Related
okay after reading a bit more and help from other users finally got this working and maybe itll be help to someone else
PHONE MUST BE ROOTED CHECK OUT THE ROOTING THREAD
AND DO THIS AT YOUR OWN RISK UNDERSTAND THE RISK OF OC
THE ARIA IS ALREADY PRETTY ZIPPY SO PERSONAL CHOICE
1. grab any rom cm6 or liberated, then go into the kernel thread and download the kernel pack
some people are reporting certain versions are breaking wifi,3g etc
i used oc768-v3.2 legend zip wifi working no issues plus this is sufficient for me
but if it doesnt work play around with diff kernels
2. boot into recovery mode vol down and power
3. flash your rom then flash the kernel pack and reboot
4. download and setcpu app and start OC
im not taking any credit for any of this but i wanna thank for everyone who worked on this
i just simply wanted to write this because i wanted to try this but i got alot of diff info
but after other users made a few key points decided to write this
anyone feel free to add to this and if i made any errors or whatever mods go ahead and change it
Read ,Search ,Read . I had no luck with the 3.5 kernels tho.
What you want is some hand holding it looks like.
I figured this all out for myself by reading the forum.....
but anyway I'll answer it in the foolish hope of no more people asking the same questions
1. download what files....? if your talking about roms i think youll know where to go after reading this post.
2. you can use whatever rom you like, the main two on this forum and as far as I know on the aria full stop are Liberated and Cyanogen Mod 6. Liberated is based on the stock aria rom so its pretty much what your used to with your stock aria (minus the AT&T rubbish plus a few added perks). Cyanogen Mod 6 is based on bare android so it doesn't have all the sense ui, it is also based on froyo which is the version above eclair (which is what is running on your base aria/ liberated rom). Do not ask which rom to use, it is up to personal preference you just have to try both and see which one you like.
3. you flash a kernel the same way you install a rom on your phone except instead of selecting the rom .zip file you select the kernel .zip file. You should first flash a rom and then afterwards flash the kernel. As ycode90 said some kernels don't work so just go through the process again and try another one, the 3.2 825 kernel was working on liberated for me so try that one.
All OC kernals broke wifi or mobile network on my buddies Aria, I left him with the stock kernal from CM6.
Sent from my T-Mobile G2 using XDA App
im running dumfuqs oc kernel v3.2 844, on cm6 v6.0.2.1 my wifi works and the wireless tethering works. it runs fast the only thing that doesnt work is my bluetooth
bkmo said:
What you want is some hand holding it looks like.
Click to expand...
Click to collapse
no sir thats not the case see how after some user input sheds new light
now i can head back to square one
f it if i get it working ill post a how to
overclock went great but it keeps crashing my swype keyboard and livewallpaper
did a nandroid restore and it went back to normal and reflashed the kernel and it did it again
Has been my exp. LWP and overclock do not play well together.
ycode90 said:
Has been my exp. LWP and overclock do not play well together.
Click to expand...
Click to collapse
Yup, it had been my experience that these OC kernels and *anything* that utilizes gpu sucks. There isn't a kernel for the aria at this time, and by using these kernels here you are increasing cpu performance at the expense of gpu performance. I don't believe its worth it at all just for a linpack number.
Yep patiently waiting for an ARIA kernel.
Working over clock:
http://forum.xda-developers.com/showthread.php?t=736019&page=33
, just need to get the latest nightly, 87 so that bluetooth, wifi, and network all works great.
Good Luck
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
lasertits said:
I don't understand how to flash the kernel or rom. I see no options in Recovery. I'm on CM6.0.2.1 trying to use oc844-v3.5-legend-cm-2.6.29-signed. Help?
Click to expand...
Click to collapse
you install it the same way you installed the CM6 Rom. Put the kernel zip on your SD card and install the zip via Clockwork. Also anytime you flash a new Rom you will have to reflash the overclock kernel.
Sprint_Mod
Because my ROM makes "Sense" ...
About this ROM:
My ROM is designed for the users, who like me enjoys the "Sense" UI and enjoys the stock rom or wants a stock base to work off of. This ROM is tweaked to add some features that come in custom ROMS and keeps it simple for those of us that do not need all of the amazing eye candy, also for those who does not like all of the added crap that come shipped in most carrier ROMs, this rom is customizable because you can remove most of the apps that is NOT attached to Sense or Android and that will NOT break system components. The design of the ROM is to be a big improvement over the stock experience.
Features:
1. The following apps can be removed is so desired.
Amazon MP3 Store
Sprint TV and Widget
Sprint Football
Sprint Nascar
Sprint Navigation
Facebook For Android
HTC Mobile Evo Guide
Qik
Sprint Zone
Quickoffice
2.Apps2sd (Thanks Darktremor) original thread can be found here http://forum.xda-developers.com/showthread.php?t=715938&highlight=apps2sd
3. Deodexed which means that the image is themeable some themes can be found here http://forum.xda-developers.com/forumdisplay.php?f=655
4. Many scripts and code added like compcache, dalvik2cache, apps2sd, zipalign ........
Warning:
1. YOU MUST HAVE YOUR PHONE "Rooted" TO USE THIS Image.
2. This Image will wipe your data however a data wipe is always recommended before you flash any ROM.
READ ME: This ROM is designed to be fully functional meaning that everything works with no workarounds. The design of this ROM is "traditionally stock-like" and "as is" please do not ask about adding or removing a feature or program, if you enjoy this ROM and want to use it as a base for your ROM by all means do so but please give credit where credit is due .........
