Hello together,
i tryed without success to get iGO started on my htc one S. The last weeks i read a lot of howtos and information
but i was not able to fix the problem. As i know i have to install it on the internal sdcard and put all
program files and folders also into a folder in the root directory on the sdcard called "iGo".
When try to start the app iGO it just says "iGO is loading" and a black screen is shown.
It look like the app is running but it shows only a black screen.
Maybe the "sys" file has the wrong solution setting and it cant show the gui?
Thanks for any help!
Read this somewhere - you need to edit the sys.txt on the phone (/data/data/com.navngo.javaclient/...) and this requires root.
The following settings are working fine, nothing else needs to be changed - just pick the one which suits you.
- notification bar still visible
[rawdisplay]
driver=engine
screen_x=896
screen_y=504
screen_x2=540
screen_y2=856
screen_xy="960_540:896x504/540x856"
- notification bar obscured (full screen for IGO)
[rawdisplay]
driver=engine
screen_x=888
screen_y=540
screen_x2=540
screen_y2=896
screen_xy="800_480:888x540/540x896:fullscreen"
airwave88 said:
Read this somewhere - you need to edit the sys.txt on the phone (/data/data/com.navngo.javaclient/...) and this requires root.
The following settings are working fine, nothing else needs to be changed - just pick the one which suits you.
- notification bar still visible
[rawdisplay]
driver=engine
screen_x=896
screen_y=504
screen_x2=540
screen_y2=856
screen_xy="960_540:896x504/540x856"
- notification bar obscured (full screen for IGO)
[rawdisplay]
driver=engine
screen_x=888
screen_y=540
screen_x2=540
screen_y2=896
screen_xy="800_480:888x540/540x896:fullscreen"
Click to expand...
Click to collapse
I try to install the iGO Primo, but same black screen is shown.
If someone could give me an already tested sys file and apk for HTC One S.
cosmindnl said:
I try to install the iGO Primo, but same black screen is shown.
If someone could give me an already tested sys file and apk for HTC One S.
Click to expand...
Click to collapse
work on hts one s:laugh::laugh::laugh::laugh::laugh:
---------- Post added at 08:18 AM ---------- Previous post was at 08:13 AM ----------
cosmindnl said:
I try to install the iGO Primo, but same black screen is shown.
If someone could give me an already tested sys file and apk for HTC One S.
Click to expand...
Click to collapse
thx good working on htc one s:laugh::laugh::laugh:
Somebody can help me?
in your IGO/captures folder create an empty text document - .nomedia ( do not forget to put the dot) ,and try again
genera1 said:
in your IGO/captures folder create an empty text document - .nomedia ( do not forget to put the dot) ,and try again
Click to expand...
Click to collapse
I can't find any "capture" folder in my iGO. I have only, content, debug, license, save,ui_android, ux, branding.zip, data.zip and sys.txt.
if nothing helps, install older version of igo. im using igo 8.4.3 on my one s and it works like a charm :good:
genera1 said:
uninstal your IGO app. then install IGOprimo_v9.6 235664_thin-v1.0.apk and replace branding.zip and sys.txt with these...
Click to expand...
Click to collapse
Thank you very much. It is working.
i use iGO My way 480 x 800 on my htc One S but i had to remove the 3 dot menu button at the bottom of the screen in order to work. Go to Settings>Display, Gestures, & Buttons>Recent Apps Button and choose the third option. The option though is only available in android 4.0.4
Cu placere seby! you welcome.
When I start the app it keeps on telling me "incomplete folder /data/data/com.navngo.igo.javaclient/license and then closes. what am i doing wrond? i installed the apk and copied the igo folder to sdcard root as installation instructions told me to
blejach said:
Thanks very much! Works Great!
It it working best with following setting (just uncomment this line and comment out the previous oue, the setting is present in sys.txt):
screen_xy="800_480:860x540/540x860"
Click to expand...
Click to collapse
You welcome (btw you can press the thanks button ). Yes, if you want to use the line with screen_xy="800_480:860x540/540x860 the top bar will be available; otherwise, if you want to dissapear the top bar leave it as it is.
