This works on the Inspire 4G also
Thanks xda! and OP
http://forum.xda-developers.com/showthread.php?t=961217
Menu - Settings - Wireless & NetworksMobile Networks - Access Point Names - Menu - New APN, Enter these settings:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MMS Protocol: WAP 2.0
MCC:310
MNC:410
Authentication Type: leave blank
APN Type: leave blank
Menu - Save, then select New APN (AT&T) You should see a green dot next to it, and it should be labeled under AT&T as wap.cingular. Go back to home screen and check internet connection is active. Once you verified internet is working, power off phone, then power on. Phone should still have active internet connection, if it does, you are done!
Already thoroughly discussed in the general section.
Sent from Desire HD or Inspire 4G or whatever this thing is called via premium XDA app.
Seems like every time I flash a ROM, my APN settings won't allow me to send/receive MMS. Does anyone have a setting that works?
My following set up (Which is default):
Name: ATT
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: Blank
MMSC: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Blank
APN Type: default,supl,mms
APN Protocol: IPv4
---------------
I am currently using Ninja ROM, and if you have configured the APN settings to have MMS work, please share the settings.
I have searched everywhere and nothing. Even asked in the Ninja thread, and the only response you get is "Oh, mine works...". That's basically a F U. Not helpful responses.
Thanks.
homescrub said:
Seems like every time I flash a ROM, my APN settings won't allow me to send/receive MMS. Does anyone have a setting that works?
My following set up (Which is default):
Name: ATT
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: Blank
MMSC: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Blank
APN Type: default,supl,mms
APN Protocol: IPv4
---------------
I am currently using Ninja ROM, and if you have configured the APN settings to have MMS work, please share the settings.
I have searched everywhere and nothing. Even asked in the Ninja thread, and the only response you get is "Oh, mine works...". That's basically a F U. Not helpful responses.
Thanks.
Click to expand...
Click to collapse
Not sure if you mistyped something, but the MMSC field is not supposed to read: wireless.cingular.com. Make sure it reads: http://mmsc.cingular.com
Also, your Proxy and Port fields should read:
Proxy: wireless.cingular.com
Port: 80
You don't list your MMS proxy field, but it should read: wireless.cingular.com
If the above changes don't fix anything, then let's try breaking out your MMS connection into a separate APN. Use this method (from my APN thread):
Standard warning applies here: as always, before making any major config changes be sure to fully backup your ROM. If you mess up real bad or something goes unexpectedly wrong, then you might permanently lose your connection with no recourse other than a complete restore.
Step 1. Delete all APNs
If you're not already at your APN screen, then from your home screen press Menu button --> Settings --> Wireless and networks --> Mobile networks --> Access Point Names
Press the left side of your 1st APN to go into the settings of this APN, then press Menu>>Delete APN.
Repeat this process for any other APNs you have. The goal is to delete all APNs so we can start from scratch.
Now do the next steps in the same order as below:
Step 2. Create a new APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 1st APN:
Name: MEdia Net
APN: Phone
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: default,admin,hipri (notice there is no space on either side of the commas)
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save. You will now be back at the initial APN screen.
Step 3. Create another APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 2nd APN:
Name: MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: mms,supl (notice there is no space on either side of the comma)
APN protocol: IPv4
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save.
You will now be back at the initial APN screen again. Make sure the 1st APN (named MEdia Net) is selected (via the round radio button on the right side). Your data connection will drop for a few seconds.
We are done at this point. Let me know if this works for you. If not, it is probably a software problem in your ROM somewhere.
I've tried this method you've posted. First of all, thank you.
Now, after setting up both APN's, neither seem to work to get MMS to function. I am not sure why.
I will call AT&T next week.
homescrub said:
I've tried this method you've posted. First of all, thank you.
Now, after setting up both APN's, neither seem to work to get MMS to function. I am not sure why.
I will call AT&T next week.
Click to expand...
