1.1
FolioBlur v1.0
Known issues (also reported by users)
- proper usb support. there is no active service handling it.
THANKS to
Weeds2000 , for the great help and fixes done so far for us (Orientation + paid apps, vold with NTFS corrections to FolioMod) + Kernel compiles
DerArtem - Compiling kernel + and being very active on getting 3G modem support for us on our folio!!
CHANGELOG
v1.2
3G enabled now.. works with many Huawei 3g usb dongles.
fixed orientation sensor with some games
Power button fix is added as extra (found fix in last moment) download patch to correct it.
v1.1
Flash 10.2 included and fully working now (tested with games + streaming media)
v1.0
Initial first release
Thanks to all those which have donated. Its truly appreciated to see people actually like this and would pay a little to get the improvements in place!!
Thanks!
WARNING: Use this image at your own risk and i take no responsibility if
you brick your tablet.. Image has been tested on a Toshiba Folio 100 and works fine if guidelines are followed.
NOTES on first release:
Reboot once after first bootup and launch screen has appeared, to enable non market apps install from ie. sdcard.
this is not available in this settings.
nice work, but could u post some screen shots of the homescreen and some other screens. this will make it easier for the people to choose from the different variations of custom roms u make for the folio.
kaivish said:
nice work, but could u post some screen shots of the homescreen and some other screens. this will make it easier for the people to choose from the different variations of custom roms u make for the folio.
Click to expand...
Click to collapse
Was wondering the same
killerbie said:
Was wondering the same
Click to expand...
Click to collapse
I cannot so easily provide it.. the screencapture function does not work on this framework, and no other utilities currently do snapshots.
and my camera pics are really bad.
does this one help
Image is online..
not sure yet on how to provide pictures...
Hi Dexter,
thanks for this great great ROM.
Now only two question:
1) Is possible to have italian language ?
2) I'm not able to go in sleep mode pressing the phisical on/off button on. Is it normal ?
Thanks a lot for your great work and sorry for my bad english.
ambste said:
1) Is possible to have italian language ?
2) I'm not able to go in sleep mode pressing the phisical on/off button on. Is it normal ?
Click to expand...
Click to collapse
1) try MoreLocale2 from Market
2) yes, for now its actually a defect, i think keys layout somehow is wrong. it works fine on elocity.
Thanks for your fast reply.
Is possible put the folio in sleep mode with a soft button ?
try market, for a screen off widget? or so?
otherwise here and now, try to set screen timeout to a lower value?
I have only one question its possible czech language on this rom? thank.
Keyboard from FolioBlur
Hi,
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Regards
keiler1972 said:
Hi,
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Regards
Click to expand...
Click to collapse
i don't if its possible... i think it needs some more work, to run on non-blur editions.
Dexter,
I really like this rom.
If you can fix the Flashplayer and USB issue. I think this ROM is beter then FolioMod rom.
Gtz
Jossie
Really surprised with motorola the phones that i used to have from them whore fiasco after fiasco to the point that i promised never to buy none off their products ever again even if they wore painted in gold but lately i have have seen great stuff from them and a proof is this blur rom to our beloved (thanks to you Dexter) folio... Really some nice apps from motorola like the possibility to in the browser of your pc control your device very simple...And the media server app very very easy to use...
fernando nogueira said:
Really surprised with motorola the phones that i used to have from them whore fiasco after fiasco to the point that i promised never to buy none off their products ever again even if they wore painted in gold but lately i have have seen great stuff from them and a proof is this blur rom to our beloved (thanks to you Dexter) folio... Really some nice apps from motorola like the possibility to in the browser of your pc control your device very simple...And the media server app very very easy to use...
Click to expand...
Click to collapse
+1 .. on mobiles, Blur is really kinda slow to use (except latest Defy), but with 1Ghz, it really kicks ass... its not much extra but its enough compared to a stock edition, and the fact they kept it simple and still kinda stock.
and no its not like ADW launcher, its more
Is it possible yo use the media streaming app and remote access app from this rom in ,let's say, foliomod?
