Related
Update - 2/21/2011
If you have bricked an HTC EVO this will likely NOT work for you and this is the wrong info to be reading. I have gotten a few emails from this link about EVO 110 errors.
12/26/2010 - This thread is super old now:
If you ran the 1.56 RUU and your phone no longer turns on visit htc.com, go to support, choose Hero (Sprint) and download the 2.1 system update.
Remove battery from your phone and start it up again, then run the exe file that you just downloaded -
http://member.america.htc.com/downlo...2.27.651.6.exe
------All the info below is kept for reference -------
(As of 3/31/2010 - I am 10 for 10 for getting these back and working!! 3/3 of going back to 100% stock)
Edit: I have no longer kept track... its been over a month and I know personally I've done about 15 more of these... with about half being return to stock.
If you need to contact me, PLEASE EMAIL instead of using private messages, it'll probably turn into a google talk chat anyways, so add me on there, [email protected] (Its just easier than having to log in here and reply to private messages, since I get emails on the go as well.)
So you just ran the 1.56 RUU and got a 110 error. Now your screen turns on and stays black and if you plug the phone into USB you see the HTC logo. Unplug it and see the RUU menu.
Like you, I decided to attempt to roll back using the RUU 1.56. I was hit with the 110 error, and nothing but fastboot would work, I was able to launch ./fastboot-mac oem boot to get into the system.
I tried ./fastboot-mac boot image/bootname.img and a billion other things like everyone else who is having the issue, but just like them I had no success. In the second post below are the steps to resolve this issue. This will either take you to your first Nandroid backup or to whatever ROM you choose to flash once you get recovery back. I have not found a way to get back to 100% stock, but at least your phone wont be a brick.
EDIT:As of 3/30/2010 @ 8:30 PM I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. See Post number 2 for the right way to do this.?
I've helped a few people over log me in now.
I'm willing to continue doing this but it is cutting into my family time, I will do this for a "respectable" amount of money.
Feel like I've helped you??
Buy me some coffee!
(Zip attached includes fix and stock folders. Use the fix folder FIRST to get completely booted. You can use the stock folder if you want to get 100% stock after you have a running unrooted system but have RA recovery.)
Steps to resolve:
(You SHOULD have a Nandroid backup of some sort, if not download a ROM... Fresh1.1??)
1) Boot the phone to black screen
2) Plug phone into PC/MAC - The HTC logo should appear at this point
---- If you've been doing anything else, rerun the RUU and let it fail and reboot to the HTC logo.
3) PC - fastboot oem boot | MAC - ./fastboot oem boot
(Make sure you turn on USB Debugging under Settings --> Applications --> Developer)
4) Root your phone using asroot2
Code:
adb push asroot2 /data/local/
adb shell chmod 0755 /data/local/asroot2
adb shell
/data/local/asroot2 /system/bin/sh
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
cd /system/bin
cat sh > su
chmod 4775 su
5) This is where your Nandroid backup comes into play.
(Browse to your nandroid folder, find your first backup and copy all of the .img files except system and cache to your SD card root directory)
NOTE: At this point you should dismount the SD card if you mounted inside of Android OS(Sense/Launcher)
6) run adb shell (PC - adb shell | Mac - ./adb shell)
7) type su
8) Run the following commands (if you get out of memory errors, type su again and try once more)
NOTE: Do not copy the "#"'s in the commands, the # just means you are running as SU, as opposed to the "$"
Code:
# flash_image recovery /sdcard/recovery.img
# flash_image boot /sdcard/boot.img
# flash_image misc /sdcard/misc.img
9) now... type reboot recovery
This time you should get your recovery menu, should have been RA or whatever you used... from there I did a complete nandroid restore and my system booted.
Also, after I did this I did try to let it boot without doing a recovery and it wouldnt go anywhere... but I'm fairly impatient... it may have wanted to load. I figured it best to do an entire Nandroid restore though.
-------------------------------------------------------------
100% Stock Configuration Work Around
-------------------------------------------------------------
Non-Rooted Nandroid Backup:
nandroid.7z
I was able to get my phone completely 100% to stock. I was able to do this by retrieving a Nandroid restore from someone who used flashrec to make their initial backup. This restore does not touch the recovery image but I was able to boot into my recovery then write the HTC recovery back on top of it. I now have 100% un-rooted phone. I'm not sure how to go about posting a 127MB file, what do you think it the best place?
After restoring the Nandroid backup I tried this:
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
$ su
su: permission denied
Then I rebooted to recovery (I used RA 1.5.2)
Code:
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb remount
remount succeeded
Dustan-Bonneys-MacBook:tools dustanbonney$ ./adb shell
/ # mount -a
mount: mounting /dev/block/mmcblk0p2 on /system/sd failed: No such file or directory
/ # cd /sdcard
/sdcard # flash_image recovery /sdcard/Stock/recovery.img
flashing recovery from /sdcard/Stock/recovery.img
/sdcard # reboot recovery
I was booted to the Triangle and exclamation mark... I pulled the battery and booted up normally.
Stock Kernel - 2.6.27-533ce29d [email protected] )
Stock Build - 1.56.651.2 CL85027 release-keys
Other things that should be mentioned:
If you used RA 1.6.2 - I was unable to get my boot.img or the stock boot.img from the RUU's rom.zip to flash back to the recovery partition. I had to use the RA 1.6.2.img and "flash_image recovery /sdcard/recoverynamegoeshere.img"
It seems that if you've flashed the radio update, the RUU does not write the radio back successfully. Others have had issues going back to the stock radio using the upgrade.zip option as well.
I attempted to use the boot.img, recovery.img, from the RUU's rom.zip with no success. I might try it again. I was able to get to stock recovery (Triangle and exclamation) and to the Hboot menu... but from hboot I had to run the RUU and rebrick the device cause I couldnt get anything at that point, even fastboot oem boot wouldnt load.
There have been times when I get weird issues writing the flash recovery, boot, or misc and when you reboot and load "fastboot oem boot" it wont look like it goes anywhere.... check "adb devices" and your device should be listed. From there do an "adb remount" and then "adb shell" and reflash once more and then "reboot recovery".
If all else fails, I'm available for a small fee.
[email protected]
Anxiously waiting your news. Just encountered this problem today.
