Related
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
rr0yy said:
I never had any problem with link2sd and ANY rom. Im on CM 10.1
Till ICS it was easy to directly download and flash roms and Gapps.
But JB roms need trimming.
What i do is.. after a clean wipe I flash any JB rom. Then remove unwanted apps.. Instal Link2sd..
change few minor system apps to user apps (not recommended, if you dont know.. what you are doing).
After linking these apps.. I always have enough mem for Gapps.
In Gapps also you have few apps which you can convert to user app and then link it.
Click to expand...
Click to collapse
My issue is now fixed, but in a hard way. Formatted the secondary SD card partition, and then Link2SD automatically recognized it. All the apps are gone, but at least I got the secondary partition active. Spent another half-hour downloading all the needed apps again from the Play store.
Link2Sd not working for me on CM10.1 Rom
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
adcool2007 said:
I am using TouchWiz JB V2 Rom
I have tried ti install int2Ext+ (CronMod Fixed version fro 4.2.2) Still no luck
Also installed Link2Sd but it gave
Unable to create mout script error
I partiotned my sdcard using recovery (CWM 5.0.2.6) (it created Ext3)
Then (Delected the sdext partition using "Mini Partition Tool Wizard" then created new partition for Ext4)
But still no luck Nothing seems to work
Click to expand...
Click to collapse
Hi
І have also had the problem.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
format ext2 or ext4.
Run Link2sd
Apparently there was no room in the system or chmod / chown
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
rishabhgangwar said:
Can you tell which version of kernel you are using?
If you are on 3.x.x version, sorry to tell you that these scripts are not working till today.
Click to expand...
Click to collapse
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
I also had problems with link2SD.
piavia said:
Hi
Kernel 3.0.8-perf+chocolate [email protected] #1
I have Install [UNOFFICIAL] [ROM] [4.2.2] [29.3.13] Android Open Kang Project (AOKP)|Build #1 - P500
But link2d is not working.
I tried formatting ext2 and ext4, no result was not, error mount script.I knew it or not enough memory or wrong permissions set.
I mentioned that Titanium Backup can delete system apk you need to unmount the partition.
I removed the system software of Google voice search, voice dialing, search . (Titanium Backup / un-install all user & system apps)
Run Link2sd :victory:
Click to expand...
Click to collapse
Thanks a lot man Pavai
u save me ....:victory:
The standard and not-really-necessary idea of doing a factory-reset wipe when flashing is the problem here. I also had that zong my sdext making it read-only and nothing, nothing except re-partitioning the sdcard helped.
not working !
hi ! I have a problem , I've tried to partition sd card with cwm, minitool partition , tried ext 2,ext 3 , ext 4 , flash again ROM , install first link2sd , recreate mount scripts every time i change the method but no matter what i do , it keep telling me that the 2nd partition is not mounted and wont let me recreate mount script . ( Mount script cannot be created ) . If anyone can help me , i'll very much appreciate . Thanks !
LG P500 , CM10.1
Edit : Got it to work with CM7 .
Link 2 sd second partition is removed after installing a new custom ROM , help plz
Hi, Link 2 sd second partition is removed after installing a new custom ROM , (i lost my 2gb) how to fix it ??? how can i get my second partition storage back ? Please help me out
You can open menu on link 2 sd, and in the "more" section, click 2 re-link libraries and re-link files.
Sent from my LG-P500 using xda app-developers app
HELPPP
i used link2sd and i deleted something and all of a sudde the network disappeared after restarting when i go to mobile networks it says THIS OPTION DOES NOT SUPPORT CURRENT ROM... help pls asap.. **** i regret it so much
---------- Post added at 11:32 AM ---------- Previous post was at 11:18 AM ----------
I deleted something probably dialer with LINK2SD and now my mobile network doesnt work when i do to the settings it says THIS OPTION DOES NOT SUPPORT CURRENT ROM.. please help asap..
hashdoom said:
Hi,
First of all, thank you a lot for all the development effort that has been put in to bring the AOKP ROM up to this fantastic standard. I have been using the ICS AOKP for quite a while, and just switched over to the JB ROM. It feels a lot faster and smoother, thank you!