Any chance will ever see gsm working on this?
I like this rom but the missing stuff from foliomod made return to foliomod1.3d anyway i am always installing new roms to explore...
keiler1972 said:
how do I get the keyboard from the FolioBlur? Can I use the keyboard in Foliomod 1.4?
Click to expand...
Click to collapse
it was possible
take the lainIME.apk + /system/lib/libjni_latinime.so and copy to your FolioMod instead after install .. it replaces the old android keyboard but it works.
Dear Dexter,
it seams your website http://dext3r.komodin.org/folio100/ is currently unavailable, do you have a mirror for the zip of this ROM ?
Thanks
JCLB said:
Dear Dexter,
it seams your website http://dext3r.komodin.org/folio100/ is currently unavailable, do you have a mirror for the zip of this ROM ?
Thanks
Click to expand...
Click to collapse
i don't have a mirror currently. seems to be down as HOST decided to mirror wiki leaks :-( bad for me..
Information
EXPERIMENTAL ROMS FOR TESTING, NOT RECOMMENDED FOR DAILY USE!
Android 2.2.1 (Froyo) ROM for Huawei 8120 aka Vodafone 845
Based on Tas0s's CM6 Port
Android 2.2.1
Kernel 2.6.29 (Kalt Kaffe)
CyanogenMod 6.2
De-odexed
Busybox
Bash
Zipaligned
Rooted
633MHz OC kernel
JIT Enabled
Fixed Google account sync/login problem
HVGA Market v2.34
Go Launcher EX (the faster Launcher with a lot of extras)
Default mms.apk replaced with Go SMS
Default browser.apk replaced with Skyfire (you can remove)
Documents To Go v3.0002
Java ME Apps support
Only Root Explorer added for file managing (be careful)
Stopwatch app included
Working:
RIL
Audio - Volume not the best, try to fix with DSP Manager
Bluetooth
Wifi
Calibration - Recommended to use it with a pen/stick
Bugs/Not working:
Camera
SDCard mount on PC - Need to use card readed till this not fixed
Key lights
Missing aGPS
Missing FM Radio image
Ext2 filesystem on SD Card not supported
Installation
1. Flash a recovery image (tested with AmonRA and ClockworkMod too)
Method #1
2.a Copy the .zip file to your MicroSD card and boot the phone into recovery mode (call+volume-up+power)
Method #2
2.b Put device in recovery mode and start msusb and with adb or adb-windows
-----adb shell mount /sdcard/
-----adb push romFILE.zip /sdcard/
This method allways pushed properly onto sdcard no read errors
3. Choose "Flash zip from sdcard" and choose the zip you just copied.
4. Wipe data+cache before rebooting if it the first install of this ROM. When upgrading with future updates you propably won't need to wipe again.
OR
Install Superboot (via Windows PC)
Download Superboot: DOWNLOAD (MediaFire) / MIRROR (ROMraid / CoBlitz) and extract to a directory
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS - double click 'superboot-windows.bat'
Phone will startup, seems to hang and eventually reboots itself.
Root the V845 (via Windows PC)
Download AmonRA Recovery 1.6.2: DOWNLOAD (MediaFire Pro) / MIRROR (CoBlitz / ROMraid) and extract the zip file
Enter recovery mode by turning your device on while holding down 'volume down' and 'End call' (red) then powering on your device.
Note: The hourglass (zandloper) stays on the home screen
WINDOWS PC - (ensure the V845 is connected via USB) double click 'install-recovery-windows.bat'
then run in cmd
fastboot-windows.exe reboot
or
Remove battery and start phone (not sure how to do this otherwise)
FIRST MAKE NAND BACKUP IN RECOVERY - Power + Volume Up + Call
WIPE RECOMMENDED!
DOWNLOAD LINKS:
FroyoBit v1.95 (CM6) - Not tested!!!