This ROM may update frequently as I learn the architecture of "android" and this device, feedback is cool, but not all will be taken into consideration ..... Enjoy
-----------------------------------------------------------------------------
Updates 11-09-10
Changed the name of the ROM to Sprint_Mod since it is basically stock tweaked out
went back to a more simpler ROM format
removed netarchy's kernel and added my own modified stock kernel
removed the mms fix (I just want to insure that everthing works like its supposed to)
removed the usb tether fix (it was slow and limited compared to using pda net)
removed the 4-in-1 reboot menu (I want everything to be stock)
added the ability to change the bootanimation by just replacing the bootanimation.zip found in data/local
all kinds of other under-the-hood **** if you like the other stock like ROMS you'll love this ****
-----------------------------------------------------------------------------
Updates 11-01-10
disabled dialer vibration
added calk's mms compression fix
added netarchy's 4.2 kernal (which is very fast)
added 4-in-1 reboot menu
added my own custom image for Rosie
using vanilla lock or ASOP lock (got tired of the HTC Lock telling my business)
removed the htc lockscreen and added it to JD_Mod_Addons
removed all the SDCard apps as they can be installed from the market
removed the profile and ringtone widgets from the system and added them to JD_Mod_addons
removed bootup animation and boot sounds and now using the standard android boot animation
added 5mb mms fix
all kinda other **** too trust me this is better than the others I put out ........
Download
..........................................................................................................................................
Updates 10-27-2010
Updated base to minor update 3.30.651.2
Added some custom transitions
Added Pandora to the JD_Mod_Addons
tweaked app cache
Disabled haptic feedback for touch buttons
Changed some default settings
DOWNLOAD
http://www.mediafire.com/?w47t85omi8ycf0s
-----------------------------------------------------------------------------
Older Version
Initial Release 10-23-2010
Download
http://www.mediafire.com/?fs5yz88emffga05
Nice
4Sure, it makes sense
Gonna this a try, I'm one of those who like it plain and simple. Thanks Guy!!!
If I change install kings #11 kernel will it mess up usb tethering?
Sent from my evo
Every one of the apps you listed in #1 can be and have always been able to be removed without breakin sense... always.
You said any app can be removed without breaking others... i can bet you differently. Sense is sense... there are things you just cant remove
Any odex or deodex rom and using root explorer can just delete those apps and a ton more.
My advise is to make a barebones one.
Right now, if i read your post correctly... everything is still there.. so what makes it ... what ever your calling it.
Not hating. Just stating a fact
And i dont see how this rom is any different from a stock rom other than you included apps on the sd card we can install...
Just asking thats all
Sent from my PC36100 using XDA App
JD, hell never seen you on XDA. Rough crowd. Always good roms.
v_lestat said:
Every one of the apps you listed in #1 can be and have always been able to be removed without breakin sense... always.
You said any app can be removed without breaking others... i can bet you differently. Sense is sense... there are things you just cant remove
Any odex or deodex rom and using root explorer can just delete those apps and a ton more.
My advise is to make a barebones one.
Right now, if i read your post correctly... everything is still there.. so what makes it ... what ever your calling it.
Not hating. Just stating a fact
And i dont see how this rom is any different from a stock rom other than you included apps on the sd card we can install...
Just asking thats all
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
the stock rom for this phone unlike many was very good not very bloated and functional the only thing I was doing was sharing my stock experience with the community but on the technical aspects my rom is different from the stock because it has many tweaks to it for even more functionality. I mean I'm just trying to figure out what kind of a chair you are sitting on claiming your facts ? anyway if you use any rom beside a open source rom, sense is integrated so deeply into the android core os that removing part of it most certainly breaks something in settings or a system dependant component. for example use a rom that has sense removed and go to your settings in the personalize section and see how many you can get it to force close? With my rom nothing is broke everything works plus .... say if you use this rom install some apps from your sd that you have .... and you decide to use another rom then reflash this one the apps you installed will be there already re-installed ... I dont believe the stock rom does that. So instead of trying to inpose your opinionated facts to me why don't you do us all a favor and read, if you don't like what you see then move on.
Thank you
JD
Nice job jak! This may be the custom rom i test out. Don't worry bout the great opinions in the development world. They never cease to amaze me
smiznith said:
Nice job jak! This may be the custom rom i test out. Don't worry bout the great opinions in the development world. They never cease to amaze me
Click to expand...
Click to collapse
Thanks man .... been around long enough where that doesnt bother me anymore
Great, I love stock based roms. Though I am already running Myn's 2p2 warm rom. I will try this next. Keep up the good work.
douche move v_lestat
i love this rom.
its what i was looking for.
it just needed a battery indicator that i just added.
but i have a problem figuring out what kernel to use?
can one of you help me?
i need a very good battery saving kernel for this ROM.
and its gonna be the rom i will be running for my phone=]
Update 10-27-2010
Updates 10-27-2010
Updated base to minor update 3.30.651.2
Added some custom transitions
Added Pandora to the JD_Mod_Addons
tweaked app cache
Disabled haptic feedback for touch buttons
Changed some default settings
DOWNLOAD
http://www.mediafire.com/?w47t85omi8ycf0s
Caspers25 said:
i love this rom.
its what i was looking for.
it just needed a battery indicator that i just added.
but i have a problem figuring out what kernel to use?
can one of you help me?
i need a very good battery saving kernel for this ROM.
and its gonna be the rom i will be running for my phone=]
Click to expand...