I'm getting this message on the beginning: "Unsupported voice", any idea how to fix?
Also i notice that a small part of the screen on the bottom is cut... can this be fixed?
Thanks
rvrosa said:
I'm getting this message on the beginning: "Unsupported voice", any idea how to fix?
Also i notice that a small part of the screen on the bottom is cut... can this be fixed?
Thanks
Click to expand...
Click to collapse
Hi, yes it can be fixed the voice issue. First of all, have you used my kit? Or another? Second, what voice do you want to use?
About the small part of the screen, after 1st start won't appear that anymore. If it still does probably you're not using my kit, or, you can change the sys.txt values.
overflyer said:
When I start the app it keeps on telling me "incomplete folder /data/data/com.navngo.igo.javaclient/license and then closes. what am i doing wrond? i installed the apk and copied the igo folder to sdcard root as installation instructions told me to
Click to expand...
Click to collapse
Have you used my kit? if not, means that you are using another version which doesn't allow you to modify some contents. Or, you can take from my kit the license folder and add it to your's (if you have root access - if you don't, use my kit, it will work).
L.E. Btw, now it contains the latest version of Romania map!
ady_uaic said:
Hi, yes it can be fixed the voice issue. First of all, have you used my kit? Or another? Second, what voice do you want to use?
About the small part of the screen, after 1st start won't appear that anymore. If it still does probably you're not using my kit, or, you can change the sys.txt values.
Have you used my kit? if not, means that you are using another version which doesn't allow you to modify some contents. Or, you can take from my kit the license folder and add it to your's (if you have root access - if you don't, use my kit, it will work).
L.E. Btw, now it contains the latest version of Romania map!
Click to expand...
Click to collapse
Hi,
I'm not using your kit... yet, since i'm getting it right now
I want to use European Portuguese.
To use with your kit, can you point me to some Portuguese and Spanish maps?
Thanks
If u don't mind... try putting the Sygic aura GPS. Software... its amazing n simple.. n has lots of tweaks.... moreover.. it works like a charm in One S...:beer:
Hit thanks if ive helped u..!
Sent from my One S using xda app-developers app
Worked for me only for 5 minutes
ady_uaic said:
if someone wants to use igo primo on HTC One S, you can download the functional kit 100% from here
passw: adyc
contains only maps/poi/buildings for Romania
Click to expand...
Click to collapse
What you posted here worked for me like 5 minutes. After that I get the message "Please insert igo primo SD card" no amount of reinstalls is helping to resolve this. The problem started when I tried to add maps for another country, different voices and speedcams but later I deleted the whole package and restored from your original one - still the same error. Even deleted device.nng as suggested in another guide. Thanks in advance.
rvrosa said:
Hi,
I'm not using your kit... yet, since i'm getting it right now
I want to use European Portuguese.
To use with your kit, can you point me to some Portuguese and Spanish maps?
Thanks
Click to expand...
Click to collapse
Hi, yes, I will upload them after 6 pm (I'm at work right now) and give you here the link (so you need portughese language/voice and portugal, spain maps?)
JFreeman366 said:
What you posted here worked for me like 5 minutes. After that I get the message "Please insert igo primo SD card" no amount of reinstalls is helping to resolve this. The problem started when I tried to add maps for another country, different voices and speedcams but later I deleted the whole package and restored from your original one - still the same error. Even deleted device.nng as suggested in another guide. Thanks in advance.
Click to expand...
Click to collapse
Mate, the kit doesn't have any problem . You've messed up something over there.
- First of all, you are trying to use igo with sdcard mounted on PC? (Igo search the sdcard, and if it's mounted it won't work)
- Please be SURE that igo folder is on the root of sdcard memory and not duplicated (igo/igo/content - it should be only igo/content)
- Please be SURE that you didn't changed the sys.txt file; if you did, please send me what you've modified to see what's happenin';
- the maps, speedcams, and so on has nothing to do with the contents; that error appears because igo search the igo/content folder and cannot find it (the path that it's looking for is: sdcard/igo/content and you probably have sdcard/igo/igo/content)
ady_uaic said:
Hi, yes, I will upload them after 6 pm (I'm at work right now) and give you here the link (so you need portughese language/voice and portugal, spain maps?)