FroyoBit v1.8 (CM6)
FroyoBit v1.6.06 (AOSP)
FroyoBit 1.42 (based on Anryl's Froyo ROM R20.2)
Default Black clock color on notibar
Recommended White clock color on notibar - not tested
Original vodafone 845 ROM downloads:
Original Vodafone ROM
Original Vodafone Recovery
UPDATES:
v1.0 - Initial release
v1.42 - Last and best release on Anryl 20.2 base (bad calibration, dpad not working 2.6.32 kernel, 710MHz OC)
v1.6.06 - First & last AOSP based release (Android 2.2.2, 2.6.29 kernel, 710MHz OC, SD Card not mount on PC, No Camera, No radio, broken dialer layout, bad sensors)
v1.7 - First CM 6.2 based release, not recommended to use
v1.8
- Fixed dialer and contact list layout
- Fixed Desktopclock app layout
- Added gallery app
- Added Zeam Launcher, removed ADW
- Several app updates
v1.9
- Zeam changed to Go Launcher EX
- Mms.apk removed, added Go SMS
- Removed Advanced Task Killer (Go Launcher got built-in Task Killer)
- Added ROM Manager (Recommended to use ClockWorkMod Recovery - Attached in first post)
- Market updated to 2.34
- Removed LatinIME (built in keyboard, now you can Install and use any other what you want)
- Added Smart Keyboard Pro
- Removed CarHome
- Added Smooth Iris Theme
kuci06 said:
awesome!
I see that you are trying to integrate the honeycomb player, which would be cool, but... wouldn't that require some kind of 3D acceleration? (like the 3DGallery app, which is kinda slow on this phone)
(also, if we are talking about "honeycombing" the phone...some more honeycomb stuff that could get ported to 240*320)
honeycomb-style locksreen
honeycomb boot anim
Click to expand...
Click to collapse
Thx I will check what can I do, 3D Gallery was slower on 2.1, now much better, but not the best
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
H3pha3stus said:
Hi Bitye,
This ROM looks very promising, looks like you are integrating some great components, I will keep an eye on this and test once the screen issues and D-pad issues are resolved. In the mean time do you think you could put some screenshots or a video link up for us to have a look?
Cheers
H3pha3stus
Click to expand...
Click to collapse
i will upload some screens later, now I am at work.
Hajrá, eddig ez a legjobban működő ROM!
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
martin_nolimit said:
i can regular install this rom, and reboot after install. Then we know it comes the setup wizard. Well done, after some steps if I touch forward before setup complete, it comes an error message. After them the screen keeps black. What to do??? I think this rom is still buggy
Click to expand...
Click to collapse
I think this will be Zeam configuration problem, I working on it will be fixed in 1.4 today. I am at work as always now, after 8:00 PM CET.
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
engenek said:
hi bitye, your roms is very fantastic, but ihave a problem, this problem is enter number on dialpad but not search in phonebook
Click to expand...
Click to collapse
Ok, I will change the dialer app too.
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
cedric123 said:
Nice you are making a ROM too but the problem with all roms is that they all got the same bugs but tas0s said he fixed it!
i hope you will fix the bugs too...
Click to expand...
Click to collapse
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
bitye said:
I think he only fixed the wifi and finished his GIT, will check when share something, I make a quick fix for my as 1.4 than start to check the framework. I tried the final wifi fix too, but on-Phone permission changes worked for me, compiled not :S
Click to expand...
Click to collapse
Can you make a zip for fixing the permission or a guide how to do this?
cedric123 said:
Can you make a zip for fixing the permission or a guide how to do this?
Click to expand...
Click to collapse
Tas0s shared a link what have to be enought for fix I think,
http://forum.xda-developers.com/showpost.php?p=11748559&postcount=223
I tired, but start to check it If ok I will share if somebody not finish before me
1.42 released
Now I am going to try Tas0s repo, next time will release on new kernel, if camera fixable
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Jocco said:
I tried your rom, but I get the "The application Setup Wizard (process com.android.setupwizard) has stopped unexpectedly. Please try again" error that I have to press force close a few times to get rid of right after the Google sign in process. I did wipe factory reset, but it doesn't help. Have you got any idea?