Click to collapse
What battery indicator did you use?
Sent from my PC36100 using XDA App
I'm having a problem running this flash, it won't get off the android b boot animation. I can't seem to run kings cfs #9 kernel and smooth icons on top. Why is that? Jak, can I get some help?
Sent From My HTC EVO
Caspers25 said:
I'm having a problem running this flash, it won't get off the android b boot animation. I can't seem to run kings cfs #9 kernel and smooth icons on top. Why is that? Jak, can I get some help?
Sent From My HTC EVO
Click to expand...
Click to collapse
yeah link me to what you are using and let me try it out .....
..
screenshots please
kanyewest said:
screenshots please
Click to expand...
Click to collapse
it looks just like the stock ROM
Wow people. Read the post. Cmon it is what it is. Plain good and simple.
Sent From My HTC EVO
jakdillard said:
yeah link me to what you are using and let me try it out .....
Click to expand...
Click to collapse
Sorry no links.
I'm using smooth icons on top of Kings CFS # 9. But it doesn't seem to load.
Sent From My HTC EVO
I am currently on CRANIUM. It's hard to compare various ROMs together. Please any expert who have tried all of these ROM, reply me soon..
Thank You
ezeeyahoo said:
I am currently on CRANIUM. It's hard to compare various ROMs together. Please any expert who have tried all of these ROM, reply me soon..
Thank You
Click to expand...
Click to collapse
What problem are you having with CRANIUM that you want to update?
A few glitches...
In sleep mode, data connection stops working...I observed many times.
Apps are not properly signed while installing updates!!
Lower DPI is of no use. It give me useless space.
But I am very happy and thankful for the improvements developers bring in with CRANIUM, for our SGSL.
I asked for best custom ROM because I always want to have best things on my phone. ain't you?
I am also on Cranium 3.1 KPH. Not happy with battery life otherwise okay. I also want to change to better ROM to get more battery life and 10 lock screens. Not sure which to flash XXKPM, XXKPN, DXKP9 or DDKP3
Sent from GT-I9003 using XDA app.
---------------------------------------
GT-I9003, GB XXKPH, Rooted, Deodexed, CF-Root
Wave 2, 8530, Bada 1.2, DDKA1
Reading many threads I find & have concluded there is no GB stock rom which is bug free as of now hence all custom roms inherently have the bugs just posted this thread wondering why update to GB?
http://forum.xda-developers.com/showthread.php?t=1344420
jesrani said:
I am also on Cranium 3.1 KPH. Not happy with battery life otherwise okay. I also want to change to better ROM to get more battery life and 10 lock screens. Not sure which to flash XXKPM, XXKPN, DXKP9 or DDKP3
Sent from GT-I9003 using XDA app.
---------------------------------------
GT-I9003, GB XXKPH, Rooted, Deodexed, CF-Root
Wave 2, 8530, Bada 1.2, DDKA1
Click to expand...
Click to collapse
Cranium 3.0 KPH is better than 3.1 gives me battery life of around 40 hours with normal use
Go for i9003dxkp9!!!!!!!
Bro go for i9003dxkp9 the Asian version and install poseidons rom rc1..its stable and fast..
problems with cranium 3.1
I had flashed cranium 3 and the 3.1 hot fix over xxkph rooted with cf root.
My experience
1. No change in battery life even after using no frills cpu control app.
2. was not able to update gmail from android market.
3. gmail and xda app color scheme bright blue over dark blue was not easy to read. Couldn't change it. (I had posted question on this)
4. Didn't have better benchmark scores
5. GPS lock was slower than xxkph
6. SMS threads would show wrong sequence with wrong time tags.
It looks like most roms (both stock and custom) are not adequately tested -otherwise basic flaws like above wouldn't go un -noticed.
This is just to make people aware that they should flash only to experiment and have fun with that.
Hemant
hemantkarandikar said:
I had flashed cranium 3 and the 3.1 hot fix over xxkph rooted with cf root.
My experience
1. No change in battery life even after using no frills cpu control app.
2. was not able to update gmail from android market.
3. gmail and xda app color scheme bright blue over dark blue was not easy to read. Couldn't change it. (I had posted question on this)
4. Didn't have better benchmark scores
5. GPS lock was slower than xxkph
6. SMS threads would show wrong sequence with wrong time tags.
It looks like most roms (both stock and custom) are not adequately tested -otherwise basic flaws like above wouldn't go un -noticed.
This is just to make people aware that they should flash only to experiment and have fun with that.
Hemant
Click to expand...
Click to collapse
I agree with you. The MIUI player can't get lyrics although I have connected to the WIFI network and set to allow lyrics download. It's not very important but I hope the cranium can do better
I am using XXKPM with LegendX theme. it looks awesome with all features. So far I didnt have any problem I can call it as a bug. its smooth and stable. I recommend you to go for xxkpm and do convert your file system to ext4. its huge increment in speed.
