My WiFi hot spot is not working with windows 7 or ubuntu 12.04 after flashing viper s 1.1.0 the pc shuts down and shows a blue screen with memory dump eror message. Tried doing full wipe thrice and installing the Rom again from the scratch but problem persists any one can help plz. HTC sensation h boot 1.27 firmware 3.33 s-on device unlocked viper s 1.1.0 Rom full wipe done.
Sent from my HTC Sensation Z710e using xda premium
binuraj82 said:
My WiFi hot spot is not working with windows 7 or ubuntu 12.04 after flashing viper s 1.1.0 the pc shuts down and shows a blue screen with memory dump eror message. Tried doing full wipe thrice and installing the Rom again from the scratch but problem persists any one can help plz. HTC sensation h boot 1.27 firmware 3.33 s-on device unlocked viper s 1.1.0 Rom full wipe done.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Since it's the PC which shuts down with blue screen, I would guess it's a problem with either Wi-fi hardware in PC, or the Wi-fi drivers in PC. Since the same issue happens with both windows & ubuntu, it might point to the hardware. Have you been able to connect to any other wi-fi network using this PC?
jyo1 said:
Since it's the PC which shuts down with blue screen, I would guess it's a problem with either Wi-fi hardware in PC, or the Wi-fi drivers in PC. Since the same issue happens with both windows & ubuntu, it might point to the hardware. Have you been able to connect to any other wi-fi network using this PC?
Click to expand...
Click to collapse
But if its the hardware then how is it working fine when i use ARHD. With ARHD everything runs fine. Is there a workaround cause i like ViperS a lot .
Regards
Why don't you ask in ViperS forum! Unless you don't have access to post in development forums
Sent from my Sense(ation) using XDA Premium
I'll try there thanx for your help.
Sent from my HTC Sensation Z710e using xda premium
Related
Hi all,
I have been running Darkstone SuperNand Froyo 1.5 for a while now and I have been looking for a new ROM.. When I find one I like, I can't get my Win Vista to recognize phone nor the phone to recognize usb. So now I am stuck and in need of help.. Tried to see if phone would recognize usb while in bootloader with no luck there either..
How can I fix this?
I think if you d/l clk it comes with drivers, manually add the drivers through win vista device manager that should do it its just because vista is tosh.......
Sent from my HTC HD2
=j4n87;15846555]Mhh, didnt remember if i required a driver to getbtge mass storage working...
Off topic: vista is after windows me the worst os ever
Google usb drivers are in this package...ignore adb, fastboot.exe..just picked up the package from the clk thread. Im on my way to work, so this was the best solution to help as fast as possible
http://www.multiupload.com/9R0KMRJ5X0
You have to manually install them over the device manager.
Hope this helps.
Sent from my HTC HD2 using XDA Premium App[/QUOTE]
Sent from my HTC HD2
Sent from my HTC HD2
Thanks for the help. Will try it out once I get home.
Sent from my HTC Desire using XDA App
no luck
still no luck.. keep getting error message Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712) and 321
Are you running it as admin?
Sent from my HTC HD2
Yes
Sent from my HTC Desire using XDA App
When your phone is plugged in and you go to device manager in windows what do you see? Is there any missing drivers?
Sent from my HTC HD2 using XDA App
Try to reinstall PC suit
Your using an old Rom, have you installed magldr?
Sent from my HTC HD2 using XDA App
yes
I have v1.13.... When I plug the phone in all the drivers show up to date.. I am convinced my phone is the devil..
JeighHD2 said:
still no luck.. keep getting error message Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712) and 321
Click to expand...
Click to collapse
i had the same problem on my cuzins computer.
(some old computer os had the drivers in the standard systemfiles for activesync, newer os dont standard have activesync/wmdc drivers)
install windows mobile device center 6.1.
you will not (never) use it but it wil have the drivers you need.
it will work.
So you've gone into the tri colour screen? (vol down and power) with the usb plugged into your phone and pc. At the bottom it should say usb and at the top your spl version.
What happens on your device?
Sent from my HTC HD2 using XDA Premium App
whynot66 said:
So you've gone into the tri colour screen? (vol down and power) with the usb plugged into your phone and pc. At the bottom it should say usb and at the top your spl version.
What happens on your device?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
i dont have the hd2 with me (using a DZ now for a while), but if you have magdlr, go to usb flashermode, or go to tri colour.
or use/and a ruu.
i have hspl 2.08/hspl3 on the phone and magdlr 1.13.
just recently tried the new wp7 and the reverted back to nand android.
thats when i had the same problem.
I get the tri color screen it says usb at the bottom but does not connect my HSPL is 2.08.. I can't even get task29 to run.. I also have windows mobile device center on my laptop as well as htc sync... neither one of them recognize the phone.
JeighHD2 said:
I get the tri color screen it says usb at the bottom but does not connect my HSPL is 2.08.. I can't even get task29 to run.. I also have windows mobile device center on my laptop as well as htc sync... neither one of them recognize the phone.