Click to expand...
Click to collapse
I haven't got problems like this, and always do full wipe and try the ROM before upload it, but I try to check that apk.
++ Installed on my friends phone w/o any problems
Szia!
Nagyon jó a romod "1.42". Wifi nek kell néha restart de jó, GPS jó , bluetooth jó, telefon jó , taskbár jó, böngészőt kellett újrarakni azóta jó.
Szerintem Király vagy.
Sorry for my bad english!
Wifi goood sometimes need restart, GPS good, Bluetooth good, taskbar good,
browser need reinstall good. This room very goood! Gratulation!!
Did I understand good,D-pad and optical butons are disabled?????
kuci06 said:
disabled, because it causes freezing
Click to expand...
Click to collapse
Will be fixed in AOSP based version
This is my first port ever so any advice, feedback is appreciated.
I'm not a developer, I just want to learn and I found that doing this port was not too difficult. So if anyone feels like helping me out learn about porting, etc then feel free to contact me.
I decided to open this thread for better support and faster feedback as I'm planing to keep it as up to date, bug free as my skills and time permit.
Well the official website for the rom is LewaOS
Credit: Thanks to xj220gt, for his initial port that got my interest, to the CM team since I'm using their roms as a base, and to whoever else credit is due.
New baseband = March 11 2012
Old Baseband = July 2011
Click to expand...
Click to collapse
Download links:
Code:
[B]Current released version:[/B]
[URL="http://www.mediafire.com/download.php?zntk35vbbd72f2n"] LewaOS-R.282_13.01.09[/URL]
[B]Old version:[/B]
[URL="http://www.mediafire.com/download.php?ri1kw4uvfpy0mye"]R.282 LewaOS Turbo 05/10/2012[/URL]
[URL="http://www.mediafire.com/download.php?wt2k7z9reqs0dj6"]R.282 LewaOS Turbo 20/07/2012[/URL]
[URL="http://www.mediafire.com/?5w1zqc1jceb1p4l"]R.282 LewaOS RC3[/URL] (New Baseband)
[URL="http://www.mediafire.com/?vhc9gbvyvnb1112"]R.282 LewaOS RC3[/URL] (Old Baseband)
Screenshots!
Check my Gallery
The tutorials have been moved to the third post.
Changelog
Changelog:
January 8th, 2013
Code:
[QUOTE]
LewaOS-R282-13.8.1 testing
Removed some bloat
Updated to the latest version of cm and lewa.
[/QUOTE]
[U]June 4th, 2012
Code:
[QUOTE]
LewaOS-Base-release_nBB
Port based on released 2012/3/22 of Lewa OS for HuaWei X5 (U8800x) suit for kernel 2.6.35.7
Base rom is CM7.2 nightly from 06/03/2012
[B]Added:[/B]
CM camera
ES Explorer
Quickpic latest version
CM voice dialer
CM wallpapers
Support for livewallpapers and a few stock ones from CM
ADW launcher
Term emulator
Gallery 3d (quickpic recommended unless you want picasa photos support)
[B]Added wifi calling[/B]
LGEservices
mms apk
cm music
ROM manager
superuser
Torch
[B]Not working:[/B] Camera blacks out.
Big thanks to jookdakang23 for pointing me out to a more stable build to port from.
[/QUOTE]
[/U]
June 5th, 2012
Code:
[QUOTE]
LewaOS_R.282_p999-RC1-nBB
Port based on released 2012/3/22 of Lewa OS for ZTE Blade v880
[B]Features:[/B]
Deodexed
Zipaligned
updated host to block many adds (like with adblock)
[B]Added apps:[/B]
ADW Launcher (just in case)
Android Terminal
ES File Explorer 1.6.1.6
Gallery 3D (Quick pic recomended)
Wifi calling
LGE services and support for live wallpapers
CM wallpapers
CM live wallpapers
CM mms app (just in case)
Quickpic 2.3
Rom Manager
Torch app
Voice Dialer
Everything stock is working
[/QUOTE]
June 6th, 2012
Code:
[QUOTE]
[B]LewaOS_R.282_p999-RC2[/B]
Port based on released 2012/3/22 of Lewa OS for ZTE Blade v880
Removed ADW Launcher (Not needed and dont fully work, install from market if you want it.
