Database Info

I need assistance on how to get back to my stock Gingerbread ROM. HTC Sensation XE

I have my HTC Sensation XE which has originally the 2.3.4 Gingerbread.
I would like to have an assistance on how to do it?
Do I need to flash specific firmwares? Where could I get it? and is it safe to use the backup I made before with that Gingerbread Rom?
Thank you.
I used SUPERCID method.. Therefore I'm not exactly sure whats my CID number and RUU but im pretty sure its either HTC__038 or HTC__044 asia or wwe_asia.
If it helps , I had some Starhub apps, Singtel or whatever, so I assume its more of an HTC__044 CID number?
Thank you.

If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium

stringer7 said:
If you did superCID you don't need to worry about which ruu you use. There is a stock GB ruu link in the s-on section of the sticky guide to everything in the dev forum.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.

ardom said:
Thank you for the response. But im trying to get the OTA also.
That's why I want to be sure about my RUU. and CID ^^, Thank you.
Click to expand...
Click to collapse
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium

stringer7 said:
OK, you can find your original cid by entering "getprop ro.cid" in terminal emulator.
Sent from my HTC Pyramid using xda premium
Click to expand...
Click to collapse
I had changed my CID when i rooted mine i used supercid method and changed it to 11111111 i forgot my original ru. Im nt sure exactly too if its wwe_asia or asia but im sure its either of the two. I had Starhub app too so i have a premonition that it could be htc__044 or asiawwe singapore version.
Im confused lol. I Want to go back to my stock ruu and cid. Or least the cid so i could restore my backup if possible. Then if ever i ota update. Less prblems could be encountered.
Sent from my HTC Sensation XE with Beats Audio

What are the steps I need to do?
Which to flash? any firmware?
THank you.

This is a prime example of making sure you check for the RUU BEFORE you flash anything new
Do what is said above and it will tell you your original CID. We can then see if we can find the RUU

Good luck. I just updated my xe to ics by simply reading a lot of posts on this site. And simply following all instructions.
At first tho, I mistakenly flashed sensation and not sensation xe. But again, found the correct files here on this site. All sorted and now have beats audio back, now with sense and ics latest.
So many helpful people here, so I hope you too get your fine sorted to the way you want yours. Although curious as to why you wanna go back to gb.
Surely ics is better?
Sent from my HTC Sensation XE with Beats Audio Z715e using XDA

hi
hi guys, do you have any link for official Gingerbread RUU 1.73 with beats audio for sensation XE? i just turn my sensation XE to s-on and flash the RUU but i flashed a wrong ruu.thanks guys.i want to update my sensation XE to ics through system update

Are you S-ON again now? If so, you'll need to S-OFF before you can flash the XE RUU (which you can find here):
https://www.yousendit.com/download/M3BtWmd2YWJ6NE5qQTlVag

Its already 1111111 for my CID. Im planning to go back to stock gb so i can get the ota ics and try it out.
Sent from my HTC Sensation XE with Beats Audio

Yes my phone is s-on again, so how do I flash the ruu?and just s-off? No need to do rooting?thanks

Help ~ Loop boot
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much

soldierforus said:
I was gonna revert to my stock Gingerbread 2.3.4, I was trying to achieve ICS 4.x and Cyanogen mod 9, but I n00bed it up and wound up in a boot loop. I've read several different tutorials and I gathered I need to flash back to Stock GB. Do I just need a link to a Stock GB that fits my CID?
CID = T-MOB010
No Super CID
No RUU
Thanks much
Click to expand...
Click to collapse
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution

ganeshp said:
yes yes stock GB would do ..also ..you have stock ICS for that cid too want that ?
GB RUU for TMOB USA
ICS RUU for TMOB USA (post #1 section #3 has the link to RUU's)
but
care to explain more what happened ?..it probably might be a small solution
small details would do ..
complete details present in the bootscreen (a screenshot would do too)
also
a complete output of the following command (except IMEI and serail number)
fastboot getvar all
then i can give you a perfect solution
Click to expand...
Click to collapse
Sorry to double post, I thought this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later I found a cynaogen tutorial to help with boot loop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So how do the RUU's function exactly? I read the glossary term in wiki, but I don't fully understand the concept. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again

soldierforus said:
Sorry to double post, I though this may be a dead thread since the previous post had a question and no reply in 4 months.
_____________________________________________
The Details:
Boot loop began after I flashed to firmware 3.32 using:
Universal Firmware 3.32 Universal (Non-TMOUS): Since I am on TMO, I gather I should have used the TMOUS flash?
DOWNLOAD: http://d-h.st/afS
MD5: 8f50e9f4f3fab7edcd4013015703f81c
From this tutorial: http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
I later found a cynaogen turoial to help with bootloop and followed these steps:
1) Set to factory reset
2)Cleared Delvick (sp?) Cache
____________________________________________
Current Boot Screen:
Revolutionary
Pyramid PVT SHIP S-OFF RL
HBOOT 1.27.1100
RADIO-11.22.3504.07_M
OpenADSP-v02. 6. 0. 226.00.0131
eMMC-boot
_____________________________________________
Getvar all Results:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.1100
(bootloader) version-baseband: 11.22.3504.07_M
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.32.401.3
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5810000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 3816mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.490s
So How the RUU's function exactly. They will update my ROM through window? I guess I need to be able to kill this boot loop first though.
Thanks again
Click to expand...
Click to collapse
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU

No-Go
ganeshp said:
for RUU ..you need to connect the phone in bootloader to pc ..and then just double click on it ...that will do
one last try for flashing custom rom ..still not worked then go for RUU
btw what recovery you are using ?
if using cwm ...can you switch to 4EXT recovery ?
get the recovery image from the below db link (recovery.img inside the zip)
4EXT DB link
and flash it via fastboot
fastboot flash recovery recovery.img
got to the recovery
4EXT->wipe|format->format all partitions except sdcard
then back to main menu ...and flash the rom (what ever custom rom you want)
then reboot and see..if it still stuck at boot logo
then extract the boot.img from the rom zip file
and flash it manually
fastboot flash boot boot.img
then reboot
still stuck ?
then reflash the firmware (be sure to check the md5 of the firmware you have downloaded)
still stuck?
then RUU
Click to expand...
Click to collapse
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?

soldierforus said:
So it wouldn't let me flash 4ext, it says: "cannot load 'recovery.img'" I didn't unzip it or even leave the zip in the root, I took only the recovery.img and left it in to sd root.
You said to flash the custom ROM, but this is my first attempt, and although I have downloaded CM9, the instructions I have read from other tutorials tell me I have to upgrade first to firmware 3.32, then to firmware 3.33, then I can install CM9, which will give me ICS/4.x Am I correct so far?
I don't even know if the 3.32 flash was a success (Do you?) since now I am in a boot loop. Could it be because I should have used the TMOUS instead of the non-TMOUS universal for 3.32? I picked the non-TMOUS because I didn't realize what TOUS stood for at the time, and the other link said universal (and the android-info had my cid/mid)
Also thanks for the RUU links, but I don't know what good the ICS will do if I don't have it yet. Those RUU's will do what exactly? Update to the latest ROM ? Also, is that for all roms or just 3rd party? Looking at the getvar log I sent you, I gather the 3.32 did work, So I should download the ICS 3.32 RUU link you sent me. That's what I am going to try now
EDIT
________________________________
I re-installed cm9, AND EUREKA!!!!!! My first custom ROM. Many thanks to all who helped! Now which RUU do I use, and how often should I run it?
Click to expand...
Click to collapse
RUU is rom update utility.. It's official htc file
Ruu is complete software for your phone
It wipes everything.. Rom, recovery firmware.. Everything and flashes the corresponding stock One...
So when you run ics ruu.. You will have complete ics stock rom of tmobile US
And the recovery flash you did earlier was wrong..
You need to keep that recovery file in the adb folder (it should be in pc) Then the command will fetch the file.. As you have kept it on top of sdcard.. It can't find it..
Sent from my pyramid.. Through blazing fast sonic waves

HTC Sensation Stuck In Hboot Screen!

tried to go back to stock rom, but I tried turning off my phone, taking out the battery, taking sd/sim card out. and still takes me to the hboot screen. I also tried running the ruu again and couldn't update.
PYRAMID PUT SHIP S-ON RL
HBOOT-1.17.0008
RADIO-10.11.9007.15_M

Existent said:
tried to go back to stock rom, but I tried turning off my phone, taking out the battery, taking sd/sim card out. and still takes me to the hboot screen. I also tried running the ruu again and couldn't update.
PYRAMID PUT SHIP S-ON RL
HBOOT-1.17.0008
RADIO-10.11.9007.15_M
Click to expand...
Click to collapse
Hey you are S-ON so you can't go back.. Normally... But your hboot and all are of gb...
If you have adb/fastboot
Can you give me the output of
fastboot getvar all ( post complete output except imei and serial number)
Also post the RUU name
Sent from my pyramid.. Through blazing fast sonic waves

ganeshp said:
Hey you are S-ON so you can't go back.. Normally... But your hboot and all are of gb...
If you have adb/fastboot
Can you give me the output of
fastboot getvar all ( post complete output except imei and serial number)
Also post the RUU name
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
version 0.5
bootloader 1.17.0008
baseband: N/A
cpld none
microp none
main: 1.27.531.2
product pyramid
platform hboot-8260
modelid PG5810000
bat status good
security on
build mode ship
boot-mode fastboot
commitno bootloader: 3f6ba3d6
RUU Name: RUU_Pyramid_TMOUS_1.27.531.2_Radio_10.42.9007.00P_10.11.9007.15_M_release_192098_signed