Click to expand...
Click to collapse
usb port on the comp/phone is working oke?
is the cable any good?
the phone is useles in tricolourmode, exept for flashing a ruu
sometimes the ruu will error the first time, just try it again.
if you want to flash,
use magdlr (hold the most left button pressed when powering on the phone), go to usb flasher, then use the ruu for partitioning/task 29 whatever.
and then use clockwork to flash the rom
i only use tricolour if i want to go back to wm6.5 (or when i want to get rid of magdlr).
for evrything else i use:
magdlr flasher mode---> for partitioning nand
clockwork---> for roms
when i go into usb flasher I get the same messages when trying to run the ruu or task29. I will try it again when I get home in about 45 min and will update
JeighHD2 said:
when i go into usb flasher I get the same messages when trying to run the ruu or task29. I will try it again when I get home in about 45 min and will update
Click to expand...
Click to collapse
(when the ruu is giving a error, imediatly try again)
you can also try this.
flash a custom wm6.5 from tricolour. (hspl wil remain on the phone)
then go trough the whole proces of flashing a nand android rom as it was for the first time.
(task 29/magdlr/clockwork/custom rom)
now its sleeping time.
RUU ran and stock 6.5 WinMo back on device.. .Will keep you guys updated on the progress... Thanks for all of the help
you must to use Android 2.3.4
Hi all,
Cmd hanged at "method 3"
Hboot version 1.17.0011
Asia WWE - Singapore
Windows 7
Any others out there having the same experience as me?
P.S: uninstalled hTC sync, activated htc sync on device, installed latest htc drivers/naked drivers..
Sent from my hTC Z710e Washing Machine using XDA Premium App
I was having a similar problem. Do you perhaps have Droid Explorer installed on your pc, or some similar app that auto connects via usb to your device. If so, uninstall. I was able to run the tool after uninstalling - just used the Charge usb connection (not HTC Sync) and ran the tool as Administrator. All worked fine for me.
Well, I had this issue as well.
So I uninstalled all HTC Sync, HTC Drivers and HTC bmp Drivers, and reinstalled the driver provided by Revolutionnary. Then I plugged it my phone with USB debugging on, set it to charge, and launched revolutionnary again as an admin. That's when it worked !
ClydeB1 said:
I was having a similar problem. Do you perhaps have Droid Explorer installed on your pc, or some similar app that auto connects via usb to your device. If so, uninstall. I was able to run the tool after uninstalling - just used the Charge usb connection (not HTC Sync) and ran the tool as Administrator. All worked fine for me.
Click to expand...
Click to collapse
Holy piece of poop! I juz rem i had droid explorer installed!
Damm!! Thanks for the reminder mate... But i m currently outside... Gonna try when i go home which is tomorrow... Will update you guys again...
Sent from my hTC Z710e Washing Machine using XDA Premium App
I have a very annoying problem. when I'm trying to connect the phone to my laptop it wont open or show the window to choose what to do. I can't see my SD or tethering. it's only charge my phone.
I tried to change the settings, nothing...
Please help.
My phone is rooted S-OFF.
eyalbrik said:
I have a very annoying problem. when I'm trying to connect the phone to my laptop it wont open or show the window to choose what to do. I can't see my SD or tethering. it's only charge my phone.
I tried to change the settings, nothing...
Please help.
My phone is rooted S-OFF.
Click to expand...
Click to collapse
Hi,
If you have HTC Sync, uninstall it and then install the latest version.
If you don't have HTC sync,then install it.
Problem
malybru said:
Hi,
If you have HTC Sync, uninstall it and then install the latest version.
If you don't have HTC sync,then install it.
Click to expand...
Click to collapse
HI there,
I have this problem to.
But when I install htc sync the htc synch doesnt sees my telephone.
My telephone is not rooted, not yet...
any other ideas?
hope to hear from anyone soon
xtroardinary said:
HI there,
I have this problem to.
But when I install htc sync the htc synch doesnt sees my telephone.
My telephone is not rooted, not yet...
any other ideas?
hope to hear from anyone soon
Click to expand...
Click to collapse
enable usb debugging mode from settings
are you using stock rom ? what version of windows (im assuming your using windows) are you using ? open device manager, and see if there are any changes while connecting phone to usb
Have you overwritten for your phone by CM? Or do you use the clean stock software?
HTC sync uses Sence only. So any other software causes to sync absence. The choice to switch on for external drive is performed from system screen (swipe down the highest screen row with notification icons) to tap on USB connection.
When you would like to sync for data with PC you can use for MyPhoneExplorer program (client for phone and PC together).
eyalbrik said:
I have a very annoying problem. when I'm trying to connect the phone to my laptop it wont open or show the window to choose what to do. I can't see my SD or tethering. it's only charge my phone.
I tried to change the settings, nothing...
Please help.
My phone is rooted S-OFF.
Click to expand...
