Hi,
Do any of you 750 owners have seen this before?
Lately (a week or so ago) I started to get calls and the "notification" popup won't come up. I hear the ring and vibrate and there is a phonecall icon on the top bar next to the data arrows but the notification is missing so I can't see who's calling.
If/when I answer I can finally see the caller information.
This doesn't happen with every call (probably with about half of them per day).
Any idea or did you hear about something similar?
Thanks,
Zax.
Haven't had that particular problem, but I've had other issues when calls come in.
Sometimes (after I've put the device from silent to regular mode using the top slider) the phone doesn't ring and doesn't vibrate although the call notification is showing on screen. This gets fixed after one or more soft resets.
On a fair few other occasions - this is intermittent and extremely annoying - the phone doesn't react at all when someone calls me (no notification, no vibrate, no ring - nothing) but I get a audible and visible missed call notification after the caller has given up / been diverted to voicemail. This problem goes away of its own accord eventually; restarts don't seem to have any effect.
Seriously, if this device wasn't a fairly good PDA as well as a phone, I'd put it in the bin.
Hello, I am currently using clean rom 1.1 but I know this is a standard feature in stock.
When you make a call while connected to a Bluetooth headset their is a screen that pops up that shows you the different choices you have to connect the call. The Bluetooth I am currently on or I could choose the Phone or speakerphone I believe.
It is a popup that says Audio Source.
My problem is sometime I call somebody I didn't mean to call and I cant end the call fast enough because that popup screen stays on for like 2 seconds.
So, is there a setting I am missing to get rid of it or something else I could try I am rooted and s off.
Thanks...
cardman827 said:
Hello, I am currently using clean rom 1.1 but I know this is a standard feature in stock.
When you make a call while connected to a Bluetooth headset their is a screen that pops up that shows you the different choices you have to connect the call. The Bluetooth I am currently on or I could choose the Phone or speakerphone I believe.
It is a popup that says Audio Source.
My problem is sometime I call somebody I didn't mean to call and I cant end the call fast enough because that popup screen stays on for like 2 seconds.
So, is there a setting I am missing to get rid of it or something else I could try I am rooted and s off.
Thanks...
Click to expand...
Click to collapse
Can't you simply end the call with your Bluetooth device?
Freedom First said:
Can't you simply end the call with your Bluetooth device?
Click to expand...
Click to collapse
I suppose I could do that but my headset has small buttons it would probably be just as fast to wait for the popup to go away.
I don't recall this kind of popup in any of the previous phones I owned. Just a minor annoyance..
I have the same complaint.
My call log has fairly small text and so if not careful could touch the entry next to the intended entry.
AND because the audio source popup is in the way I can't see who I'm calling until the popup goes away.
AND the phone has already started ringing by the time it goes away.
I'm simply asking if there is a way to disable this popup???
My phone app itself has a simple way to change audio source if I want ...
The following problem happens every time. If I am in a call and a another call comes in I get that bip in the headset. I look at the screen and see the 2nd caller, with a few options like answer, reject, etc.
The problem is that if I don't touch the screen and just let the 2nd caller keep calling, when I put the phone to my ear to continue the first conversation, the phone automatically switches to the 2nd call and puts the first one on hold.
This is incredibly annoying and even put me in cumbersome situations because the 2nd caller was on without me knowing it.
I can replicate this every single time, my sister as well on her Z3 compact, so it's a software problem.
Any solutions?
If anyone else has this problem just deactivate smart call handling from settings. Problem solved. Unfortunately we lose the smart answer as well.
Hi all,
I am having an issue with my Galaxy S6 Edge+ with Bluetooth forcing the speakerphone when I am making a call and driving. This has just starting occurring since the Nougat update. If someone calls me I can still answer from the head unit and the Bluetooth works perfectly. The issue is when I make a call and press the steering wheel Bluetooth button. When I do this and say the name of the person to call I get the voice command saying "Calling so and so mobile...ON SPEAKERPHONE". It says it's calling the person but then says ON SPEAKERPHONE.
What is interesting is I played around with different settings, reset my phone, unpaired and repaired, and still the same issue since the Nougat Update. But what is interesting is that I found if I make a call while my screen is active (screen is on), and I make the same Bluetooth call, I can see the google voice icon pop up on my phone, the call is made CORRECTLY, through Bluetooth. However, if my screen is off and I make the call, it ALWAYS reverts to speakerphone. So as long as I touch my phone to make the screen active for 5 or 10 seconds or whatever I have the screen set to, as long as the screen is on the Bluetooth always performs correctly. I can not figure out how to prevent the speakerphone from being the primary source when the phone screen is off and I make a Bluetooth outbound call.
Again, if someone calls me, it doesn't matter if my phone is locked, screen is off or on, the Bluetooth always works fine. Any suggestions on how to fix this? Any help is very much appreciated. Thank you.
ItzTime said:
Hi all,
I am having an issue with my Galaxy S6 Edge+ with Bluetooth forcing the speakerphone when I am making a call and driving. This has just starting occurring since the Nougat update. If someone calls me I can still answer from the head unit and the Bluetooth works perfectly. The issue is when I make a call and press the steering wheel Bluetooth button. When I do this and say the name of the person to call I get the voice command saying "Calling so and so mobile...ON SPEAKERPHONE". It says it's calling the person but then says ON SPEAKERPHONE.