Removed lewa bloat (chinese market, etc)
Removed Quickpic (it was not launching) Left stock one
Odexed (deodexing it gave me a low probability of getting everything to work, maybe for RC3 I'll try again.)
zip aligned
custom host to block adds
[/QUOTE]
Code:
[B]LewaOS_R.282_p999-RC3[/B]
Removed some bloat.
Added support for /data/app (gives user the ability to remove those apps without need for root.)
Updated Lewa launcher
Fixed contact picture issue
Fixed double txt
Deodexed
adds blocked
Added some apps I think are useful but can be easily removed.
Click to expand...
Click to collapse
June 8th, 2012
Code:
[B]LewaOS_R.282_p999-12.06.08[/B]
Optimized
New interface
Latest version of LewaOS
Stable version
Added wifi calling
From now on, I will update weekly unless some wild bugs appear or new fixes for CM bugs shows up.
[SIZE="5"][B]LewaOS Bugs:[/B][/SIZE]
[B]Confirmed:[/B]
Mobile Network Settings is completly white.
Video Recording not working.
No option to change lockscreen.
Settings crash when changing call settings.
Loock screen is partially in chinese
[B]Not Confirmed:[/B]
Pulling down notification bar makes the bar goes down then back up.
Wallpaper crashes.
No root?
Click to expand...
Click to collapse
LewaOS Official Changelog
Code:
SMS
- Optimized MMS paperclip symbol to show the incomplete
- Optimize the interface of the instant messaging pop-up box
- Optimize a new message, a common point of contact listed rules
- Optimization in the SMS settings SMS instant suggestions "to" information immediately prompted
- Optimize the removal of the SMS in SMS settings limit and MMS restrictions
- Fixed a bug where after repeated contact with a contact, when the new message, commonly used contacts will show repeated
- Repair information address, use Baidu input method to enter the word, click the Delete key, contacts stored FC
- Repair contact information is still being saved as a draft
- Repair response through instant messaging frog letter, the state in its session interface has been "sent ..."
- Add existing contacts to repair bulk SMS search interface can not use Family Names
- Repair the music player interface, Sogou input method to reply to instant messaging, replies finished keyboard does not automatically recover
- Repair contact only with a number of text messages, re-edit the new SMS, add a contact does not have this number of automatic memory
System
- Repair boot sometimes get stuck in the "Music Experience" interface
- Fixed connection WiFi, enter the WiFi interface and then return to the WiFi will automatically disconnect
- Optimized the HVGA bottom of the phone to confirm / cancel button too much
Security interceptor
- Optimize the long number of pop-up option box in the white list interface, increasing the "Move to blacklist feature
- Repair will receive spam messages are added to the blacklist, and then the numbers go to the white list to return to the message list, press and the number should not be removed from the blacklist. "
- Optimization of telephone intercepts to add numbers to the white list, press and the number of telephone intercepts, the "Add to white list" to "Move to blacklist
Call
- Added automatic call recording function (System Settings -> Applications -> Call -> automatic recording)
- Fix non-card or no network, a normal call, it should give the user a prompt to tell the user can not call
- Fixed blocking rules set to block all numbers, outgoing calls and hang up immediately when the call icon in the status bar does not disappear
- The process of repair calls to instant messaging, and the other side hang up the phone, our instant messaging window with the switch off
- Repair a conference call, management conference call interface "return call" button font color and background color similar and difficult to see the text
Version update
- Repair to cancel on the download, click on "Download the new version of" no response
- Fixed non-WiFi to download the full package, the network cut to the next WiFi, the download can not continue
Status Bar
- Add user custom shortcut switches the display and location of the order
- Repair the data storage mode, disconnect the USB cable, re-insert the data storage mode is still open
- Repair quickly click twice on USB storage, USB storage has been closed, but in fact the USB storage to open
- Repair masked the missed call notification bar ad blocking incoming calls drop-down status bar once FC
Click to expand...