Updated ...
imekul said:
Anxiously waiting your news. Just encountered this problem today.
Click to expand...
Click to collapse
Wow! If you've fixed this, I think you're everyone's hero now. We won't have to worry about using the RUU now
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
I attempted flashing a new recovery image this way with no avail... I also attempted only
Code:
flash_image recovery /sdcard/recovery.img
and still was unable to boot the phone into recovery. I think it had to have been something with doing boot.img and recovery.img at the same time... I dont know what the misc.img does and I'm assuming data.img is userdata... but I did them all and then it worked...
Other users also tried flashrec and with no success... right track though.
chavo2005 said:
I was going to try something similar to this today, but i was unable to brick my phone using the 1.56.651.2 RUU. I was running Flipz updated radio and DamageControl v2.0r2.. The RUU completed successfully..
I was reading over the forum post in http://forum.xda-developers.com/showthread.php?t=645002 and i read that you could boot the system using the command 'fastboot oem boot' I was going to try to use FlashRec to do the work of Flashing the recovery, then booting into recovery and use nandroid.. but you beat me to it! Good work!
Click to expand...
Click to collapse
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
blankd3ckskat3r said:
What do u mean by 3) PC - fastboot oem boot | MAC - oem boot?
Click to expand...
Click to collapse
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
This!
Thanks Regaw
regaw_leinad said:
if your using a pc type fastboot oem boot
if your using a mac type ./fastboot oem boot
Click to expand...
Click to collapse
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
If you get errors like...
adb shell
su
flash_image recovery .........
(out of memory... etc)
Then...
just su again... so you really su twice
its what I had to do.
imekul said:
Trying this right now.
So far, am getting lots of "mtd: write error" and "mtd: re-read error" Out of memory errors for flashing the recovery image. Guess I'll give this some time, and try to su again and reflash? Or should I kill it as soon as the Out of memory errors pop up and try again?
Click to expand...
Click to collapse
Trying it a second time, and so far am getting a bunch of Out of memory errors. After the first one "finished," I did as you recommended and typed "su" a second time, and then typed the "flash_image recovery /sdcard/recovery.img" command.
So far, looks like it's giving the same errors the second time around.
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
If you're willing to allow something like logmein.com or some way for me to remote assist you, I would like to try. [email protected] if you're in.
imekul said:
This second attempt, it ended with "error writing recovery: No space left on device."
Just to be sure, I checked the SD card, and that has over 1 GB of free space.
Click to expand...
Click to collapse
Sounds awesome. Thanks. I'll e-mail you now.
Dun Dun Dun... The results are in!
imekul said:
Sounds awesome. Thanks. I'll e-mail you now.
Click to expand...
Click to collapse
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
imekul said:
dfbonney is the man!!
After a friendly little session on LogMeIn Express, I am good as new! How awesome!!
Click to expand...
Click to collapse
We ended up just needing to run
Code:
adb shell
reboot
fastboot oem boot
adb shell
su
//flash commands here
that seemed to do it. so make sure if you're having issues to restart the device and try again!
Edit: Also, we didnt get data.img to work so we only did boot, recovery, and misc.img's
This guide was taken from AndroidCentral and I thought I would share it here because it's taken me 4 hours this morning to figure out why I was having so many problems trying to flash a recovery image when I know my phone was rooted and flashed in order to get 2.1 a month or so ago. I have been searching these forums and google and hope anyone else who has my issue finds this post.
1. Make sure you have the Android SDK installed.
2. Download flash_image.zip
3. Download recovery-RA-heroc-v1.5.2.img
4. Unzip the first file, and place both in your Android SDK/tools folder.
5. Make sure USB debugging is ON
6. Connect your phone to the PC
7. Open the command window and navigate to the Android-sdk/tools folder on your computer.
8. At the prompt enter the following, one line at a time followed by enter
Code:
adb shell
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock3 /system
exit
exit
adb push flash_image /system/bin
adb push recovery-RA-heroc-v1.5.2.img /sdcard
adb shell
chmod 0755 /system/bin/flash_image
reboot
9. Your phone will reboot. When it is finished, back at your command window, once again enter
Code:
adb shell
su
cd /sdcard
flash_image recovery recovery-RA-heroc-v1.5.2.img
reboot recovery
10. With any luck, you'll have the recovery image back and can load custom 2.1 based ROMS again.
Hope this helps. All credit goes to gbhil at Android Central.
You might want to change the title of the post. People might get confused thinking you found a way to downgrade the hboot and not how to flash the recovery image.
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
This won't work for the leak that was put out today. You lost root. This process requires root.
bubbacs1 said:
Can't get it to work.
I ran the RUU earlier.
Tried to root the old way.......didn't work.
Just tried this to get the recovery image back.
At the SU command it says: permission denied
Thanks,
Bubba.
Click to expand...
Click to collapse
If you used the new RUU that was leaked today you're screwed. The older 2.1 leaks were test ROMs that were already rooted so you could use the instructions above to flash the RECOVERY. Notice recovery in bold, not bootloader. Once hboot is updated there is no known way to downgrade so you could use an older RUU file.
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
So they can't run an older ruu with 1.5?
HeroMeng said:
This rom has no root. There is NO WAY to re-root after flashing the newest RUU. I'm sorry to say... you're ****ed.
Click to expand...
Click to collapse
To clear that up, if you run the RUU you have no root. If you extract the ROM, set it up, and flash it, you will preserve root, just like damageless made for all of us. But, yeah, you are not gonna be able to get back from this one. at least until someone figures it out.
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
celemew2 said:
I changed the thread title to hopefully alleviate some confusion. I didn't realize there was a newer RUU released.
I flashed the Damageless Rom and it's running smoothly so far, but I'm still trying to figure out why wifi tethering isn't working out for me. :-(
Click to expand...
Click to collapse
Did you get wifi tether version 1_60? That's the only version that ever worked for me.
Yeah, I have 1.60 installed on my phone right now, but when I try to start tethering, a SU Request black screen comes up and nothing happens until I get an error, "Activity SU Request (in application Superuser Permissions) is not responding."
I'm sure there's an answer somewhere, but lately I haven't been having luck searching for it.