I have got a question on Link2SD after flashing this ROM. Apologies beforehand, if this is not the forum to post that. I had used Link2SD while on ICS to move most of the apps to the SD card. Now after flashing JB, Link2SD does not re-mount the SD card secondary partition. I selected all the options mentioned (ext2/3/4/FAT) but it fails to mount with any of those options. So I'm not able to re-link any of my apps. Does anyone know how to fix this and get my apps back?
I also tried the following as per suggestions in some of the threads: 1) mounting it in recovery: not working; gives the message error mounting sd-ext (2) deleting some of the apps like Downloads and Email: still not working even after deleting those two apps.
Any help will be much appreciated. Thanks in advance!
Click to expand...
Click to collapse
Hi, you can do one of these things, by adb shell run e2fsck -fpDC0 /dev/block/mmcblk0p2 to your second partition or using gparted run a full check of second partition of your SD card in a computer card reader, after that will work. I have the same problem, but in my case i have to do this procedure EVERY DAY because at next start the read only problem starts over... ANY BETTER SOLUTION APRECIATED !!!
After factory reset, I had a read-only ext4 partition. Had to start over.
Common cause of link2sd not creating its mount scripts is too little room on /system. Try adb shell df | grep system. Need a few meg. If this be the problem, need to trim the ROM.
Can,t understand ... How to Do it In Micromax A27...in custom Rom
tell me how to do it in Micromax A27 in custom Rom Dreamboltxv2
A lot of separate issues here and in various threads:
1. Sd-ext read only after factory reset. I never do that. Had that very thing happen. Save all data from partitions to computer, repartition and copy it back.
2. Not enough room on system to process/form mount script. JB and onward, ROMs need trimming. > 3meg needed, 9meg should be plenty.
3. No room on data. Link2sd can still work and fix that. If sdext can be mounted, that is ... and a launcher can live long enough to get to lin2sd and start it!
4. Other errors creating the mount script. I am now getting "device busy ... maybe ext4 not supported ... try vfat ... etc." Ext4 is supported. I have a copy of the script which I can place myself.
5. Data integrity problems in Kitkat based ROMs. Repeated recreation of dexes on data, using it up (Link2sd's Achilles heel). Sometimes, recreating that script can stop this. If one can get it re-created. Issues 3, 4. Link2sd can get the space back, problem is keeping it.
I have raised the issues with Link2sd authors.
Hi, I have try to read all information in this beautiful and complex forum. I'm interested to increase my internal memory space and i have try to use Link2sd, but after 2 weeks i have noticed that all memory it is full.
I have put on my smartphone the BALT ROM, but i cannot write under that topic because i don't have sufficient posts.
Someone can help me to reach this point? Pls help me because I have try to repeat all operations 3 times but in all cases i have obtain the same result.
Thx in advance
Ivan Aka KaiserOrn
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
KaiserOrn said:
I have read that Link2SD can have some problem with 4.2.2, it is true ? How can i fix it or exist others software similar to avoid this problem ?
Click to expand...
Click to collapse
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
KaiserOrn said:
I do all your same step, and usually after reboot i have about 70 MB free, but in this last day i have noticed that i have an icon that tell me that my internal memory is full.
My only difference from u is that i use ext3 part and not ext4, but i think it is the same.
DO u have any suggestion ?
Click to expand...
Click to collapse
Not problem with ext3.
Try open Link2SD and try made Create a link manually. Maybe for some applications need to be done manually.
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
Click to expand...
Click to collapse
Settings and Auto link settings:
KaiserOrn said:
Can u link me all your config for Link2SD pls ?
EDIT: I have try to move all app to SD card (but inner space is less than before)
Click to expand...
Click to collapse
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
ZmisiS said:
Not to SD Card. You need try "Create link". If you can not, then it means that the link has automatically created.
Click to expand...
Click to collapse
I putt all as linked and i have ONLY10 MB free it is normal ?
How to partition to ext4 through CWM?
