Been away from the forum for quite some time. Has a solution to the SOD/RR issue been found yet?
Team EOS 3 Jelly Bean with Roach's stock kernel fixed all the issues for me. As for the latest Asus firmware most don't have issues but some still do.
Yeah it all depends on the ROM/kernel you're using.
No SOD for me with Megatron ROM and Guevor's kernel
Related
Curious if anyone else is experiencing bad flash performance after upgrading to ICS? I've done the factory reset etc.. Still no improvement. To clarify, no improvement in my ability to stream from amazon VOD etc. Coming from prime with OC kernel where everything was smooth as butter - this is frustrating. I'm running on a first gen tft101..
Issue resolved
If you are experiencing similar issues with flash/video streaming do a full wipe and install Revolver 4 by Gnufabio | 4.1.0 Stable, the new NVIDIA drivers and guevor's latest kernel.. Revolver 4 combined with guevor's kernel is by far the fastest and most reliable ICS experience I've had - and I've tried all popular ROM's. I've had NO issues since upgrading and battery life is excellent.
Bye bye HC hello ICS!
Thank you Gnufabio and guevor for all your hard work!
Guevor's kernel on any of the ICS roms does the trick x)
I keep flashing and flashing kernels.
Air
Matrix
Steve Garon
Trinity
Franco
etc
etc
Does anyone use an older dated kernel of any of these on any ICS ROMS and have such stability and good battery life that they are unwilling to upgrade to anything else ?
If so, what is your combination and setup ?
Thanks
Griff
airkernel 3.0 is what I use http://forum.xda-developers.com/showpost.php?p=21935053&postcount=1 its been good to me
aokp m4 airkernel 3.0 65fps-blue colors
Speedy-4 by eugene373
I'm quite happy with the stock CM9 kernel. What ROM are you using? Have you tried sticking with it's stock kernel? There's generally a reason the ROM dev chooses the kernel they do.
I have had good results with CM9's stock kernel and the Air kernel for ICS. I had instability with matr1x and trinity.
Im using franco's 1.1 and while it's very bare bones (no bln/bld/voodoo/oc etc) the kernel performs amazingly well and I couldn't be more pleased. I got tired of reboots with other kernels and haven't suffered even a single one yet.
Sent from my Nexus S 4G using Tapatalk
Hello everyone. I have been using cm9 rc2 since it dropped. I must say overall it's pretty great. I wanted to use a different kernel than the default but just can't seem to get one working. The main reason I want to change kernel's is because I'm getting random reboots and SOD. I have flashed all variants of guveor's kernel and the best I get is wifi flashing on and off with the aokp variant. Harmony kernel doesn't have working wifi and those are the only kernels that are apparently available. Anyone have any luck?
I've tried all the 4.2 ROMs I know of (CM 10.1, EOS 4, ORCA 2). CM won't boot on my Xoom, EOS and ORCA stutter and are just miserable to use.
So I am back to running CM 10.0. I like it but I am not in love with it. I've also tried EOS 3.0. I like the kernel better, but I prefer CM to EOS overall. Are there any other 4.1 based ROMs out there, or are there any other kernels for CM 10 aside from the one which comes with CM? I'd like to run the lagfree or SmartassX (or is it Smartass2) governor.
If anyone has links to other ROMs / Kernels which are 4.1 / CM 10.0 that would be much appreciated.
Maybe try Dreamcwli's My Android, its 4.2 but it is the fastest ROM for me
4.2 also has 2 custom kernels available, Shield kernel and ElementalX. Both are good.
ElementalX has a CM compatible version now. Shield is AOSP only
So you could try all the roms again with the new kernel
Sent from my Xoom using Tapatalk 2
Hoochie_Coochie said:
Maybe try Dreamcwli's My Android, its 4.2 but it is the fastest ROM for me
4.2 also has 2 custom kernels available, Shield kernel and ElementalX. Both are good.
ElementalX has a CM compatible version now. Shield is AOSP only
So you could try all the roms again with the new kernel
Sent from my Xoom using Tapatalk 2
Click to expand...
Click to collapse
Sadly ExperimentalX does not work for me at all. I never get past the boot animation screen. I've tried the regular version on EOS4, and the CM version on CM 10.1. Actually, I can never ever get 10.1 to come up even with stock kernel. I will give My Android 4.2 a try, but with my lack of luck with CM 10.1, ORCA and EOS4 I honestly am not holding out any hope for My Android to work.
I am not sure what the issue is with my XOOM and what 4.2 items are out there right now. My XOOM was one of the very first as I got it when they hit the street, so perhaps there is slightly older / less stable hardware (i.e. cannot support GPU OC) which causes issues with 4.2.
I've unlocked the 4.1.1 JB bootloader and proceded to flash cm10.1
I'm under the belief that the stock kernel is out of date and I'm looking for a kernel update. Some hints in the right direction would be very helpful.
kingkira said:
I've unlocked the 4.1.1 JB bootloader and proceded to flash cm10.1
I'm under the belief that the stock kernel is out of date and I'm looking for a kernel update. Some hints in the right direction would be very helpful.
Click to expand...
Click to collapse
As far as I know, CM10.1 is not compatible with ASUS stock kernels. CM10.1 runs on it's own Cyanogenmod base kernel. So your choices for alternative TF300T cm10.1 kernels are:
1. Perf Kernel based on Franco by chrmhoffmann: http://forum.xda-developers.com/showthread.php?t=2182956
2. Unofficial CM10.1 by surdu with his own modified CM10.1 based kernel: http://forum.xda-developers.com/showthread.php?t=2112369
I would recommend using the Perf Kernel based on Franco by chrmhoffmann, if you're on official cm10.1.
Oh okay thanks for the help! For some reason during the portait mode on my tablet it have a lot of lagg issues. do you think you have a solution?
kingkira said:
Oh okay thanks for the help! For some reason during the portait mode on my tablet it have a lot of lagg issues. do you think you have a solution?
Click to expand...
Click to collapse
So far, I haven't encountered lag issues exclusive to portrait mode. I have used CM10.1 nightly up to April 13. Then, I switched to unofficial AOKP and CM10.1 by surdu. But, due to quick battery draining issue with surdu unofficial AOKP, I went back to stock ASUS rom for a while. And, finally decided to try CROMI 4.3 and am now on CROMI 4.4.1, which are based on ASUS stock ROM and kernels.
I can't say I have seen lag issues on portrait mode during my switching of kernels and ROM. My guess is that your lag issue might be caused by a particular app or some combination of apps.
When tinkering around with GMT gesture control, with the status bars off the portrait lag disappeared. I'm not sure what the cause is :/.
I've ran the Perf kernel with CM10.1 plus the Franco app. It's a great combination. Just make sure you turn the speed down when you don't need it or it will eat up your battery pretty quick.
Sent from my LG-LG855 using Xparent SkyBlue Tapatalk 2