Hey still couple are missing from the info
Cid and the ruu name I asked
To get cid
fastboot getvar cid
And also please post the ruu complete name..
Then I can suggest how to run the ruu.. In a workable way
Sent from my pyramid.. Through blazing fast sonic waves

ganeshp said:
Hey still couple are missing from the info
Cid and the ruu name I asked
To get cid
fastboot getvar cid
And also please post the ruu complete name..
Then I can suggest how to run the ruu.. In a workable way
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Sorry About That.
version 0.5
bootloader 1.17.0008
baseband: N/A
cpld: none
microp: none
main: 1.27.531.2
product: pyramid
platform: hboot-8260
modelid: PG5810000
cid: Tmobile
battery status: good
battery voltage: 3800 mV
partition layout: Generic
security: on
build mode: ship
boot-mode: fastboot
commitno bootloader: 3f6ba3d6
hbootpreudate: 11
gencheckpt: 0
RUU Name: RUU_Pyramid_TMOUS_1.27.531.2_Radio_10.42.9007.00P_ 10.11.9007.15_M_release_192098_signed

ganeshp said:
Hey still couple are missing from the info
Cid and the ruu name I asked
To get cid
fastboot getvar cid
And also please post the ruu complete name..
Then I can suggest how to run the ruu.. In a workable way
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
cid is : T-MOB010

Dude cid is Tmobile? You serious?
You edited it didn't you LMAO
Anyways I guess your phone is of tmobile US one (cid is TMOB010)
and the ruu is matching.. So run it again.. Normally.. With phone connected in fastboot to pc (phone reads fastboot usb)
If it still failed let me know.. I'll give you the manual way to flash
Sent from my pyramid.. Through blazing fast sonic waves

ganeshp said:
Dude cid is Tmobile? You serious?
You edited it didn't you LMAO
Anyways I guess your phone is of tmobile US one (cid is TMOB010)
and the ruu is matching.. So run it again.. Normally.. With phone connected in fastboot to pc (phone reads fastboot usb)
If it still failed let me know.. I'll give you the manual way to flash
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Ha yeah sorry again about that D;
but yeah it still failed keeps bringing me back to the hboot screen.
I'm also currently downloading another RUU.
:/

Here is the manual way to flash ruu
First you need to get the rom.zip from ruu
Here is the guide to do that
http://www.freeyourandroid.com/guide/extract-rom-from-ruu
Do it until step 5 only and just get the rom.zip and keep it in your adb folder
Then open command window and type these one by one (with phone connected in fastboot)
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver htc)
fastboot flash zip rom.zip (I'm interested in this output.. Post the output if it stuck... Don't kill it at any point if failed/stuck)
fastboot reboot (reboots the phone)
Sent from my pyramid.. Through blazing fast sonic waves

ganeshp said:
Here is the manual way to flash ruu
First you need to get the rom.zip from ruu
Here is the guide to do that
http://www.freeyourandroid.com/guide/extract-rom-from-ruu
Do it until step 5 only and just get the rom.zip and keep it in your adb folder
Then open command window and type these one by one (with phone connected in fastboot)
fastboot erase cache (if failed ignore it)
fastboot oem rebootRUU (black screen with silver htc)
fastboot flash zip rom.zip (I'm interested in this output.. Post the output if it stuck... Don't kill it at any point if failed/stuck)
fastboot reboot (reboots the phone)
Sent from my pyramid.. Through blazing fast sonic waves
Click to expand...
Click to collapse
Thank you very much!! I really appreciate that you took your time to help a noob like me out!<3

Existent said:
Thank you very much!! I really appreciate that you took your time to help a noob like me out!<3
Click to expand...
Click to collapse
Glad it worked...
The actual ruu.. Does the same way too.. But sometimes it fails.. Idk why
Sent from my pyramid.. Through blazing fast sonic waves

htc sensation 4g t mobile stuck in hboot/juonpbear screen
Hi sorry to bother but my htc sensation 4g didn't complete the juopunutbear and now all i can do is get into the hboot and juopunutbear screens ive tried too ruu but it wont complete and i cannot get the adb to work either can someone tell me how to reflash the ruu through hboot it was on the new ics with 1.27 hboot

hey does any one know how to change soft keys colour of htc sensation to original
its blueish

loki6475 said:
Hi sorry to bother but my htc sensation 4g didn't complete the juopunutbear and now all i can do is get into the hboot and juopunutbear screens ive tried too ruu but it wont complete and i cannot get the adb to work either can someone tell me how to reflash the ruu through hboot it was on the new ics with 1.27 hboot
Click to expand...
Click to collapse
Ok need for ruu
Try the troubleshoot point #4 in my soff guide.. Link in my signature
Sent from my HTC Sensation 4G using xda premium

I have the same problem and this not work
Existent said:
Thank you very much!! I really appreciate that you took your time to help a noob like me out!<3
Click to expand...
Click to collapse
DOn´t work

HAMLET93 said:
DOn´t work
Click to expand...
Click to collapse
What didn't work for you?
Sent from my HTC Sensation using xda premium

i tried the method to flash rom.zip with fastboot y nothing
ganeshp said:
What didn't work for you?
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Ok I will tell you my problem, before yesterday I install a custom rom with 4EXT touch recovery, according to this recovery does not need the s-off saw many videos and it worked but when I use it did not work and tells me that the installation was completed but does not start when I give reboot from the recovery begins but before loading the rom restarts and hence does not pass, please help : (.... and I have the bootloader unlocked

HAMLET93 said:
Ok I will tell you my problem, before yesterday I install a custom rom with 4EXT touch recovery, according to this recovery does not need the s-off saw many videos and it worked but when I use it did not work and tells me that the installation was completed but does not start when I give reboot from the recovery begins but before loading the rom restarts and hence does not pass, please help : (.... and I have the bootloader unlocked
Click to expand...
Click to collapse
Just having 4EXT recovery doesn't suffice
You need to enable smartflash before flashing any rom..
Check the guide "flashing roms with son" by asskickar in sensation general section
Sent from my HTC Sensation using xda premium