Mate, the kit doesn't have any problem . You've messed up something over there.
- First of all, you are trying to use igo with sdcard mounted on PC? (Igo search the sdcard, and if it's mounted it won't work)
- Please be SURE that igo folder is on the root of sdcard memory and not duplicated (igo/igo/content - it should be only igo/content)
- Please be SURE that you didn't changed the sys.txt file; if you did, please send me what you've modified to see what's happenin';
- the maps, speedcams, and so on has nothing to do with the contents; that error appears because igo search the igo/content folder and cannot find it (the path that it's looking for is: sdcard/igo/content and you probably have sdcard/igo/igo/content)
Click to expand...
Click to collapse
Thanks for the fast reply. The folder is not nested /IGO/IGO but is with different name than just IGO. I'll try the rename in the evening when I have the phone and see if it works.
Related
I've searched and searched to find a post that tells me straight to the point how to upgrade my MDA but I just can't find one.
I've got the XDA Developers FTP loaded up in FlashFXP but there seems to be a lot of empty folders on it.
Can someone please tell me if there is a guide on here of exactly what I need to do to upgrade the unit? I followed some advice to fix my Bluetooth problems on here and now my whole MDA has stopped functioning properly... the Today screen just shows all strange graphics etc but I still have the upper and lower menus.
If there is no guide, can someone please tell me what I need to do... my business relies on my MDA! :roll:
ewg_uk said:
I've got the XDA Developers FTP loaded up in FlashFXP but there seems to be a lot of empty folders on it.
Click to expand...
Click to collapse
Well, there seems to be a very very very very very funny guy of girl who has deleted most of de maps of de the Magician. Again, very very funny, we're all lauging very loud. (or is it a manifacturer??? QTEK?, iMate? T-Mobile? Who's the bad guy?
ewg_uk said:
the Today screen just shows all strange graphics etc but I still have the upper and lower menus.
Click to expand...
Click to collapse
Maybe there is a solution: someone else had the same problem (I think, he also had a corrupted Today screen), but after he chose a different picture in the today screen the problem is solved.
Not good about the files Whoever it is has just cost me an awful lot of money so I hope they feel great!
Screen issue is now solved thnks to the picture thing but my Bluetooth will not function at all now... was asking for me to turn flight mode off when it wasn't even on and now it doesn't work full stop.
ok this a small guide i made for a friend..... i'll post it here
ok first thing to do is get the ROM file.
second... after you download the file... extract the zip into any
place you want you will end up with an .exe file... right click on the
exe file and choose extract ( not you need winrar to do that) and
after you extract you will find a bunch of files one of them is named
ROMUpgradeUt.exe or (MaUpgradeUT.exe) replace this file with this one
http://forum.xda-developers.com/download.php?id=4022
after you replace the above file, double click on it and it will start
upgrading ... the device will go into bootloader mode (black screen
with Serial 1 written in it) you will get the country error ID
((((DON'T PANIC)))) and DON'T REMOVE THE DEVICE FROM THE USB OR REST
THE DEVICE, just click Exit to finish. while the deice in the bootloader
mode click on the replaced file and run it again the upgrade process
should go fine................
i will try later to do the guide in a pdf format with pix and more detialed
Okay guys I'm new here too Since I want to get rid of the pink t-mobile stuff and upgrading to a ROM which provides me better camera quality I would like to try a newer ROM version.
But where to get the newest ROM from ftp://ftp.xda-developers.com/Magician/ ? I see extened ROM's but I have been told an extended ROM is a kind of addition to a normal ROM. But where can I find the basic ROM. I've been told that O2 and Qtek roms are the best.
Hi,
Originally posted in the Universal forum, but no response. So am trying here in case anyone has had any similar issues.
After installing and then removing SMAATO news reader I have lost my windows mobile 2nd boot screen.
I know its called welcomehead.192.png and is located in Windows
The file is still there in ROM and I have also copied it across into Windows again (solution offered by searching through other threads). However when I soft reset after the Orange screen, all i get is a white screen.
Can anyone let me know how to restore, I believe other users have had issues with pss reader too.