Edit:
Thank you 98classic! All I had to do was enable USB Debugging. (I had it turned off cause I didn't like the warning up top when my phone was plugged into the computer)
"flash_image not found" what the f**k
need the binary? physically check its there with a root explorer
Sent from my broken Typewriter!!!
or do this download and set up the android SDK it itself includes the flash_image binary. after that u will need to open a command prompt on your computer u will have to change directory to platform tools
cd /path/to/platform-tools
after that u will get the chance to do
flash_image recovery /path/to/recovery.img
that will flash the recovery
now reboot into recovery
Typed from my broken Typewriter!!!
Axioo PICOPAD QGN
Android OS, v2.2 Frozen Yogurt
Qualcomm MSM7227 (App: ARM11 600MHz)
This wont work on PICOPAD 9
This is a very unpopular device from Indonesia. Although it is very easy to Root using "Superoneclick". As more people got hold of this free set(via Singapore old Starhub Internet plans), more people are also starting to ask about the steps on rooting this device. I thought I should start a guide here where I've followed from different places, piece them together here.
Feel free to comment and share if there are other ways to root, flash and install custom roms or android version. More importantly over clocked kernels. (remember seeing a link at kwbr's thread)
There are similar sets "CSL Spice Mi700 DroidPad", "Viewpad 7", etc
Alternatively you could research more by heading on to Viewpad 7's thread as I found out that device is very much similar and more developers are active there. I've also tried flashing kwbr's rom and it works for me.
Well if you are going to follow this thread to root, then read on...
WARNING! You warranty is now VOID & I will not be responsible if you brick your device.
Click to expand...
Click to collapse
Sections:
1. Rooting your device (wiki)
2. Installing Clockwork recovery (wiki)
3. Setting up ADB (optional)
4. Setting up partition on SDcard to free up device main space (WIP)
1. ROOT & Busybox (comes in a package)
Use these steps to root with "SuperOneClick". (Thanks to SuperOneClick)
Download and install "SuperOneClick"
Alternatively, download older version (some say works better) 1.6.5 1.7.0
Make sure you have .NET Framework v2.0 for Windows XP(win update)
On picopad, Unmount your SD card. From settings -> sd card -> unmount
Enable USB debugging, Setting -> Applications -> Development -> tick USB Debugging
Connect picopad to Pc via usb, ignore pctools if popup.
Goto Windows Explorer, Picopad will appear as "CD-ROM", explore CD-ROM and run SETUP.exe, ignore pctools
Open "SuperOneClick"
Change the option from "psneute" to "rageagainstthecage"
Click Root.
Rooted , Superuser & Busybox installed
Mount back your SDcard if u wish and reboot your device at least twice.
Congrats! Your device is rooted!
If you are satisfy with only root and superuser access, then you can stop here.
If you would like to install(flash) Clockworkmod recovery so you can backup your device(nandroid) and flash rom/kernel/stuff easier, proceed to step 2. (Highly Recommended)
If you want to set up ADB proceed to step 3 (optional, may come in handy and good for other android devices.)
2. ClockworkMod Recovery 5.0.2.6
2a. Preparing to installing CWR
Download CWR 5.0.2.6 and Flash_Image
Unzip, then copy "flash_image" and "cwm5026.img" to the root of your sdcard. (if you don't know how.. take your SDcard out and use a card reader)
Power on the device and install a terminal app so you could type commands in, try Android Terminal or Terminal Emulator
Once installed, open the app and start typing:
Gain superuser access type
su (once in superuser, you will see "#")
Click to expand...
Click to collapse
copy flash_image to system/bin
cp /sdcard/flash_image /system/bin
Click to expand...
Click to collapse
Install the flash_image
chmod 755 /system/bin/flash_image
Click to expand...
Click to collapse
Backup your original Recovery
cat /dev/mtd/mtd3 > /sdcard/orirecovery.img
Click to expand...
Click to collapse
And if you ever want to restore back for warranty issues
flash_image recovery /sdcard/orirecovery.img
Click to expand...
Click to collapse
2b installing ClockworkMod Recovery 5.0.2.6
The previous ver 2XXX is pretty outdated, thanks to mb-14 for sharing 5026.
Now you are ready to flash ClockworkMod Recovery
Assuming the file name that you download from CWR is "cwm5026.img" Type
flash_image recovery /sdcard/cwm5026.img
Click to expand...
Click to collapse
Done!
Now to run Clockwork Recovery:
First, turn off your device.
Now, hold down both volume button and press the power button at the same time, when you see recover on the corner of the screen, you can let go as you will boot up in Clockworkmod Recovery.
How to use 5.0.2.6 CWR?
Use the device vol+ and [/b]vol- to move up and down or the soft keys menu for "down", home for "up"
Select options by pressing the power button or , use the soft keys search for "enter"
back is for "back".
When you load into CWR, you could do many stuff, some simple info on the main options,
Wiping data is resetting your device to factory default, but CWR remains as long as you do not flash a stock recovery or a rom with a different recovery inside.
You could do stuff like formatting and partitioning SDcard to prepare for Apps to be install in SDcard to save space in device. Other than that, you could do a Backup for your entire device which is also known as nandroid backup, but it doesn't backup the bootloader and radio, so take note if you are going to flash custom radio or bootloader.
If you have a backup, you could restore back to that backup, this is good if you accidentally flash something bad or dislike a rom
Fixing permission is good if you always have FC.
You can mount SDcard to your pc from here and manage files with from your PC.
You could use ADB to push / pull files in and out of your device from PC.
you could install other roms, kernel and files using the "install zip" option.
If you want to set up ADB proceed to step 3 (optional, may come in handy and good for other android devices.)
3. Installing ADB on your windows
Download and install Latest JAVA SE Development kit "JDK" and Android SDK.
Follow the steps here on installing ADB, Android Debug Bridge.
3a. SET PATH for ADB: Check if you had set the path to sdk platform tools folder, this is to run adb command from any path. Steps for Windows XP:
Right-click ‘My Computer’ and click ‘Properties’.
In the ‘System Properties’ window, click the ‘Environment Variables’ button on the ‘Advanced’ tab.
Find ‘Path’ in the ‘System variables’ section and double-click it to edit it.
Make sure NOT to delete the existing entry in ‘Variable value’.