I hope it helps.
jimmychoy1995 said:
I agree with you. The MIUI player can't get lyrics although I have connected to the WIFI network and set to allow lyrics download. It's not very important but I hope the cranium can do better
Click to expand...
Click to collapse
it can............check out the video...it does in that
I did not create "this" and I'm not taking credit for it. This is an awesome kernel created by an awesome dev. I have seen a lot of people asking about where to find this kernel so I asked the dev if I could make this thread to help everyone out over here. I do plan to keep this updated as he updates his OP over on Rootz.
LINK TO ORIGINAL POST ON ROOTZWIKI
This is a kexec Touchwiz test kernel. Use his thread to report bugs, etc.
WARNING: If you're on full stock, you must install busybox first.
DOWNLOAD
latest beta kernel: flashable zip
to return to stock kernel: flashable zip
INSTRUCTIONS
Make sure you're on a recovery that supports auto-flash (any CWM compatible recovery should work - I use v6.0.1.0).
Make sure your ROM has busybox installed properly (otherwise it will bootloop).
Download and flash the zip file in recovery (yup that's it).
Reboot (it will appear to boot twice after that and at every boot).
FEATURES
Unnecessary components removed for lean and fast kernel.
Compiled using latest Linaro compiler with additional optimizations.
Latest Linux updates applied (currently up to 3.0.39).
Ramdisk optimizations.
Kexec (credit goes to Mike Kasick, Austin Dicken, etc.)
OC'ed to 1.9Ghz (limited to 1.51Ghz at boot, use an app to change max freq)
SIO I/O scheduler default
Fast Charge (toggle via the "ffc" script - open terminal, type ffc then enter, plug in phone via USB)
On-demand governor backported from Linux 3.5
CHANGELOG (BETA)
v0.1 (b31fd85c46133f21d3e83d2a5c7d6f94) - initial beta release. Changes from test v12.2.
CHANGELOG (TEST KERNEL)
v10.4 - initial test release
v11.1 (0a169bbc58f7f5b14315f6e2dad47226) - leaner kernel, ondemand governor backported from Linux 3.5, latest interactive governor (not recommended yet)
v12 (8d31143328f19a6183ce6ed50d3f2f76) - fixed default max frequency (really set to 1.51ghz), custom boot animation support, init.d support, Linux 3.0.39 update
v12.2 (3640421cf043e4bdb88de3162c9984fa) - fixed blue LED issue at boot for some ROMs.
TODO
This is alpha/test kernel. More development will come.
Remember this is just a repost of his OP. To get support from the dev you will more than likely have to go over to Rootzwiki to get it. All of the links in this post redirect to the OP on Rootzwiki and not to download links. You will have to go to his OP to download the kernel.
Disclaimer said:
Me and this dev are not responible for you not reading the entire post on either site and bricking your device or anything else you might want to blame either of us for.
Click to expand...
Click to collapse
How do I use USB Fast Charge?
1) Unplug from USB cable.
2) Open Terminal Emulator, type "ffc" (without quotes) and enter. This command will toggle your fast charge state.
3) Plug it back in.
Note: running the same command again will disable fast charge.
Also, when fast charge is enabled USB communication will be disabled.
Why KEXEC?
I actually had my own hybrid recovery/kernel method, which was kinda cool. No special kernel modification was necessary, simpler boot hijack, etc. But it did mean that recovery was modified and required flashing into recovery partition for every new version. Plus all the cool cats were using kexec.
I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.
bobloblaw1 said:
I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.
Click to expand...
Click to collapse
I didn't want it to get lost in General and I asked him if he wanted me to make one or if he could make one over here for us and he told me to go ahead. I see where you are coming from though.
EDIT: If mods feel this should be elsewhere feel free to move it. I just figured this would be the best place to put it.
Yah i think it will be useful since half of the Rom threads are all about this kernal anyways there taking up way to many pages. There does need to be a seperate thread for it so good ups.
If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM
kennyglass123 said:
If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM
Click to expand...
Click to collapse
Sent you a PM with screenshots of imo and I's conversation.
Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.
d1ez3 said:
Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.
Click to expand...
Click to collapse
I have never tried to charge with the phone off. Beta just released about 20 minutes ago. Try that and see if it fixes it.
EDIT: Might have found the answer over on Rootz.
http://rootzwiki.com/topic/31329-imoseyon-beta-leankernel-tw-88-v01-kexec/page__st__260#entry870710
thanks, trying the beta now
No problem. I have the beta on my phone and it seems really solid so far.
this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.
droidstyle said:
this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.
Click to expand...
Click to collapse
I didn't realize there was a link to Imos kernel anywhere except inside of ROM threads so I figured I would duplicate his post here so people here would see. There is a whole lot of people who posted in the Synergy thread that they didn't know where his kernel was or where to find it and things like that. I figured the easiest way would be to have a post on XDA devoted to his kernel. If we had a mega thread of all the root methods, tools, ROMs, kernels, and themes then that would probably be better than this to help people find anything they may need for their phone with very little effort.
I'm assuming this wont work on the cm10 nightlies?
Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app
vx2ko said:
Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
yes. in their current form your device will still boot like 3 times though. There will be no change. In the next few days devs will be unpacking their zips and removing the kexec process. Now they just need to copy over any modules and dd the kernel to mmcblk0p7. But yes, these kernels will still work fine right now.
When the devs repackage them, however, you will no longer have to bootloop 3 times before booting with your custom kernel. it will load on first boot everytime, until you dd the stock kernel back to mmcblk0p7
When I flash nothing happens?
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?
Heatshiver said:
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?
Click to expand...
Click to collapse
Ask in the proper section this is for Verizon GS3.
Sent from my Galaxy SIII
Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK
TokedUp said:
Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK
Click to expand...
Click to collapse
Nope. Imo says not to use the latest (October 27) release on anything newer than G1.
Sent from my SCH-I535 using xda app-developers app
Welcome to the new age of Gingerbread!!
Gingerbread? WTF? Yes I know everyone wants ICS&JB but they have not had any of this kicka$$ gingerbread yet.
4g, HDMI, SMS/MMS, FFC, Flash media (streaming internet video), Every freature HTC offered with this phone works with this rom (even the kick stand. LOL!!)
I have been in my kitchen cooking up something special for yall OG users. Until now you had a difficult choice to make. Use gingerbread to have full function of your OG or use ICS/JB and have the looks but lose some features. Now this is not just another themed out gingerbread rom trying to be ICS/JB. This is a complete rework of GB with many features found in ICS/JB back ported. I did not create this rom but I did merge the source code with multiple OG device trees to get it working. The real credit goes to SquadZone!! These guys are awesome and have done a super job with this. So for everything that works thank them and for everything that is broken blame me.
So lets take care of the b.s. first.
https://github.com/CyanMobile - Source I used to build from
https://github.com/atyoung - Source used for kernel
https://github.com/jlmancuso/KAKA - My source of KAKA (not uploaded yet, still testing before releasing)
My kernel K.A.K.A. is still in the works. I just have not had time to get it finished yet.
Thanks to:
SquadZone - for an awesome source
Atyoung - for the best gb kernel
Evervolv - for being the best (oh and I stole some of my device tree from them)
CM - another awesome group (yes I stole some of my tree from them too)
B-boy - for most of the black and transparent apps (http://b-boytm.webnode.com/themed-apps)
Google - without I would never have been able to build this beast from source (by Google I am refering to the search engine mostly)
PlatinumPenguin - who donated his old 3vo to me (this will also be built as a tablet style rom later for him)
thedemonic - testing and repacking the boot.img for me (thanks a million!!!)
....more will be added later
Also always feel free to hit me up on google (plus+, talk, or old fashion email, [email protected])
Beta 3.0 is out but it is not the grand enchilada I have planed. With all the small things acting up I have had to put the cool things to the side for the moment and focus on the core. I have been running this all day downloading, surfing, streaming music, video, playing with dropbox. So I think we are now ready to have enjoy this Beast of a Rom.
Install Instructions
1. Backup your current ROM
2. Download and flash current rom
3. Do not flash anything else (except kernels) If you flash any mods you will most likely have issues.
4. Reboot phone and wait. First boot takes a very long time and you may get a reboot right after the splash screen. This is normal no worries also the boot song will finish before the rom is done loading.
5. Go to Post 2 and setup your gps and a2sd if you want it.
Mods:
Alsa Beats EQ & Audio FX widget - http://forum.xda-developers.com/showthread.php?t=1932486
Crossbreeder - http://forum.xda-developers.com/showthread.php?t=2113150
SONY BRAVIA 2 + audio effects maneger + SONY XLOUD - http://forum.xda-developers.com/showthread.php?t=2147896
Random Boot animations - http://forum.xda-developers.com/showthread.php?t=1434950
V6 supercharger - although I am still playing with settings I believe that V6 has slowed down the rom - removed from beta 4.0
For those who want to donate for the development of this rom I am sorry but I am no longer taking dontaions. If you feel like you must give I am providing a link to the Red Cross and would like for yall to give them whatever it is yall wanted to give to me. Mother Earth has come to take that which is her's and I like most others would like to give to those who really need it. Link below is for Red Cross donations. Again anything you felt like donating to me please send it to the Red Cross instead. I have given yall the link below and please help those who really need it.
https://www.redcross.org/donate/index.jsp?donateStep=2&itemId=prod10002
If you donate to the Red Cross I will make sure yall get your name on the thanks list and I will put you on my beta tester list so you will not only help those who have faced natural disasters but you can help make this a better rom for everyone.
Lets keep this tread clean (free of non-development chatter)
I have created a thread for all the things you want to ask or need to know in General. Lets use it instead of this one. Please?
CyanMobile help, requests, and general info
http://forum.xda-developers.com/showthread.php?t=2305750
Change logs and Downloads
Change Logs
(06/14/13)
CyanMobile Beta 4.0
changes to mms source (hope this will fix no mms issue)
new tweaks - source based
all gapps are inverted and working !!!
removed V6 supercharger
removed transparent apps
CyanMobile will now be uploaded only to dev-host since goo.im has been having so many issues lately (sorry goo but have to have reliable download site)
(05/21/2013)
CyanMobile Beta 3.0
Beta 3.0 is a fresh compile different from the testers
Modified source code (default settings and such)
Fixed some of the apps and replaced the ones I could not fix
Changed boot audio once again (who wants to guess what this will be?)