Click to collapse
How to install:
1-) Make a nandroid backup of most recent working rom. Also use titaniumbackup or similar to backup your data
2-) Wipe clean all partitions
3-) Flash the new Rom
4-) Flash GAPPS
5-) Flash your kernel (optional)
6-) Boot up
7-) Restore your apps, be mindful when restoring settings.
I know this might be a lot of work, but that is the safest way I have found to keep my data as I have lots of apps. Also You must keep your sd card files intact for this to work.
After first boot, do the initial setup, fix permissions and reboot. That is all.
What is working: Everything.
What is not working: As far as I know no issues.
Add-ons
If you want my zip with the updated camera.apk and updated libs for the new baseband then flash this. The mod was not made by me, I just updated the libs to make it work with current roms.
Gapps:
gapps-gb-20110828-signed
gapps-gb-20110828-newtalk-signed for the New Gtalk with video support.
Kernels supported: Basically anything that is for CM7.
Trinity kernels Official website
ELP-G2x-06022012 For battery saver.
T15-G2x-06022012 For better performance over battery.
Faux kernel version 054 is the latest
His kernels are here
You will need a custom recovery with support for ext4 for trinity kernels, if you want use these.
For windows: One-Click ClockworkMod Recovery NvFlasher
For Linux: CWM-Based Recovery 5.0.2.8 For P999(Internal & External SD)
Mac OS: ClockworkMod flash
Harsh Kernel: update-harsh-CM7-3.0.32-P999-0406 Download the CM7 version for p999. (Currently this kernel removes cwm so do not use for now)
Tutorials:
Original guide for porting
dsixda's Android Kitchen
The guide for the kitchen
Bonus Downloads:
CM7.2 nightly from 06/03/2012 for old baseband mod by me.
LG G2X usb drivers for windows.
How to add support for old or new baseband?
I have been asked what did I do to get the latest nightly to support the old baseband so I will just put it here.
To add support for the new baseband just get these 4 files from here.
Then You will open your rom file or just add the files to the following locations replacing old files:
1-)nvddk_audiofx_core.axf to /system/bin/nvddk_audiofx_core.axf
2-)nvrm_daemon to /system/bin/nvrm_daemon
3-)libnvddk_audiofx.so to /system/lib/libnvddk_audiofx.so
4-)libnvmm_audio.so to /system/lib/libnvmm_audio.so
This has only been tested to work with GB
If you want to provide support for the old baseband instead of the new one then just do the same, but get the files from a rom that supports the old baseband, I recommend CM7.2 RC2, it is the same process.
Click to expand...
Click to collapse
How to unbrick-upgrade or/and downgrade baseband.
Okay the first thing is to go to stock (rooted) 2.3.3 this will work for unbriking and everything. G2X_V21E_00_NVFlash The original thread can be found here.
This is good in case you brick or want to upgrade, you go to a lower version so LG tool let you upgrade.
Code:
[QUOTE="ILUHA_89, post: 17258229, member: 4234630"][COLOR="Blue"][B]ROM for recovery G2X under the NVFLASH [/B][/COLOR]
This method necessary!
If the device is not loaded and not firmware in other ways! (If you downloaded the wrong firmware in the device)
I took the unpacked program files KDZ and added to them NVFlash and created BAT file!