Just add the following string to the end of it, including the semi-colons:
;c:\android-sdk-windows\tools;c:\android-sdk-windows\platform-tools;C:\Program Files\Android\android-sdk-windows\platform-tools
Click to expand...
Click to collapse
Start ADB shell to command picopad from your pc:
Make sure Picopad is connected to pc via USB and sdcard is mounted.
From PC, Goto command prompt (Start -> Run type "CMD")
Type "ADB devices" from command prompt ( to see if path is set and picopad is connected, you should see 1 device attached, not more, not less)
C:\Documents and Settings\tish>adb devices
List of devices attached
FM88888888888 device
Click to expand...
Click to collapse
Troubleshooting:
If you can't get the adb command to work, probably you didn't set the path correctly, refer back to SET PATH or go to your adb actual folder to type the command which should be here C:\android-sdk-windows\platform-tools\
3b. Using ADB
At recovery or booted up device, on Pc Type:
adb shell (you will see "$")
Click to expand...
Click to collapse
now access superuser type
su (allow superuser access from Picopad and you will see "#")
Click to expand...
Click to collapse
Here you can copy files using (push/pull), I recommend you google for ADB commands to have a better understanding.
4. More sections to come eg: The space problem on the device, so alternative is partitioning sdcard to install apps as to free up space in device........
You could buy me a beer if you really appreciate my work here.
Updates from Fri the 21th April 2012
Reorganizing error section
Adding missed out steps here and there
Placing direct link for faster downloads
Added 2 older ver. SuperOneclick which works better
Removed CWR 2.5.1.2 details since it's outdated.
Added some details on 5.0.2.6 CWR
Updates from Fri the 13th Jan 2012
Added CWM 5.0.2.6 and soft keys steps.
Added possibility to explore Viewpad 7's dev forum.
Included some wiki info on root and CWR(Clockworkmod Recover)
Added troubleshoot for Set path to android sdk adb folder.
Included ADB set and using step
I first rooted my Picopad using guides from hucqim80, however they are not meant for Picopad and I've gather the info and posted them here.
Original recovery image provided by jax79sg here
This is to recover original recovery and replace clockworkmod recover.
This step is done because you need to send your set for warranty repair probably.
Remember to do a factory reset first before replace with original recover.
tishfire said:
Wonder if anyone had backup their Picopad's original recovery? "orirecovery.img" Accidentally erased mine thinking I had already backup in my pc.
Hope you could put up for me to download thanks .
Click to expand...
Click to collapse
I will upload mine somewhere after i try your steps above.
sure, thanks
axioo picopad.
Hi tishfire , thanks for the guide, i got the same device as yours but when it always stuck at the below lines , can anyone help ? thanks in advance.
[/I]Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing psneuter...
677 KB/s (585731 bytes in 0.843s)
OK
chmod psneuter...
OK
Running psneuter...[/I]
did u go to cd-rom folder and execute setup.exe before u click superoneclick?
No , I did not run the setup.exe from the cdrom drive cos when i plugin the device it automatically ask me to do the PC syncing. Actually i tried that before but that din work either.
I ran both PC running win7 and winXP, both also stuck at Running psneuter ...
Hi,
I ran into this error which puzzles me greatly.
# flash_image recovery /sdcard/cwrecovery.img
flash_image recovery /sdcard/cwrecovery.img
flash_image: permission denied
Do you know how to resolve this?
Thanks in advance.
Warmest Regards
eagleen said:
Hi tishfire , thanks for the guide, i got the same device as yours but when it always stuck at the below lines , can anyone help ? thanks in advance.
[/I]Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing psneuter...
677 KB/s (585731 bytes in 0.843s)
OK
chmod psneuter...
OK
Running psneuter...[/I]
Click to expand...
Click to collapse
same with me....anybody can give another tips ?
try to turn on picopad usb first. then try to ru he setup in picopad identified as " cd-rom" try again
Sent via Picopad
is there any custom ROM compatible for this device ?
help
Please help me when i type cp /sdcard/flash_image /system/bin and press enter i got something like this : cp /sdcard/flash_image /system/bin: not found
I'm a wrong.?
can this Stock ROM modified for support with App2sd by Trkton ?
Vuska said:
can this Stock ROM modified for support with App2sd by Trkton ?
Click to expand...
Click to collapse
It supports without any modification in the first place.
Roms, probably the MI700's custom rom will work, get to hucqim80's signature, the link is there.
nhasir said:
Please help me when i type cp /sdcard/flash_image /system/bin and press enter i got something like this : cp /sdcard/flash_image /system/bin: not found
I'm a wrong.?
Click to expand...
Click to collapse
probably ur file is not in that directory for this error message to appear.
eagleen said:
Hi tishfire , thanks for the guide, i got the same device as yours but when it always stuck at the below lines , can anyone help ? thanks in advance.
[/I]Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing psneuter...
677 KB/s (585731 bytes in 0.843s)
OK
chmod psneuter...
OK
Running psneuter...[/I]
Click to expand...
Click to collapse
Okay, i know your problem... just change the option in superoneclick from psneuter to rageagainstthecage... and then root it...
when the superoneclick start to not responding, just re root it using the same method....
then to enable your superuser, install z4root to your device
I managed to root the picopad and flashed as stated.
When i boot up pressing both power and vol button, i was brought into this FTM mode. And from there i can't do anything...... the screen looks as follows.
Hmm....the cwrecovery didn't get flashed?
SWVer=3.240
MODEL: FM6-0001
HWVer:106
Power on with pressing VOLUME_DOWN keys to leave Auto FTM.
[Resolved]
Try holding both up and down volume buttons instead of just one of them
tishfire said:
Wonder if anyone had backup their Picopad's original recovery? "orirecovery.img" Accidentally erased mine thinking I had already backup in my pc.
Hope you could put up for me to download thanks .
Click to expand...
Click to collapse
This is many months late, here's the stuff if anyone needs it.
http://www.megaupload.com/?d=PKMW1ODU
jax79sg said:
This is many months late, here's the stuff if anyone needs it.
http://www.megaupload.com/?d=PKMW1ODU
Click to expand...
Click to collapse
Im still using my picopad.
Thanks!