Click to collapse
enable usb debugging mode from settings may be work
I have a Sensation xe with bootloader unlocked but it can't connect to HTC sync on my pc, I've tried HTC sync as default connection choice when I connect to pc downloaded HTC drivers and still it's not connecting [emoji17]
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
gemer45a said:
I have a Sensation xe with bootloader unlocked but it can't connect to HTC sync on my pc, I've tried HTC sync as default connection choice when I connect to pc downloaded HTC drivers and still it's not connecting [emoji17]
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
Click to expand...
Click to collapse
enable usb debugging mode from settings
also what os do you have in your pc?
gemer45a said:
I have a Sensation xe with bootloader unlocked but it can't connect to HTC sync on my pc, I've tried HTC sync as default connection choice when I connect to pc downloaded HTC drivers and still it's not connecting [emoji17]
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
Click to expand...
Click to collapse
I have USB debugging enabled but it's still not connecting. My system is running on window 7 32 bit
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Can you verify that the drivers aren't the issue? If you don't know how:
-Right click on My Computer
-Click Properties
-In the upper left corner i think should be Device Manager option
-Check is your HTC recognized or not ( is your device listed in Device manager )
if it is and you still have issues then it's not the driver related,
else you will notice a device connected with a yellow triangle with black exclamation point
This is in my experience most likely the problem, if it isn't driver related it's probably something exotic and highly specific in which case i'm unable to help you
gemer45a said:
I have USB debugging enabled but it's still not connecting. My system is running on window 7 32 bit
Sent from my HTC Sensation XE with Beats Audio Z715e using xda app-developers app
Click to expand...
Click to collapse
try drivers from here
http://forum.xda-developers.com/showthread.php?t=2217396
Ajax1337 said:
Can you verify that the drivers aren't the issue? If you don't know how:
-Right click on My Computer
-Click Properties
-In the upper left corner i think should be Device Manager option
-Check is your HTC recognized or not ( is your device listed in Device manager )
if it is and you still have issues then it's not the driver related,
else you will notice a device connected with a yellow triangle with black exclamation point
This is in my experience most likely the problem, if it isn't driver related it's probably something exotic and highly specific in which case i'm unable to help you
Click to expand...
Click to collapse
My device connects to the pc very well but HTC sync cannot detect it. I don't think it's the drivers.
Sent from my HTC Sensation XE with Beats Audio Z715e using Tapatalk
Dear xda devs,
I used to be able to connect my phone normally to my PC (adb, storage mount, etc). But now suddenly when I connect my Sensation to my laptop, it doesn't detect it as a device. It only charges the phone but gives no option of storage mount or debugging.
Any idea which driver might go wrong and where can I obtain the correct one?
check htc drivers or install htcsync.it might help
rzr86 said:
check htc drivers or install htcsync.it might help
Click to expand...
Click to collapse
installed it but still not detected...
update: it worked after I uninstalled HTC Sync and reboot my laptop
flamechamp said:
update: it worked after I uninstalled HTC Sync and reboot my laptop
Click to expand...
Click to collapse
good news mate.very happy for you:good:
After I succesfully flashed Apacha's kernel and flash bootimg using fastboot command in my laptop (usb is working) suddenly today my laptop can't detect my sendation again!
HELP PLS!
Sent from my HTC Sensation Z710e using xda app-developers app
Hello all,
i got a problem with my HTC Sensation XE.
I tried to root the device, following http://forum.xda-developers.com/showthread.php?t=1192300 and http://forum.xda-developers.com/showthread.php?t=1870233
But im unable to complete the htcdev part. When I boot the device into the bootloader and chooce Fastboot, it doesnt connect to my pc. When I try adb devices, it doesnt see it. When I try this when the device is normally booted, it shows using that command.
Is this a corrupt bootloader, and can I fix this?
remi1986 said:
Hello all,
i got a problem with my HTC Sensation XE.
I tried to root the device, following http://forum.xda-developers.com/showthread.php?t=1192300 and http://forum.xda-developers.com/showthread.php?t=1870233
But im unable to complete the htcdev part. When I boot the device into the bootloader and chooce Fastboot, it doesnt connect to my pc. When I try adb devices, it doesnt see it. When I try this when the device is normally booted, it shows using that command.
Is this a corrupt bootloader, and can I fix this?
Click to expand...
Click to collapse
Have you installed htc drivers?
Also use usb 2.0 ports
And in the bootloader screen make sure it shows fastboot usb
Sent from my HTC Sensation using xda premium
rzr86 said:
Have you installed htc drivers?
Also use usb 2.0 ports
And in the bootloader screen make sure it shows fastboot usb
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Indeed, had the wrong drivers. I found a thread with the correct ones and everything is solved now. My device is rooted.
Thanks for your reply
P. S for anyone looking if you have a corrupt bootloader your only option is jtag as your bricked. So make sure you use the correct terminology
Sent from my HTC Sensation 4G using xda app-developers app