I did that you say but the same rom installed but will not let me log in
ganeshp said:
Just having 4EXT recovery doesn't suffice
You need to enable smartflash before flashing any rom..
Check the guide "flashing roms with son" by asskickar in sensation general section
Sent from my HTC Sensation using xda premium
Click to expand...
Click to collapse
Eh not done it right now to see him running the rom but nothing I give reboot always when loading the image of botting and before interacting with it or stick or restarts

HAMLET93 said:
Eh not done it right now to see him running the rom but nothing I give reboot always when loading the image of botting and before interacting with it or stick or restarts
Click to expand...
Click to collapse
Smartflash need to be enabled in recovery and then reflash the rom
As I told you you need to read the guide.. It explains the correct procedure in flashing Roms while being son
Sent from my Nexus 7 using xda premium

[Q] Failed Upgrade and stuck HTC Logo

Hi, so here's the whole thing, I did unlock (using htc dev) and root my HTC sensation, then I tried to update it to Cyanogenmod 10.1 for jellybean. I forgot to S-off my phone that I think causing the upgrade to get hang and stuck on rotating logo of Cyanogenmod. After a while, when i try to re install it, it get stuck on the boot of the phone which is the HTC logo.
I try to flash different stock ROM according to my CID (htc__44). I try the Lower version and the higheer version, but still fail upon checking the signature. It seems like all the downloaded RUU is not compatible. I also do this step as my last OPTION http://forum.xda-developers.com/showthread.php?t=1672425
See Device Details
c:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.27.0000
(bootloader) version-baseband: 11.24A.3504.31
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.33.707.51
(bootloader) product: pyramid
(bootloader) platform: HBOOT-8260
(bootloader) modelid: PG5813000
(bootloader) cidnum: HTC__044
(bootloader) battery-status: good
(bootloader) battery-voltage: 3775mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: RUU
(bootloader) commitno-bootloader: 617f0a98
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.760s
I'm running out of option here. I am thinking that Iam not hitting the right RUU for my device. I can't find anywhere to download the RUU for version 3.33.707.51. I'll appreciate all the help. I need to make this things work.

Did u install 4 ext recovery ??
If yes then enable smart flash from recovery..
And install any ics or jb Rom ..
S off not require for installing Rom . ,
Sent from my HTC Sensation using xda app-developers app

Itsakash said:
Did u install 4 ext recovery ??
If yes then enable smart flash from recovery..
And install any ics or jb Rom ..
S off not require for installing Rom . ,
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
No. I install CWM recovery. And I forgot to backup the working my working ICS Rom before i install the custom one.. oh men! Tha't why I don't know to get this things back to working mode.

Then install 4 ext recovery.. and try above suggested options
For install 4xt use kgs utility
Or
Step 1 for install 4ext from here http://forum.xda-developers.com/showthread.php?t=1472298
Sent from my HTC Sensation using xda app-developers app

Itsakash said:
Then install 4 ext recovery.. and try above suggested options
For install 4xt use kgs utility
Or
Step 1 for install 4ext from here http://forum.xda-developers.com/showthread.php?t=1472298
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
hi! i did this a while.. but still no luck. I'm still stuck on HTC logo screen. I don't know if the ROM that I download has a problem.. Would you recommend one? I'm still looking for the right Stock Rom for my device. I'm thinking that this is my only hope..

Download any ics Rom
Eg vipers or arhd
Place in root of sd card
Reboot to bootloader select recovery .. . wipe/ factory reset
Enable smart flash from recovery and select zip and install
Sent from my HTC Sensation using xda app-developers app

Itsakash said:
Download any ics Rom
Eg vipers or arhd
Place in root of sd card
Reboot to bootloader select recovery .. . wipe/ factory reset
Enable smart flash from recovery and select zip and install
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
yes. I did install the custom rom from cyna for JB. wipe->smart flash-> install.. but still no luck. I'm currently downloading any rom for ICS. hope it will work this time. i'll tell once i try.
by the way.. is their anyway to S-off a device just like mine? without really opening the and only ung fastboot? I'm thinking if i can S-off this, I can flash any version without ease?

mc.denison.m.cairo delete your serial number and imei from your first post
don't show them in public

mc.denison.m.cairo said:
yes. I did install the custom rom from cyna for JB. wipe->smart flash-> install.. but still no luck. I'm currently downloading any rom for ICS. hope it will work this time. i'll tell once i try.
by the way.. is their anyway to S-off a device just like mine? without really opening the and only ung fastboot? I'm thinking if i can S-off this, I can flash any version without ease?
Click to expand...
Click to collapse
Pressed thanks button by mistake
Hm
I think u can do s off but I am not sure ..batter to take advice of experts..
But s off is required for changing firmware , cid for flashing any RUU
BTW
Happy New year
Sent from my HTC Sensation using xda app-developers app