Thanks in advance. (My device is the M5000)
Matt
Having the same "problem" from the same cause for the last 2 months.....got used to it though, since it does not affect functionality....
white screen
Sorry can't help but I have exactly the same problem due to the same cause on Prophet (SPV M600) so any help would be greatly appreciated.
Have contacted SMAATO, so will let you know.
Other users have had same issue with PRSS Reader and for them, when they uninstalled the reader, their splash screen came back.
Matt
white screen
cheers - look forward to hearing. Wonder if it's coincidence that we're both uk orange? You'd think there would be a reg tweakt hat would point to the second screen to load.
SMAATO replied and said they are looking into it!!
I read from some people that installing PRSS Reader also causes this issue - but that uninstalling restores the boot screen. I tried this but it didnt restore my screen.....and the uninstaller didnt remove the PRSS app completely - resulting in more searching on the web to find out all of the files/reg keys to get rid of.
I do wonder to myself why I installed SMAATO/PRSS in the first place!!
Matt
Thanks for getting back - no doubt it will be hard reset which I dread!
Have you tried that? or doesn't even that help.
If there's any chance of you listing the files/reg entries to delete I'd appreciate that as I had same problem & simply searched ppc for anything with somaato in it, so I'm sure I've still lots of cr*p left on it.
cheers
Hard resetting does restore the boot screen, however restoring a backup will give you the same behaviour - unless that backup is from before SMAATO deinstallation
travis said:
Thanks for getting back - no doubt it will be hard reset which I dread!
Have you tried that? or doesn't even that help.
If there's any chance of you listing the files/reg entries to delete I'd appreciate that as I had same problem & simply searched ppc for anything with somaato in it, so I'm sure I've still lots of cr*p left on it.
cheers
Click to expand...
Click to collapse
Hi,
In your post you mentioned about manual uninstall. I dont know about SMAATO that uninstalled OK, but for PRSSReader - to perform a manual uninstall:
1. Disable today plugin, if it is active
2. Delete registry keys:
HKCU\Software\DaProfik\pRSSreader
HKLM\Services\pRSSreader
HKLM\SOFTWARE\Microsoft\Today\Items\pRSSreader
HKLM\SOFTWARE\Apps\David Andrs pRSSreader
3. reboot the device
4. delete files:
\windows\AppMgr\David Andrs pRSSreader.dll
\windows\David Andrs pRSSreader.unload
\windows\zlib1.dll
\windows\libexpat.dll
\windows\prssrtoday.dll
\windows\prssrenc.dll
\windows\prssrsrv.dll
<installation path>\pRSSreader
Hope this helps.
Matt
Since I got some ActiveSync-problems, I tried cleaning out my device and finally found the cause of the white boot screen:
Older versions of pRSSreader install a zlib.dll to \Windows\ overwriting the built-in one. Now I just renamed that to zlib1.dll (couldn't delete, because it was in use) and on my next reboot: voilà - there was the 2nd boot screen again!!
Newer versions of pRSSreader install the file as zlib1.dll.
Cheers,
-mARKUS
sorted
Nice one mbirth you're a star - worked no problem!
Just curious - Do you know what zlib is? and is it safe to delete it now it's renamed and soft reset?
Thanks once again
P.S. I now have zlib.dll; zlib1.dll; AND zlibce.dll !
travis said:
Nice one mbirth you're a star - worked no problem!
Just curious - Do you know what zlib is? and is it safe to delete it now it's renamed and soft reset?
Thanks once again
P.S. I now have zlib.dll; zlib1.dll; AND zlibce.dll !
Click to expand...
Click to collapse
I can also confirm that it works brilliantly!!
With regards to getting rid of the old file - I renamed zlib.dll to zlib1.dll. After my device booted correctly I moved the zlib1.dll to my storage card and all is still ok. If you have something like total commander, after showing ROM files the zlib file is listed in the windows directory. If you hide them - then you shouldnt see any zlib.dll files - unless another application has installed them, but a clean device will only have the zlib.dll in ROM
Hope this helps.
Matt
matt1971 said:
I can also confirm that it works brilliantly!!