Click to collapse
Hmmm, well at least we gave it a shot. The dual APN config should have worked for you, as it's the same as what comes on the stock ROM. I suppose one last thing you could try would be to get your phone back to pure stock and see if MMS works then. This stock RUU is located in this thread. It is an executable file that you run on your PC, and it completely wipes the phone, unroots it and brings it back to factory stock. If that doesn't work, then maybe your account isn't allowing MMS or something. Good luck either way.
I know it would work on stock, and stock rooted. But with any other ROM I flash, MMS won't work.
Again, thanks for your help. Its no deal breaker, just wish it would work.
I had the same problem I had to change the radio/ril back to stock to get it to work
SuicideMyk said:
I had the same problem I had to change the radio/ril back to stock to get it to work
Click to expand...
Click to collapse
I did that too on Ninja. And since I'm running Ninja ROM on mine, it seems its only able to use Single APN's.
I don't know.
Hi Everybody, after struggling with AT&T APN settings and navigating on the forums, found a simple way of fixing the MMS picture problem. Create a new APN config (under a new Name) with the exact info on the APN pta originally found on your phone, use the config below.
APN: pta (same)
MMSC: (same)
MMS proxy: (same)
MMS port: (same)
MCC: (same)
MNC: (same)
This is where I found is wrong from AT&T, their APN doesn't specify the MMS option, change it to:
APN type: internet + mms + supl (different, the original version is internet)
After that, my MMS start working with pictures.
I hope is useful info to others.
Regards,
Alejandro
Telus Mobility LTE APN Settings are as Follows (if you flashed a rom and cannot get data check your apn settings to see if they correspond)
NAME : TELUS SP
APN : SP.TELUS.COM
PROXY : NOT SET
PORT : NOT SET
USERNAME: NOT SET
PASSWORD : NOT SET
SERVER : NOT SET
MMSC : HTTP://ALIASREDIRECT.NET/PROXY/MMSC
MMS PROXY: 74.49.0.18
MMS PORT: 80
MCC: 302
MNC: 220
AUTHENTICATION TYPE: NONE
APN TYPE : DEFAULT, MMS
APN PROTOCOL : IPV4
ENABLE/DISABLE APN: APN ENABLED (CHECKED)
BEARER: UNSPECIFIED
NAME: TELUS ISP
APN: ISP.TELUS.COM
PROXY NOT SET
PORT NOT SET
USERNAME NOT SET
PASSWORD NTO SET
SERVER NOT SET
MMSC NOT SET
MMS PROXY NOT SET
MMS PORT NOT SET
MCC 302
MNC 220
AUTHENTICATION TYPE NONE
APN TYPE DUN
APN PROTOCOL IPV4
ENABLE/DISABLE APN APN ENABLED (CHECKED)
BEARER UNSPECIFIED
yeahitsgotahemii said:
NAME : TELUS SP
APN : SP.TELUS.COM
.
:
APN TYPE : DEFAULT, MMS, SUPL
Click to expand...
Click to collapse
Don't know if it makes any difference but my stock APN settings include "supl" in the TELUS SP APN Type field.
Case sensitivity also, especially for APN field (should be all lower-case)!
I recently changed carriers and had to update my APN settings. The APN settings requires me to change the MNC to 410 but when I do this and save the APN settings it instantly deletes the entire setting.
Attempting to use this apn setting.
(Edited out links due to new user)
Code:
Name : Straight Talk
APN : tfdata
Proxy : proxy(dot)mvno(dot)tracfone(dot)com
Port: : 80
MMSC : http : // mms-tf(dot)net
MMS Proxy : mms3(dot)tracfone(dot)com
MMS Port : 80
MCC : 310
MNC: 410
APN Type : default,mms,supl
I have tried altering every single other field and it saves just fine until I try to edit the MNC from 260 (or blank when creating a new APN) to 410 and attempt to save.
Using the latest default MIUI updates.
I'm having this same issue currently. Did you ever get this resolved?