Sent from my Nexus S using XDA App
can anyone help me with original backup for the splash and welcome screen axioo pico pad?
my pico pad splash and welcome screen change to viewsonic because i install viewpad 7 ROM in to my pico pad.....
somebody....help me please !!!
thankyou
UPDATED as of 18 DEC 2012 clarified and fixed some things..
Worldwide disclaimer not held responsible if something went wrong blah blah blah goes here..
Click to expand...
Click to collapse
THIS GUIDE WILL VOID YOUR WARRANTY BECAUSE OF THE HTC-DEV UNLOCK METHOD!!! And you can only use this guide if you are on HBOOT v2.xx
Click to expand...
Click to collapse
This guide may also be used for DEBRANDING your phone..
Click to expand...
Click to collapse
Check my sig first, then these for proper and additional information:
[GUIDE] Possible FIX for the infamous eMMC problem..
[Q] Bricked my phone?
NOTE:
RUUs with v1.xxx have HBOOTs with v0.98.000, while v2.xxx have HBOOTs with 2.00.002, and the ICS RUU has the only HBOOT v2.02.002
Click to expand...
Click to collapse
I will not supply the necessary files that is needed, you MUST know how to use SEARCH. I also suggest to give THANKS to those who originally made/uploaded the files.
Requirements:
Common Sense
- it helps A LOT
HTC Sync for Desire S - Installed
- for its drivers and such, or you may just install the "naked" drivers
Android Windows Tools - Installed
- for adb, fastboot commands
HTC-Dev unlocked
- to change recovery and ROM
Custom recovery
- to flash Root Access
SuperSU or SuperUser flashable zip
- to have Root Access
Root Access
- to change phone version
misc_version file (attached)
- file needed to change phone version
GoldCard
- to flash any version of RUUs
RUU executable file
- to DOWN/UPgrade
Click to expand...
Click to collapse
Quick tip:
Copy-Paste the cmd codes for you to not have any problem. 1 typo error (extra digit on misc_version) will render your phone unable to RUU.
Click to expand...
Click to collapse
Preparations
a. Create a folder "downsaga" on your C:
b. Copy misc_version, recovery.img(custom) on that folder.
c. Copy SuperSU's or SuperUser's flashable zip to your SD card.
Click to expand...
Click to collapse
Creating a Gold Card (use below or attn1's GoldCard Method)
a. Install Goldcard Helper from the market on your phone
b. Run it and copy the CID for MMC2, or email the info to yours
c. This number has already been reversed so go to http://psas.revskills.de/?q=goldcard, fill out the required fields.
d. Download the image file that was emailed to you.
e. Connect phone as a "Disk drive" using USB cable.
f. Use Gold Card Tool to flash your image file to your phone's SD card. (you might need to reformat it first with Panasonic's SD Formatter)
g. Disconnect safely from the PC.
NOTE:Your sd card is now a GoldCard unless you reformat it again. You should now be able to RUU to any version you would like given that the bootloader is LOCKED.
Click to expand...
Click to collapse
Unlocking the bootloader
a. Go to htcdev.com/bootloader
b. Proceed and follow every step on the guide
c. You just need to install Android Windows Tools files for it. No need to download the SDK and JAVA.
d. Once done, boot on bootloader and you should be able to notice if its UNLOCKED.
Click to expand...
Click to collapse
Flashing Custom Recovery
a. The phone must be on bootloader, then go to fastboot
b. Open up command prompt then type:
Code:
fastboot flash recovery C:\downsaga\recovery.img
fastboot reboot-bootloader
d. Access recovery
Click to expand...
Click to collapse
Flashing Root Access
a. Flash SuperSU or SuperUser
b. Reboot the phone normally
Click to expand...
Click to collapse
Modifying the version of your phone
a. Connect the phone using USB cable using "Charge ONLY" and USB Debugging is ON.
b. Open command prompt and input these codes:
Code:
adb push C:\downsaga\misc_version /data/local/tmp
adb shell chmod 777 /data/local/tmp/misc_version
adb shell
su
cd /data/local/tmp
./misc_version -s 1.27.405.6
exit
adb reboot-bootloader
c. Your phone should now be read as the version you've placed there (but not visible to settings)
Click to expand...
Click to collapse
Locking the bootloader
a. You should be on fastboot
c. In cmd use this command to lock the bootloader:
Code:
fastboot oem lock
c. You might receive an error message on your CMD but don't mind it. The phone should restart itself automatically on bootloader, and you should be able to notice at the top saying "***RE-LOCKED***", and might also has *Security Warning*. Just ignore.
Click to expand...
Click to collapse
Downgrading
a. Make sure you are still on fastboot with the above message.
b. Open the RUU that you've chosen to install on your phone
c. The RUU must detect your phone version as 1.27.405.6
d. If you have received errors, then you've done something wrong. Review everything that you've done and check the guide again.
Click to expand...
Click to collapse
If everything went well, you should have successfully downgraded your phone and your HBOOT.
Hey man it seems you did it! So HTC official unlocker can be handy after all.
Great job! I assume that now you will use Revolutionary to gain S-OFF and back to flashing?
amidabuddha said:
Hey man it seems you did it! So HTC official unlocker can be handy after all.
Great job! I assume that now you will use Revolutionary to gain S-OFF and back to flashing?
Click to expand...
Click to collapse
yes sir'ree!
And howto flash your hboot in recoverymode
Use flash_image to flash your hboot to older version.
flash_image /dev/block/mmcblk0p18 )(path to an older hboot file)
NikMel said:
Use flash_image to flash your hboot to older version.
flash_image /dev/block/mmcblk0p18 )(path to an older hboot file)
Click to expand...
Click to collapse
You wouldn't be able to do that on an official, latest S-ON HBOOT. I have already tried that but will just give you an INFOsignature error.
Skanob said:
Step 1: Creating a Gold Card
a. Install Goldcard Helper from the market
b. Run it and copy the CID for MMC2, or email the info to yours
c. This number has already been reversed so go to http://psas.revskills.de/?q=goldcard, fill out the required fields.
d. Download the image file that was emailed to you.
e. Connect phone as a "Disk drive" using USB cable.
f. Use Gold Card Tool to flash your image file to your phone's SD card. (you might need to reformat it first with Panasonic's SD Formatter and then format it with the Gold Card Tool again)
g. Disconnect safely from the PC, and disconnect the cable.