ZmisiS said:
I used Link2SD on CM10.1.4 (Android 4.2.2) of Jenkins. I've not problems. Before install ROM need partition SD Card on FAT32 and ext4 partitions. Now can install ROM. After install ROM, install Link2SD. Open Link2SD and select ext4, wait to make script. When script make you'll get a notification that the script is done and to you need reboot phone. Reboot phone. After reboot phone, open Link2SD and in Settings check Auto link. Exit from Link2SD and it is it.
When you install applications, you can get notification that is memory full. After this notification, reboot phone and memory will be O.K.
Click to expand...
Click to collapse
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
KaiserOrn said:
I putt all as linked and i have ONLY10 MB free it is normal ?
Click to expand...
Click to collapse
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
---------- Post added at 03:29 PM ---------- Previous post was at 03:26 PM ----------
freak744 said:
Does CM 7/10 support Link2SD? And if yes, which types of partitions? I have an ext2 partition but it does not work on cm7-based JellyBread v5.
How do I partition it to ext4 through TJstyle's cwm 5?
Click to expand...
Click to collapse
Need be ext3 or ext4. JellyBread I don't tried.
I don't partition with CWM. I do it with MiniTool Partition Wizard Home Edition. I installed it on PC and I connect phone with PC over USB.
I open MiniTool ... and made partition.
Select FAT32 Primary partition and ext4 Primary partition.
http://forum.xda-developers.com/wiki/SD_card_partitioning
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
After, I install Link2SD and it is it. My applications:
Click to expand...
Click to collapse
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
KaiserOrn said:
I have less 40 apps but no space, it is very strange but i don't understand why this happen. Do u have any idea? Can u ask inside BALTROM topic pls
EDIT: I don't understand very well what this app "Odex Me" work. If i use it i cannot not any type of theme so my phone will be all back and similar to terminal ?
Click to expand...
Click to collapse
With Odex Me free memory in Internal memory is bigger.
ZmisiS said:
With Odex Me free memory in Internal memory is bigger.
Click to expand...
Click to collapse
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
KaiserOrn said:
Can u explain me what kind of limitation give this kind of application pls? I don't understand very well from its topic
Click to expand...
Click to collapse
I don't understand you. I used OdexMe.apk and Link2SD. Since then I have internal memory and more than I need. I have no interference or slowing down the system. All works O.K.
Do u suggest me, to re-install all over again using your same application order?
KaiserOrn said:
Do u suggest me, to re-install all over again using your same application order?
Click to expand...
Click to collapse
Go in CWM. Now go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Flash ROM. After flash ROM again go on wipe data reset, wipe cashe partition and in Advanced, go on wipe dalvik cashe. Reboot Phone. Wait to system up, and it is about 5 minutes.
On SD Card you need have ODEXME.apk. Download it from here:
http://forum.xda-developers.com/showthread.php?t=2157251
Install Root Explorer. Open it and copy odexme.apk and paste it in system/app. Made Permissions for this .apk (rw,r,r). Reboot Phone. After Reboot Phone go in Applications and click on this Odexme.apk and follows instructions. Reboot Phone. After Reboot Phone open Root Explorer and go in system/app and check whether each application has its odex. If have, it is it.
Now install Link2SD. Open Link2SD and select ext4. Wait to make script. When made script, you will notification than script is made. Reboot Phone. After Reboot Phone, open Link2SD, go on Settings and check Auto link. Exit from Link2SD.
Before, you for Link2SD need partition SD Card on Primary FAT32 and primary ext4.
ZmisiS said:
How many applications you have installed? I've with default apps installed about 60 apps and 110 MB free. After install ROM I installed this:
http://forum.xda-developers.com/showthread.php?t=2157251
Click to expand...
Click to collapse
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
KaiserOrn said:
I have try to resinstall all. After ROM install (BALTROM), I have chose from explorer manager the app that i must install. I start it and it automatically restart my devide several time. After it finished, I have try to go into settings but every time cellphone crash (shut down).
Do u have any ideas?
Click to expand...
Click to collapse
I not use BALTROM. I don't know. I use CM10.1.4 of Jenkins.