There is always a way out of a problem since they already told u, you need to flash 4ext with smartflash since u have s-on so if u can boot into recovery i recommend looking for a stock ics rom probably a deoxide and try flashing it into your phone here u go hopefully this helps...
http://forum.xda-developers.com/showthread.php?t=1529941
"HTC Amaze - Nightmare Sense 1.6"
"HTC Sensation - MIUI"
"LG G2x - Stock and overclocked"
"LG Thrill - Slim Stock Rom"

Or alternatively since you already have HTC Dev Unlock, why not go on and S-off?
Use KGS or any AIO to S-off, change Cid and install 4ext...
To use the utilities, you'll just need to boot into Hboot...
Then follow the instructions in the window...

ted619 said:
There is always a way out of a problem since they already told u, you need to flash 4ext with smartflash since u have s-on so if u can boot into recovery i recommend looking for a stock ics rom probably a deoxide and try flashing it into your phone here u go hopefully this helps...
http://forum.xda-developers.com/showthread.php?t=1529941
"HTC Amaze - Nightmare Sense 1.6"
"HTC Sensation - MIUI"
"LG G2x - Stock and overclocked"
"LG Thrill - Slim Stock Rom"
Click to expand...
Click to collapse
Yes I have done this, I have install different ROM and it installed successfully. I have tried 2, the one that Viper has and the deoxide. After installation, the phone reboot and still I'm stuck on the logo... just the HTC logo, i don't even get reach to the boot of HTC quietly brilliant, just the plain logo. I don't know what the meaning of that.

mc.denison.m.cairo said:
Yes I have done this, I have install different ROM and it installed successfully. I have tried 2, the one that Viper has and the deoxide. After installation, the phone reboot and still I'm stuck on the logo... just the HTC logo, i don't even get reach to the boot of HTC quietly brilliant, just the plain logo. I don't know what the meaning of that.
Click to expand...
Click to collapse
ok guys its working! Brilliant!!!! a million thanks! the JB rom works! And I hope it works perfectly!

mc.denison.m.cairo said:
ok guys its working! Brilliant!!!! a million thanks! the JB rom works! And I hope it works perfectly!
Click to expand...
Click to collapse
Can someone please explain what just happened?
ICS didn't work for him on Smartflash, but JB did... *what*

SleepyKrushna said:
Can someone please explain what just happened?
ICS didn't work for him on Smartflash, but JB did... *what*
Click to expand...
Click to collapse
I'm sorry, I forgot to mention.. The ICS rom, bth mention above work for me, its just that I need to manually to fastboot the "boot.img" to resolve my stuck htc logo issue.. when I found it out that it is loading fine, I immediately flash my JB Rom and the boot.img from the rom zip file. Don't forget to always smart flash..

mc.denison.m.cairo said:
I'm sorry, I forgot to mention.. The ICS rom, bth mention above work for me, its just that I need to manually to fastboot the "boot.img" to resolve my stuck htc logo issue.. when I found it out that it is loading fine, I immediately flash my JB Rom and the boot.img from the rom zip file. Don't forget to always smart flash..
Click to expand...
Click to collapse
Ahhhh..... OK. I got real confused there... :laugh:
I'm S-OFF... no Smartflash needed here...

mc.denison.m.cairo said:
I'm sorry, I forgot to mention.. The ICS rom, bth mention above work for me, its just that I need to manually to fastboot the "boot.img" to resolve my stuck htc logo issue.. when I found it out that it is loading fine, I immediately flash my JB Rom and the boot.img from the rom zip file. Don't forget to always smart flash..
Click to expand...
Click to collapse
Pls tell me which boot.img u used to fix ur reboot issue i am exactly stuck on same to same issue ... i have 4ext even with smartflash on every custom rom reboots on me. dont have nandroid back up stock gingerbread on it. did u rename it to phXXX.img and flash boot.img .. but which one ... plz share in detail and file if possible have been trying since 3 days.

raviz said:
Pls tell me which boot.img u used to fix ur reboot issue i am exactly stuck on same to same issue ... i have 4ext even with smartflash on every custom rom reboots on me. dont have nandroid back up stock gingerbread on it. did u rename it to phXXX.img and flash boot.img .. but which one ... plz share in detail and file if possible have been trying since 3 days.
Click to expand...
Click to collapse
post your bootloader details

rzr86 said:
post your bootloader details
Click to expand...
Click to collapse
hboot-1.92.0000
s-on
i had unloked the bootloader through htcdev.

raviz said:
hboot-1.92.0000
s-on
i had unloked the bootloader through htcdev.
Click to expand...
Click to collapse
not 1.92.0000.i think you mean 1.29.0000
try this
format all partitions except sdcard from 4ext
enable smartflash
flash the rom
done
wait 3-5 minutes because the first boot takes a while
if that fails then see extra 1 step from here(flashing boot.img)
http://forum.xda-developers.com/showthread.php?t=1631861