Click to expand...
Click to collapse
Why would you use such an obsolete method to make a gold card?
after temproot,
windows batch script ( example filename: gc.cmd ):
Code:
adb push goldcard /data/local/tmp/
adb shell chmod 777 /data/local/tmp/goldcard
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid > tcid
set/p cid= < tcid
del tcid
adb shell /data/local/tmp/goldcard -c %cid% -o /data/local/tmp/goldcard.img
adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
Linux shell script (example filename: gc.sh ):
Code:
adb push goldcard /data/local/tmp/
adb shell chmod 777 /data/local/tmp/goldcard
cid=`adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid`
adb shell /data/local/tmp/goldcard -c $cid -o /data/local/tmp/goldcard.img
adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
get the android goldcard binary here:
Thanks to Revskills for the algorythm and to GenePoole for the Android binary.
With this, the entire process can be scripted.
Skanob said:
You wouldn't be able to do that on an official, latest S-ON HBOOT. I have already tried that but will just give you an INFOsignature error.
Click to expand...
Click to collapse
You can do that in recoverymode within adb shell #
I use 4ext recoverymode
attn1 said:
Why would you use such an obsolete method to make a gold card?
after temproot,
windows batch:
Code:
adb push goldcard /data/local/tmp/
adb shell chmod 777 /data/local/tmp/goldcard
adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid > tcid
set/p cid= < tcid
del tcid
adb shell /data/local/tmp/goldcard -c %cid% -o /data/local/tmp/goldcard.img
adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
Linux Shell:
Code:
adb push goldcard /data/local/tmp/
adb shell chmod 777 /data/local/tmp/goldcard
cid=`adb shell cat /sys/class/mmc_host/mmc2/mmc2:*/cid`
adb shell /data/local/tmp/goldcard -c $cid -o /data/local/tmp/goldcard.img
adb shell dd if=/data/local/tmp/goldcard.img of=/dev/block/mmcblk1
get the android goldcard binary here:
Thanks to Revskills for the algorythm and to GenePoole for the Android binary.
With this, the entire process can be scripted.
Click to expand...
Click to collapse
well, that obsolete-method for me is a hell-of-a-lot easier and noob-proof. no code needed. and also leaves you a copy of your goldcard.img
NikMel said:
You can do that in recoverymode within adb shell #
I use 4ext recoverymode
Click to expand...
Click to collapse
That didn't worked for me. Prior to downgrading, check my sig. I'm using the official S-ON, not the ENG S-OFF leaked.
Skanob said:
well, that obsolete-method for me is a hell-of-a-lot easier and noob-proof. no code needed. and also leaves you a copy of your goldcard.img
Click to expand...
Click to collapse
No way is it easier or noob proof. When I used this method on the Ace Hack Kit goldcard errors dropped to none. Since you are already running adb commands and pushing crap to the phone, what's the big deal with this?
With this, there is no need for hacky tools, not mounting/dismounting the sdcard (risking corruption from unflushed write buffers and improper dismounts), and no need to go to the revskills website.
This runs in about a second and it's done.
attn1 said:
No way is it easier or noob proof. When I used this method on the Ace Hack Kit goldcard errors dropped to none. Since you are already running adb commands and pushing crap to the phone, what's the big deal with this?
With this, there is no need for hacky tools, not mounting/dismounting the sdcard, and no need to go to the revskills website or copy files back from email. This runs in about second and it's done.
Click to expand...
Click to collapse
I believe that that is based on your preference. Which I observed really knows a lot about adb.
And what is in the guide is based on my own preference. Which for me does not know much about adb.
They still can follow which ever method they would like.
Well, it would still give us the same result. Having a GoldCard.
Skanob said:
I believe that that is based on your preference. Which I observed really knows a lot about adb.
And what is in the guide is based on my own preference. Which for me does not know much about adb.
They still can follow which ever method they would like.
Well, it would still give us the same result. Having a GoldCard.
Click to expand...
Click to collapse
Mine is based on real results after thousands of uses of the Ace Hack Kit, which formerly did things the obsolete way.
Yours is based on preference.
But you are right, either way will result in a goldcard if executed properly.
attn1 said:
Mine is based on real results after thousands of uses of the Ace Hack Kit, which formerly did things the obsolete way.
Yours is based on preference.
But you are right, either way will result in a goldcard if executed properly.
Click to expand...
Click to collapse
yeah. I'll update the guide with your method aswell. Thanks aswell!
High five!
Skanob said:
yeah. I'll update the guide with your method aswell. Thanks aswell!
High five!
Click to expand...
Click to collapse
You're welcome.
Make a note that those are the contents of a script - .cmd or .sh.
FYI, if you try this to make the goldcard image, the one generated should match the md5 of one you got from Revskills.
Once you do it this way, you will never go back.
@Scanob
Since you change your guide in step 6 to run RUU instead of PG88IMG.zip than the Goldcard is no longer needed isn't it?
misc_version not found error....
I don't know how to find this official recovery.img. (Yes I try to find it...)
Step 4: Flashing official recovery.img
amidabuddha said:
@Scanob
Since you change your guide in step 6 to run RUU instead of PG88IMG.zip than the Goldcard is no longer needed isn't it?
Click to expand...
Click to collapse
You will still need it. Even the PG88IMG.zip method uses checks as exactly the same as doing an RUU.
hekermeker said:
misc_version not found error....
Click to expand...
Click to collapse
barthdvs said:
I don't know how to find this official recovery.img. (Yes I try to find it...)
Step 4: Flashing official recovery.img
Click to expand...
Click to collapse
Re-check the guide after a few
@barthdvs
Getting the Official files
a. Download the HTC_EUROPE_2.10.401.5 RUU file.
b. Run the file and do not close
c. Go to your temp folder on your computer and find the rom.zip file.
d. Copy it somewhere else.
e. Extract the rom.zip and you should now have the official .img files from the RUU.
f. Use the respective files needed for the guide.
or the files is here (files exrtract from HTC_EUROPE_2.10.401.5 RUU file)
Boot.img : http://www.multiupload.com/JME2WRDQEQ
recovery.img : http://www.multiupload.com/MX64VDUICI
ABOUT:
This tutorial explains how to use adb to flash the following items starting from a UCLB3 base w/ root.