Added V6 supercharger (although it might be gone next release)
Sure the are other things but I have been pounding away for almost 24 hrs so I cant remember
Oh last thing do not update Talk to hangouts (it does not work on this rom yet)
(5-24-2013)
CyanMobile Pre-Beta 3.0 Tester 4
Special Release
Since I have what looks to be a stable base I wanted to go ahead and let yall use it. This does not have the custom kernel or install script yet (been busy working Lol! So I have not finished the kernel. This release has 100% of the included apps working and so far I have had great feed back from my beta testing team. Thanks guys. All of the apps from 2.3 are still in 3.0 (transparent & inverted) with only a few changes to the versions. So far everything downloaded from the market works without any issues.
BOOT AUDIO WARNING
this audio should be 99% safe (nothing bad) yet might still give you a shock factor
Special Flashing Instructions
1. DO NOT!! flash any extra tweaks, or mods!! The can and most likely result in bootloops and will most likely require a complete wipe and reinstall of CyanMobile!!!
2. You can flash other GingerBread AOSP kernels. This could also have adverse effects. Like always this is just a warning if you flash it you might have to fix it. LOL..
3. THIS WILL WIPE everything but your sd-ext and sdcard. I always suggest wiping your sd-ext if you have problems with the first install. You made a backup right?
4. Flash Rom
5. Reboot (Gapps included with rom) WARNING: DONT UPDATE ANY GOOGLE APP THIS WILL CAUSE PROBLEMS IF YOU DO.
6. Wait and enjoy your boot audio (first boot takes a very long time)
7. Please let the phone sit for a few mins before the first use this ROM has lots of things it only does on the first boot so as hard as it can be please, please, please wait. It will be worth it.
8. Now reboot phone and enjoy the wonders of GingerBread!! Who knew it could be so good?
9. Now for those who read all the instructions before doing something I have a treat for you.
10. Now go to http://forum.xda-developers.com/showthread.php?p=42092464 follow the instructions I posted there to enable a2sd (yes a small part of my CyanMobile settings map, Now for sale as an app for only $19.99 Lol!!
(5-16-2013)
CyanMobile Beta 2.3
No major changes except the boot.img
Should fix status 7 error
(5-15-2013)
CyanMobile Beta 2.1, 2.2, & image-file.zip
Removed supercharger (maybe temp, maybe perm not sure yet)
Fixed random boot animations!! (there are now 10 different boot animations)
JB binary still not playing nice with this rom
Changed kernel to SBC-FSO version (was just SBC)
Added hdmi app
Removed market updater
Removed BMKG.apk (not sure what it was but it was not in english)
Legacy launcher added back (was included with souce although I like the adw launcher from the 3vo build better)
Added an ics style launcher
Added older RomToolBox (do not upgrade this version will let you backup and install app+data without buying the app)
Removed adfree (romtoolbox has a better version)
Changed boot audio (that other one was giving me a headache)
I will also be upload a zip with image files so if you get status 7 you can always flash these through bootloader (or if on hw004 they can be used through recovery)
(x-xx-xxxx)
CyanMobile Beta 2.1
Never released to public
I just listed it to fill in the gap
(5-13-2013)
CyanMobile Beta 2
gapps are built in
Fixed Market
Added in a butt load of tweaks and apps
Main settings -- Additional system updates still not working (will remove on next build)
(4-20-2013)
CyanMobile Beta 1
Original Release
Market does not work
Main settings -- Additional system updates (force closes)
nothing added (pure build, stock cm kernel)
As yall know goo.im is once again having some problems. So I have opened an account with Dev-Host so hopefully one of the links will work when you try them.
Downloads
PLEASE READ THIS THREAD BEFORE INSTALLING THIS ROM. YOU WILL NEED TO KNOW SOME VITAL INFORMATION BEFORE YOU WILL BE ABLE TO ANSWER CALLS.
http://forum.xda-developers.com/showthread.php?p=42092464
Beta 4.0
http://d-h.st/n2a
size 351.35 (trimmed the fat so to speak so it is now smaller than 3.0 )
Beta 3.0
http://d-h.st/Vdl
Size: 419.10
Dry version (only gapps added)
http://d-h.st/kGo
Size:202.12 MB
MD5: 614bb7a5e53cbc9731cca9e9a1fd9e42
Pre-Beta 3.0 Tester 5
This still has Mason's G-series kernel (K.A.K.A. is not ready yet it is giving me $h!t LOL)
http://tinyw.in/A2Hn
Size: 380.89
MD5: 818e7d83f8acb528524c1d16e85c3141
http://d-h.st/df9 [/SIZE][/COLOR][/B]Dev-host mirror since goo.im is having issues
Beta 2.3
http://tinyw.in/vJTZ
Size: 385.76
MD5: 1930c2604b0845236f5adc575483e58d
image-files-zip
http://tinyw.in/P64T
Size: 324.63
MD5: 2f109b7710e6f3d89af1e88259976
Beta 2.2
http://tinyw.in/uU31
Size: 385.75
MD5: ed0e167923a633e1e90d3651f77f4c64
Beta 2.1
Never released to public
Beta 2
http://tinyw.in/ya7G
Size: 562.99
MD5: 4428e10ecdc6f774eb0a53dd86cadd14
Beta 1
http://tinyw.in/d33g
Size: 106.81
MD5: 09519613dc2d872c9bfb70198be
KAKA Kernel information and change log
KAKA is now available for your Og!!!