Download ROM: [URL="http://www.mediafire.com/?wfokxjxi7rfoaey"]http://www.mediafire.com/?wfokxjxi7rfoaey[/URL]
Mirror: [url]http://www.megaupload.com/?d=C5LBU3DS[/url]
Download APX driver: [url]http://www.mediafire.com/?k559zgjlqkd5ted[/url]
[B][COLOR="DarkOrange"] Installation Instructions: [/COLOR][/B]
[LIST=1]
[*]Download both files
[*]Unpack it to the C drive to their respective folder
[*]Remove the battery
[*]Hold Vol Up/Down (and keep them held)
[*]Insert the USB cable
[*]Install APX driver from the your APX folder
For windows 7(and vista? please confirm):
[LIST]
[*]Open Device Manager in Windows and you should see "APX Device" listed with an error
[*]Right click on the APX device
[*]Select 'Update driver software'
[*]Select 'Let me pick...'
[*]Select 'Have disk'
[*]Browse to directory you extracted the APX Driver
[*]Select the *entire* 'APX Driver' folder
[*]Accept any warnings, including the big red alert (you may need to disable UAC)
[*]Now in Device Manager under 'USB Controllers' you should have an 'NVIDIA USB Boot-recovery driver for mobile devices'
[*]If not, uninstall the driver, reboot, rinse and repeat
[*]Unplug everything
[/LIST]
[*]Hold Vol Up/Down (and keep them held)
[*]Insert USB cable
[*]open your ROM folder:
[*]Run Flash.bat file and wait for the process
[*]After the logo appears on the LG phone
[*]Unplug USB cable
[*]Insert the battery
[*]enjoy!
[/LIST]
After that, I recommend to firmware device with help programms KDZ or LG Mobile Update[/QUOTE]
Now we need to download the kdz files.
The V21Y_00 update (LG T-Mobile branded Android 2.3.4) can be found here and the Original thread
Use this file for upgrading to the newer baseband.
For downgrading go to this thread on the first post, if you have a T-Mobile phone download this one if not the the other.
From this thread download the offline tool
This tool will let us upgrade or downgrade.
Now the thread provide instructions but many people get lost even with the pictures because there are basic yet important steps he misses.
1-) Unzip the tool.
2-) go to start menu and look for wordpad, do a rick click and run as administrator.
3-) Opend wordpad as administrator, from it, open up the “host” file is under C:\windows\system32\drivers\etc\ or %systemroot%\system32\drivers\etc\ at the bottom add 127.0.0.1 csmg.lgmobile.com.
4-)open cmd.exe as administrator, cd to the unzipped directory and run Automatic Offline Procedure.vbs
To open cm or wordpad as administrator you have to do a search in the menu bar and then a right click and select "run as" or "run as administrator"
5-) The script will install 1. MSXML 4.0 SP3 Parser, let it do it.
6-) The script will also run 2. “windows enabler.exe”, on the status bar (usually right lower corner) a new icon will show up, do a left click and make sure it says on.
7-) 3. Enable the phone’s “USB debugging” mode (menu>settings>applications>development>USB debugging), connect the phone to PC and wait for drivers to be loaded.
4. Run "UpTestEX_mod2_marwin.exe" if the script dont already start it. It usually does.
9-) Despite of what the original guides says, the only thing you need to change is select the kdz file.
10-) Press "Normal web upgrade test" > upgrade start >
11-) Select: Clear Phone Software update registry, Select "Different Country" and select your Language. Click <OK>
12-) Ignore any message saying to check the internet and run again, this is good.
13-) Wait until it finishes. If it gives any message that the phone is not connected or something like that, disconnect it, turn it off, remove battery and plug it back holding "Volume Down" key. (Automatically goes to Upgrade mode).
That's it. The same process to upgrade or downgrade.
The last step is to flash cwm. Use the link I provide in this same post.
Click to expand...
Click to collapse
Most of these stuff is not mine so instead of repeating everything on my own words and add my part, I just use what is there and add my part and provide links to where I got the info or files from. This is my way of giving credit to where it is due without having a list of the names of everyone related or unrelated.
Is wifi calling working with this rom?
Sent from my LG-P999 using xda premium
cervantesjc said:
Is wifi calling working with this rom?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Yes it is, I just added the changelog.
I seriously need to get the standard format the devs use.