- Custom kernel w/ CWM recovery
- Modified 3e recovery
- Custom firmware (ROMS)
- Busybox
These instructions will most likely work coming from other rooted Infuse firmwares, but were tested starting from my Odin UCLB3 Unbrick package with root.
ADB SETUP:
Download: adb.zip
Download: SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Setup instructions are for Windows, but adb is also available for Linux and Mac.
a.) If necessary, uninstall any previous Kies or Samsung USB Driver installations, and install the Samsung USB driver from the above download link.
b.) Unzip contents of adb.zip and copy the folder contents to C:\Windows\
c.) If your phone is booted up and running, make sure you select USB debug mode in settings. ADB also works in CWM recovery, and in modified 3e recovery.
d.) To test your installation, open a command prompt (Press WINDOWS KEY + R - type cmd - press Enter).
Type:
Code:
adb devices
If all is working, you will see your device listed.
Some quick command tips:
To move a file from your computer to the phone, "push" it:
Code:
adb push myfile.zip /directory-on-phone/
Of course, you need to be in the computer directory for your file in the command line to push it to the phone.
To get a file from your phone onto your computer, "pull" it:
Code:
adb pull /sdcard/myfile.zip
To access a command prompt for the phone:
Code:
adb shell
Inside that shell, you can use unix commands from within the Android OS to manipulate your phone.
------------------------------------------------------------
INSTRUCTIONS FOR GINGERBREAD:
(Scroll down for ICS Instructions.)
------------------------------------------------------------
Instruction steps must be followed in order.
Step 1: Use adb to install a custom kernel
Download: flash_image.zip (Extract and use flash_image for instructions below.)
You'll also need a Gingerbread kernel zImage.
Code:
adb push flash_image /data/local/tmp/flash_image
adb push zImage /data/local/tmp/zImage
adb shell
$ su
# chmod 755 /data/local/tmp/flash_image
# chmod 755 /data/local/tmp/zImage
# /data/local/tmp/flash_image boot /data/local/tmp/zImage
# reboot recovery
Step 2: Use adb to install modified 3e recovery
Necessary for Step 3.
Download: 3e_recovery_no_sig_check.zip (Extract and use recovery for instructions below.)
Code:
adb remount
adb push recovery /system/bin/recovery
adb shell "chmod 755 /system/bin/recovery"
adb reboot recovery
Step 3: Use adb to install a custom firmware
This step uses the modified 3e recovery to flash unsigned firmware.
You'll need to download the zip file for the Gingerbread (or possibly Froyo) rom that you would like to flash. These instructions have been tested by flashing my Ethereal rom.
Replace YourFirmware.zip with the actual name of your rom zip.
Code:
adb push YourFirmware.zip /sdcard/
adb remount
adb shell
# echo "boot-recovery" > /cache/recovery/command
# echo "--update_package=SDCARD:YourFirmware.zip" >> /cache/recovery/command
# reboot recovery
Let firmware flash complete, and then type:
Code:
adb reboot
EXTRA: Use adb to install busybox
Download: Busybox-1.20.2.zip (Extract and use busybox for instructions below.)
Code:
adb remount
adb push busybox /system/xbin/busybox
adb shell
# chmod 755 /system/xbin/busybox
# ln -s /system/xbin/busybox /system/bin/busybox
# /system/xbin/busybox --install -s /system/xbin
# exit
----------------------------------------
INSTRUCTIONS FOR ICS:
----------------------------------------
STEP: Use adb to flash an ICS kernel; then use blue CWM recovery to install an ICS rom.
Download: flash_image.zip (Extract and use flash_image for instructions below.)
You'll also need an ICS kernel boot.img and it is recommended that you push an ICS rom zip to your sdcard. Once you are in blue CWM recovery, you won't be able to use adb to push anything else to the device.
Replace YourFirmware.zip with the actual name of your rom zip.
Code:
adb push YourFirmware.zip /sdcard/
adb push flash_image /data/local/tmp/flash_image
adb push boot.img /data/local/tmp/boot
adb shell
$ su
# chmod 755 /data/local/tmp/flash_image
# chmod 755 /data/local/tmp/boot
# /data/local/tmp/flash_image boot /data/local/tmp/boot
# reboot recovery
From here, just follow the normal instructions for flashing your ICS rom in blue recovery.
I'll add to these instructions as I find more for ICS, and as support increases for adb in the CWM recovery we're using in ICS roms. At this time, adb support isn't fully working in Infuse ICS CWM recoveries. If you use adb to get an ICS kernel / CWM recovery combination, just use the recovery menu to do anything else. If you need to get other files onto the device while in blue CWM recovery, go to mounts and storage, mount /sdcard/, and mount USB storage.
Hope this is useful to someone else. I mainly wanted to see how much could be done with just adb, and I learned quite a bit about how the phone works in the process.
Wow my friend...nice and thx for what you provide the Infuse Community.
It is people like you, why i stay!
very nice how-to!
bigjoe2675 said:
Wow my friend...nice and thx for what you provide the Infuse Community.
It is people like you, why i stay!
Click to expand...
Click to collapse
SiL3nTKiLL said:
very nice how-to!
Click to expand...
Click to collapse
Thanks fellas. And, by the way, I know that most general users aren't going to use adb to flash kernels and firmware. It's of course easier to use all of the Heimdall one-click and Odin tools that we have - as well as the Infuse Toolkit, Heimdall suite, SGS Kernel Flasher, and CWM recovery. So, for the person asking, "Why would someone still do this, when we have all of the tools that we have?" - this isn't for you.
I approached this from the standpoint of asking, "What if we didn't have access to all of the easy tools?".
At some point, if someone is having issues with Odin and Heimdall, or if they can't use their hardware buttons, maybe they will find this useful. I like to do things from the command line and not have to touch the phone while I'm working on development stuff - plus I type fast, and since I spent years in the command line on Slackware linux, prefer using unix commands. I'm actually faster at CLI stuff than with GUI stuff, plus I like the control that CLI gives you.
I had to help a forum member restore his phone over a remote tech support session using https://join.me/ . He claimed that he couldn't get Heimdall or Odin to recognize his phone. I was able to use adb to do things from his computer, which was helpful, since I couldn't see or directly use his phone. I had to ask him to do some things on the phone, so I later wanted to figure out how to do more using just adb. That's what this is all about. If I had to help someone over a remote session now, I could do most everything without them ever touching their phone.