How To Update Firmware

I decided to write this, even though it was already written by SO many people already, to have it in an easily accessible spot
YOU MUST ALSO BE SUPERCID!!
YOU MUST BE S-OFF!!!!!!! http://forum.xda-developers.com/showthread.php?t=2155071
So here we go!
2.15 Firmware: http://www.androidfilehost.com/?fid=23060877490004040
2.18 Firmware: https://www.androidfilehost.com/?fid=23329332407572084
Download the firmware zip. Put it in a folder where you have the fastboot sdk tool
Plug your phone in with USB Debugging
Reboot into bootloader:
adb reboot bootloader
Click to expand...
Click to collapse
Open a command window in the folder with fastboot sdk
Once the phone gets to bootloader, go into fastboot
Check if fastboot commands are working:
fastboot devices
Click to expand...
Click to collapse
Now the fun starts:
fastboot oem rebootRUU
fastboot flash zip <WhateverYouCalledYourFirmwareZip.zip>
Click to expand...
Click to collapse
if it shows FAILED (remote: 90 hboot pre-update! please flush image again immediately)":
fastboot flash zip <WhateverYouCalledYourFirmwareZip.zip>
Click to expand...
Click to collapse
If it ends with "INFO..... OK", reboot to the bootloader:
fastboot reboot-bootloader
Click to expand...
Click to collapse
Verify everything was successful by running:
fastboot getvar all
Click to expand...
Click to collapse
This is what you're supposed to see:
(bootloader) version: 0.5
(bootloader) version-bootloader: 2.15.0000 (2.18.0000 if you used the 2.18 zip)
(bootloader) version-baseband: 1.31a.32.45.16_2
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.08.111.2 (5.18.xxx.x if you used 2.18 zip)
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: evita
(bootloader) platform: HBOOT-8960
(bootloader) modelid: PJ8310000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4140mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-de589c6eef
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
Reboot into Android:
fastboot reboot
Click to expand...
Click to collapse
Reboot into Recovery:
fastboot reboot-recovery
Click to expand...
Click to collapse
Thanks to Turge and everyone else who helped with this firmware and Sense 5
Thanks @24ky for 2.18 firmware zip
CLICK THANKS IF I HELPED!!!!!!

I might be wrong, but this probably belongs in the General section as it isn't your own development.
Sent from my Evita

Moved to General.

Yeah sorry guys. Was in a rush to create this between classes and wasn't paying attention to the section.
Sent from my HTC One XL using XDA Premium 4 mobile app

Worked fine
I saw this in other threads but used this one since it was right there at the top. Everything went fine, thanks

Madcat8686 said:
I saw this in other threads but used this one since it was right there at the top. Everything went fine, thanks
Click to expand...
Click to collapse
can you do update to firmware 2.15 with S-ON and no SuperCID (it's still Roger001)?
cause I'm getting lost connection and random reboots with Viper XL 4.2.0
I tried Beastmode kernel but WiFi stopped working..

No you can't. Maybe it's time you got SuperCID and s-off, it's a good thing to have anyway.
Sent from my Evita

timmaaa said:
No you can't. Maybe it's time you got SuperCID and s-off, it's a good thing to have anyway.
Sent from my Evita
Click to expand...
Click to collapse
believe me I want to!
but I'm not sure how to do it yet.
(chicken-egg situation, lol)
I've read conflicting things, like you have to have SuperCID first before you S-off..
but then I read that you need to S-off first
which one is it?

If you can't read and understand the instructions in the S-OFF thread you are not ready
Sent from my HTC One XL

Get s-off before they patch it in the next update. Besides, you can fully customize your systems with kernels easily
Did I mention no fastboot commands?
Sent from my HTC One XL using XDA Premium 4 mobile app

clockwars said:
believe me I want to!
but I'm not sure how to do it yet.
(chicken-egg situation, lol)
I've read conflicting things, like you have to have SuperCID first before you S-off..
but then I read that you need to S-off first
which one is it?
Click to expand...
Click to collapse
It's stated pretty clearly in the s-off thread that you must have SuperCID first. I'm not sure where you think you read that s-off is required for SuperCID but that's 100% incorrect.
Sent from my Evita

timmaaa said:
It's stated pretty clearly in the s-off thread that you must have SuperCID first. I'm not sure where you think you read that s-off is required for SuperCID but that's 100% incorrect.
Sent from my Evita
Click to expand...
Click to collapse
no offence!
I'm not accusing anyone of anything! lol
and I'm obviously not an Android guru..
As you can see from my number of posts, I'm not a regular here!
so I wasn't following the progress of things..
and I'm not familiar with the specific thread you guys mention.
I was mostly using Google,
and trying to find someone with a Rogers version, to see how they did it.
And almost every bit I found would read "SuperCID for S-off" so I assumed that you need an S-off device in order to get SuperCID..

Ok, I wouldn't suggest going to any site for info other than XDA, you could end up with incorrect information as other sites don't properly distinguish between models. Long story short, stay on XDA and specifically within this forum.
You can get SuperCID using hex edit method. Then you can get s-off using Facepalm S-off.
Sent from my Evita

clockwars said:
no offence!
I'm not accusing anyone of anything! lol
and I'm obviously not an Android guru..
As you can see from my number of posts, I'm not a regular here!
so I wasn't following the progress of things..
and I'm not familiar with the specific thread you guys mention.
I was mostly using Google,
and trying to find someone with a Rogers version, to see how they did it.
And almost every bit I found would read "SuperCID for S-off" so I assumed that you need an S-off device in order to get SuperCID..
Click to expand...
Click to collapse
You are definitely on the right site but you need to read through the directions and understand what they mean. It's important that you know just what S-Off and Super CID mean to the phone before you try these procedures out. Taking a test drive without getting ALL the steps (and there are more) in order and correct CAN and WILL brick your phone. Bottom line...spend the time researching what you need to do to get where you want to be. Good luck out there.