Rafase282 said:
Yes it is, I just added the changelog.
I seriously need to get the standard format the devs use.
Click to expand...
Click to collapse
Thanks, I'll give it a try, I need wifi calling, just because I have no reception where I live.
Sent from my LG-P999 using xda premium
cervantesjc said:
Thanks, I'll give it a try, I need wifi calling, just because I have no reception where I live.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
I just found out that the lewas dial app crashes when you receive a call. I was testing wifi calls, so the good news is, it works, the bad news is, I'll have to change that app and re-upload.
hey op, just some advice, you should add in the op screenshots, what kind of rom this is, and its features etc. cuz most of us cant read chinese
Removed file, I'm going to start over. I broke data while playing with changing the dial apk.
does bluetooth call audio work with this ROM? it didnt work in the latest CM...
BuddhaTeh1337 said:
does bluetooth call audio work with this ROM? it didnt work in the latest CM...
Click to expand...
Click to collapse
If it did not work on CM7.2 Nightly from 05/27/2012 then there is a high chance that it will not work as it is based on that.
I'm currently testing a build. When changing the phone.apk and its odex file for the phone.apk from cm it seems my data is gone and dialers crash at boot. Currently trying to figure out how to fix it.
After much struggle I decided to start completely clean. So I got the data working again but the dialer would crash when incoming calls.
Now I'm going to try to replace the phone.apk for the CM one. If that works then soon enough I should have a "stable" version soon.
There is a new initial release, check changelog for more info.
I'm still unable to replace the crappy dialer app from this rom, ugh!
Still working on finsding a solution. If anyone could help me with showing me how to deodex this rom, and even better, how to replace the dialer app without breaking data, please let me know.
Edit: ALso I just finished reuploading, this time I changed the chinese apps for better ones eventhough dialer issue still persist. AT last that would be a better initial release than just pure stock Lewaos.
Keep us updated. The dialer messenger combo is kind of cool, if I was able to make calls...
Sent from my Android powered coffee coaster.
How i disable lockscreen, so i can add widgets on home screen in Lewas OS rom? Because every time i pressed the screen it locks and dont let me add widgets.
Sent from my LG-P999 using xda premium
sleepingturtle said:
Keep us updated. The dialer messenger combo is kind of cool, if I was able to make calls...
Sent from my Android powered coffee coaster.
Click to expand...
Click to collapse
With the stock I was able to make calls with both wifi calling and without. The problem is to receive it.
I'm not that popular either way so I could go without it for a while
chipis said:
How i disable lockscreen, so i can add widgets on home screen in Lewas OS rom? Because every time i pressed the screen it locks and dont let me add widgets.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
Well normally on the lewaos launcher, you just press and hold the screen, then a menu will appear at the button, select widgets, then above that menu the available widgets will show up.
The closest setting I see for lockscreen is on settings>personal>themes<customize> then you get lockscreen and its wallpaper.
Support for themes is fully working. But you need to use the default launcher to see the changes not adw launcher.
Aside from this, I'm not quite sure what is your issue as I can get widgets just fine.
Rafase282 said:
Well normally on the lewaos launcher, you just press and hold the screen, then a menu will appear at the button, select widgets, then above that menu the available widgets will show up.
The closest setting I see for lockscreen is on settings>personal>themes<customize> then you get lockscreen and its wallpaper.
Support for themes is fully working. But you need to use the default launcher to see the changes not adw launcher.
Aside from this, I'm not quite sure what is your issue as I can get widgets just fine.
Click to expand...
Click to collapse
Thanks i got it!
Old baseband version coming soon. Hopefully this one will be stable. I'm planing on using the latest nightly and remove support of the new baseband to make it work with the old one.
Also I have a untested ICS rom Genesis Beta 9 with support for the new baseband, and updated kernel modified by me. So I'll be going back to the new baseband to test that rom
Yayyyyy,hopefully dialer can be resolved. The Wi-Fi calling apk is in this correct?
Sent from my LG-P999 using Tapatalk 2