What is KAKA?
KAKA stands for Kick A$$ Kernel Aosp version. It is an updated and modified version of the Mason G series kernel.
What has been done to make it KAKA?
Well this is the first release and also my first kernel so it is a work in progress. I have added 3 governors and enabled SWAP.
What is in KAKA's future?
I plan on adding more features such as two way call recording, adding more IO schedulers, and bringing this up to the latest Linux kernel version.
So what governors have been added?
I have created/modified 3 of my own while also including other available governors. Here is a list of all the governors.
Brazilianwax
conservative
intelllidemand
interactive
interactivex
lagfree
lazy
lionheart
lulzactive
minmax
ondemand
ondemandx
performance
powersave
samurai
savegedzen
scary
smartass
smartass2
smoothass
superbad
userspace
virtuous
wheatly
and my new ones
deathbysoap
diablo
hipkat
This kernel will be a match for the rom. More options than most users will know what to do with. For now it is only available with CyanMobile or from source if you want to compile it yourself. There is also plans for ICS and JB versions some time in the future.
So what are deathbysoap, diablo, and hipkat?
Well they are my tribute to 3 of our great XDA members and modified versions of existing governors. I have chosen each governor to reflect (somewhat) each member and then modified each one to make them better.
Death by Soap - is a modified version of intellidemand
Diablo - is a modified version of SmartAss2
HipKat - is a modified version of Conservative
Each one has been tweaked to give better performance and battery life. Specifics of the modifications will be provided later.
What I/O Schedulers will be available?
noop
deadline
cfq
bfq
sio
vr
Change Logs
(TBA)
KAKA 1.0
First release!!!!
Download Links
Well no links yet Still testing and making changes. Also still have to update my github so that I am gpl compliant.
If all users would please start using this simple form located below it will make things easier for everyone. Hint: if you use the red color code already in the form it will make reading the bug/issue report easier for me and other users who might have similar issues. Thanks for all your feedback without it this rom could never improve.
Bug/issue Report Form Link:
1. Rom version - beta#
2. Kernel -stock
3. H-boot - 6.16.16
4. Recovery type - RA/twrp/cwm
5. Hardware type, radio, and baseband ( not required but can be helpful) - baseband 2.15.00.01.15
6. What happened (crash, reboot, boot loop, etc.) - system crash
7. What you were doing when it happened - trying out xda app
8. Does it happen every time or is it a random issue - everytime
9. If it is an app please list the app version and if the app was downloaded from the market or installed via other method - inverted xda app from xda website
10. Are you using a2sd? Which script? - Yes, the built in a2sd / DT's a2sd
11. If using a2sd please list sdcard partition specs - 16 gig class 10 Sandisk, 256 MB swap, 1.0 gig ext 4 sd-ext partition
12. Can you provide a logcat (a logcat app comes with the rom to make this part easier) - no logcat dont know how
13. Logcats should be loaded to pastebin or attached to your bug report post. - https://pastbin.com/user/logcat.txt or attach to post and rename to logcat.zip (do not compress just change the extension because xda will only allow up to 512 KB text files)
13. Any tweaks, mods, or zips you flashed besides those I provided yall - no, no crossbreeder either yet.
14. Any other information you think might be important. - im a noob/just burned a bowl/just finished a 12 pack
Nice... Kinda first.
What you mean kinda first? Mine dont count. LOL! I pull two extras off the top to keep the OP clean and neat. Oh by the way for those who get the rubix cube just tap it and it will go away. Also random boot animations are not really setup yet it just has the ones for the nexus which is where I stole the script from. LOL! Well I guess stole is not the correct term since I gave credit. Swiper no swipe!!!!!!!!!!!
oh well. this was to be an edit of my change log but somehow became a post. not enough sleep and too much bud
Guess I should flash my zip since I have not tested it yet. This was pulled straight from my phone and zipped up and sent to the net before I even thought to test it. I sure hope it works.
Edit: Rom works but not like what I had in my phone. v6 freaked things up. Busybox is massive a su bianary is missing along with a couple of apps and mods. New upload this afternoon.
Kinda second....
Sent from my PC36100 using xda app-developers app
Oh no, I'm at work and I can't try this out yet. Not to worry I will when I get home.
jlmancuso said:
oh well. this was to be an edit of my change log but somehow became a post. not enough sleep and too much bud
Guess I should flash my zip since I have not tested it yet. This was pulled straight from my phone and zipped up and sent to the net before I even thought to test it. I sure hope it works.
Edit: Rom works but not like what I had in my phone. v6 freaked things up. Busybox is massive a su bianary is missing along with a couple of apps and mods. New upload this afternoon.
Click to expand...
Click to collapse
Yea V6 can be a ***** to work with sometimes,it definitely doesnt play well with other tweaks.Nice to see you finally got this going.
Piqued my curiosity on this one. Downloading now.