Madcat8686 said:
You are definitely in the right sight but you need to read through the directions and understand what they mean. It's important that you know just what S-Off and Super CID mean to the phone before you try these procedures out. Taking a test drive without getting ALL the steps (and there are more) in order and correct CAN and WILL brick your phone. Bottom line...spend the time researching what you need to do to get where you want to be. Good luck out there.
Click to expand...
Click to collapse
Yeah I can see this site is a wealth of information.
A lot of brilliant people here!
timmaaa said:
Ok, I wouldn't suggest going to any site for info other than XDA, you could end up with incorrect information as other sites don't properly distinguish between models. Long story short, stay on XDA and specifically within this forum.
You can get SuperCID using hex edit method. Then you can get s-off using Facepalm S-off.
Sent from my Evita
Click to expand...
Click to collapse
thanks a million!
you sir are a true gentleman.
I followed the SuperCID instructions and everything seemed to work perfectly.
Now when I type: fastboot oem readcid in fastboot I get: (bootloader) cid: 11111111
which is great, but I also have an app called CID Getter (with a cupcake icon), and that app is telling me that my CID is [ROGER001].
Before I go any further, I need your help!
what does it mean?
I rebooted in fastboot again and fastboot oem readcid command still gives me 11111111

CID Getter doesn't display the correct CID, I'm not sure where it pulls it from but it's incorrect. The 11111111 you get from the fastboot command is your true CID so you can go ahead and proceed with s-off.
Sent from my Evita

Hi i am pretty new to the forums but have been flashing roms for awhile. I have super cid and s-off and recently upgraded to 2.15 after I was having a lot of random reboots/boot loops/no signal on CM10.2, CarbonJB, Beanstalk. I could only get my phone to boot with the 2.14 hboot when i flashed KickDroid but there were still no signal problems and some random reboots.
This seems to be fixed with the 2.15 hboot but I've been wanting to return to a pure android rom for awhile. I hear 2.15 does not work with any non-sense roms and indeed when i tried to flash CM10.2 again it would bootloop. I have heard however, in random threads throughout the forums that i could possibly use 2.15 hboot along with the Beastmode kernel to run Beanstalk.
Does anybody who is more knowledgeable than me at these things know which roms are now compatible with the 2.15 update?

Hailfire said:
Hi i am pretty new to the forums but have been flashing roms for awhile. I have super cid and s-off and recently upgraded to 2.15 after I was having a lot of random reboots/boot loops/no signal on CM10.2, CarbonJB, Beanstalk. I could only get my phone to boot with the 2.14 hboot when i flashed KickDroid but there were still no signal problems and some random reboots.
This seems to be fixed with the 2.15 hboot but I've been wanting to return to a pure android rom for awhile. I hear 2.15 does not work with any non-sense roms and indeed when i tried to flash CM10.2 again it would bootloop. I have heard however, in random threads throughout the forums that i could possibly use 2.15 hboot along with the Beastmode kernel to run Beanstalk.
Does anybody who is more knowledgeable than me at these things know which roms are now compatible with the 2.15 update?
Click to expand...
Click to collapse
AOSP-wise, I'm pretty sure CFX is 2.15 compatible
Sent from my HTC One XL using XDA Premium 4 mobile app

CM10.2 is definitely compatible with the 2.15 firmware package, the bootloop was likely caused by the current bugs with the ROM itself.
Sent from my Evita

timmaaa said:
CM10.2 is definitely compatible with the 2.15 firmware package, the bootloop was likely caused by the current bugs with the ROM itself.
Sent from my Evita
Click to expand...
Click to collapse
4.3 just wasn't a good run for aosp
Sent from my HTC One XL using XDA Premium 4 mobile app

Help i killed my Phone:D

I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: *************
imei: **************
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s

Jojo1992 said:
I was on Maximus HD 10.0
Then i tried another rom. but i don't like, so i downloaded 10.2 latest nightly but it on my internal storage-->full wipe-->and then i can't install cm10.2 then i want to but another rom on my internal storage but i can't put anything on the phone without an running rom...
then i changed my recovery to CWM 6. cause i knower there was an option to mount usb storage, but it don't work nothings happened when i click on it. Pleas help me i can do nothing
Some more Infos:C:\test>fastboot getvar all
version: 0.5
version-bootloader: 2.16.0000
version-baseband: 1.20.50.05.16
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-OFF
serialno: SH26RW404047
imei: 359901049107937
product: vle
platform: HBOOT-8960
modelid: PJ4010000
cidnum: 11111111
battery-status: good
battery-voltage: 4128mV
partition-layout: Generic
security: off
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4958290506
hbootpreupdate: 11
gencheckpt: 0
all: Done!
finished. total time: 0.078s
Click to expand...
Click to collapse
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.