With regards to getting rid of the old file - I renamed zlib.dll to zlib1.dll. After my device booted correctly I moved the zlib1.dll to my storage card and all is still ok. If you have something like total commander, after showing ROM files the zlib file is listed in the windows directory. If you hide them - then you shouldnt see any zlib.dll files - unless another application has installed them, but a clean device will only have the zlib.dll in ROM
Hope this helps.
Matt
Click to expand...
Click to collapse
cheers - have total commander and used it
appreciated
travis said:
Just curious - Do you know what zlib is? and is it safe to delete it now it's renamed and soft reset?
Click to expand...
Click to collapse
zlib = gzip-compression-library. See Wikipedia. I guess the deflate-algorithm used for PNG files was faulty or missing in the pRSS-version of zlib. With deleting that file, you have the original built-in version back active.
If you already have the newer version of pRSSreader, you might want to rename the file to something different than zlib1.dll since pRSSreader 1.3 already installs a zlib1.dll.
After a soft-reset, you can safely delete the renamed file.
Cheers,
-mARKUS
A heads up for you guys, since you would probably like this functionality for your Vox's.
http://forum.xda-developers.com/showthread.php?t=391147
Awesome. I have been looking for this. Thanks!
is this working on the Vox? I don't get it installed due to "not enough system permissions"
best Achilleus
achilleus said:
is this working on the Vox? I don't get it installed due to "not enough system permissions"
best Achilleus
Click to expand...
Click to collapse
me too, dr. gonzo 6.1 rom installed
achilleus said:
is this working on the Vox? I don't get it installed due to "not enough system permissions"
best Achilleus
Click to expand...
Click to collapse
Same situation here...
Hmm... You guys tried unlocking your phone with the "SDA Unlocker" app floating around ? That should do the trick.
OrganicM said:
Hmm... You guys tried unlocking your phone with the "SDA Unlocker" app floating around ? That should do the trick.
Click to expand...
Click to collapse
Been there, done that...I also used the Security Configuration Manager from Microsoft to disable security to check if it would solve this issue but nothing happened :S
OrganicM said:
Hmm... You guys tried unlocking your phone with the "SDA Unlocker" app floating around ? That should do the trick.
Click to expand...
Click to collapse
I did it also, but nothing happened
it may interest all you vox owners (like myself), that I have looked thru the coding of that cab and have been coding all the nessesary bits for it to work on our phones. I'm still working on the cpr file (the one that positions everything), and then I will cab it all up. im still trying to contact the developer to see if he knows whys its not installing thou (and to make sure its okay to poke around in his file!)
EDIT>>
I've just noticed the developer has changed his use of the TestUIPlugin slide for the use of the welcome screen slide, due to reliability and positioning, BUT I personally use the welcome slide for shortcuts, and have had no issues with the testuiplugin slide, plus I notice the welcome screen cannot refresh like the testui one can, so i'm sticking with it. If anyone is interested in my cpr file, or others, I can post them.
Kos letme know when your cab is ready...
thank you
So.. is it possible to install the weather plugin on the Vox? Please post the cpr file or whatever is needed to install it.
If you go the original thread in the Excalibur forum, you can download the cab there and install it on your Vox. It uses the WelcomeCenter plugin which is already properly formatted for the Vox as well. Go download it and try it
I tried every version posted in the Excalibur thread and it doesn't install. It says i don't have sufficient permissions. Rebooted, tried again and still nothing...
EDIT: Found the original version and it still does not install...
phrozen said:
I tried every version posted in the Excalibur thread and it doesn't install. It says i don't have sufficient permissions. Rebooted, tried again and still nothing...
EDIT: Found the original version and it still does not install...
Click to expand...
Click to collapse
The solution I found to make it work is to install everything manually including the creation of the registry keys... :| :S ....but it works now ;P
Well, now I have an issue: everytime the weather updates, my start menu dies...it just stops working...
You guys should try unlocking your device with the SDA Unlocker app that's floating around. That will most definitely do the trick.
OrganicM said:
You guys should try unlocking your device with the SDA Unlocker app that's floating around. That will most definitely do the trick.
Click to expand...