Do u know if CM10.1.4 is fully translate in Italy? Because otherwise my parents cannot understand English
Hi;
i am a noob in the android world and i need a help
i have a sammsung SGH-I857 with 2.2.2 android version & 2.6.332.9-perf karnel version which is rooted
I want to release the maximum possible space of internal phone memoir because it small (177MO ONLY) 89.30 MB of space it used.
I would move them to the SD card (8GB) or remove them if it's possible ,but I do not know how knowing that my phone has never been changed at the ROM or Kernel or Recovery or anything like that
I also read that before anything i should use a custom recovery and make a backup of my current set up, so in case something gets messed up, i can restore the backup and be as good as new!,then install a ROM that can do what I want if it's possible
the problem is that I can not find how I did lots of research, but I have not found those for SGH-I857
so if you could tel me how ,done please & thank you in advance
NAPSTER
napster94 said:
Hi;
i am a noob in the android world and i need a help
i have a sammsung SGH-I857 with 2.2.2 android version & 2.6.332.9-perf karnel version which is rooted
I want to release the maximum possible space of internal phone memoir because it small (177MO ONLY) 89.30 MB of space it used.
I would move them to the SD card (8GB) or remove them if it's possible ,but I do not know how knowing that my phone has never been changed at the ROM or Kernel or Recovery or anything like that
I also read that before anything i should use a custom recovery and make a backup of my current set up, so in case something gets messed up, i can restore the backup and be as good as new!,then install a ROM that can do what I want if it's possible
the problem is that I can not find how I did lots of research, but I have not found those for SGH-I857
so if you could tell me how ,done please & thank you in advance
NAPSTER
Click to expand...
Click to collapse
First, you need to install Mount2SD or Link2SD, it will link (replace) your apps to SDcard. You can find it Mount2SD here and then you need to partitioning your SDcard first, just follow this instruction and you also get Link2Sd from here. I guess these apps don't need custom ROM or kernel to work. But custom recovery, like CWM or TWRP is necessary needed to do full backup (Nandroid Backup) of your current stock ROM.
Well, for custom recovery you can try ROM Manager (It's free app on Play Store), it will help you to install CWM Recovery. Or you can try TWRP Manager (it's also free app on Play Store) to play with custom recovery by TWRP.
Good Luck.
DO WITH YOUR OWN RISK.
zachnuryanto said:
First, you need to install Mount2SD or Link2SD, it will link (replace) your apps to SDcard. You can find it Mount2SD here and then you need to partitioning your SDcard first, just follow this instruction and you also get Link2Sd from here. I guess these apps don't need custom ROM or kernel to work. But custom recovery, like CWM or TWRP is necessary needed to do full backup (Nandroid Backup) of your current stock ROM.
Well, for custom recovery you can try ROM Manager (It's free app on Play Store), it will help you to install CWM Recovery. Or you can try TWRP Manager (it's also free app on Play Store) to play with custom recovery by TWRP.
Good Luck.
DO WITH YOUR OWN RISK.
Click to expand...
Click to collapse
is this the only solution? because I read that there a lot of people who could not make the SD card as it was (non-partitioned)!!
napster94 said:
is this the only solution? because I read that there a lot of people who could not make the SD card as it was (non-partitioned)!!
Click to expand...
Click to collapse
That's the only solution that I know. Just have a try, coz it's fine too if you only have class 4 SDcard.
oK i will thanks
hey , i have the same phone this is what i have done to gain 2go of app memory , root it with superoneclick , partition your sd using minitool partition wizard make one partition fat32 and another linuxswap make them both primary (ps: don't use your phone to partition) then instal link2sd and mount second partition fat32 ....linuxswap partition is the second partiotion for apps.... you are done ...just every time when you install a new app go to link2sd click on the app you want to move to second partition and then click create link. that's it
ps; for sgh-i857 users i lunched a thread for a costum rom!! support it here please : http://forum.xda-developers.com/showthread.php?p=48720803
---------- Post added at 01:26 PM ---------- Previous post was at 01:15 PM ----------
napster94 said:
Hi;
i am a noob in the android world and i need a help
i have a sammsung SGH-I857 with 2.2.2 android version & 2.6.332.9-perf karnel version which is rooted
I want to release the maximum possible space of internal phone memoir because it small (177MO ONLY) 89.30 MB of space it used.