What is interesting is I played around with different settings, reset my phone, unpaired and repaired, and still the same issue since the Nougat Update. But what is interesting is that I found if I make a call while my screen is active (screen is on), and I make the same Bluetooth call, I can see the google voice icon pop up on my phone, the call is made CORRECTLY, through Bluetooth. However, if my screen is off and I make the call, it ALWAYS reverts to speakerphone. So as long as I touch my phone to make the screen active for 5 or 10 seconds or whatever I have the screen set to, as long as the screen is on the Bluetooth always performs correctly. I can not figure out how to prevent the speakerphone from being the primary source when the phone screen is off and I make a Bluetooth outbound call.
Again, if someone calls me, it doesn't matter if my phone is locked, screen is off or on, the Bluetooth always works fine. Any suggestions on how to fix this? Any help is very much appreciated. Thank you.
Click to expand...
Click to collapse
Seems to me that the wakelock for Bluetooth calling is set to be inactive while screen is off. See if you can find that wakelock or some other wakelock that would disable Bluetooth calling and switch it so that screen off does not interfere.
Sent from my SM-S903VL using Tapatalk
@ droidriven, thank you for your reply. I have never heard of wake lock before, is this an option within settings on my Galaxy S6 Edge+? I never had this issue with prior OS's but with Nougat this issue immediately became present. If you could lead me in the right direction where I might find the wake lock setting for Bluetooth, I would greatly appreciate it. Thank you again.
it looks like you are on to something. I checked this again and anytime I make a call via Bluetooth voice command and where my screen is off, I hear the automated voice command say calling so and so....on speakerphone....but when it says this, the screen stays locked and does not activate on the voice/Bluetooth command to call. I am using google voice and see no settings for wake lock or anything similar but I have pinned this down to anytime the screen is off, the voice command/Bluetooth always go to speaker phone. If someone calls me, it always works correctly, but that is because when someone calls me, my screen automatically engages/turns on.
Anyone else have this issue? It's definitely a problem and dangerous to have to grab my phone to turn it on or unlock it before making a voice/Bluetooth call. Any help to fix this would be appreciated. Thanks in advance.
ItzTime said:
it looks like you are on to something. I checked this again and anytime I make a call via Bluetooth voice command and where my screen is off, I hear the automated voice command say calling so and so....on speakerphone....but when it says this, the screen stays locked and does not activate on the voice/Bluetooth command to call. I am using google voice and see no settings for wake lock or anything similar but I have pinned this down to anytime the screen is off, the voice command/Bluetooth always go to speaker phone. If someone calls me, it always works correctly, but that is because when someone calls me, my screen automatically engages/turns on.
Anyone else have this issue? It's definitely a problem and dangerous to have to grab my phone to turn it on or unlock it before making a voice/Bluetooth call. Any help to fix this would be appreciated. Thanks in advance.
Click to expand...
Click to collapse
Go to PlayStore and do a search for:
Wakelock Detector
Wakelock are system processes and don't have a "setting" to manage them.
Use this app to find the running wakelocks, if you track it down you can then look for a way to manage it the way you need it to work. It works with root and without, instructions for without root are in the link.
https://forums.androidcentral.com/showthread.php?t=571286
Then read this to understand wakelocks
http://www.guidingtech.com/45384/android-wakelocks/
Sent from my SM-S903VL using Tapatalk
Droidriven,
I have a little more info on this issue. I did more research and realized somehow my "S VOICE" app was disabled so I enabled it and right away this issue was fixed! With S VOICE enabled, anytime I use the voice recognition button to make a call the screen on my phone immediately activates and the call works without going to speaker phone. With S Voice I can at least use the voice recognition button to make a Bluetooth call while driving and not have to worry about the call going to speakerphone.
The only issue I have noticed is it appears S VOICE isn't as accurate as google voice and google voice worked perfectly for me before the Nougat update. Now that I've isolated this issue to google voice where the screen will not activate when using the voice recognition button on my steering wheel to make a Bluetooth call and which causes all calls to go to speakerphone.....is this still something this wakelock detector may fix? My phone is not rooted and I have downloaded the non-rooted version of wakelock detector, I just don't know if it's going to help or not. It's odd that google voice worked fine prior to the Nougat update, whether my screen was off or locked when using Bluetooth and now all of a sudden this issue is present.
Any suggestions on this now that we know it's only google voice that has the problem and not S VOICE?
ItzTime said:
Droidriven,
I have a little more info on this issue. I did more research and realized somehow my "S VOICE" app was disabled so I enabled it and right away this issue was fixed! With S VOICE enabled, anytime I use the voice recognition button to make a call the screen on my phone immediately activates and the call works without going to speaker phone. With S Voice I can at least use the voice recognition button to make a Bluetooth call while driving and not have to worry about the call going to speakerphone.
The only issue I have noticed is it appears S VOICE isn't as accurate as google voice and google voice worked perfectly for me before the Nougat update. Now that I've isolated this issue to google voice where the screen will not activate when using the voice recognition button on my steering wheel to make a Bluetooth call and which causes all calls to go to speakerphone.....is this still something this wakelock detector may fix? My phone is not rooted and I have downloaded the non-rooted version of wakelock detector, I just don't know if it's going to help or not. It's odd that google voice worked fine prior to the Nougat update, whether my screen was off or locked when using Bluetooth and now all of a sudden this issue is present.
Any suggestions on this now that we know it's only google voice that has the problem and not S VOICE?
Click to expand...
Click to collapse
According to this and many other links I checked out, this is a common issue due to G Voice and S Voice incompatibility.
https://www.androidpit.com/ok-google-is-not-working-here-s-how-to-fix-it
Sent from my SM-S903VL using Tapatalk
Hi,
When I answer from headset the phone app takes the front and unwanted keys are activated like mute, dialing, etc.
I have lock pattern set but still.
How can I prevent it?
Thanks,