First of all thank you very much for the guide, but I seem to be having a problem
Whenever I try this:
Code:
adb push YourFirmware.zip /sdcard/
adb remount
adb shell
# echo "boot-recovery" > /cache/recovery/command
# echo "--update_package=SDCARD:YourFirmware.zip" >> /cache/recovery/command
# reboot recovery
the first issue is the phone reboots but continues to system and not to recovery.
now if I manually make it boot recovery, CWM gives me an error that it couldn't mount: SDCARD:update.zip
the update.zip that I'm trying to flash is CM9 RC2, also tried other zip files and also failed.
what am I doing wrong ?!
Thanks in advance.
DeepUnknown said:
First of all thank you very much for the guide, but I seem to be having a problem
Whenever I try this:
Code:
adb push YourFirmware.zip /sdcard/
adb remount
adb shell
# echo "boot-recovery" > /cache/recovery/command
# echo "--update_package=SDCARD:YourFirmware.zip" >> /cache/recovery/command
# reboot recovery
the first issue is the phone reboots but continues to system and not to recovery.
now if I manually make it boot recovery, CWM gives me an error that it couldn't mount: SDCARD:update.zip
the update.zip that I'm trying to flash is CM9 RC2, also tried other zip files and also failed.
what am I doing wrong ?!
Thanks in advance.
Click to expand...
Click to collapse
If you follow the steps correctly from Gingerbread (including the step to install modified 3e recovery), and replace "YourFirmware.zip" with the name of your firmware, these adb commands use 3e recovery to flash firmware. These flashing instructions are not for CWM recovery, and the steps you are following aren't for flashing ICS from Gingerbread. Look further down in the first post for ICS adb instructions.
Sent from my SGH-I997 using Tapatalk 2
jscott30 said:
If you follow the steps correctly from Gingerbread (including the step to install modified 3e recovery), and replace "YourFirmware.zip" with the name of your firmware, these adb commands use 3e recovery to flash firmware. These flashing instructions are not for CWM recovery, and the steps you are following aren't for flashing ICS from Gingerbread. Look further down in the first post for ICS adb instructions.
Sent from my SGH-I997 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for clearing it up. The reason why I used that method is because I looked online and I found it on another forum and the post owner didn't mention anything about it should be used with GB.
infuse CM9 rainbows
I'm caught with a half-done CM9 install of the infuse upgraded from cm7.
Somehow I was able too boot once sucessfully into CM9 though with the initial rainbow screen, but now my device hangs in recovery which is also garbled. I've been searching all over for a nice thorough guide to getting this thing going again and your post here was the only one I found remotely applicable to my situation.
I've been trying your ADB instructions for flashing with ICS but I'm stuck at second step: where I only get: cannot stat "flash-image": no such file or directory.
Since I'm stuck in CWM recovery none of the other options seems to see my device, ie. Heimdall or Odin.
Is there a better solution out of my woes?
Excuse my noobiness.
By stucked at recovery you mean it always boots up into recovery (recovery bootloop)?
You should go back to ULCB3 stock, preferably using Jscott's "option C" and flash the GB bootloaders. Then proceed to installing CM9, and remember to do a double flash. (wipes, flash, reboot, phone hangs, boot into cwm with 3-finger combo, wipe and flash!)
This way you'll solve both the recovery bootloop and the rainbows, and bring you CM9
Sent from my sweet and buttery Infuse
andros11 said:
By stucked at recovery you mean it always boots up into recovery (recovery bootloop)?
You should go back to ULCB3 stock, preferably using Jscott's "option C" and flash the GB bootloaders. Then proceed to installing CM9, and remember to do a double flash. (wipes, flash, reboot, phone hangs, boot into cwm with 3-finger combo, wipe and flash!)
This way you'll solve both the recovery bootloop and the rainbows, and bring you CM9
Click to expand...
Click to collapse
Yes the problem right now is that the only understandable thing I get out of the phone is the samsung logo at boot.
I think it goes into recovery but I can't really tell because the screen is garbled. Also using "adb reboot download" seems to make no difference to Odin or Heimdall which both refuse to see the phone.
I would love to find out exactly which state the phone is in but my knowledge of adb isn't that great to say the least.
How do I flash bootloaders using adb only?
I totally appreciate your help Andros, totally out of luck with this so far.
The only way to flash bootloaders is in download mode using either odin or heimdall.
Adb reboot download should get you into download mode as long as you have adb access while on recovery. If not, get into download mode this way:
Take out battery, and put it back in.
Hold both vol+ & vol- (don't press power)
plug in usb cable to phone.
Once in download mode, your phone should be recognized by Odin. If not, try reinstalling the drivers using the ones in the iset thread.
There are many threads about this situation that should also help you out, just search around
Sent from my sweet and buttery Infuse
Okay, somehow I missed how to use the keys to enter download state.
In my mind using adb to enter download state should be the same as the keys but somehow that isn't the case.
Got the GB bootloaders installed and used an odin package and then redid the CM9 installation.
Sorry about spamming this thread, and thanks to andros for getting me going again.
Interesting, I also didn't know that could make a difference. Lesson learned lol
Glad you got it running again
Sent from my sweet and buttery Infuse
hi , i am having serious problem ,
my i997 was ok before after doing a mess , now its in 3e reocvery restarts in samsung logo comes to 3e recovery again and so on.....i did everything ,flashed with I997UCKH1 but all in vain .
Could somebody guide what to do ?
umairrashid1 said:
hi , i am having serious problem ,
my i997 was ok before after doing a mess , now its in 3e reocvery restarts in samsung logo comes to 3e recovery again and so on.....i did everything ,flashed with I997UCKH1 but all in vain .
Could somebody guide what to do ?
Click to expand...
Click to collapse
Use odin or heimdall to repartition back to uclb3 stock.
andros11 said:
Use odin or heimdall to repartition back to uclb3 stock.
Click to expand...
Click to collapse
i used heimdall ,it flashed successfully but still no result .
how to do he same using odin ?
could you please add more steps in order o recover the phone fully .
i am in a big problem .