Sent from my PC36100 using xda premium
Wow does this have a ton of options. I haven't seen a ROM this feature packed since MIUI. It also runs fast even in Boot Manager, which runs from the sd card. I can only imagine how fast it runs from the phone. Still exploring, but excellent job!
Sent from my PC36100 using Tapatalk 2
taadow1030 said:
Wow does this have a ton of options. I haven't seen a ROM this feature packed since MIUI. It also runs fast even in Boot Manager, which runs from the sd card. I can only imagine how fast it runs from the phone. Still exploring, but excellent job!
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
Boot manger? That's still around lol. Glad to hear it's working great.
Well had it booted up, market was working fine til it updated itself then it kept forclosing... Other than that kick a$$ job JL... Had to nand back to cm 10.1 to holla back on here...
Sent from my PC36100 using xda app-developers app
status 7 on installation guess i have 2 wait for the corrected beta 2 to flash
bnasty06 said:
status 7 on installation guess i have 2 wait for the corrected beta 2 to flash
Click to expand...
Click to collapse
Might have a bad download..
Sent from my PC36100 using xda app-developers app
hondafreak513 said:
Might have a bad download..
Sent from my PC36100 using xda app-developers app
Click to expand...
Click to collapse
nah its happened a couple times before already talked 2 jlmancuso about it in the past i forget all the details nd the reasons why its been awhile
bnasty06 said:
nah its happened a couple times before already talked 2 jlmancuso about it in the past i forget all the details nd the reasons why its been awhile
Click to expand...
Click to collapse
yeah the download is good he just needs a different install script. i have not updated it to the jellybean installer. well actually i did check which one it used by default during the source build. the new download will have the updated script plus i will remove the market updater. even though this rom claims to be 2.3.8 it still requires an ancient market and will not run any other version. i will have to dig around and find a tweaked version of market to include also.
new update will be up within the next couple of hours. i am working on it now. also sorry about the dl size while digging around the rom i noticed the size of xbin (which is where busybox is) talk about a massive error there. rom should be a few hundred megs smaller next go round.
jlmancuso said:
yeah the download is good he just needs a different install script. i have not updated it to the jellybean installer. well actually i did check which one it used by default during the source build. the new download will have the updated script plus i will remove the market updater. even though this rom claims to be 2.3.8 it still requires an ancient market and will not run any other version. i will have to dig around and find a tweaked version of market to include also.
new update will be up within the next couple of hours. i am working on it now. also sorry about the dl size while digging around the rom i noticed the size of xbin (which is where busybox is) talk about a massive error there. rom should be a few hundred megs smaller next go round.
Click to expand...
Click to collapse
Man, I thought that was just me: "What the......is there a 'War and Peace' option on this ROM? Man, that's a big file....." Now I just have to exercise restraint and wait for the update, was part-way through dl'ing Beta 2 and it borked on me. Itching to try this one out
I
Joshmccullough said:
Man, I thought that was just me: "What the......is there a 'War and Peace' option on this ROM? Man, that's a big file....." Now I just have to exercise restraint and wait for the update, was part-way through dl'ing Beta 2 and it borked on me. Itching to try this one out
Click to expand...
Click to collapse
Again sorry about the size of that one. At 4 am it is hard to remember to check all that stuff. I have beta 2.1 setup and I am testing it now. Although this is still a large rom at 317 megs it is better than that 560+ bs of beta 2. Also just about every extra app I added is located in the data partition so if you dont want or need it you can easily uninstall it.
The update will be done shortly I have to do a bit of work to get the installer script squared away since I am converting it over to the JB binary. With luck it will be on the servers before 3 PM CST!
Edit: Bad news for yall status 7 people. The JB binary is having issues with this rom. I am going to try making a new kind of install and see it I can get yall on this too. It will be flashed from the bootloader like a RUU if I can make it work. Keep your eye out for the beta 2.1 RUU style release. Until then yall are still a no go on CyanMobile. SORRY
Well this sucks. Started upload over hour ago and only at 5% with estimated 6+ hrs remaining. Going to try uploading from my cell with es file explorers sftp feature. Might only take two hours that way.
jlmancuso said:
I
Again sorry about the size of that one. At 4 am it is hard to remember to check all that stuff. I have beta 2.1 setup and I am testing it now. Although this is still a large rom at 317 megs it is better than that 560+ bs of beta 2. Also just about every extra app I added is located in the data partition so if you dont want or need it you can easily uninstall it.
The update will be done shortly I have to do a bit of work to get the installer script squared away since I am converting it over to the JB binary. With luck it will be on the servers before 3 PM CST!
Edit: Bad news for yall status 7 people. The JB binary is having issues with this rom. I am going to try making a new kind of install and see it I can get yall on this too. It will be flashed from the bootloader like a RUU if I can make it work. Keep your eye out for the beta 2.1 RUU style release. Until then yall are still a no go on CyanMobile. SORRY
Well this sucks. Started upload over hour ago and only at 5% with estimated 6+ hrs remaining. Going to try uploading from my cell with es file explorers sftp feature. Might only take two hours that way.
Click to expand...
Click to collapse
I was just kidding about the file size, nothing but respect for devs, here. Can't wait to try this out, good things come to those who wait, I figure...
Sent from my PC36100 using Tapatalk 2