Click to collapse
I already said that didn't work as the other user also said...I had to install everything contained in your cab files manually to make it work...
My bad.. didn't see that part. Well how does it look in portrait mode ? Is it messed up ?
OrganicM said:
My bad.. didn't see that part. Well how does it look in portrait mode ? Is it messed up ?
Click to expand...
Click to collapse
I did, but problems wasn't solved
OrganicM said:
My bad.. didn't see that part. Well how does it look in portrait mode ? Is it messed up ?
Click to expand...
Click to collapse
until now everything looks good even in portrait mode...the only issue that sometimes happens is that when I update the weather, sometimes the start menu stops working...I click in the start menu and nothing happens...I have to reboot to make it work again...
I was wondering if anyone knew of such a thing (a download to enable camera flash even at low battery) or would be kind enough to provide me with one, I would be so grateful. I've tried searching around to no avail. Thanks in advance.
*Actually, or if anyone knows where in the settings I can change this at because I've went through everything I see and I can't find an option for it.
I need it too....
Last time i checked, this was in
HKEY_LOCAL_MACHINE\\Drivers\BuiltIn\Battery\
Change the 0 value to "FlashlightpowerUnavailable" : 1
Cheers
There is a better solution:
[APP] Camera w/o low batt. flashlight restrictions - xda-developers
Hi there djet,
i tried to transfer both the files to the windows folder but i am getting this message: "be certain that there is enough free storage memory, that the destination is not write protected and that the file is not currently in use". Have you personally tried the method already?
many thanks
cezzarmicu said:
Hi there djet,
i tried to transfer both the files to the windows folder but i am getting this message: "be certain that there is enough free storage memory, that the destination is not write protected and that the file is not currently in use". Have you personally tried the method already?
many thanks
Click to expand...
Click to collapse
All you need to do is to copy Camera.exe to \Windows folder. You are definitely doing it wrong. Try Resco's Explorer for file management.
Have you personally tried the method already?
Click to expand...
Click to collapse
Personally? The patch and the package are mine. Of course it works.
Thanks djet...worked this time (using resco's explorer).
i tried using the native file explorer yesterday which didn't work
EDIT++++
i tried the camera app and it didn't work. says that app may be right protected... i returned the original camera app and i got it to work. do i still have to do something on the replacement camera app before placing it to the windows folder?
thanks
cezzarmicu said:
Thanks djet...worked this time (using resco's explorer).
i tried using the native file explorer yesterday which didn't work
EDIT++++
i tried the camera app and it didn't work. says that app may be right protected... i returned the original camera app and i got it to work. do i still have to do something on the replacement camera app before placing it to the windows folder?
thanks
Click to expand...
Click to collapse
What ROM are you using and what exactly is the message?
I am using the old ROM (1.48.707.2) WWE. I'm from the Philippines btw.
I'm sorry I forgot the exact message but it did say something like either the phone having not enough memory space (but I still have 78MBfree space) or installing a right-protected (certificate) file?
cezzarmicu said:
I am using the old ROM (1.48.707.2) WWE. I'm from the Philippines btw.
I'm sorry I forgot the exact message but it did say something like either the phone having not enough memory space (but I still have 78MBfree space) or installing a right-protected (certificate) file?
Click to expand...
Click to collapse
The patch is intended for 1.66+ Camera. Certificate checks must be disabled as the patched exe isn't properly signed.
i see. now i am going to have to be forced to upgrade my rom thanks
Android on HTC cruise How to?
Hi all,
I'm REALLY confused or misinfomed or whatever on how to run andoid from my sd card.
I tried some things from a website androidonhtc but only got up to a point.
Is there a simple how-to on how to run android on cruise and some links on where to donwload the appropriate files?
For example i have got the haret but i can't find anywhere to download androidinstaller.tar
Am I close or far from my goal?
I know i might ask a silly question but guys i'm really confused.