Jojo1992 said:
I hope this Infos can help to solve my Problem, i have access via Fastboot!
The best would be if i can go back to stock.
Click to expand...
Click to collapse
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7

tivofool said:
You need the old firmware like you had before you updated to Maximus.
Run a RUU.exe and clear storage/factory reset in bootloader when you have the stock recovery back on.
From your other thread I posted more details
http://forum.xda-developers.com/showpost.php?p=47586067&postcount=7
Click to expand...
Click to collapse
i downloaded an RUU:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
then i make this:
fastboot devices
fastboot oem lock
then start RUU, but error no connection to device but in cmd i get a connection

I have a CID 111111 is that the Problem?

Jojo1992 said:
I have a CID 111111 is that the Problem?
Click to expand...
Click to collapse
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.

tivofool said:
I've never changed my CID, no need to. So I'm not an expert.
But from what I have read here:
"You can use any ruu while s-OFF, just simply plug phone to computer and run ruu. No need to relock bootloader.
For the supercid, it is recommended to change it back to original with fastboot command.
Fastboot oem write cid xxxxxxxx.
There has been a few bricks takin Jb ota while still supercid. "
So, not a problem, unless you install a OTA (over the air) update while SuperCid.
Here's a good guide from another forum
http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html
Glancing at that, I noticed it recommends running the RUU on the PC as administrator, maybe it's something simple like that.
Click to expand...
Click to collapse
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?

Jojo1992 said:
I changed my CID back to HTC__102
and tried zwo different RUU.exe one ICS on JB but both have an error...
i relocked my boot loader how can i unlock again?
Click to expand...
Click to collapse
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151

tivofool said:
When trying the RUU did you go to bootloader (fastboot USB)?
To Unlock
Locate your Unlock_code.bin on your pc, probably saved it somewhere or it is still in your fastboot folder.
Type this into your command prompt window fastboot flash unlocktoken Unlock_code.bin
or go through the process of getting a new one http://forum.xda-developers.com/showthread.php?t=1583427
Nice tool (Windroid)
http://forum.xda-developers.com/showthread.php?t=2471151
Click to expand...
Click to collapse
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again

Jojo1992 said:
Yes I was in fast boot USB
I will try it one time again and when it don't work then unlock again
Click to expand...
Click to collapse
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.

tivofool said:
Oh yeah, I've also read from someone that they got error 155 then they flashed stock recovery and relocked bootloader and then RUU proceeded to work.
Click to expand...
Click to collapse
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5

Jojo1992 said:
I unlocked and now i could flash:
RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed
that worked for me.
So which is the latest CM what i could install now?
Hboot: 1.14.0002
UNLOCKED
S-OFF
Running:
Android 4.0.4 HTC Sense4.1 Softwarenumber:2.31.401.5
Click to expand...
Click to collapse
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755

tivofool said:
Glad you were able to get the RUU working. But right now you won't be able to flash many ROMs with that low of a Hboot. You will need to update the firmware.
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
Or...this firmware update thread
http://forum.xda-developers.com/showthread.php?t=2322755
Click to expand...
Click to collapse
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???

Jojo1992 said:
where can i find stock recovery?
flash it like this or?: fastboot flash recovery recover.img
and relock bootloader with: fastboot oem lock ???
Click to expand...
Click to collapse
There is a stock recovery here
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
The SECOND download is the stock one
Unless you change the name of the recovery the command will probably look more like this:
fastboot flash recovery ville_recovery_signed.img
And yes
fastboot oem lock
after you have flashed the stock recovery of course

tivofool said:
Since you put your CID back, you would have to put back stock recovery and relock bootloader. Then you could go through settings and do the OTA to update to 2.15 hboot.
[/url]
Click to expand...
Click to collapse
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5

tominozh said:
Or he could just change cid to HTC__001 and flash jb ruu. (The European version)
Sent from HTC One S using android 4.2.2 sense 5
Click to expand...
Click to collapse
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?

Jojo1992 said:
That don't work
I tried:
RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4
I will try it over ota now --> my Handy ist loading the update 4.1.1 i will report as soon as it is ready
Ok edit:
Hboot 2.15.0000
Unlocked
can i now flash CM10.2?
O.T.: Is CM10.2 running stable?
Click to expand...
Click to collapse
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895

tivofool said:
Eh.. It is stable besides for some bootlooping. Like you start it up and it bootloops a few times before finally loading. I like the Avatar Rom which is CM 10.2 based, and noticed a little bootlooping. But it wasn't terrible, just something that happened a few times.
So if that doesn't bother you, go for it. Other than that you would need to stick with sense based roms for stability.
Gosh, so many to choose from you will have to try some out.
http://forum.xda-developers.com/showthread.php?t=2243895
Click to expand...
Click to collapse
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan

Jojo1992 said:
Is the Avatar Rom really 10.2 based? cause on their page they tell 10.1 based or?
but i can install now any rom or?
with the flashed rue which i have actually i don't get mobile internet working. just wlan
Click to expand...
Click to collapse
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)

tivofool said:
Ya, guess you are right, 10.1
You can flash any as long as they don't require hboot 2.16 (which they state in the first page OP)
Click to expand...
Click to collapse
ok thank you very much for the help!