I would move them to the SD card (8GB) or remove them if it's possible ,but I do not know how knowing that my phone has never been changed at the ROM or Kernel or Recovery or anything like that
I also read that before anything i should use a custom recovery and make a backup of my current set up, so in case something gets messed up, i can restore the backup and be as good as new!,then install a ROM that can do what I want if it's possible
the problem is that I can not find how I did lots of research, but I have not found those for SGH-I857
so if you could tel me how ,done please & thank you in advance
NAPSTER
Click to expand...
Click to collapse
hey , i have the same phone this is what i have done to gain 2go of app memory , root it with superoneclick , partition your sd using minitool partition wizard make one partition fat32 and another linuxswap make them both primary (ps: don't use your phone to partition) then instal link2sd and mount second partition fat32 ....linuxswap partition is the second partiotion for apps.... you are done ...just every time when you install a new app go to link2sd click on the app you want to move to second partition and then click create link. that's it
ps; for sgh-i857 users i lunched a thread for a costum rom!! support it here please : http://forum.xda-developers.com/showthread.php?p=48720803
There is no current custom recovery solution for the Samsung DoubleTime (SGH-I857).
I am however trying to make this exist as well as a whole other ROM option that may allow Gingerbread to be ran on the device. So far the base of operations has been the thread in which Dardour has posted a link to above. That however seems to be broken. So here it is again: http://forum.xda-developers.com/showthread.php?t=2580216
Well best of a good day to you.
Hey
im just update cm11 ver7 to ver11
in aroma installer im choose link2sd
what im need to do??
because im want to create partition
and i dont have partition
sorry about the english
eran32 said:
Hey
im just update cm11 ver7 to ver11
in aroma installer im choose link2sd
what im need to do??
because im want to create partition
and i dont have partition
sorry about the english
Click to expand...
Click to collapse
First you should install "mini tool partition wizard" to your Windows. This program is very easy to use and makes partitions on all kind of HDs, SD-Cards, etc. After installing the program on Windows, insert your SD into a card reader and follow the steps of the program. You can find many information about using the "mini tool". Make an EXT4 type partition on your SD. Mine EXT4 part size is 512mb and it is enough. But you can make it larger too.
Cant increase internal memory. I tried Link2SD, Minitool partition wizard, INT2EXT, INT2EXT+, INT2EXT4, INT2EXT4+, INT2EXTV2+ and nothing worked! I use this ROM http://forum.xda-developers.com/showpost.php?p=54007024&postcount=2021
Please help, thanks in advance!
felix311 said:
Cant increase internal memory. I tried Link2SD, Minitool partition wizard, INT2EXT, INT2EXT+, INT2EXT4, INT2EXT4+, INT2EXTV2+ and nothing worked! I use this ROM http://forum.xda-developers.com/showpost.php?p=54007024&postcount=2021
Please help, thanks in advance!
Click to expand...
Click to collapse
Hi I discovered a guide: [Guide][07/03/2014] CM11 installation, Memory problem in your devices development forum which appears to address this issue. From the thread:
If you are a user who doesnt install use or install many apps but want the memory increase:
Just go in settings-> Extras->Tick on /mount /sd ext option->Restart your device.(Not for RC2 as there is no option to enable ext))
If you are using many apps then refer this: (Its int2ext)Script or else you wont be able to download apps from playstore.
The reason for not able to install apps from playstore
The inbuilt script is int2ext+ Which leaves /data to /data (The reason and explanation in detail Check Here)
List of all scripts working check here: Cronmod Scripts
How to copy paste scripts and list of scripts : Check here
If you dont want to do any copy and pasting of scripts just follow this steps:
1. Open the rom zip .. Dont extract
2. Go to system/etc/init.d
3. Now copy the above script in the location given in 2nd step.. It will ask for replace replace it..(Not applicable on RC2)
4. Now flash the rom.
5. Done
Click to expand...
Click to collapse
I hope this sorts your issue out
I think this can help me out, thank you very much! But i cant open Click Here in your thread :/
Oh nothing, i foud it Thanks again.