Thanks anyway in advance.
as for how-to in hxxp://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall
after getting haretinstall.zip, you need a current kernel (zImage) from
- dzo = hxxp://it029000.massey.ac.nz/vogue/files/?C=M;O=D
or
- sourceforge = hxxp://sourceforge.net/projects/androidhtc/files/
------------------------
as for androidinstall.tar / .tgz you can get from
- vogue forum = hxxp://forum.xda-developers.com/forumdisplay.php?f=588
- kaiser forum = hxxp://forum.xda-developers.com/forumdisplay.php?f=602
- sourceforge = hxxp://sourceforge.net/projects/androidhtc/files/
PS: sorry for the hxxp link, I have no permission to post any link yet
Thank you very very very much for your help!
Congratulations mensa07. Although I already knew all this stuff from your link, it took me some time to figure them out because I did not know there was such a good guide for starters. Very usefull link. Thank you
Hi..
I reading many of threads..
But i still dunno how to make it works on my POLA100..
can any1 show me some guides??
tq..
yes please post a guide for dual booting ...i do not want to flash if not necesary ...
preeety plz
please check this thread for guide on running android on pola100
oh come on ..a couple of links with no explanation ...no nothing ...
its garbage !!! - we have to pick up pieces fom 10 or 12 threads to make this work?and the english is "lakky",,,
please post A GUIDE .... not o joke.
rocket1982 said:
oh come on ..a couple of links with no explanation ...no nothing ...
its garbage !!! - we have to pick up pieces fom 10 or 12 threads to make this work?and the english is "lakky",,,
please post A GUIDE .... not o joke.
Click to expand...
Click to collapse
well, it's no garbage, just required more explanation. let me try to make it simpler. this guide will use zImage-eclair and vaniljeclair, change it to suit your taste accordingly
- get haretinstall.zip from here
extract this file and get default-polaris.txt (rename as default.txt), zImage-eclair (rename as zImage), initrd.gz and haret.exe. put all these files into andboot folder in root of your sdcard. your sdcard will look like this:
/andboot/default.txt
/andboot/zImage
/andboot/initrd.gz
/andboot/haret.exe
- next you need to download vaniljeclair from here
extract the file and you will get androidinstall.tar, put this file along with those files on /andboot/
you should have those 5 files or you cannot boot android.
- select haret.exe to execute, press run, pay attention to the text rolling, when it asks you to hold button, hold volume button up, and you will be given installer menu. choose install and delete data. let the format and installer finish, then you will be given menu again. do not quit, just reset, and restart from haret (you will see that you have data.img, system.img and some other files). at this time let the installer do not interrupt, it took more than 5 minutes before android logo asks you to touch screen
- if there is problem during booting, post it here, let people here try to solve
HTH
i want to ask..izzit it will wide out my windows mobile system??
scotty89 said:
i want to ask..izzit it will wide out my windows mobile system??
Click to expand...
Click to collapse
no, if you start android from haret.exe, it will not erase anything.
even data in the sd card??
scotty89 said:
even data in the sd card??
Click to expand...
Click to collapse
it will not erase your sd card either, however you might want to backup your data first just in case something does not go well.
thx for ur help..
i get to boot in the android..
try to use it..
is the bluetooth and wireless fix>??
and can the contact to be sync??
scotty89 said:
thx for ur help..
i get to boot in the android..
try to use it..
is the bluetooth and wireless fix>??
and can the contact to be sync??
Click to expand...
Click to collapse
BT and WIFI should work, there is vaniljeclair thread on this problem if something is not working.
as for contact I think you need google account to sync.
Hi,
Thank you for the guide. I actually follow it and encountered an error. When it asked for volume up or d-pad center, I did, then it prompted that it was waiting for something several times. So I soft-reset the phone and launch it again.
Then, after haret.exe is booting linux, I have got a strange screen with scramble text.
How can I put everything back in the previous state to reinstall it propely?
Thank you
More info....
Did you get to the install screen after pressing centerdpad?
If yes, did it install?
What was it waiting for? The error message can give a clue what is wrong.
i manage to get to ask to hold up the center d-pad then get into a installer menu..
currently i just cant get my wifi and bt work..
haven get connection to sign in to google account..
I have all five file on my SD card but when I click on haret on my Sd and hit run where it say defaukt.txt..I get a error saying " cannot open script file \storage card\andboot\default.txt" is im doing something wrong..thx
u got change the polaris default-polaris to default??